Professional Documents
Culture Documents
Batching Plant que1
Batching Plant que1
C) Erection permit
बी/पी मिक्सर में चिपिंग करते समय आप किस प्रणाली का पालन करेंगे ?
A) POCO
B) TOLO
C) LOTO
D) VIVO
3)while welding in B/P the below safety apparatus required to put out the fire ?
A) Water
B) Sand
C) Fire extinguisher
D) Diesel/Petrol
4)While fired in electrical line which type of fire extinguisher should use?
विद्युत लाइन में आग लगाते समय किस प्रकार के अग्नि मक का उपयोग करना चाहिए ?
A) Water
B) Sand
C) Foam
D) CO2
कता
सीमेंट फीडिंग गतिविधि के दौरान किस प्रकार के पीपीई की आवयकता होती है ?
श्य
A) Nose Mask
B) Welding shield
C) Safety belt
D) Shoulder Pad
A) 4S
B) 5K
C) 5S
D) 6S
A) Weekly
B) Monthly
C) Not required
D) Every day
A) Helper
B) QC supervisor
C) Authorized Operator
D) Civil Engineer
9)If there is any Electrical fault in DG/Plant EB Panel Who is authorized to rectify?
यदि डीजी/प्लांट ईबी पैनल में कोई विद्युत खराबी है तो उसे सुधारने के लिए कौन अधिकृत है?
A) QC Supervisor
B) Welder
C) Authorized Electrician
D) Plant Mechanic
10)If you see an unsafe act /Unsafe condition in your B/Plant what will you do?
यदि आप अपने बी/संयंत्र में कोई असुरक्षित कार्य/असुरक्षित स्थिति देखते हैं तो आप क्या
करेंगे?
सीमेंट साइलो से दबाव और अतिरिक्त प्रदूषित धूल को मुक्त करने के लिए किस भाग का उपयोग किया जाता है?
किसी भी घटना के लिए कन्वेयर के पास किस प्रकार का सुरक्षा उपकरण प्रदान किया गया,
A) Emergency switch
B) Safety limit switch
C) Conveyor stoppage limit switch
D) Pull chord switch
13) What is the name of sensor used in skip rope position sensing?
स्किप रोप पोजीशन सेंसिंग में प्रयुक्त सेंसर का नाम क्या है?
14) Why we fixed the indicator (Beacon light) in top of the cold bin?
A) Monthly progress
B) Weekly Progress
C) Yearly progress
D) Daily and continual progress
16) Why housekeeping to be done?
A) To protect human lives as well as provide safety to electrical devices and appliances
from leakage current.
B) Provides an alternative and easy path for leakage or faulty current to flow.
C) Safety of Equipment
D) All the above
A) 52000
B) 38000
C) 40500
D) 45500
20) What is the air gap between pressure plate and brake coil?
प्रेशर प्लेट और ब्रेक कॉइल के बीच एयर गैप कितना होता है?
A) 0.4 MM to 0.5 MM
B) 0.5 MM to 0.7 MM
C) 0.6 MM to 0.8 MM
D) 0.4 MM to 0.6 MM
Name:
Token No:
Designation:
Date:
Place:
TOTAL MARKS :
MARKS OBTAINED :
ACCESSED BY :