Professional Documents
Culture Documents
Hybrid AIR Description
Hybrid AIR Description
Description
Ge22577B
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design and manufacturing. Ericsson shall
have no liability for any error or damage of any kind resulting from the use of this
document.
Trademark List
All trademarks mentioned herein are the property of their respective owners.
These are shown in the document Trademark Information.
Contents
1 Product Overview 1
1.1 Main Features 1
1.2 Required Installation Equipment 1
2 Technical Data 3
2.1 Bands, Carriers, and Output Power 3
2.2 Passive Antenna 5
2.3 Physical Characteristics 10
2.4 Installation Requirements 18
2.5 Installation Alternatives 18
2.6 Space Requirements 19
2.7 Wind Load 19
2.8 Acoustic Noise 22
2.9 Environmental Characteristics 22
2.10 Power Supply Characteristics 24
2.11 System Characteristics 24
3 Hardware Architecture 25
3.1 Hybrid AIR Unit Parts 25
4 Connection Interfaces 26
4.1 Grounding Interface 26
1 Product Overview
The Hybrid AIR unit is designed for outdoor installations, intended for pole
mounting.
For general information on the AIR product, see Antenna Integrated Radio Unit
Description in the Hardware Antenna System, Battery, Enclosure, Power, Radio,
RAN Compute library.
— eCPRI
Passive Unit
2 Technical Data
This section describes the physical characteristics, environmental data, and the
power supply characteristics of the Hybrid AIR unit.
Description Value
AIR 6449 B78M NR: Up to two
LTE: Up to three
Mixed mode: Up to four
Frequency AIR 3227 B42 NR, LTE: 3400–3600
(2)
MHz
AIR 3227 B43 NR: 3600–3800 MHz
AIR 3227 B78T NR: 3410–3610 MHz
AIR 3278 B78K NR: 3420–3800 MHz
AIR 6449 B42 NR, LTE: 3400–3600
MHz
AIR 6449 B43 NR, LTE: 3600–3800
MHz
AIR 6449 B77D NR: 3700–3980 MHz
AIR 6449 B78M NR (single and mixed
mode), LTE: 3450–
3650 MHz
16 Port Antenna R1 698–960 MHz
800482021 R2 698–960 MHz
B1 1427–2180 MHz
B2 1427–2180 MHz
Y1 2490–2690 MHz
Y2 1695–2690 MHz
Y3 1695–2690 MHz
Y4 2490–2690 MHz
16 Port Antenna R1 698–960 MHz
800442008 R2 698–960 MHz
Y1 1695–2690 MHz
Y2 1427–2690 MHz
Y3 1695–2690 MHz
Y4 2490–2690 MHz
Y5 1695–2690 MHz
Y6 1427–2690 MHz
12 Port Antenna R1 698–960 MHz
800482001 R2 698–960 MHz
800482002 Y1 1427–2690 MHz
Description Value
Y2 1695–2690 MHz
Y3 1695–2690 MHz
Y4 1427–2690 MHz
10 Port Antenna R1 698–960 MHz
800442004 R2 698–960 MHz
Y1 1427–2690 MHz
Y2 1695–2690 MHz
Y3 1427–2690 MHz
(1) For detailed information about licenses and HWAC, see:
NR: Manage Licenses and Hardware Activation Codes in the NR RAN library.
LTE: Manage Licenses and Hardware Activation Codes in the LTE RAN library.
(2) For information about IBW, see Radio Node Configurations.
L 1 L 5 C 7 R 9 R 3
698 960 1427 2690 1695 2690 1427 2690 698 960
L 2 L 6 C 8 R 10 R 4
698 960 1427 2690 1695 2690 1427 2690 698 960
Ge22708B
10-Port R1 R2 Y1 Y2 Y3
Antenna
Dual X X X X X
Polarizatio
n
HPBW 65° 65° 65° 65° 65°
Gain (dBi) 14.7 14.6 17.8 17.7 17.6
Adjust. 2°–14° 2°–14° 2°–12° 2°–12° 2°–12°
Electrical
Downtilt
L 5 CL 7 L 1 R 3 CR 9 R 11
1427 2690 1695 2690 698 960 698 960 1695 2690 1427 2690
L 6 CL 8 L 2 R 4 CR 10 R 12
1427 2690 1695 2690 698 960 698 960 1695 2690 1427 2690
Ge22709C
L 5 L 9 CL 11 L 1 R 3 CR 13 R 15 R 7
1427 2180 2490 2690 1695 2690 698 960 698 960 1695 2690 2490 2690 1427 2180
L 6 L 10 CL 12 L 2 R 4 CR 14 R 16 R 8
1427 2180 2490 2690 1695 2690 698 960 698 960 1695 2690 2490 2690 1427 2180
Ge20039B
L 5 L 6 R 13 R 14
1695 2690 1695 2690 1695 2690 1695 2690
L 1 L 7 C 9 C 11 R 15 R 3
698 960 1427 2690 1695 2690 1695 2690 1427 2690 698 960
L 2 L 8 C 10 C 12 R 16 R 4
698 960 1427 2690 1695 2690 1695 2690 1427 2690 698 960
Ge23064A
Left Right
Y1+ Y2+ R1+ R2+ Y3+ Y4+
L 5 CL 7 L 1 R 3 CR 9 R 11
1427 2690 1695 2690 698 960 698 960 1695 2690 1427 2690
L 6 CL 8 L 2 R 4 CR 10 R 12
1427 2690 1695 2690 698 960 698 960 1695 2690 1427 2690
Ge23211A
W D
Ge22800B
Ge23069A
Note: Mounting clamps are used in combination with the down tilt or azimuth
adjustment kit.
Ge22561B
1 0 ° – 12 °
2
The sound pressure level when operating on low capacity is less than 28 dBA at
1-meter distance and hemispherical distribution, and 25 dBA for spherical
distribution.
2.9.3 Vibration
The Hybrid AIR unit complies with the following vibration standard.
— Earthquake zone 4
2.9.4 Materials
All Ericsson products fulfill the legal, market, and Ericsson requirements
regarding the following:
— Material declaration
— Recycling
2.11.1 Software
For information on software dependencies, see Radio Software Support in the
Ericsson Radio System Hardware - Antenna System, Enclosure, Integrated Site
Solutions, Network Synchronization, Power, Radio, RAN Compute and RBS
library collection.
3 Hardware Architecture
This section describes the Hybrid AIR unit hardware structure regardless of
configuration.
Ge22829A
4 Connection Interfaces
For more information on the power supply, optical, sync, EV light, and TX monitor
interface, and optical indicators see Install Antenna Integrated Radio Units in the
Hardware Antenna System, Battery, Enclosure, Power, Radio, RAN Compute
library.
Declaration of Conformity
"Hereby, Ericsson AB, declares that this Product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU
and 2011/65/EU."
Corrosion IEC/UL60950-22
ISO 21207 method B
UV Resistance IEC 60950-22
Impact Test IEC/UL60950-22
Flammability UL94-HB
Passive Inter Modulation IM3
Europe
International
— IEC 62368-1
— UL 62368-1