Professional Documents
Culture Documents
Pompa Lumpur_SEG4012250B_
Pompa Lumpur_SEG4012250B_
Created by:
Phone:
Date: 17/11/2023
Qty. Description
1 SEG.40.12.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port,
specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder
system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter.
SEG grinder pumps are ideal for use in sparsely populated areas, where gravity sewage systems are not available.
Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has
advantages.
The pump is available for two types of installation:
• submerged installation on auto-coupling systems
• submerged installation, free-standing.
The pump is made of wear-resistant materials, such as cast iron and stainless steel.
These materials ensure reliable operation.
The surface of the pump is smooth to prevent dirt and impurities from sticking.
The corrosion-resistant stainless steel clamp is securing the motor to the pump housing and allow the easy service of
the pump.
SmartTrim system allows easy adjustment of the impeller clearance to ensure maximum efficiency during the pump
lifespan.
The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining
peak performance throughout the lifespan of the system.
Controls:
Moisture sensor: without moisture sensors
AUTOADAPT: NO
Liquid:
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 20 °C
Density: 1000 kg/m³
Technical:
Actual calculated flow: 6.75 m³/h
Resulting head of the pump: 17.73 m
Type of impeller: Grinder system
Primary shaft seal: SIC/SIC
Approvals: PA-I
Curve tolerance: ISO9906:2012 3B2
Materials:
Pump housing: Cast iron
EN1561 EN-GJL-200
Impeller: Cast iron
EN1561 EN-GJL-200
Installation:
Date: 17/11/2023
Qty. Description
1 Maximum ambient temperature: 40 °C
Maximum operating pressure: 6 bar
Flange standard: DIN
Pipework connection: DN 40/50
Pump outlet: DN 40
Pressure rating: PN 10
Maximum installation depth: 7m
Auto-coupling: 96076063
Electrical data:
Power input - P1: 1.6 kW
Rated power - P2: 1.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 400-415 V
Voltage tolerance: +6/-10 %
Max starts per hour: 30
Rated current: 3A
Starting current: 21 A
Rated current at no load: 2.1 A
Cos phi - power factor: 0.81
Cos phi - p.f. at 3/4 load: 0.72
Cos phi - p.f. at 1/2 load: 0.58
Rated speed: 2750 rpm
Moment of inertia: 0.0038 kg m²
Motor efficiency at full load: 73 %
Motor efficiency at 3/4 load: 71 %
Motor efficiency at 1/2 load: 66 %
Number of poles: 2
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Explosion proof: no
Length of cable: 10 m
Cable type: 07RN8-F
Type of cable plug: No plug
Others:
Net weight: 42.5 kg
Danish VVS No.: 391342131
Swedish RSK No.: 5885829
Finnish LVI No.: 4836103
Norwegian NRF no.: 9045801
Date: 17/11/2023
Qty. Description
1 LC 231
The LC 231 level controllers offer a comprehensive range of features for control and monitoring of pumps in
wastewater, water supply and drainage systems.
The LC 231 pump controllers are designed for level control, monitoring and protection of Grundfos pumping systems
one pumps
or two pumps starting direct-on-line.
The LC 231 pump controllers can be used in various type of empty application e.g. waste water transport, drainage or
tank filling in water supply.
The set-up of the control is easily done either by the predefined application settings or via the step-by-step
start-up wizard in the intuitive Grundfos GO app, using Bluetooth Smart technology.
With the Grundfos GO app, all detailed pump settings can be easily being configured, monitored and commissioned.
Even without using the app, you have the option directly from display to change the operation mode from auto
to manual start/stop and adjusting the level setting.
The controller is equipped with configurable input/output terminals, giving full flexibility for all applications.
Daily control, supervision and commissioning is straightforward with the intuitive and easy- to-use user interface.
This saves you valuable time when getting started, and in your daily interaction with pumps and the controller.
The controller integrates seamlessly into the Grundfos range of communication modules, ensuring an
easy fit into any supervisory system such as SCADA or Grundfos CLOUD.
With the built-in certified motor protection, and the current measurement, the LC 231 pump controller provide a
service indicator function
hat helps keep track of when service is needed.
The controller maintains a detailed alarm and warning log with the last 20 alerts.
The alarm log can be accessed remotely via SCADA or Grundfos CLOUD. You can also use Grundfos GO to inspect
the logs in localized,
translated text for easy troubleshooting and remedial measures at the pumping station.
• Control of 1 or 2 pumps based on signals from sensor input (analog, 0-5 V, 0.5-3.5V, 0-10 V, 0-20 mA, 4-20 mA or
digital, float switch)
• Support up to five control levels for both analogue level transmitter or float switch operation
• Supports simple application where only one float switch is present - single float switch operation.
• Configurable input/output terminals that can be used as digital input/output, analogue input and Pt 100/1000 inputs
for flexible use in the actual application
• Prevent the pumps with anti-seizing from choking or seizing due to limestone build-up or other deposits
• Prevent the mains load when several pumping stations are started up at the same time with power-on delay.
• Protection against water hammer as quick restart/simultaneous start is blocked and delayed
Date: 17/11/2023
Qty. Description
1 • Selection of automatic alarm resetting
• Setting of stop delays matching the actual operating conditions
• Shows the actual liquid level
• Alarm indication via a build in buzzer
As standard, the LC 231 controller has two alarm relays that can be configured using Grundfos GO to show a variety
of status
information on a supervisory system or PLC.
Controls:
Current measurement (Yes/No): Y
Technical:
Approvals: cULus
Number of pumps: 1
Materials:
Cabinet: Plastic
Installation:
Range of ambient temperature: -25 .. 45 °C
Cabinet mounting: Wall mounting
Earth connection: N, PE
Electrical data:
Mains frequency: 50 / 60 Hz
Rated voltage 2.nd value: 1 x 110-240 V [3 x 200-460 V]
Rated current: 1-9.6 A
Capacitor size - run: N/A µF
N/A µF
Method of start: Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP54
Back-up fuse required: 16 A
Required Cos phi full load: 0.86-1.00
Others:
Net weight: 1.81 kg
Gross weight: 2.45 kg
Shipping volume: 0.015 m³
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
H SEG.40.12.2.50B, 3*400 V, 50Hz eta
[m] [%]
65
24 60
22 55
20 50
18 45
16 40
14 35
12 30
10 25
8 20
6 15
4 10
2 5
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Q [m³/h]
Q = 6.75 m³/h
H = 17.73 m
Liquid temperature during operation = 20 °C
Eta pump = 33.7 %
Eta pump+motor = 24.1 %
P
[kW]
2.0
1.8
P1
1.6
1.4
1.2 P2
1.0
0.8
0.6
0.4
0.2
0
P1 = 1.356 kW
P2 = 0.969 kW
Date: 17/11/2023
H SEG.40.12.2.50B, 3*400 V, 50Hz eta
Description Value [m] [%]
General information: 24 60
Product name: SEG.40.12.2.50B 22 55
Product No: 96075905
20 50
EAN number: 5700394850780
18 45
Technical:
16 40
Actual calculated flow: 6.75 m³/h
14 35
Max flow: 15 m³/h
12 30
Resulting head of the pump: 17.73 m
Head max: 20.7 m 10 25
Approvals: PA-I 4 10
Curve tolerance: ISO9906:2012 3B2 2 5
Materials: 0 0
0 2 4 6 8 10 12 Q [m³/h]
Pump housing: Cast iron
Q = 6.75 m³/h
Pump housing: EN1561 EN-GJL-200
H = 17.73 m
Impeller: Cast iron Liquid temperature during operation = 20 °C
Eta pump = 33.7 %
Impeller: EN1561 EN-GJL-200
Eta pump+motor = 24.1 %
Installation: P
[kW]
Maximum ambient temperature: 40 °C
P1
Maximum operating pressure: 6 bar
1.5
Flange standard: DIN
Pipework connection: DN 40/50 P2
1.0
Pump outlet: DN 40
Pressure rating: PN 10 0.5
Maximum installation depth: 7m
Inst dry/wet: SUBMERGED 0
Auto-coupling: 96076063 P1 = 1.356 kW
P2 = 0.969 kW
Liquid:
Liquid temperature range: 0 .. 40 °C
Selected liquid temperature: 20 °C
100
134
Mains frequency: 50 Hz
Rated voltage: 3 x 400-415 V
68
214
Starting current: 21 A
120
600
216
Date: 17/11/2023
Description Value
Cable type: 07RN8-F
Type of cable plug: No plug
Controls:
Control box: not included
Additional I/O: External
Moisture sensor: without moisture sensors
AUTOADAPT: NO
Others:
Net weight: 42.5 kg
Danish VVS No.: 391342131
Swedish RSK No.: 5885829
Finnish LVI No.: 4836103
Norwegian NRF no.: 9045801
Date: 17/11/2023
Description Value
General information:
Product name: LC 231 1 x 1-9,6 DOL PI
Product No: 99369651
EAN number: 5713827986703
Price: EUR 1264.03
Technical:
Approvals: cULus
Number of pumps: 1
Materials:
Cabinet: Plastic
Installation:
Range of ambient temperature: -25 .. 45 °C
Cabinet mounting: Wall mounting
215 (8.5")
165 (6.5")
Earth connection: N, PE
Electrical data:
Mains frequency: 50 / 60 Hz
Rated voltage 2.nd value: 1 x 110-240 V [3 x 200-460 V]
Rated current: 1-9.6 A
Capacitor size - run: N/A µF 255 (10.0") 115 (4.5")
Capacitor size - run: N/A µF 280 (11.0")
Method of start: Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP54
Back-up fuse required: 16 A
Required Cos phi full load: 0.86-1.00
Controls:
Current measurement (Yes/No): Y
Others:
Net weight: 1.81 kg
Gross weight: 2.45 kg
Shipping volume: 0.015 m³
Sales region: Namreg
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
100
134
RP 1 1/2"
365
RP 1 1/2"
546
68
214
271 M16
120
600
216
100
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
374
70
3/4"-1"
90
546
RP 1 1/2"
68
221
118
115
216
99
424
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
123
466
40
71
154
255
216
99
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
123
510
40
116
154
255
216
99
Date: 17/11/2023
99369651 LC 231
115 (4.5")
255 (10.0")
280 (11.0")
165 (6.5")
215 (8.5")
Date: 17/11/2023
96075905 SEG.40.12.2.50B 50 Hz
Date: 17/11/2023
Installation and Input Sizing Results
Product number: 96075905
Type: SEG.40.12.2.50B
Flow: 6.75 m³/h (4000)
H total: 17.73 m ( +11%)
Power P1: 1.356 kW
Power P2 required in the duty point: 0.969 kW
Max starts per hour: 30
NPSH required: 10 m
Eta pump: 33.7 %
Eta motor: 71.5 %
Eta total: 24.1 %
Speed: 2750 rpm
Energy consumption: 810 kWh/Year
Phase: 3
Voltage: 400-415
Frequency: 50 Hz
Current (rated): 3A
Type of impeller: Grinder system
Size, pump outlet: DN 40
Pressure stage, pipe connection: PN 10
Maximum installation depth: 7m
starting method: direct-on-line
Max starts per hour: 30
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Ex-protection: no
Net weigth: 42.5 kg
Load profile
1
Flow (%) 167
Flow (m³/h) 6.681
Head (%) 111
Head (m) 17.79
P1 (kW) 1.353
Eta total (%) 23.9
Time (h/a) 599
Energy consumption (kWh/Year) 810
Quantity 1
20 50
100
18 45
16 40
365
14 35
271
12 30
10 25
RP 1 1/2"
RP 1 1/2"
134 214
8 20
6 15
4 10
2 Eta pump = 33.7 % 5
Eta pump+motor = 24.1 %
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Q [m³/h]
P
[kW]
P1
1.5
P2
1.0
0.5 P1 = 1.356 kW
P2 = 0.969 kW
0