Professional Documents
Culture Documents
231EE21 - ECA Tips for Preparaing Exam - Impartant Questions.doc
231EE21 - ECA Tips for Preparaing Exam - Impartant Questions.doc
ENGINEERING COLLEGE
(An Autonomous Institution, Affiliated to Anna University, Chennai)
Approved by AICTE, New Delhi & Accredited by National Board of Accreditation (NBA)
Accredited by NAAC, Recognized under 12(B) of the UGC Act, 1956.
Sevalpatti (P.O), Sivakasi - 626140. Tamilnadu.
Unit II
1. Identify the current in the 2Ω resistor between A and B for the network using
superposition theorem.
2. Determine the power delivered to the 15Ω resistance using Norton’s theorem shown
in Fig.
3. Identify the current in the 2Ω resistor between A and B for the network using
superposition theorem
4. For the circuit shown in Fig, find the Thevenin;s equivalent circuit and find the value
of (i) RL for maximum power transfer and (ii) the maximum power transferred to RL
using maximum power transfer theorem.
5. For the circuit shown, find the Norton’s equivalent circuit and find the value of (i) RL
for maximum power transfer and (ii) the maximum power transferred to RL using
maximum power transfer theorem.
Unit III
1. In RLC series circuit, the applied voltage is 15V. Drops across the resistance and
capacitance are 7V and 5V respectively. Calculate the voltage across the inductor.
Draw the phasor diagram.
2. A Seres RLC Circuit has R = 4.2Ω, L=0.03H, C = 450µF. If the circuit current I =
10A, find the voltage drop across each element, supply voltage and power factor.
Also draw the phasor diagram. Assume the supply frequency is 50Hz.
3. Show that 𝛚r2=𝛚1. 𝛚2 for the series resonant circuit.
4. With necessary diagrams, Relate the expressions for mutual inductance in a single
tuned circuit.
5. Two Coils connected in series have an equivalent inductance of 0.6H when
connected in aiding and 0.4H if connected in opposing. Calculate the mutual
inductance of the coil.
Unit IV
1. A Series RLC circuit having R = 10Ω, L = 0.2H and C = 20µF and constant
voltage of 200V is impressed upon the circuit at t=0. Determine the expression for the
transient current assuming initially relaxed conditions
2.
3. A 20µF capacitor is connected in series with a 50kΩ resistor and the circuit is
connected to a 20V DC Supply. Solve the time constant of the circuit.
4. In the RL circuit, the switch is closed t = 0. Find the current i(t), and the voltage across
resistance and inductance.
Unit V
1. Two wattmeter’s are connected to measure the input power to a balanced 3 phase load
by the two wattmeter method. If the instrument readings are 5kW and 4kW, determine
the total power input.
2. Explain the two wattmeter method pf measuring three phase power with neat circuit
connections
3. A Seres RLC Circuit has R = 4.2Ω, L=0.03H, C = 450µF. If the circuit current I = 10A,
find the voltage drop across each element, supply voltage and power factor. Also draw
the phasor diagram. Assume the supply frequency is 50Hz.
4. A three phase balanced delta connected load of (4+j8) Ω connected across a 400V, three
phase balanced supply. Determine the phase currents and line currents. The phase
sequence is RYB. Also calculate the power drawn by the load, draw the phasor
diagram.