Professional Documents
Culture Documents
Emaco Angle Hose Valves Catalogue
Emaco Angle Hose Valves Catalogue
Emaco Angle Hose Valves Catalogue
ANGLE
HOSE
VALVES
UL LISTED : EX27322
DESCRIPTION
EMACO Angle Hose valve feature all brass construction with forged or cast
bodies for rigidity and light weight. This Angle Hose Valve (90 degrees pattern)
are for use in rack assemblies on standpipe having inlet and outlet opening of
the same size or with the inlet larger than outlet or any other application which
requires a listed fire hose valve.
FEATURES
The valve is made in accordance with UL 668 Hose Valve for Fire Protection
Service standards.
Forged brass valve body with red hand wheel
Working pressure of 300 psi
Maximum test pressure of 600 psi
Optional finishes - polished brass, royal chrome plated, polished chrome
plated
NO DESCRIPTION MATERIALS
APPLICATION
Used with hose rack assembly or as a fire department outlet connection
INSTALLATION
Install in accordance with customary installation practices. Use an approved
thread sealant as Thread Sealing Paste with PTFE on the male threads to which
the valve is being installed. DO NOT OVER TIGHTEN. Over tightening of the
valve during installation to the male pipe threads may crack or deform the valve
body. Only use tools suitable for the installation of this product. Do not use pipe
wrench extenders to increase leverage on pipe wrenches. This may
result in valve damage as well as personal injury
** Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of
products may also appear different to those shown on this document. The images are copyright protected