Professional Documents
Culture Documents
BCHCODE19CH06
BCHCODE19CH06
BCHCODE19CH06
highlighted in green
Chapter VI
Summary of minimum requirements
For the purpose of application of the minimum requirements under this Code,
the cross-references in the IBC Code shown in the left-hand column of the
following table should be taken to mean references to the BCH Code shown
in the right-hand column. Where a reference is made in the BCH Code to
column m in the table of chapter VI it should be taken to mean any of the
columns m, n and o in the table of chapter 17 of the IBC Code.
*
Numbers in parentheses refer to the sections of the text that are cited in the explanatory
notes in chapter 17 of the IBC Code.
{
Numbers in parentheses refer to sections of the text of the BCH Code corresponding to the
equivalent sections of the IBC Code.
78
BCH Code – Chapter VI
IBC Code chapter 17 items IBC Code reference* BCH Code reference{
Electrical equipment (column i)
NF: non-flammable product (10.1.6) Standard electrical
system
Yes: Flashpoint exceeding (10.1.6) Standard electrical
608C (closed-cup) system
No: Product having a flash- (10.1.6) Special electrical
point not exceeding 608C systems
(closed-cup)
Gauging (column j)
O: open gauging (13.1.1.1) Open device
(3.9(a))
R: restricted gauging (13.1.1.2) Restricted device
(3.9(b))
C: closed gauging (13.1.1.3) Closed device
(3.9(c))
I: indirect gauging (13.1.1.3) Indirect device
(3.9(d))
79
BCH Code – Chapter VI
IBC Code chapter 17 items IBC Code reference BCH Code reference
15.5.14–26 4.20.15–27
15.6 4.6
15.7 4.5
15.8 4.7
15.9 4.21
15.10 4.3
15.11 4.8
15.12 4.9
15.13 4.10
15.14 4.11
15.16.2 4.15.2
15.17 4.13.1
15.18 4.13.2
15.19 4.14
15.19.6 4.14.1
15.20 4.22
15.21 4.23
16.2.6 5.2.5
16.2.9 5.2.8
16.6 4.18.1
16.6.1 4.18.1*
16.6.2 4.18.2*
16.6.3 4.18.3*
16.6.4 4.18.4*
16A.2.2 5A.2.2
*
These amendments were adopted by the Marine Environment Protection Committee by
resolution MEPC.70(38) on 10 July 1996. They became effective on 1 July 1998.
80