Professional Documents
Culture Documents
List of International Organization for Standardization Iso Standards
List of International Organization for Standardization Iso Standards
List of International Organization for Standardization Iso Standards
The standards are protected by copyright and most of them must be purchased. However about 300 of the standards
produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]
Contents
1 ISO 1 – ISO 99
2 ISO 100 – ISO 199
3 ISO 200 – ISO 999
4 ISO 1000 – ISO 4999
5 ISO 5000 – ISO 8999
6 ISO 9000 – ISO 9999
7 ISO 10000 – ISO 10999
8 ISO 11000 – ISO 11999
9 ISO 12000 – ISO 12999
10 ISO 13000 – ISO 13999
11 ISO 14000 – ISO 14999
12 ISO 15000 – ISO 15999
13 ISO 16000 – ISO 16999
14 ISO 17000 – ISO 17999
15 ISO 18000 – ISO 18999
16 ISO 19000 – ISO 19999
17 ISO 20000 – ISO 20999
18 ISO 21000 – ISO 21999
19 ISO 22000 – ISO 22999
20 ISO 23000 – ISO 23999
21 ISO 24000 – ISO 24999
22 ISO 25000 – ISO 25999
23 ISO 26000 – ISO 26999
24 ISO 27000 – ISO 27999
25 ISO 28000 – ISO 28999
26 ISO 29000 – ISO 29999
27 ISO 30000 – ISO 39999
28 ISO 40000 – ISO 49999
29 ISO 50000 - ISO 59999
30 ISO 60000 - ISO 69999
31 ISO 80000 - ISO 89999
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 1/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 1 – ISO 99
ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of
geometrical and dimensional properties
ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
ISO 3:1973 Preferred numbers – Series of preferred numbers
ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
ISO 5 Photography and graphic technology – Density measurements
ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of
ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 8:1977 Documentation – Presentation of periodicals
ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic
and non-Slavic languages
ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace – Pipelines – Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and
verification
ISO 15:2017 Rolling bearings – Radial bearings – Boundary dimensions, general plan
ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation – Contents list of periodicals
ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications
ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications
ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—
Specifications
ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications
ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front
projection—Specifications [Withdrawn without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
ISO 34 Rubber, vulcanized or thermoplastic—Determination of tear strength
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 2/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
ISO 60:1977 Plastics—Determination of apparent density of material that can be poured from a specified funnel
ISO 61:1976 Plastics—Determination of apparent density of moulding material that cannot be poured from a
specified funnel
ISO 62:2008 Plastics—Determination of water absorption
ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
ISO 68 ISO general-purpose screw threads – Basic profile
ISO 91-1:1992 Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
ISO 91-2:1991 Part 2: Tables based on a reference temperature of 20 degrees C
ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum
measurement tables) and standard reference conditions
ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right)
ISO 93 Textile machinery and accessories—Cylindrical sliver cans
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 3/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 4/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 5/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence
of electrolytes
ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides
ISO 109:1982 Textile machinery—Working widths of weaving machines
ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone
9 degrees 15' [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone
4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone
3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium
compounds—Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical
properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
ISO 123:2001 Rubber latex—Sampling
ISO 124:2014 Latex, rubber—Determination of total solids content
ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content
ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number
ISO 128 Technical product documentation (TPD)—General principles of presentation[Note 3]
ISO 129 Technical product documentation (TPD)—Indication of dimensions and tolerances[Note 3]
ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by
ISO 12999-1:2014]
ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn:
replaced by ISO 16283-1:2014]
ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
[Withdrawn: replaced by ISO 16283-1:2014]
ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO
16283-1:2014]
ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-
1:2014]
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 6/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without
replacement]
ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV
100 [Withdrawn replaced with ISO 6507-2]
ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV
0,2 [Withdrawn replaced with ISO 6507-2]
ISO 148 Metallic materials—Charpy pendulum impact test
ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled
axes
ISO 230-3:2007 Part 3: Determination of thermal effects
ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal
displacement tests)
ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
ISO/TR 230-8:2010 Part 8: Vibrations
ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series
ISO 230, basic equations
ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically
controlled machine tools
ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters[Note 3]
ISO 234 Files and rasps
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 8/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 294-2:1996 Part 2: Small tensile bars
ISO 294-3:2002 Part 3: Small plates
ISO 294-4:2001 Part 4: Determination of moulding shrinkage
ISO 294-5:2011 Part 5: Preparation of standard specimens for investigating anisotropy
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 296:1991 Machine tools - Self-holding tapers for tool shanks
ISO 297:1988 7/24 tapers for tool shanks for manual changing
ISO 298:1973 Machine tools - Lathe centres - Sizes for interchangeability
ISO 299:1987 Machine tool tables - T-slots and corresponding bolts
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 9/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
ISO 428:1983 Wrought copper-aluminium alloys - Chemical composition and forms of wrought products
[Withdrawn without replacement]
ISO 445:2013 Pallets for materials handling – Vocabulary
ISO 472:2013 Plastics – Vocabulary
ISO 476:1982 Textile machinery and accessories – Pirn winding machines – Vocabulary
ISO 477:1982 Textile machinery and accessories – Cone and cheese winding machines – Vocabulary
ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of
preferred numbers
ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps
and electronic photoflash units – Specification
ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
ISO 536:2012 Paper and board – Determination of grammage
ISO 561:1989 Coal preparation plant - Graphical symbols
ISO/TR 581:2005 Weldability - Metallic materials - General principles
ISO 611:2003 Road vehicles – Braking of automotive vehicles and their trailers – Vocabulary
ISO 612:1978 Road vehicles – Dimensions of motor vehicles and towed vehicles – Terms and definitions
ISO 633:2007 Cork – Vocabulary
ISO 639 Codes for the representation of names of languages
ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
ISO 860:2007 Terminology work – Harmonization of concepts and terms
ISO 862:1984 Surface active agents – Vocabulary
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
ISO 928 Spices and condiments - Determination of total ash
ISO 936 Meat and meat products - Determination of total ash
ISO 962:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8-bit
extensions on 9- track 12,7 mm (0.5 in) magnetic tape
ISO 965 ISO general purpose metric screw threads – Tolerances
ISO 999:1996 Information and documentation – Guidelines for the content, organization, and presentation of
indexes
ISO 1073-1:1976 Part 1: Character set OCR-A - Shapes and dimensions of the printed image
ISO 1073-2:1976 Part 2: Character set OCR-B - Shapes and dimensions of the printed image
ISO 1081:2013 Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary
ISO 1086:1991 Information and documentation – Title leaves of books
ISO 1087 Terminology work - Vocabulary
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 11/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
ISO 1219-2:2012 Part 2: Circuit diagrams
ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
ISO 1222 Photography – Tripod connections
ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product
documentation
ISO 1382:2012 Rubber – Vocabulary
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 1413:2016 Horology - Shock-resistant wrist watches
ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature
ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
ISO 1538:1984 Programming languages - ALGOL 60
ISO/IEC 1539 Information technology – Programming languages – Fortran
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 12/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
ISO 2033:1983 Information processing - Coding of machine readable characters (MICR and OCR)
ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
ISO 2047:1975 Information processing - Graphical representations for the control characters of the 7- bit coded
character set
ISO 2074:2007 Plywood – Vocabulary
ISO 2076:2013 Textiles – Man-made fibres – Generic names
ISO 2080:2008 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings -
Vocabulary
ISO 2108:2005 Information and documentation – International standard book number (ISBN)
ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and
contact number assignments
ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
ISO 2146:2010 Information and documentation - Registry services for libraries and related organizations
ISO 2148:1974 Continuous handling equipment – Nomenclature
ISO 2162 Technical product documentation – Springs
ISO 2692:2014 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material
requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 2709:2008 Information and documentation – Format for information exchange
ISO 2710 Reciprocating internal combustion engines - Vocabulary
ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time
paper or plastic printing ribbons and marking to indicate the end of the ribbons
ISO 2784:1974 Continuous forms used for information processing - Sizes and sprocket feed holes
ISO 2788:1986 Documentation - Guidelines for the establishment and development of monolingual thesauri
[Withdrawn: replaced by ISO 25964-1:2011]
ISO 2789:2013 Information and documentation - International library statistics
ISO 2806:1994 Industrial automation systems - Numerical control of machines - Vocabulary
ISO 2822 Raw cattle hides and calf skins
ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859-2:1985 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
ISO 2859-4:2002 Part 4: Procedures for assessment of declared quality levels
ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for
lot-by-lot inspection
ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by
attributes
ISO 2923:1996 Acoustics - Measurement of noise on board vessels
ISO 2972:1979 Numerical control of machines - Symbols
ISO 3002 Basic quantities in cutting and grinding
ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool
and working angles, chip breakers
ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate
tool and working angles
ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
ISO 3002-4:1984 Part 4: Forces, energy, power
ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
ISO 3029:1995 Photography - 126-size cartridges - Dimensions of cartridge, film and backing paper [Withdrawn
without replacement]
ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
ISO 3082 Iron ores – Sampling and sample preparation procedures
ISO 3098 Technical product documentation – Lettering
ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
ISO 3534-2:2006 Part 2: Applied statistics
ISO 3534-3:2013 Part 3: Design of experiments
ISO 3534-4:2014 Part 4: Survey sampling
ISO 3535:1977 Forms design sheet and layout chart
ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format
ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical
and magnetic characteristics
ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track
format
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 16/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic
characteristics
ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
ISO 3591 Sensory analysis – Apparatus – Wine-tasting glass
ISO 3593 Starch — Determination of ash
ISO 3601 Fluid power systems – O-rings
ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
ISO 3833:1977 Road vehicles – Types – Terms and definitions
ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 17/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 3880-1:1977
ISO 3883:1977 Office machines – Line and character capacity of address masters
ISO 3901:2001 Information and documentation – International Standard Recording Code (ISRC)
ISO 3911:2004 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
ISO 3918:2007 Milking machine installations – Vocabulary
ISO 3950:2016 Dentistry - Designation system for teeth and areas of the oral cavity
ISO 3951 Sampling procedures for inspection by variables
ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for
lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit
(AQL) for lot-by-lot inspection of independent quality characteristics
ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot
inspection
ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection
by variables (known standard deviation)
ISO 3952 Kinematic diagrams - Graphical symbols
ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their
components; Linkage of bars and their links)
ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
ISO 3977 Gas turbines – Procurement
ISO 4006:1991 Measurement of fluid flow in closed conduits - Vocabulary and symbols
ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary
ISO 4031:1978 Information interchange - Representation of local time differentials [Withdrawn: replaced by ISO
8601:1988]
ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining
their response as a function of photon energy
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 18/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 4074 Natural latex rubber condoms – Requirements and test methods
ISO 4087:2005 Micrographics - Microfilming of newspapers for archival purposes on 35 mm microfilm
ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
ISO 4135:2001 Anaesthetic and respiratory equipment - Vocabulary
ISO 4139:1979 Ferrosilicon - Determination of aluminium content - Flame atomic absorption spectrometric
method
ISO 4140:1979 Ferrochromium and ferrosilicochromium - Determination of chromium content - Potentiometric
method
ISO 4157 Construction drawings – Designation systems
ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium - Determination of silicon content -
Gravimetric method
ISO 4159:1978 Ferromanganese and ferrosilicomanganese - Determination of manganese content -
Potentiometric method
ISO 4165 Road vehicles — Electrical connections — Double-pole connection
ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated
structures
ISO 4173:1980 Ferromolybdenum - Determination of molybdenum content - Gravimetric method
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
ISO 4217:2015 Codes for the representation of currencies
ISO 4223 Definitions of some terms used in the tyre industry
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 19/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 4552 Ferroalloys - Sampling and sample preparation for chemical analysis
ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography
ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
ISO 5445:1980 Ferrosilicon - Specification and conditions of delivery
ISO 5446:2017 Ferromanganese - Specification and conditions of delivery
ISO 5447:1980 Ferrosilicomanganese - Specification and conditions of delivery
ISO 5448:1981 Ferrochromium - Specification and conditions of delivery
ISO 5449:1980 Ferrosilicochromium - Specification and conditions of delivery
ISO 5450:1980 Ferrotungsten - Specification and conditions of delivery
ISO 5451:1980 Ferrovanadium - Specification and conditions of delivery
ISO 5452:1980 Ferromolybdenum - Specification and conditions of delivery
ISO 5453:1980 Ferroniobium - Specification and conditions of delivery
ISO 5454:1980 Ferrotitanium - Specification and conditions of delivery
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 21/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no
replacement]
ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 22/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 5807:1985 Information processing - Documentation symbols and conventions for data, program and system
flowcharts, program network charts and system resources charts
ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all
transformers
ISO 5843 Aerospace - List of equivalent terms[Note 3]
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 23/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 24/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
ISO 6887-5:2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial
suspension and decimal dilutions for microbiological examination - Part 5: Specific rules for the preparation of
milk and milk products
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 25/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 6887-6:2013 Microbiology of food and animal feed - Preparation of test samples, initial suspension and
decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken
at the primary production stage
ISO 6892 Metallic materials – Tensile testing
ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically
powered wheelchairs and scooters, and battery chargers
ISO 7176-26:2007 Part 26: Vocabulary
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 26/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
ISO 7524:1985 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption
method after induction furnace combustion
ISO 7526:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method
after induction furnace combustion
ISO 7527:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method
after induction furnace combustion
ISO 7563:1998 Fresh fruits and vegetables – Vocabulary
ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side
dressing – Nomenclature and acceptance conditions
ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature
and acceptance conditions
ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and
acceptance conditions
ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing –
Nomenclature and acceptance conditions
ISO 7573:2008 Technical product documentation – Parts lists
ISO 7583:2013 Anodizing of aluminium and its alloys - Terms and definitions
ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling
ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 28/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per
track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System
(GKS)
ISO 7944:1998 Optics and optical instruments - Reference wavelengths
ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance
conditions
ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions
ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and
acceptance conditions
ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions
ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions
ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance
conditions
ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions
ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of
solid woods and panels – Nomenclature and acceptance conditions
ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and
acceptance conditions
ISO 7967 Reciprocating internal combustion engines - Vocabulary of components and systems
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 29/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the
connection-mode transport service
ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
ISO 8090:1990 Cycles – Terminology
ISO 8107:1993 Nuclear power plants - Maintainability - Terminology
ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of
equivalent terms
ISO 8116 Textile machinery and accessories – Beams for winding
ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel
substrates after overall removal of previous coatings
ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of
previous coatings
ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with
high-pressure water jetting
ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the
assessment of surface cleanliness
ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
of abrasive blast-cleaned surfaces
ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -
Comparator procedure
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 31/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the
determination of surface profile - Focusing microscope procedure
ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the
determination of surface profile - Stylus instrument procedure
ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation
methods
ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
ISO 8549-3:1989 Part 3: Terms relating to external orthoses
ISO 8549-4:2014 Part 4: Terms relating to limb amputation
ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete
items in lots
ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation
protocol
ISO/IEC 8825-1:2015 Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER)
ISO/IEC 8825-2:2015 Specification of Packed Encoding Rules (PER)
ISO/IEC 8825-3:2015 Specification of Encoding Control Notation (ECN)
ISO/IEC 8825-4:2015 XML Encoding Rules (XER)
ISO/IEC 8825-5:2015 Mapping W3C XML schema definitions into ASN.1
ISO/IEC 8825-6:2015 Registration and application of PER encoding instructions
ISO/IEC 8825-7:2015 Part 7: Specification of Octet Encoding Rules (OER)
ISO 8826 Technical drawings – Rolling bearings
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 35/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level
protocol in local area networks
ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25
DTE conformance testing
ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy
transmittance, ultraviolet transmittance and related glazing factors
ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 3]
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 37/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of
standard specimens for the evaluation of corrosivity
ISO 9227:2017 Corrosion tests in artificial atmospheres -- Salt spray tests
ISO 9229:2007 Thermal insulation - Vocabulary
ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media
purchased by libraries
ISO 9235:2013 Aromatic natural raw materials – Vocabulary
ISO 9241 Ergonomics of human-system interaction
ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information
interchange
ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and
equipment
ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications
equipment
ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 38/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common
Access Method (CAM) Transport and SCSI interface module
ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass
transfer – Vocabulary
ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
ISO 9488:1999 Solar energy - Vocabulary
ISO/IEC 9496:2003 CHILL - The ITU-T programming language
ISO 9506 Industrial automation systems - Manufacturing Message Specification
ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using
modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document
interchange
ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet
mode terminal equipment to an integrated services digital network (ISDN)
ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between
systems – OSI Routeing Framework
ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 39/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical
Interactive Graphics System (PHIGS)
ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics
System (PHIGS) language bindings[Note 3]
ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 40/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books,
newspapers, periodicals and electronic publications
ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application
level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 3]
ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by
ISO and ITU-T
ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
ISO/IEC 9834-6:2005 Registration of application processes and application entities
ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object
identifiers
ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based
identification
ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors –
Definitions and safety rules
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 41/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal
transmittance
ISO 9873:2017 Dentistry - Intra-oral mirrors
ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication
codes
ISO/IEC 9899:2011 Programming languages – C
ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base
Specifications, Issue 7
ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
ISO 9949 Urine absorbing aids - Vocabulary
ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 42/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions
ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
ISO/IEC 10089:1991 Information technology – 130 mm rewritable optical disk cartridge for information
interchange
ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data
interchange
ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once
recording format
ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems[Note 3]
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 43/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and
standards
ISO 10263 Earth-moving machinery – Operator enclosure environment
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 46/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic
information interchange
ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic
information interchange
ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21
bis to provide the OSI connection-mode Network Service
ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems
– Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in
conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
ISO 10628 Flow diagrams for process plants
ISO/IEC 10641:1993 Information technology - Computer graphics and image processing - Conformance testing of
implementations of graphics standards
ISO/IEC 10646:2014 Information technology – Universal Coded Character Set (UCS)
ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational
settings
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 47/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 48/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 49/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 11151-2:2015 Part 2: Components for the infrared spectral range
ISO 11156:2011 Packaging - Accessible design - General requirements
ISO/IEC 11160 Information technology - Office equipment - Minimum information to be included in specification
sheets - Printers
ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
ISO 11357-4:2005 Determination of specific heat capacity
ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction
and degree of conversion
ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction
temperature (dynamic OIT)
ISO 11357-7:2002 Determination of crystallization kinetics
ISO 11375:1998 Building construction machinery and equipment – Terms and definitions
ISO 11400:1992 Nickel, ferronickel and nickel alloys - Determination of phosphorus content -
Phosphovanadomolybdate molecular absorption spectrometric method
ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD)
ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of
software
ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
ISO 11442:2006 Technical product documentation – Document management
ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole
connectors for vehicles with 12 V nominal supply voltage
ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial
specifications
ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated
electromagnetic energy
ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control
Protocol Data Units (HIPPI-LE)
ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 51/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for
absorptance of optical laser components
ISO 11553 Safety of machinery – Laser processing machines
ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement
methods
ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy
concentration of its short-lived decay products
ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-
lived decay products
ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration
using passive sampling and delayed analysis
ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 53/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
ISO/TS 11669:2012 Translation projects - General guidance
ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam
positional stability
ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines
– Vocabulary and symbols
ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety
signs and hazard pictorials - General principles
ISO/IEC 11693 Identification cards – Optical memory cards
ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data
transmission
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 54/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area
Networks
ISO 11807 Integrated optics - Vocabulary
ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters -
Part 2: Simplified transcription of Thai language
ISO/TR 11941:1996 Information and documentation - Transliteration of Korean script into Latin characters
[Withdrawn, no replacement]
ISO/IEC 11976:2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many
ultra density optical (UDO) disk cartridges - Capacity: 60 Gbytes per cartridge - Second generation
ISO 11979 Ophthalmic implants - Intraocular lenses
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 55/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
ISO 11994:1997 Cranes – Availability – Vocabulary
ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation
ISO/TR 13028:2010 Information and documentation - Implementation guidelines for digitization of records
ISO 13053 Quantitative methods in process improvement - Six Sigma
ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze
ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 59/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 13163:2013 Water quality - Lead-210 - Test method using liquid scintillation counting
ISO 13164 Water quality - Radon-222
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 60/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout
ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data
exchange: Graphical product information
ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of
properties for drawing header and their XML-data exchange
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 61/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles
ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
ISO/TS 13399-150:2008 Part 150: Usage guidelines
ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts
ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts
ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming
ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to
ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to
ISO/TS 13399-3: Modelling of solid drills and countersinking tools
ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills
ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with
adjustable cartridges for boring
ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts
ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for
indexable inserts
ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers
ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing
adaptive items
ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets
ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the
write once, read multiple (WORM) type using the CCS method
ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
ISO/IEC 13421:1993 Information technology – Data Interchange on 12,7 mm, 48-track magnetic tape cartridges –
DLT 1 format
ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MByte
capacity using sector servo tracking – ISO Type 304
ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling
ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP)
ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis
ISO/IEC 13481:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1
gigabyte per cartridge
ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk
media for information interchange
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 62/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 63/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours
ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours
ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours
ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam
power (energy) density distribution
ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral
characteristics of lasers
ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components
ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular
reflectance and regular transmittance of optical laser components
ISO 13702 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore
production installations - Requirements and guidelines
ISO/IEC 13712 Information technology – Remote Operations
ISO/IEC 13817 Information technology - Programming languages, their environments and system software
interfaces - Vienna Development Method - Specification Language
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 65/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes
ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines
ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
ISO 14132-3:2014 Part 3: Terms for telescopic sights
ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
ISO 14132-5:2008 Part 5: Terms for night vision devices
ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Specification, functional model and information flows – Identification
supplementary services
ISO/IEC 14143 Information technology - Software measurement - Functional size measurement
ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI)
ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC)
ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ)
ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2)
ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW)
ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 66/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of
measuring equipment and in product verification
ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and
workpieces
ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting
the fibres
ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-
aminoazobenzene
ISO/IEC TR 14369:2014 Information technology - Programming languages, their environments and system
software interfaces - Guidelines for the preparation of Language-Independent Service Specifications (LISS)
ISO 14405-1 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes
ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and
other paper documents for archive and library use – Methods and materials
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 67/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming
to IEC 1016
ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity
assessment
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 68/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and
presentation of characteristics
ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for
electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO/IEC 14651:2016 Information technology - International string ordering and comparison - Method for
comparing character strings and description of the common template tailorable ordering
ISO/IEC 14662:2010 Information technology – Open-edi reference model
ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
ISO/IEC 14709-1:1997 Part 1: Integrated Services Digital Network (ISDN) basic access
ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 70/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk
cartridges using phase change - Capacity: 1,3 Gbytes per cartridge
ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic
Systems (HBES)
ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 71/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment
applications for fare media
ISO 14813 Intelligent transport systems – Reference model architecture(s) for the ITS sector
ISO 14813-1:2015 Part 1: ITS service domains, service groups and services
ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards
ISO 14813-6:2009 Part 6: Data presentation in ASN.1
ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification –
Reference architecture and terminology
ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System
specifications
ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification –
Numbering and data structure
ISO 14817 Intelligent transport systems – ITS central data dictionaries
ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel (RDS-TMC)
using ALERT-C
ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel
(RDS-TMC) using ALERT-C
ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel (RDS-
TMC) using ALERT-C
ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message
Channel ALERT C coding
ISO 14823:2017 Intelligent transport systems – Graphic data dictionary
ISO 14825:2011 Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0
ISO 14827 Transport information and control systems – Data interfaces between centres for transport information
and control systems
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 72/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 77/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication
supplementary service
ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization
ISO 15511:2011 Information and documentation - International standard identifier for libraries and related
organizations (ISIL)
ISO 15519 Specification for diagrams for process industry
ISO 15707:2001 Information and documentation – International Standard Musical Work Code (ISWC)
ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical
scan recording – HH-1 format
ISO/IEC 15731:1998 Information technology – 12,65 mm wide magnetic tape cassette for information interchange
– Helical scan recording – DTF-1 format
ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical
scan recording – DA-2 format
ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Specification, functional model and information flows – Common
information additional network feature
ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional
network feature
ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems
– Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional
network feature
ISO/IEC 15776:2001 VME64bus - Specification
ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge -- Helical scan recording – AIT-
1 format
ISO 15782 Certificate management for financial services[Note 3]
ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints
ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications
ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems –
Local and metropolitan area networks – Common specifications
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 79/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems
– Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer
services
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO/IEC 15909 Systems and software engineering - High-level Petri nets
ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-
solids anaerobic-digestion conditions – Method by analysis of released biogas
ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Specification, functional model and information flows – Call Priority
Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call
Priority Interruption Protection supplementary services
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 81/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
ISO 16232-10:2007 Part 10: Expression of results
ISO 16245:2009 Information and documentation - Boxes, file covers and other enclosures, made from cellulosic
materials, for storage of paper and parchment documents
ISO 16249:2013 Springs – Symbols
ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software
interfaces – ECMAScript language specification
ISO 16269 Statistical interpretation of data
ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of
stakeholder
ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of
Stakeholder
ISO 16355-5:2017 Part 5: Solution strategy
ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges
– DLT 6 format
ISO/IEC 16388:2007 Information technology - Automatic identification and data capture techniques - Code 39 bar
code symbology specification
ISO/IEC 16390:2007 Information technology - Automatic identification and data capture techniques - Interleaved 2
of 5 bar code symbology specification
ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2
ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group
applications
ISO/IEC 16513:2005 Information technology – Group management protocol
ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1
(PHRS FM)
ISO 16548:2012 Ships and marine technology - Ship design - General guidance on emergency towing
procedures
ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
ISO 16613 Graphic technology - Variable content replacement
ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
ISO 16638 Radiological protection - Monitoring and internal dosimetry for specific materials
ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture
and postural support surfaces
ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 84/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management
systems
ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event
sustainability management systems
ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset
management systems
ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business
continuity management systems
ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety
management systems
ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery
management systems
ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-
party audit report on management systems
ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management
system certification audits
ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 17049:2013 Accessible design - Application of braille on signage, equipment and appliances
ISO/IEC 17050:2004 Conformity assessment — Supplier's declaration of conformity
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 85/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 17258:2015 Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in
organisations
ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal
goods transport architecture and terminology
ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and
data structures
ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System
parameters
ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces
ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API)
ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service
and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode
connections with 16 kbit/s sub-multiplexing
ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode
connections with 8 kbit/s sub-multiplexing
ISO 17316:2015 Information and documentation - International standard link identifier (ISLI)
ISO 17338:2009 Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions
for ships and high-speed craft
ISO/IEC 17341:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW
format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
ISO/IEC 17342:2004 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side)
DVD re-recordable disk (DVD-RW)
ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems
– Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services
ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R
format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
ISO/IEC 17345:2006 Information technology - Data Interchange on 130 mm Rewritable and Write Once Read
Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation
ISO/IEC 17346:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3
Gbytes per cartridge
ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs)
ISO 17351:2013 Packaging - Braille on packaging for medicinal products
ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements
and test procedures
ISO 17363:2013 Supply chain applications of RFID - Freight containers
ISO 17364:2013 Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging
items (RPIs)
ISO 17365:2013 Supply chain applications of RFID - Transport units
ISO 17366:2013 Supply chain applications of RFID - Product packaging
ISO 17367:2013 Supply chain applications of RFID - Product tagging
ISO 17369:2013 Statistical data and metadata exchange (SDMX)
ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management
ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air
interface message set, contents and format
ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance
requirements and test procedures
ISO 17398:2004 Safety colours and safety signs - Classification, performance and durability of safety signs
ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems –
Short Distance Visible Light Communication (SDVLC)
ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS
applications in a global context
ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and
objectives for selection of communication profiles
ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic
Maps concepts
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 86/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-
vehicle presentation of external road and traffic related data
ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds
ISO/TS 17427 Intelligent transport systems – Cooperative ITS[Note 3]
ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for
cooperative systems
ISO/TR 17427-2:2015 Part 2: Framework overview
ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for 'core' systems
ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems
ISO/TR 17427-6:2015 Part 6: 'Core system' risk assessment methodology
ISO/TR 17427-7:2015 Part 7: Privacy aspects
ISO/TR 17427-8:2015 Part 8: Liability aspects
ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects
ISO/TR 17427-10:2015 Part 10: Driver distraction and information display
ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of
information between ITS stations
ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects
ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 87/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy
performance of buildings
ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and
techniques for hazard identification and risk assessment
ISO/IEC 17788:2014 Information technology - Cloud computing - Overview and vocabulary
ISO/IEC 17789:2014 Information technology - Cloud computing - Reference architecture
ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software
ISO 17799 Information technology - Security techniques - Code of Practice for Information Security Management
(superseded by ISO/IEC 27002)
ISO/IEC 17811 Information technology – Device control and management
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 88/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of
holograms
ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics
ISO 17907:2014 Ships and marine technology - Single point mooring arrangements for conventional tankers
ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information
interchange – Parallel serpentine format
ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing
ISO 17933:2000 GEDI - Generic Electronic Document Interchange
ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language
system
ISO 17937:2015 Dentistry - Osteotome
ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata
ISO/IEC 17960:2015 Information technology - Programming languages, their environments and system software
interfaces - Code signing for source code
ISO/IEC TS 17961:2013 Information technology - Programming languages, their environments and system
software interfaces - C secure coding rules
ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification
ISO 17972 Graphic technology - Colour data exchange format (CxF/X)[Note 3]
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 89/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems
– Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
ISO 17987 Road vehicles – Local Interconnect Network (LIN)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 90/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 18047-2:2012 Part 2: Test methods for air interface communications below 135 kHz
ISO/IEC TR 18047-3:2011 Part 3: Test methods for air interface communications at 13,56 MHz
ISO/IEC TR 18047-4:2004 Part 4: Test methods for air interface communications at 2,45 GHz
ISO/IEC 18047-6:2012 Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
ISO/IEC TR 18047-7:2010 Part 7: Test methods for active air interface communications at 433 MHz
ISO/IEC 18050:2006 Information technology - Office equipment - Print quality attributes for machine readable
Digital Postage Marks
ISO/IEC 18051:2012 Information technology – Telecommunications and information exchange between systems
– Services for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 18052:2012 Information technology – Telecommunications and information exchange between systems
– ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC TR 18053:2000 Information technology - Telecommunications and information exchange between
systems - Glossary of definitions and terminology for Computer Supported Telecommunications Applications
(CSTA) Phase III
ISO/IEC 18056:2012 Information technology – Telecommunications and information exchange between systems
– XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC TR 18057:2004 Information technology – Telecommunications and information exchange between
systems – Using ECMA-323 (CSTA XML) in a Voice Browser Environment
ISO/TS 18062:2016 Health informatics – Categorial structure for representation of herbal medicaments in
terminological systems
ISO 18064:2014 Thermoplastic elastomers – Nomenclature and abbreviated terms
ISO 18065:2015 Tourism and related services – Tourist services for public use provided by Natural Protected
Areas Authorities – Requirements
ISO/IEC 18092:2013 Information technology – Telecommunications and information exchange between systems
– Near Field Communication – Interface and Protocol (NFCIP-1)
ISO/IEC 18093:1999 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM
(Write Once Read Many) using irreversible effects - Capacity: 5,2 Gbytes per cartridge
ISO 18104:2014 Health informatics – Categorial structures for representation of nursing diagnoses and nursing
actions in terminological systems
ISO/TS 18110:2015 Nanotechnologies - Vocabularies for science, technology and innovation indicators
ISO 18115 Surface chemical analysis – Vocabulary
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 91/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-
system issues
ISO 18158:2016 Workplace air - Terminology
ISO/TS 18173:2005 Non-destructive testing - General terms and definitions
ISO/IEC 18180:2013 Information technology - Specification for the Extensible Configuration Checklist Description
Format (XCCDF) Version 1.2
ISO 18185 Freight containers – Electronic seals
ISO 18215:2015 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
ISO 18232:2006 Health Informatics – Messages and communication – Format of length limited globally unique
string identifiers
ISO/TS 18234 Intelligent transport systems – Traffic and travel information via transport protocol experts group,
generation 1 (TPEG1) binary data format
ISO 18369-1:2017 Part 1: Vocabulary, classification system and recommendations for labelling specifications
ISO/IEC 18370 Information technology - Security techniques - Blind digital signatures
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 92/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 18388:2016 Technical product documentation (TPD) – Relief grooves – Types and dimensioning
ISO 18391:2016 Geometrical product specifications (GPS) - Population specification
ISO/TR 18401:2017 Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004
series
ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel
and their organizations in relation to Six Sigma and Lean implementation
ISO 18405:2017 Underwater acoustics - Terminology
ISO 18406:2017
ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit
principle for controlling outgoing quality
ISO/IEC 18450:2013 Information technology - Telecommunications and information exchange between systems -
Web Services Description Language (WSDL) for CSTA Phase III
ISO 18451 Pigments, dyestuffs and extenders – Terminology
ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
ISO/IEC 18477-3:2015 Part 3: Box file format
ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
ISO 18495 Intelligent transport systems – Commercial freight – Automotive visibility in the distribution supply
chain
ISO 18601:2013 Packaging and the environment - General requirements for the use of ISO standards in the field
of packaging and the environment
ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
ISO 18603:2013 Packaging and the environment—Reuse
ISO 18604:2013 Packaging and the environment—Material recycling
ISO 18605:2013 Packaging and the environment—Energy recovery
ISO 18606:2013 Packaging and the environment—Organic recycling
ISO/TS 18614:2016 Packaging - Label material - Required information for ordering and specifying self-adhesive
labels
ISO 18619:2015 Image technology colour management - Black point compensation
ISO 18626:2014 Information and documentation - Interlibrary Loan Transactions
ISO 18629 Industrial automation systems and integration – Process specification language
ISO/TR 18638:2017 Health informatics – Guidance on health information privacy education in healthcare
organizations
ISO 18650 Building construction machinery and equipment – Concrete mixers
ISO/IEC 18745-1:2014 Part 1: Physical test methods for passport books (durability)
ISO/IEC 18745-2:2016 Part 2: Test methods for the contactless interface
ISO/TS 18750:2015 Intelligent transport systems – Cooperative systems – Definition of a global concept for Local
Dynamic Maps
ISO 18774:2015 Securities and related financial instruments – Financial Instrument Short Name (FISN)
ISO 18775:2008 Veneers – Terms and definitions, determination of physical characteristics and tolerances
ISO 18788:2015 Management system for private security operations – Requirements with guidance for use
ISO/TS 18790 Health informatics – Profiling framework and classification for Traditional Medicine informatics
standards development
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 94/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 95/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 19263-1:2017 Part 1: Best practices for digital image capture of cultural heritage material
ISO/TS 19264 Photography - Archiving systems - Image quality analysis
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 97/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 19403-2:2017 Part 2: Determination of the surface free energy of solid surfaces by measuring the contact
angle
ISO 19403-3:2017 Part 3: Determination of the surface tension of liquids using the pendant drop method
ISO 19403-4:2017 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids
from an interfacial tension
ISO 19403-5:2017 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids
from contact angles measurements on a solid with only a disperse contribution to its surface energy
ISO 19403-6:2017 Part 6: Measurement of dynamic contact angle
ISO 19403-7:2017 Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
ISO/TS 19408:2015 Footwear – Sizing – Vocabulary and terminology
ISO 19439 Enterprise integration – Framework for enterprise modelling
ISO 19440 Enterprise integration – Constructs for enterprise modelling
ISO 19444 Document management - XML Forms Data Format
ISO/IEC TR 19566-1:2016 Part 1: Packaging of information using codestreams and file formats
ISO/IEC TR 19566-2:2016 Part 2: Transport mechanisms and packaging
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 98/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 99/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC TR 19768:2007 Information technology - Programming languages - Technical Report on C++ Library
Extensions
ISO/IEC 19770 Information technology – Software asset management
ISO/IEC 19772:2009 Information technology - Security techniques - Authenticated encryption
ISO/IEC 19773:2011 Information technology - Metadata Registries (MDR) modules
ISO/IEC 19774:2006 Information technology - Computer graphics and image processing - Humanoid Animation
(H-Anim)
ISO/IEC 19775 Information technology—Computer graphics, image processing and environmental data
representation—Extensible 3D (X3D)
ISO 19891-1:2017 Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
ISO 19952:2005 Footwear – Vocabulary
ISO/IEC 19987:2015 Information technology - EPC Information services - Specification
ISO/IEC 19988:2015 Information technology - GS1 Core Business Vocabulary (CBV)
ISO 19993 Timber structures—Glued laminated timber—Face and edge joint cleavage test
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 101/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 20016-1:2014 Part 1: Framework and reference model for semantic interoperability
ISO/IEC TR 20017:2011 Information technology - Radio frequency identification for item management -
Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and
implantable cardioverter defibrillators
ISO 20022 Financial services – UNIversal Financial Industry message scheme
ISO/TS 20026:2017 Intelligent transport systems – Cooperative ITS – Test architecture
ISO/IEC TS 20027:2015 Biometrics interoperability profiles – Best practices for slap tenprint captures
ISO/IEC 20060:2010 Information technology – Open Terminal Architecture (OTA) – Virtual machine
ISO/IEC 20061:2001 Information technology – 12,65 mm wide magnetic tape cassette for information interchange
– Helical scan recording – DTF-2
ISO/IEC 20062:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange –
Helical scan recording – VXA-1 format
ISO/IEC TS 20071 Information technology – User interface component accessibility
ISO/IEC TS 20071-11:2012 Part 11: Guidance for alternative text for images
ISO/IEC TS 20071-21:2015 Part 21: Guidance on audio descriptions
ISO/IEC TS 20071-25:2017 Part 25: Guidance on the audio presentation of text in videos, including captions,
subtitles and other on-screen text
ISO 20072 Aerosol drug delivery device design verification—Requirements and test methods
ISO/IEC 20113:2004 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network – Specification, functional model and information flows – Make call request
supplementary service
ISO/IEC 20114:2004 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network (PISN) – Inter-exchange signalling protocol – Make call request
supplementary service
ISO/IEC 20115:2004 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network – Use of QSIG for Message Centre Access (MCA) profile standard
ISO/IEC 20116:2004 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network – Specification, functional model and information flows – Message centre
monitoring and mailbox identification supplementary services
ISO/IEC 20117:2004 Information technology – Telecommunications and information exchange between systems –
Private Integrated Services Network – Inter-exchange signalling protocol – Message centre monitoring and
mailbox identification supplementary services
ISO 20121:2012 Event sustainability management systems - Requirements with guidance for use
ISO 20155:2017 Ships and marine technology - Test method of flow induced in-pipe noise source characteristics
for a ship-used pump
ISO/IEC 20161:2001 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Use of QSIG at the C reference point between a PINX and an
Interconnecting Network
ISO/IEC 20162:2001 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM
(Write Once Read Many) using irreversible effects - Capacity: 30 Gbytes per cartridge
ISO/IEC 20243:2015 Information Technology - Open Trusted Technology ProviderTM Standard (O-TTPS) -
Mitigating maliciously tainted and counterfeit products
ISO/TS 20245:2014 Cross-border trade of second-hand goods
ISO/IEC 20246:2017 Software and systems engineering - Work product reviews
ISO 20252:2012 Market, opinion and social research — Vocabulary and service requirements
ISO 20275:2017 Financial services – Entity legal forms (ELF)
ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
ISO/TS 20282 Usability of consumer products and products for public use
ISO 20283 Mechanical vibration - Measurement of vibration on ships
ISO 20283-4:2012 Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
ISO 20301:2014 Health informatics – Health cards – General characteristics
ISO 20302:2014 Health informatics – Health cards – Numbering system and registration procedure for issuer
identifiers
ISO 20381:2009 Mobile elevating work platforms - Symbols for operator controls and other displays
ISO 20400:2017 Sustainable procurement - Guidance
ISO/TS 20428:2017 Health informatics – Data elements and their metadata for describing structured clinical
genomic sequence information in electronic health records
ISO/TS 20440:2016 Health informatics – Identification of medicinal products – Implementation guide for ISO
11239 data elements and structures for the unique identification and exchange of regulated information on
pharmaceutical dose forms, units of presentation, routes of administration and packaging
ISO/TS 20452:2007 Requirements and Logical Data Model for a Physical Storage Format (PSF) and an
Application Program Interface (API) and Logical Data Organization for PSF used in Intelligent Transport Systems
(ITS) Database Technology
ISO/TS 20477:2017 Nanotechnologies - Standard terms and their definition for cellulose nanomaterial
ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
ISO/TR 20514:2005 Health informatics – Electronic health record – Definition, scope and context
ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels
ISO/TR 20526:2017 Account-based ticketing state of the art report
ISO/TR 20529 Intelligent transport systems – Framework for green ITS (G-ITS) standards
ISO 20712-1:2008 Part 1: Specifications for water safety signs used in workplaces and public areas
ISO 20712-2:2007 Part 2: Specifications for beach safety flags - Colour, shape, meaning and performance
ISO 20712-3:2014 Part 3: Guidance for use
ISO 20725:2004 Textile machinery – Condensers for cotton spinning – Vocabulary and principles of construction
ISO 20726:2004 Textile machinery – Hopper feeders for cotton spinning – Vocabulary and principles of
construction
ISO 20727:2004 Textile machinery – Mixing bale openers for cotton spinning – Vocabulary and principles of
construction
ISO/IEC 20741:2017 Systems and software engineering - Guideline for the evaluation and selection of software
engineering tools
ISO/IEC TR 20748 Information technology for learning, education and training - Learning analytics interoperability
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 103/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/TR 20811:2017 Optics and photonics – Lasers and laser-related equipment – Laser-induced molecular
contamination testing
ISO 20815 Petroleum, petrochemical and natural gas industries - Production assurance and reliability
management
ISO 20816 Mechanical vibration – Measurement and evaluation of machine vibration
ISO 20816-2:2017 Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with
fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO/TR 20831:2017 Health informatics – Medication management concepts and definitions
ISO/IEC TR 20913:2016 Information technology - Data centres - Guidelines on holistic investigation methodology
for data centre key performance indicators
ISO/IEC 20919:2016 Information technology – Linear Tape File System (LTFS) Format Specification
ISO/IEC 20922:2016 Information technology – Message Queuing Telemetry Transport (MQTT) v3.1.1
ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size
measurement method 2009
ISO/IEC 20933:2016 Information technology - Distributed Application Platforms and Services (DAPS) - Access
Systems
ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
ISO/IEC 20944-1:2013 Part 1: Framework, common vocabulary, and common provisions for conformance
ISO/IEC 20944-2:2013 Part 2: Coding bindings
ISO/IEC 20944-3:2013 Part 3: API bindings
ISO/IEC 20944-4:2013 Part 4: Protocol bindings
ISO/IEC 20944-5:2013 Part 5: Profiles
ISO 20958:2013 Condition monitoring and diagnostics of machine systems – Electrical signature analysis of
three-phase induction motors
ISO/IEC 20968:2002 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
ISO/IEC 20970:2002 Information technology - Programming languages, their environments and system software
interfaces - JEFF file format
ISO/IEC/IEEE 21451-1:2010 Part 1: Network Capable Application Processor (NCAP) information model
ISO/IEC/IEEE 21451-2:2010 Part 2: Transducer to microprocessor communication protocols and Transducer
Electronic Data Sheet (TEDS) formats
ISO/IEC/IEEE 21451-4:2010 Part 4: Mixed-mode communication protocols and Transducer Electronic Data
Sheet (TEDS) formats
ISO/IEC/IEEE 21451-7:2011 Part 7: Transducer to radio frequency identification (RFID) systems
communication protocols and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC 21481:2012 Information technology – Telecommunications and information exchange between systems
– Near Field Communication Interface and Protocol -2 (NFCIP-2)
ISO 21482:2007 Ionizing-radiation warning – Supplementary symbol
ISO 21484:2017 Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOX pellets by the
gravimetric method
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 105/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 21485:2013 Textile machinery – Draw frame for cotton spinning – Vocabulary and principles of construction
ISO 21500 Guidance on project management
ISO 21505:2017 Project, programme and portfolio management - Guidance on governance
ISO 21528 Microbiology of the food chain - Horizontal method for the detection and enumeration of
Enterobacteriaceae
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 106/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 21992:2003 Information technology – Telecommunications and information exchange between systems
– Private Integrated Services Network – Mapping functions for the tunnelling of QSIG through IP networks
ISO 22266-1:2009 Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
ISO 22274:2013 Systems to manage terminology, knowledge and content - Concept-related aspects for
developing and internationalizing classification systems
ISO 22300:2012 Societal security - Terminology
ISO 22301:2012 Societal security – Business continuity management systems – Requirements
ISO 22307:2008 Financial services – Privacy impact assessment
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 107/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 22310:2006 Information and documentation - Guidelines for standards drafters for stating records
management requirements in standards
ISO 22316:2017 Security and resilience - Organizational resilience—Principles and attributes
ISO 22319:2017 Security and resilience - Community resilience - Guidelines for planning the involvement of
spontaneous volunteers
ISO 22324:2015 Societal security – Emergency management – Guidelines for colour-coded alerts
ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity
management
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and
services to address the needs of older persons and persons with disabilities
ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification
ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary
ISO 22514 Statistical methods in process management - Capability and performance
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 108/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 22857:2013 Health informatics – Guidelines on data protection to facilitate trans-border flows of personal
health data
ISO 22877:2004 Castors and wheels – Vocabulary, symbols and multilingual terminology
ISO 22951:2009 Data dictionary and message sets for preemption and prioritization signal systems for
emergency and public transport vehicles (PRESTO)
ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.
ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance
for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability
and reproducibility results
ISO 24156-1:2014 Part 1: Guidelines for using UML notation in terminology work
ISO 24294:2013 Timber – Round and sawn timber – Vocabulary
ISO 24393:2008 Rolling bearings - Linear motion rolling bearings - Vocabulary
ISO 24408:2005 Ships and marine technology - Position-indicating lights for life-saving appliances - Testing,
inspection and marking of production units
ISO 24409 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related
signs, safety notices and safety markings
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 111/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 24510:2007 Activities relating to drinking water and wastewater services – Guidelines for the assessment
and for the improvement of the service to users
ISO 24517 Document management - Engineering document format using PDF
ISO/IEC TR 24729-1:2008 Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C
ISO/IEC TR 24729-2:2008 Part 2: Recycling and RFID tags
ISO/IEC TR 24729-3:2009 Part 3: Implementation and operation of UHF RFID Interrogator systems in
logistics applications
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 113/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 24739-1:2009 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
ISO/IEC 24739-2:2009 Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7)
ISO/IEC 24739-3:2010 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3)
ISO/IEC 24740:2008 Information technology - Responsive Link (RL)
ISO/IEC TR 24741:2007 Information technology – Biometrics tutorial
ISO/IEC 24744:2014 Software Engineering – Metamodel for Development Methodologies
ISO/IEC 24745:2011 Information technology - Security techniques - Biometric information protection
ISO/IEC TR 24746:2005 Information technology - Generic cabling for customer premises - Mid-span DTE power
insertion
ISO/IEC 24747:2009 Information technology - Programming languages, their environments and system software
interfaces - Extensions to the C Library to support mathematical special functions
ISO/IEC 24748 Systems and software engineering - Life cycle management
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 114/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 24769-2:2013 Part 2: Test methods for air interface communication at 2,4 GHz
ISO/IEC 24769-5:2012 Part 5: Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface
ISO/IEC 24769-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24769-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24770:2012 Information technology - Real-time locating system (RTLS) device performance test
methods - Test methods for air interface communication at 2,4 GHz
ISO/IEC 24770-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24770-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24771:2014 Information technology – Telecommunications and information exchange between systems
– MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
ISO/IEC TR 24772:2013 Information technology - Programming languages - Guidance to avoiding vulnerabilities
in programming languages through language selection and use
ISO/IEC 24773:2008 Software engineering - Certification of software engineering professionals - Comparison
framework
ISO/IEC TR 24774:2010 Systems and software engineering - Life cycle management - Guidelines for process
description
ISO/IEC 24775 Information technology - Storage management
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 116/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC TS 25011:2017 Information technology - Systems and software quality requirements and evaluation
(SQuaRE) - Service quality models
ISO/IEC 25012:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Data quality model
ISO/IEC 25020:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Measurement reference model and guide
ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Quality measure elements
ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and
evaluation (SQuaRE) - Measurement of quality in use
ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Measurement of system and software product quality
ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Measurement of data quality
ISO/IEC 25030:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Quality requirements
ISO/IEC 25040:2011 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Evaluation process
ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
ISO/IEC 25045:2010 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Evaluation module for recoverability
ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation
(SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
ISO/IEC TR 25060:2010 Systems and software engineering - Systems and software product Quality
Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for
usability-related information
ISO/IEC 25062:2006 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) -
Common Industry Format (CIF) for usability test reports
ISO/IEC 25063:2014 Systems and software engineering - Systems and software product Quality Requirements
and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description
ISO/IEC 25064:2013 Systems and software engineering - Software product Quality Requirements and Evaluation
(SQuaRE) - Common Industry Format (CIF) for usability: User needs report
ISO/IEC 25066:2016 Systems and software engineering - Systems and software Quality Requirements and
Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability—Evaluation Report
ISO/TR 25100:2012 Intelligent transport systems – Systems architecture – Harmonization of ITS data concepts
ISO/TR 25102:2008 Intelligent transport systems – System architecture – 'Use Case' pro-forma template
ISO/TR 25104:2008 Intelligent transport systems – System architecture, taxonomy, terminology and data
modelling – Training requirements for ITS architecture
ISO/TS 25110:2013 Electronic fee collection – Interface definition for on-board account using integrated circuit
card (ICC)
ISO 25111:2009 Intelligent transport systems – Communications access for land mobiles (CALM) – General
requirements for using public networks
ISO 25112:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile
wireless broadband using IEEE 802.16
ISO 25113:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile
wireless broadband using HC-SDMA
ISO/TS 25114:2010 Intelligent transport systems – Probe data reporting management (PDRM)
ISO 25119 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 117/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 118/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 119/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 26925:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW
HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)
ISO/IEC TR 26927:2011 Information technology – Telecommunications and information exchange between
systems – Corporate telecommunication networks – Mobility for enterprise communications
ISO/TR 26999:2012 Intelligent transport systems – Systems architecture – Use of process-oriented methodology
in ITS International Standards and other deliverables
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 120/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
ISO 28005 Security management systems for the supply chain – Electronic port clearance (EPC)
ISO 28560-1:2014 Part 1: Data elements and general guidelines for implementation
ISO 28560-2:2014 Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
ISO 28560-3:2014 Part 3: Fixed length encoding
ISO/TS 28560-4:2014 Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag
with partitioned memory
ISO 28564 Public information guidance systems
ISO 28564-1:2010 Part 1: Design principles and element requirements for location plans, maps and diagrams
ISO 28564-2:2016 Part 2: Guidelines for the design and use of location signs and direction signs
ISO 28640:2010 Random variate generation methods
ISO/TR 28682:2008 Intelligent transport systems – Joint APEC-ISO study of progress to develop and deploy ITS
standards
ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk
quality (PRQ) and consumer's risk quality (CRQ)
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 122/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 29109 Information technology – Conformance testing methodology for biometric data interchange
formats defined in ISO/IEC 19794
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 123/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC TS 29140 Information technology for learning, education and training - Nomadicity and mobile
technologies
ISO/IEC 29167-11:2014 Part 11: Crypto suite PRESENT-80 security services for air interface communications
ISO/IEC 29167-12:2015 Part 12: Crypto suite ECC-DH security services for air interface communications
ISO/IEC 29167-13:2015 Part 13: Crypto suite Grain-128A security services for air interface communications
ISO/IEC 29167-14:2015 Part 14: Crypto suite AES OFB security services for air interface communications
ISO/IEC 29167-16:2015 Part 16: Crypto suite ECDSA-ECDH security services for air interface
communications
ISO/IEC 29167-17:2015 Part 17: Crypto suite cryptoGPS security services for air interface communications
ISO/IEC 29167-19:2016 Part 19: Crypto suite RAMON security services for air interface communications
ISO/IEC 29168 Information technology - Open systems interconnection
ISO/IEC 29173-1:2012 Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C
ISO/IEC 29175:2012 Information technology - Mobile item identification and management - User data for Mobile
AIDC services
ISO/IEC 29176:2011 Information technology - Mobile item identification and management - Consumer privacy-
protection protocol for Mobile RFID services
ISO/IEC 29177:2016 Information technology - Automatic identification and data capture technique - Identifier
resolution protocol for multimedia information access triggered by tag-based identification
ISO/IEC 29178:2012 Information technology - Mobile item identification and management - Service broker for
Mobile AIDC services
ISO/IEC 29179:2012 Information technology - Mobile item identification and management - Mobile AIDC
application programming interface
ISO/IEC 29180:2012 Information technology – Telecommunications and information exchange between systems
– Security framework for ubiquitous sensor networks
ISO/IEC TR 29181 Information technology – Future Network – Problem statement and requirements
ISO 29281-1:2013 Part 1: Fast networking & transport layer protocol (FNTP)
ISO 29281-2:2013 Part 2: Legacy system support
ISO 29282:2011 Intelligent transport systems – Communications access for land mobiles (CALM) – Satellite
networks
ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with
IEEE 802.20
ISO/TS 29284:2012 Intelligent transport systems – Event-based probe vehicle data
ISO/IEC 29341 Information technology - UPnP Device Architecture
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 126/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 29341-4-13:2011 Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control
Service
ISO/IEC 29341-4-14:2011 Part 4-14: Audio Video Device Control Protocol - Level 2 - Scheduled Recording
Service
ISO/IEC 29341-5-1:2008 Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera
Device
ISO/IEC 29341-5-10:2008 Part 5-10: Digital Security Camera Device Control Protocol - Digital Security
Camera Motion Image Service
ISO/IEC 29341-5-11:2008 Part 5-11: Digital Security Camera Device Control Protocol - Digital Security
Camera Settings Service
ISO/IEC 29341-5-12:2008 Part 5-12: Digital Security Camera Device Control Protocol - Digital Security
Camera Still Image Service
ISO/IEC 29341-6-1:2008 Part 6-1: Heating, Ventilation, and Air Conditioning Device Control Protocol - System
Device
ISO/IEC 29341-6-2:2008 Part 6-2: Heating, Ventilation, and Air Conditioning Device Control Protocol - Zone
Thermostat Device
ISO/IEC 29341-6-10:2008 Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol -
Control Valve Service
ISO/IEC 29341-6-11:2008 Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan
Operating Mode Service
ISO/IEC 29341-6-12:2008 Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan
Speed Service
ISO/IEC 29341-6-13:2008 Part 6-13: Heating, Ventilation, and Air Conditioning Device Control Protocol -
House Status Service
ISO/IEC 29341-6-14:2008 Part 6-14: Heating, Ventilation, and Air Conditioning Device Control Protocol -
Setpoint Schedule Service
ISO/IEC 29341-6-15:2008 Part 6-15: Heating, Ventilation, and Air Conditioning Device Control Protocol -
Temperature Sensor Service
ISO/IEC 29341-6-16:2008 Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol -
Temperature Setpoint Service
ISO/IEC 29341-6-17:2008 Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User
Operating Mode Service
ISO/IEC 29341-7-1:2008 Part 7-1: Lighting Device Control Protocol - Binary Light Device
ISO/IEC 29341-7-2:2008 Part 7-2: Lighting Device Control Protocol - Dimmable Light Device
ISO/IEC 29341-7-10:2008 Part 7-10: Lighting Device Control Protocol - Dimming Service
ISO/IEC 29341-7-11:2015 Part 7-11: Lighting Device Control Protocol - Switch Power Service
ISO/IEC 29341-8-1:2008 Part 8-1: Internet Gateway Device Control Protocol - Internet Gateway Device
ISO/IEC 29341-8-2:2008 Part 8-2: Internet Gateway Device Control Protocol - Local Area Network Device
ISO/IEC 29341-8-3:2008 Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device
ISO/IEC 29341-8-4:2008 Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection
Device
ISO/IEC 29341-8-5:2008 Part 8-5: Internet Gateway Device Control Protocol - Wireless Local Area Network
Access Point Device
ISO/IEC 29341-8-10:2008 Part 8-10: Internet Gateway Device Control Protocol - Local Area Network Host
Configuration Management Service
ISO/IEC 29341-8-11:2008 Part 8-11: Internet Gateway Device Control Protocol - Layer 3 Forwarding Service
ISO/IEC 29341-8-12:2008 Part 8-12: Internet Gateway Device Control Protocol - Link Authentication Service
ISO/IEC 29341-8-13:2008 Part 8-13: Internet Gateway Device Control Protocol - Radius Client Service
ISO/IEC 29341-8-14:2008 Part 8-14: Internet Gateway Device Control Protocol - Wide Area Network Cable
Link Configuration Service
ISO/IEC 29341-8-15:2008 Part 8-15: Internet Gateway Device Control Protocol - Wide Area Network Common
Interface Configuration Service
ISO/IEC 29341-8-16:2008 Part 8-16: Internet Gateway Device Control Protocol - Wide Area Network Digital
Subscriber Line Configuration Service
ISO/IEC 29341-8-17:2008 Part 8-17: Internet Gateway Device Control Protocol - Wide Area Network Ethernet
Link Configuration Service
ISO/IEC 29341-8-18:2008 Part 8-18: Internet Gateway Device Control Protocol - Wide Area Network Internet
Protocol Connection Service
ISO/IEC 29341-8-19:2008 Part 8-19: Internet Gateway Device Control Protocol - Wide Area Network Plain Old
Telephone Service Link Configuration Service
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 127/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 29341-8-20:2008 Part 8-20: Internet Gateway Device Control Protocol - Wide Area Network Point-to-
Point Protocol Connection Service
ISO/IEC 29341-8-21:2008 Part 8-21: Internet Gateway Device Control Protocol - Wireless Local Area Network
Configuration Service
ISO/IEC 29341-9-1:2008 Part 9-1: Imaging Device Control Protocol - Printer Device
ISO/IEC 29341-9-2:2008 Part 9-2: Imaging Device Control Protocol - Scanner
ISO/IEC 29341-9-10:2008 Part 9-10: Imaging Device Control Protocol - External Activity Service
ISO/IEC 29341-9-11:2008 Part 9-11: Imaging Device Control Protocol - Feeder Service
ISO/IEC 29341-9-12:2008 Part 9-12: Imaging Device Control Protocol - Print Basic Service
ISO/IEC 29341-9-13:2008 Part 9-13: Imaging Device Control Protocol - Scan Service
ISO/IEC 29341-10-1:2008 Part 10-1: Quality of Service Device Control Protocol - Quality of Service
Architecture
ISO/IEC 29341-10-10:2008 Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device
ISO/IEC 29341-10-11:2008 Part 10-11: Quality of Service Device Control Protocol - Quality of Service
Manager Service
ISO/IEC 29341-10-12:2008 Part 10-12: Quality of Service Device Control Protocol - Quality of Service Policy
Holder Service
ISO/IEC 29341-11-1:2008 Part 11-1: Quality of Service Device Control Protocol - Level 2 - Quality of Service
Architecture
ISO/IEC 29341-11-2:2008 Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service
Schemas
ISO/IEC 29341-11-10:2008 Part 11-10: Quality of Service Device Control Protocol - Level 2 - Quality of
Service Device Service
ISO/IEC 29341-11-11:2008 Part 11-11: Quality of Service Device Control Protocol - Level 2 - Quality of
Service Manager Service
ISO/IEC 29341-11-12:2008 Part 11-12: Quality of Service Device Control Protocol - Level 2 - Quality of
Service Policy Holder Service
ISO/IEC 29341-12-1:2015 Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface
Client Device
ISO/IEC 29341-12-2:2015 Part 12-2: Remote User Interface Device Control Protocol - Remote User Interface
Server Device
ISO/IEC 29341-12-10:2015 Part 12-10: Remote User Interface Device Control Protocol - Remote User
Interface Client Service
ISO/IEC 29341-12-11:2015 Part 12-11: Remote User Interface Device Control Protocol - Remote User
Interface Server Service
ISO/IEC 29341-13-10:2008 Part 13-10: Device Security Device Control Protocol - Device Security Service
ISO/IEC 29341-13-11:2008 Part 13-11: Device Security Device Control Protocol - Security Console Service
ISO/IEC 29341-14-3:2011 Part 14-3: Audio Video Device Control Protocol - Level 3 - Media Server Device
ISO/IEC 29341-14-12:2011 Part 14-12: Audio Video Device Control Protocol - Level 3 - Audio Video Content
Directory Service
ISO/IEC 29341-15-10:2011 Part 15-10: Content Synchronization Device Control Protocol - Content
Synchronization Service
ISO/IEC 29341-16-1:2011 Part 16-1: Low Power Device Control Protocol - Low Power
ISO/IEC 29341-16-10:2011 Part 16-10: Low Power Device Control Protocol - Low Power Proxy Service
ISO/IEC 29341-16-11:2011 Part 16-11: Low Power Device Control Protocol - Low Power Service
ISO/IEC 29341-17-1:2011 Part 17-1: Quality of Service Device Control Protocol - Level 3 - Quality of Service
Architecture
ISO/IEC 29341-17-10:2011 Part 17-10: Quality of Service Device Control Protocol - Level 3 - Quality of
Service Device Service
ISO/IEC 29341-17-11:2011 Part 17-11: Quality of Service Device Control Protocol - Level 3 - Quality of
Service Manager Service
ISO/IEC 29341-17-12:2011 Part 17-12: Quality of Service Device Control Protocol - Level 3 - Quality of
Service Policy Holder Service
ISO/IEC 29341-17-13:2011 Part 17-13: Quality of Service Device Control Protocol - Level 3 - Quality of
Service Device Service - Underlying Technology Interfaces
ISO/IEC 29341-18-1:2011 Part 18-1: Remote Access Device Control Protocol - Remote Access Architecture
ISO/IEC 29341-18-2:2011 Part 18-2: Remote Access Device Control Protocol - Remote Access Client Device
ISO/IEC 29341-18-3:2011 Part 18-3: Remote Access Device Control Protocol - Remote Access Server Device
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 128/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC 29341-18-4:2011 Part 18-4: Remote Access Device Control Protocol - Remote Access Discovery
Agent Device
ISO/IEC 29341-18-10:2011 Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound
Connection Configuration Service
ISO/IEC 29341-18-11:2011 Part 18-11: Remote Access Device Control Protocol - Remote Access Discovery
Agent Service
ISO/IEC 29341-18-12:2011 Part 18-12: Remote Access Device Control Protocol - Remote Access Discovery
Agent Synchronization Service
ISO/IEC 29341-18-13:2011 Part 18-13: Remote Access Device Control Protocol - Remote Access Transport
Agent Configuration Service
ISO/IEC 29341-19-1:2011 Part 19-1: Solar Protection Blind Device Control Protocol - Solar Protection Blind
Device
ISO/IEC 29341-19-10:2011 Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion
Motor Service
ISO/IEC 29341-30-1:2017 Part 30-1: IoT management and control device control protocol - IoT management
and control architecture overview
ISO/IEC 29341-30-2:2017 Part 30-2: IoT management and control device control protocol - IoT management
and control device
ISO/IEC 29341-30-10:2017 Part 30-10: IoT management and control device control protocol - Data store
service
ISO/IEC 29341-30-11:2017 Part 30-11: IoT management and control device control protocol - IoT
management and control data model service
ISO/IEC 29341-30-12:2017 Part 30-12: IoT management and control device control protocol - IoT
management and control transport generic service
ISO/IEC 29361:2008 Information technology – Web Services Interoperability – WS-I Basic Profile Version 1.1
ISO/IEC 29362:2008 Information technology – Web Services Interoperability – WS-I Attachments Profile Version
1.0
ISO/IEC 29363:2008 Information technology – Web Services Interoperability – WS-I Simple SOAP Binding Profile
Version 1.0
ISO 29383:2010 Terminology policies - Development and implementation
ISO 29404:2015 Ships and marine technology - Offshore wind energy - Supply chain information flow
ISO 29461 Air intake filter systems for rotary machinery – Test methods
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 129/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 130/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
ISO/IEC TR 30114 Information technology - Extensions of Office Open XML file formats
ISO 50001:2011 Energy management systems – Requirements with guidance for use
ISO 50002:2014 Energy audits – Requirements with guidance for use
ISO 50003:2014 Energy management systems – Requirements for bodies providing audit and certification of
energy management systems
ISO 50004:2014 Energy management systems – Guidance for the implementation, maintenance and
improvement of an energy management system
ISO 50006:2014 Energy management systems – Measuring energy performance using energy baselines (EnB)
and energy performance indicators (EnPI) – General principles and guidance
ISO 50015:2014 Energy management systems – Measurement and verification of energy performance of
organizations—General principles and guidance
ISO 50047:2016 Energy savings – Determination of energy savings in organizations
ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system
ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system
ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
ISO/ASTM 51401:2013 Practice for use of a dichromate dosimetry system
ISO/ASTM 51431:2005 Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for
food processing
ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at
energies between 50 keV and 7.5 MeV
ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements
and dosimetery system calibrations
ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies
between 300 keV and 25 MeV
ISO/ASTM 51650:2013 Practice for use of a cellulose triacetate dosimetry system
ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies
between 80 and 300 keV
ISO/ASTM 51900:2009 Guide for dosimetry in radiation research on food and agricultural products
ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation
processing
ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in
radiation processing
ISO/ASTM 52900:2015 Additive manufacturing - General principles - Terminology
ISO/ASTM 52915:2016 Specification for additive manufacturing file format (AMF) Version 1.2
ISO 55000:2014 Asset management – Overview, principles and terminology
ISO 55001:2014 Asset management – Management systems – Requirements
ISO 55002:2014 Asset management – Management systems – Guidelines for the application of ISO 55001
IEC/TR 80002-1:2009 Part 1: Guidance on the application of ISO 14971 to medical device software
ISO/TR 80002-2:2017 Part 2: Validation of software for medical device quality systems
IEC/TR 80002-3:2014 Part 3: Process reference model of medical device software life cycle processes (IEC
62304)
ISO/TS 80004 Nanotechnologies – Vocabulary
ISO/IEC/IEEE 80005 Utility connections in port
ISO/IEC/IEEE 80005-1:2012 Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
IEC/IEEE 80005-2:2016 Part 2: High and low voltage shore connection systems - Data communication for
monitoring and control
IEC/PAS 80005-3:2014 Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
ISO/IEC 80079 Explosive atmospheres
ISO/IEC 80079-20-2:2016 Part 20-2: Material characteristics - Combustible dusts test methods
ISO/IEC 80079-34:2011 Part 34: Application of quality systems for equipment manufacture
ISO 80079-36:2016 Part 36: Non-electrical equipment for explosive atmospheres - Basic method and
requirements
ISO 80079-37:2016 Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of
protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
ISO/IEC 80079-38:2016 Part 38: Equipment and components in explosive atmospheres in underground mines
ISO/IEC 80369 Small-bore connectors for liquids and gases in healthcare applications
ISO 80601-2-12:2011 Part 2-12: Particular requirements for basic safety and essential performance of critical
care ventilators
ISO 80601-2-13:2011 Part 2-13: Particular requirements for basic safety and essential performance of an
anaesthetic workstation
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 134/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
IEC 80601-2-30:2009 Part 2-30: Particular requirements for basic safety and essential performance of
automated non-invasive sphygmomanometers
ISO 80601-2-55:2011 Part 2-55: Particular requirements for the basic safety and essential performance of
respiratory gas monitors
ISO 80601-2-61:2011 Part 2-61: Particular requirements for basic safety and essential performance of pulse
oximeter equipment
ISO 80601-2-67:2014 Part 2-67: Particular requirements for basic safety and essential performance of
oxygen-conserving equipment
ISO 80601-2-69:2014 Part 2-69: Particular requirements for basic safety and essential performance of oxygen
concentrator equipment
ISO 80601-2-70:2015 Part 2-70: Particular requirements for basic safety and essential performance of sleep
apnoea breathing therapy equipment
IEC 80601-2-71:2015 Part 2-71: Particular requirements for the basic safety and essential performance of
functional Near-Infrared Spectroscopy (NIRS) equipment
ISO 80601-2-72:2015 Part 2-72: Particular requirements for basic safety and essential performance of home
healthcare environment ventilators for ventilator-dependent patients
ISO 80601-2-74:2017 Part 2-74: Particular requirements for basic safety and essential performance of
respiratory humidifying equipment
ISO 81060 Non-invasive sphygmomanometers
ISO 81060-1:2007 Part 1: Requirements and test methods for non-automated measurement type
ISO 81060-2:2013 Part 2: Clinical investigation of automated measurement type
ISO/IEC 81346 Industrial systems, installations and equipment and industrial products - Structuring principles and
reference designations
See also
International Classification for Standards
List of ASTM International standards
List of DIN standards
List of EN standards
List of IEC standards
List of ISO Technical Committees
Notes
1. This list generally excludes draft versions.
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 135/136
10/25/2017 List of International Organization for Standardization standards - Wikipedia
References
1. "Standards catalogue" (https://www.iso.org/standards-catalogue/browse-by-ics.html). ISO.
2. "Freely Available Standards" (http://standards.iso.org/ittf/PubliclyAvailableStandards/index.html). ISO.
3. "Compressed air - Energy efficiency - Assessment" (https://www.iso.org/standard/46580.html). Standards
catalogue. ISO. Retrieved 23 October 2017.
External links
International Organization for Standardization (https://www.iso.org)
ISO Certification Provider (http://www.eiamsconsulting.com/)
Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using
this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia
Foundation, Inc., a non-profit organization.
https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards 136/136