Professional Documents
Culture Documents
TIKIDAN Acoustic Product Brochure (1)
TIKIDAN Acoustic Product Brochure (1)
ACUSTIDAN
Uses:
Used inside Plasterboard Chambers on Walls and Ceilingsto Improve Low Frequency Sound
Insulation in Shops, Discotheques, Bars, Cinema Theatres, Hotels, HousingProjects and
other Areas.
Used around Periphery of DrainPipes to Acoustically Isolate it From Surroundings.
Advantages:
High-Density Membrane
Excellent Thermal and Acoustic Performance
Dual Function of Noise Absorbing and Dampening
Dimensional Stability
Excellent Acoustic Performance at Lower Thickness – Saving in ValuableLiving Space Porous Textile Material
Excellent Flexibility – Ease of Application on Complex Architectural Profiles, Corners, Round Pillars etc.
Prevents Sound Leakage from Recesses achieving desiredAcoustic Performance
HighTensile and Tear Strength enables Easy Fixing Mechanically
Eliminates needfor applying Thick BondingAdhesive - Saving in Valuable Living Space
THERMAL AIRBORNE
TRADE MARK THICKNESS ROLL SIZE SQ. MTR. /PALLET WEIGHT RESISTANCE (R) SOUNDINSULATION RW
DANOFON
DANOFON is aMulti-Layer Composite Panel made of a High Density Elastomeric Membrane Sandwiched between Phenolic Resin
Bonded Thick Porous Textile Layer. Acoustically it works as a Low, Mediumand High Frequency Sound Insulation.
Uses:
Used Inside Cavity Walls and Suspended Ceilings to Improve Sound Insulation at Low, Medium and HighFrequencies in Porous Textile Material
CommercialPremises, Bars, Super Markets, Residential Houses, Restaurants, Industrial Buildings and other Areas.
TECHNICAL DATA
AIR BORNE
TRADE MARK THICKNESS ROLL SIZE SQ. MTR. /PALLET WEIGHT SOUND INSULATION RW
80
F (Hz) DaT (dB)
70
60 125 45.5
50 250 47
DnT (dB)
40
500 55
30
1K 58.5
20
2K 64
10
0 4K 69.5 Insulation Fixing
1.6k
2.5k
100
160
250
400
630
Cement Plaster
1k
4k
Brick Wall
Frequency (Hz)
40
500 50
30
1K 53
20
10 2K 59
0 4K 68
1.6k
2.5k
100
160
250
400
630
1k
4k
Frequency (Hz)
INSTALLATION PROCEDURE
FONODAN BJ
FONODAN BJ is a Multi-Layer Self-Adhesive Tape made of a Chemically Cross Linked Polyethylene Thermally Bondedto High
Density Elastomeric Membrane. Acoustically, it works as a Sound Insulating Cover over Pipes and Conduits.
Uses:
Used to Acoustically Insulate Pipes, Conduits, Siphon Tubes and Dampenthe Unpleasant NoiseGeneratedby Flowing Fluid
especially at Elbows, Junctions, and Spout Corners.
Advantages:
Decreases Unpleasant Noises Produced by the Internal Friction of Fluids in the Down Spout
Low Thickness of 3.9mm makes it Highly Suitable for Applicationover ComplexPipe Matrix
Self-Adhesive Configurationmakes Application Easier and User Friendly Saving Cost of Application, Auxiliaries and Handling
Pre-Fabricated ConfigurationReduces Material Wastage during Applicationmaking it Cost Effective
Provides EnhancedAcoustic Performance at Areas of Maximum NoiseLevel Generatedby FluidImpact at Joints, Elbows,
Bends and Junctions
Reduces Noise Generatedfrom Siphon Tube and Pipes taken down within False Ceilings and Inspection Chambers High-Density Membrane
Possesses Anti-Resonant Property and Dampens Vibrationsby ProvidingAcoustic Mass to the Pipe. Cross Linked Polyethylene
TECHNICAL DATA
Thickness 4 mm EN1923
INSTALLATION PROCEDURE
1 2 3 4 5
Cut roll to downspout length Remove Release Paper. Fit the part with the Secure with FONODAN® Secure with zip ties.
taking care to not make the self-adhesive side facing 130 tape.
band dirty. Downspout.
80
70 F (Hz) IL (dB)
60 125 11.5
50 250 11.5
40
IL (dB)
500 18.5
30
20 1K 16.5
10 2K 18
0
4K 25
1.6k
2.5k
100
160
250
400
630
1k
4k
60
50
40
Without Insulation Insert Loss
IL = 17 dBA
IL (dB)
30
20
10 With FONODAN BJ
0
100
160
250
400
630
1K
1.6K
2.5K
4K
Frequency (Hz)
ACOUSTIC INSULATION Sound Barrier M.A.D
M.A.D–Danosa Acoustic Membrane is High Density Membrane Sheet with HighSurface Density. Acoustically it works as a
Anti-Resonant Material and is Substitute for Lead Sheets.
Uses:
Used to Absorb and Reduce Mechanical Vibrations thereby Dampeningthe Noise
Used as SubstituteforLeadSheetsin between Plaster Boards, WoodenBoards, Metallic Sheets and Porous Insulating
Materials
Used for Increasing the OverallInsulation Efficiency of OtherInsulating Materials (Fibres, Rock Wool etc.) at Low Frequencies
Advantages:
Excellent Anti-Resonant Property
Provides better Acoustic Performance to Thin Walls
Transforms Acoustic Energy in to Dynamic thereby reducingLow Frequency Irritating Sound which are the most difficult to isolate
Increased Isolation at Low Frequencies enables Reductionin Size of AirChambers to Minimum thereby Increasing the
Usable Area and Saving in Spaces
Reduces Level of Radiated Noisewhen fitted to Panel Surfaces
HighUniform Surface Density Provides Acoustic Mass to Rigid and Metallic Elements and Dampens Vibrations, thereby
Effectively Lowering and Removing the Resonance Frequencies
Improves Overall Insulation Efficiency of OtherInsulating Materials at Low Frequencies Polyethylene Film
High Density Membrane
Self-Adhesive Configuration makes ApplicationEasier and User Friendly Saving Cost of Application, Auxiliaries and Handling Fibre Glass Reinforcement
Easier to Use, Cut and Trim and Quickto Install PE Film (or) Adhesive Layer
TRADE MARK THICKNESS ROLL SIZE ROLLS /PALLET WEIGHT ACOUSTIC IMPROVEMENT
M.A.D. 4
ROCDAN®
IMPACTODAN
Uses: IMPACTODAN ® BT
Advantages:
Economical Installation, Easy andEffective.
Durable Retention of Acoustic Properties and Efficiency even
Under Continuous Load and Fatigue Stresses.
Excellent Flexibility
Good Resistan ce to Tearing.
High Resistan ce to Moisture and Vapour Diffusion
High Impact Noise Improvement
REDUCTION IN TRANSMITTED
THICKNESS ROLL SIZE DIAMETER OF ROLL IMPACT NOISE
1 m x 15 m 0.20 m
5mm 21 dBA
2 m x 50 m 0.60 m
TECHNICAL DATA
IMPACTODAN 5 IMPACTODAN 10
TECHNICAL DATA VALUE UNIT STANDARD TECHNICAL DATA VALUE UNIT STANDARD
Length and WidthTolerance <1 % EN8722 Length and WidthTolerance <1 % EN8722
Reduction of Transmitted Impact Noise,Ln 20 dB EN140-8 EN717-2 Reduction of Transmitted Impact Noise,Ln 27 dB EN140-8 EN717-2
Impact SoundPressure Level L´nTw, on Site <60 dB EN140-7 EN717-2 Impact SoundPressure Level L´nTw, on Site <58 dB EN140-7 EN717-2
Hysteresis Load > 1.6 Nm EN3386-1 Hysteresis Load > 2.1 Nm EN3386-1
Compression Strength to 25% > 23± 2 Kpa UNEENISO3386-1 Compression Strength to 25% > 23± 2 Kpa UNEENISO3386-1
Compression Set 24 h, 50%comp., 23ºC < 32 % EN1856 Compression Set 24 h, 50%comp., 23ºC < 30 % EN1856
Tensile Strength > 180 Kpa EN1798 Tensile Strength > 130 Kpa EN1798
Water Diffusion Factor µ > 2000 - EN12086 Water Diffusion Factor µ > 2000 - EN12086
INSTALLATION PROCEDURE
1. Extend the sheet from end to end of the room. 2. Seal sheet joinings with CEALING TAPE
All Corners and Projections should be covered up with IMPACTODAN upto certain vertical height in order Isolate Contact of Hard Floor Covering Surface with any Hard Vertical
Surface (Walls, Fixtures, Pipes Installations etc.)
ACOUSTIC INSULATION CONFORDAN
CONFORDAN
CONFORDAN is ResilientFlat Sheet based on Chemically Cross-Linked Closed Cell Polyethylene Membrane
Finished Top with Aluminised LDPE Film. Acoustically it works as Sound Insulating Layer underLaminated Floors
Uses:
Used as Thermo-Acoustic Insulating Layer
Used as Anti-Dampness Vapour Barrier underLaminated Flooring
Used as Separation Underlay for Laminate Flooring
Advantages:
Economical Installation, Easy andEffective
HighAcoustic Efficiency with Little Thickness
DurableRetention of Acoustic Properties and Efficiency even Under Continuous Load
and Fatigue Stresses
Excellent Flexibility
Good Resistance to Tearing
CONFORDAN® ECO
HighResistance to Moisture and Vapour Diffusion
AluminiumFinish reduces build-up of Static Electricity
The AluminiumJoint Sealing Tape Dissipates Static Electrical Charges and Prevents
ChargeBuilt Up between Insulation and FlooringSubstrate
Impact NoiseImprovement > 18 dBA
Lightweight
Provides Acoustic as well as Thermal Comfort (Insulation)
Ideal for Both NewFloors and Refurbished Floors
TECHNICAL DATA
Thickness 3 mm EN1923
TRADE MARK ROLL SIZE DIAMETER OF ROLLS REDUCTION IN TRANSMITTED IMPACT NOISE
25m x 0.95m
CONFORDAN 0.20m 18 dB
15m x 0.95m
ACOUSTIC INSULATION FONODAN 50
FONODAN 50
FONODAN50 is a Multi-Layer Self-Adhesive Tape made of a Chemically Cross Linked Polyethylene Thermally Bonded
to HighDensity Elastomeric Membrane.Acoustically it works as Acoustic Buffer for the RigidConnectionbetween
Plasterboard and Steel Profile Minimisingthe Resonance.
Uses:
Used to Reduce Impact Noisein Half Pallets
Used to Provide Moisture and Vapour Barrier Properties to Steel Profiles
Used as Waterproofing and Expansion Band
Used for ImprovingLaminar Structure Plaster Acoustically.
Used to Provide NoiseDampeningto Metallic Structures in Tile Roofs
Advantages:
Economical Installation, Easy andEffective.
HighAcoustic Efficiency with Little Thickness
Excellent Flexibility
GoodResistance to Tearing.
HighResistance to Moisture and Vapour Diffusion
Self Adhesive Configurationmakes Application Easier and User Friendly Saving Cost of Application
Pre-Fabricated ConfigurationReduces Material Wastage during Applicationmaking it Cost Effective
Dampens and Minimises Plate Hollow Sound
Provides EnhancedInsulation to Traditional Plaster Board Systems by DampeningVibrationsat Junction between
Two Rigid Elements (Plate/Profile)
TECHNICAL DATA
Thickness 4 mm EN1923
> 10 C -
0
WorkTemperature
INSTALLATION PROCEDURE
DANOFON ®
FONODAN ® 50
'
Tll<ID/\N Building together
• Waterproofing
• Thermal Insulation
• Acoustic Insulation
• Flooring
• Landscape and Protection
�CSIC