Professional Documents
Culture Documents
Medical Gas Pipeline Solution -SkyFavor Medicacl
Medical Gas Pipeline Solution -SkyFavor Medicacl
Medical Gas Pipeline Solution -SkyFavor Medicacl
SkyFavor medical oxygen generator system could supply pure oxygen for all kinds of hospitals and
clinics continuously. Medical oxygen generators system use Pressure Swing Adsorption (PSA)
technology to separate the oxygen from air. Our oxygen plant equipment put the air as raw material,
zeolite molecular sieve as adsorbent, under the normal temperature low pressure, using the selectivity of
zeolite molecular sieve for oxygen adsorption. The purity is 93%±3%.
Features
High reliability: Proven PSA technologies such as big
flange structure, snowstorm filling, gas distribution
system, gas speed control technology, unequal pressure
balance system,etc make our gas nitrogen generator more
reliable
Easy installation: Skid structure, fully assembled and test
qualified before delivery
Convenient operation: With a simple touch on the touch
screen, machine starts to run
Minimized maintenance: After 8000 hours operation,
simply replace the three filter elements and activated
carbon for air treatment part, no other regular
maintenance needed
Technical index
23
PSA Oxygen Generator
Main Parts
Air compressor
Air compressor provides compressed air source for whole system, the flow and pressure are to be
decided by the desired nitrogen flow rate, purity, outlet pressure.
Air tank
It quickly increases the pressure of adsorption tower;
It also stores gas for air compressor, buffers system pressuree;
Oxygen separator
The oxygen is separated from compressed air, sent to buffer tank as produced gas. Nitrogen, carbon
dioxide, argon, etc. are discharge from muffler as exhausted gases.
24
Medical Vacuum System
SkyFavor medical vacuum system consists of vacuum pumps, receiver tank, control panel, pipes,
valves and base, etc. which is fully meet with NFPA 99 and also manufactured in ISO9001,
ISO14001, ISO13485, ISO45001 system. The vacuum pump is available in both oil-lubricated rotary
vane and oil-free claw type.
The system is skid mounted with compact component layout, easy for use, installation and
maintenance.
Up to six vacuum pumps can be connected in one system to meet hospital flow demand.
Each vacuum pump is equipped with filter, unloading valve, check valve and temperature sensor, to
ensure the reliability and quality.
25
Medical Vacuum System
Remark:
1. The vacuum plant is operated at an ambient temperature of 0-40 °C. Please contact our company for
special environmental temperature requirements.
2. The above system capacity measured at pressure -60kPa.
3. The above system capacity is for working vacuum pump, not including the vacuum pump on standby.
4. The above configurations are for regular, if any other specifications, please contact our staff.
26
Medical Air Compressing System
Remark:
1. The air plant is operated at an ambient temperature of 0-40 °C. Please contact our company for
special environmental temperature requirements.
2. System flows shown are measured at pressure 0.5mPa.
3. The above system capacity is for working compressor, not including the compressor on standby.
4. For dimensions, Length refers to measurement of monitor display side.
5. Noise level measured at a distance of 1 meter.
28
Each pump System Capacity Noise Level Dimensions Weight
System Model No.
KW M3/min dB(A) CM KG
30