Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

C8051F380/1/2/3/4/5/6/7/C

Full Speed USB Flash MCU Family

Analog Peripherals High Speed 8051 µC Core


- 10-Bit ADC (C8051F380/1/2/3/C only) - Pipelined instruction architecture; executes 70% of
• Up to 500 ksps instructions in 1 or 2 system clocks
• Built-in analog multiplexer with single-ended and - Up to 48 MIPS operation
differential mode
• VREF from external pin, internal reference, or VDD
- Expanded interrupt handler
• Built-in temperature sensor Memory
• External conversion start input option - 4352 or 2304 Bytes RAM
- Two comparators - 64, 32, or 16 kB Flash; In-system programmable in
- Internal voltage reference (C8051F380/1/2/3/C only) 512-byte sectors
- Brown-out detector and POR Circuitry Digital Peripherals
USB Function Controller - 40/25 Port I/O; All 5 V tolerant with high sink current
- USB specification 2.0 compliant
- Hardware enhanced SPI™, two I2C/SMBus™, and two
- Full speed (12 Mbps) or low speed (1.5 Mbps) operation enhanced UART serial ports
- Integrated clock recovery; no external crystal required for - Six general purpose 16-bit counter/timers
full speed or low speed
- 16-bit programmable counter array (PCA) with five cap-
- Supports eight flexible endpoints ture/compare modules
- 1 kB USB buffer memory - External Memory Interface (EMIF)
- Integrated transceiver; no external resistors required Clock Sources
On-Chip Debug - Internal Oscillator: ±0.25% accuracy with clock recovery
- On-chip debug circuitry facilitates full speed, non-intru- enabled. Supports all USB and UART modes
sive in-system debug (No emulator required) - External Oscillator: Crystal, RC, C, or clock (1 or 2 Pin
- Provides breakpoints, single stepping, modes)
inspect/modify memory and registers - Low Frequency (80 kHz) Internal Oscillator
- Superior performance to emulation systems using - Can switch between clock sources on-the-fly
ICE-chips, target pods, and sockets
Packages
Voltage Supply Input: 2.7 to 5.25 V - 48-pin TQFP (C8051F380/2/4/6)
- Voltages from 2.7 to 5.25 V supported using On-Chip
Voltage Regulators - 32-pin LQFP (C8051F381/3/5/7/C)
- 5x5 mm 32-pin QFN (C8051F381/3/5/7/C)
Temperature Range: –40 to +85 °C

ANALOG DIGITAL I/O


PERIPHERALS UART0 Port 0
UART1
CROSSBAR

A +
10-bit SPI Port 1
Ext. Memory I/F

M +
U
500 ksps - SMBus0
ADC - SMBus1 Port 2
X
PCA
Port 3
6 Timers
TEMP VREG
VREF Port 4
SENSOR 48 Pin Only
C8051F380/1/2/3 Only

PRECISION INTERNAL USB Controller /


OSCILLATORS Transceiver

HIGH-SPEED CONTROLLER CORE


64/32 kB 8051 CPU
4/2 kB RAM
ISP FLASH 48 MIPS
FLEXIBLE DEBUG
POR WDT
INTERRUPTS CIRCUITRY

Rev. 1.5 3/19 Copyright © 2019 by Silicon Laboratories C8051F380/1/2/3/4/5/6/7/C

You might also like