Professional Documents
Culture Documents
Moana amii
Moana amii
CROCHET DOLL
MOANA
Contents
1. About me
2. Introduction
3. Supplies
4. Abbreviations
5. Process description
6. Conclusion
MR - Magic Ring
sc - single crochet
ch - chain
dec - decrease
inc - increase
hdc - half double crochet
dc - double crochet
sl st - slip stitch
BLO - Back loop only
FLO - Front loop only
(..) * - repeat instructions in brackets with the required number of
times
Arm
Caramel thread color.
2 pieces.
Don’t fill with fiber.
1 row: 5 sc in MR
2 row: 5 inc (10)
3 row: 10 sc
4 row: 1 (3 dc bobble) - 9 sc (10)
5 row: (1 dec - 3 sc)*2 (8) (the 1st dec exactly above 3 dc bobble)
6 - 13 row (8 rows): 8 sc
14 row: 2 sc - 1 inc - 3 sc - 1 inc - 1 sc (10) (inc at the sides)
15 - 21 row (7 rows): 10 sc
22 row: 3 sc - 1 inc - 4 sc - 1 inc - 1 sc (12) (inc at the sides)
23 - 27 row (5 rows): 12 sc
If it's necessary work shifting sc to finish the work along the inner part
of the arm (from different sides of right and left arms).
Fix and cut thread, hide tail thread.
HEEL
8 row: 20 sc
Cut and insert the insole (you can glue it) inside the foot.
9 row: (2 sc - 1 dec)*5 (15)
10 - 13 row (4 rows): 15 sc
WIRE SKELETON
Attach green thread color in FLO of the 13th row (point “2” in the
photo), crochet by the scheme, using jaquard technique (don’t cut
unworking thread, but crochet together with working one). There are
some abbreviations on next row to make the process easier: "g." - green
thread color, "bp" - bright-pink thread color.
1 row: (g.2 inc - bp (1 sc - 2 ch - 1 sc in the same stitch))*5
Fix and cut thread, hide tail thread.
Skirt
1 layer:
Attach beige thread color to FLO of the 51st row (point “3” in the
photo) and crochet by the scheme.
1 row: 3 sc - 1 inc - (6 sc - 1 inc)*5 - 3 sc (48)
2 row: 48 sc
3 row: (7 sc - 1 inc)*6 (54)
4 row: 54 sc
5 row: 4 sc - 1 inc - (8 sc - 1 inc)*5 - 4 sc (60)
Fix and cut thread, hide tail thread.
Attach beige thread color to the 39th loop of the 5th row (the 1st skirt
layer) - point “4” in the photo - and crochet in turning rows:
6 row: FLO 60 sc, 1 ch, turn the work
7 row: 1 dec - 56 sc - 1 dec, 2 ch, turn the work (58)
8 row: 1 dec in dc - 23 dc - 8 hdc - 23 sc - 1 dec in sc, 1 ch, turn the
work (56)
9 row: (1 sc - 4 ch - sl st in the 3rd ch - 2 ch, skip 1 sc - 2 sc)*14
Fix and cut thread, hide tail thread.
2 layer:
Attach beige thread color at the side BLO of the 5th row (point “5” in
the photo) and crochet by the scheme:
1 - 2 row (2 rows): 60 sc
3 row: (9 sc - 1 inc)*6 (66)
4 - 6 row (3 rows): 66 sc
Fix and cut thread, hide tail thread.
Attach beige thread color to the 42nd loop of the 6th row (the 2nd skirt
layer) - point “6” in the photo - crochet by the scheme in turning rows.
Use jaquard technique: “m” - mustard thread color, “b” - beige thread
color.
7 row: FLO (b.1 sc - m.2 sc)*22, 1 ch, turn the work (66)
8 row: b.66 sc, 1 ch, turn the work
9 row: (m.2 sc - b.1 sc)*22, 1 ch, turn the work (66)
Cut mustard thread color.
10 - 11 row (2 rows): 66 sc, 1 ch, turn the work
12 row: 1 inc - 64 sc- 1 inc, 2 ch, turn the work (68)
13 row: 13 dc- 5 hdc - 50 sc, 1 ch, turn the work (68)
14 row: (1 sc - 4 ch - sl st in the 3rd ch - 2 ch, skip 1 sc - 2 sc)*17
Fix and cut thread, hide tail thread.
Fringe
Cut 66 pieces of sandy thread color of 4.68 inches long. Attach them to
FLO of the 6th row of the 2nd skirt layer (point “7” in the photo).
Make fringe fluffy with the help of velcro.
Tassel
Cut 31 pieces of beige thread color of 3.12 inches long. Attach them as
fringe. Attach tassels to sl st of the 9th row of the 1st skirt layer and to
14th row of the 2nd skirt layer (see the photo). Cut fringe to make
tassels of 0.58 inches long. Make tassels fluffy a bit.
Belt
Red thread color.
71 ch, turn the work, from the 2nd ch:
1 row: 70 sc, 1 ch, turn the work
2 row: 15 sc - 4 hdc - 4 dc - 25 tr - 2 dc - 2 hdc - 18 sc (70)
Fix and cut thread, leave long tail thread.
Necklace
Pendant: turquoise thread color: 6 sc in MR, 6 sl st. Fix
and cut thread. Leave long tail thread.
Cord: take a hook of less number, graphite thread color (divide thread in
halves): 25 ch. Fix and cut thread, leave tail thread. Sew the necklace to the
body.
Sew the belt to the skirt, place the ends overlapped (see the photo).
4 3 2 1
Ears
Caramel thread color.
2 pieces.
1 row: 6 sc in MR, 1 ch, turn the work
2 row: 6 sc
Fix and cut thread. Leave tail thread.
Decoration
Make eye contraction. Make contractions with beige thread. Insert a
needle in the bottom of the head, pull it out point 1 (see the photo),
insert a needle in point 2 and pull it out point 3, insert a needle in point
4 and pull it out the bottom of the head. Tighten tail threads and make
some strong knots. Hide tail threads inside the head. If it's necessary
repeat eye contraction.
Embroider the whites of the eye with white thread.
Embroider the eyelids in moulinet thread of black color.
Embroider the nose with yarn of caramel thread (1 sc lower than the
eye, 3 sc wide; don't make more than 2-3 stitches).
Embroider eyebrows with black thread color (1 row above the eyes, 4
sc wide).
Tint the cheeks and nose in oil pastel or blusher of pink color. Tint the
eyebrows in black oil pastel.
Sew the ears between 17 and 20 rows in the distance of 6 sc in from the
eyes.
Main piece
Green thread color.
65 ch, turn the work, from the 2nd ch.
1 - 64 petal (64 petals): (1 sc - 7 ch, turn the work, from the 2nd ch: 1
sl st - 1 sc - 2 hdc - 2 dc - 1 sc - 9 ch, turn the work, from the 2nd ch: 1
sl st - 2 sc - 2 hdc - 3 dc)*32
Fix and cut thread, leave tail thread of 7.8 inches long.
Take a piece of thread of green color of 7.8 inches long and attach it to
the opposite side of wreath to have tail thread at both sides of the
wreath.
Flowers
10 pieces. Take a hook of less number and divide thread in halves.
Bright pink thread color.
1 row: center: 5 sc in MR, 1 sl st
Change thread color into pink one.
2 row: (2 ch, 2 dc, 2 ch, 1 sl st)*5
Fix and cut all tail threads, exept one.
Link to the video on how to crochet flowers.
FLOWER
Sew flowers to wreath. Put it on the head and fix it under hair bun.
HEAD ATTACHMENT
5
Head
Pink thread color. Fill it with fiber in the process.
8 ch, turn the work, from the 2nd ch.
1 row: 3 sc - 3 sc in 1 ch - 9 sc (15)
2 row: BLO 15 sc
Change thread color into white one, cut pink thread.
3 row: 15 sc
4 row: 9 inc - (1 sc - 1 dec)*2 (22)
Use jaquard technique 5-8 rows with the following abbreviations: "w" -
white thread color, "g" - gray thread color.
5 row: w.(1 sc - 1 inc - (2 sc - 1 inc)*2 - 2 sc) - g.(1 inc - 2 sc) - w.(1
inc - 2 sc - 1 inc - 5 sc) (28)
6 row: w.((3 sc - 1 inc)*3 - 1 sc) - g.(2 sc- 1 inc - 1 sc) - w.(2 sc - 1 inc
- 3 sc - 1 inc - 4 sc) (34)
7 row: w.(2 sc - 1 inc - (4 sc - 1 inc)*2 - 3 sc) - g.(1 sc - 1 inc - 3 sc) -
w.(1 sc - 1 inc - 4 sc - 1 inc - 6 sc) (40)
If you use safety eyes, insert them between 5 and 6 rows with a
distance of 7 sc in between. Make sure, 7 sc is the distance between the
attached eyes.
8 row: w.(8 sc - 1 inc - 10 sc) - g.5 sc - w.(6 sc - 1 inc - 9 sc) (42)
Cut gray thread color.
9 - 12 row (4 rows): 42 sc
13 row: (5 sc - 1 dec)*6 (36)
14 row: 2 sc - 1 dec - (4 sc - 1 dec )*5 - 2 sc (30)
15 row: (3 sc - 1 dec)*6 (24)
16 row: 1 sc - 1 dec - (2 sc - 1 dec)*5 - 1 sc (18)
17 row: (1 sc -1 dec)*6 (12)
18 row: 6 dec (6)
Tighten the hole, fix and cut thread, hide tail thread.
Make eye contraction in white thread color (as for the doll). You can
make contraction under the snout (point “5” in the photo).
Blade
2 pieces.
Sandy thread color. Don’t fill with fiber.
2 ch, turn the work, from the 2nd ch.
1 row: 1 sc, 1 ch, turn the work
2 row: 1 inc, 1 ch, turn the work (2)
3 row: 2 inc, 1 ch, turn the work (4)
4 - 5 row (2 rows): 4 sc, 1 ch, turn the work
6 row: 1 inc - 2 sc - 1 inc, 1 ch, turn the work (6)
7 - 8 row (2 rows): 6 sc, 1 ch, turn the work
9 row: 1 inc - 4 sc - 1 inc, 1 ch, turn the work (8)
10 - 22 row (13 rows): 8 sc, 1 ch, turn the work
23 row: 1 dec - 4 sc - 1 dec, 1 ch, turn the work (6)
24 row: 1 dec - 2 sc - 1 dec, 1 ch, turn the work (4)
25 row: 4 sc
Fix and cut thread along one piece. Insert a piece of plastic.
Cut a piece of blade’s size, glue it to one piece.
Attach both pieces in sl st along right side, the top of the blade and then
along left side. Don’t attach the bottom of the blade.
Take a piece of wire of about 15.6 inches long. Fold in halves and twist it.
Insert inside the blade and fix with some strong glue.
Crochet the shaft, fill it with fiber in the process.
Shaft
Go on crocheting along both side of the blade:
26 - 80 row (54 rows): 8 sc
Check to your work, the legth of the shaft must be 6.63 inches long.
Tighten the hole, fix and cut thread. Hide tail thread.
If you publish the photos of your completed doll on Instagram, please tag me
@pollytoys_crochet
@pollytoys_crochet
d.lobacheva25@gmail.com
+7(905)7226704
Daria,
@pollytoys_crochet