Professional Documents
Culture Documents
Conduction
Conduction
in contact with each other. In physics, the word "conduction" is used to describe three
different types of behavior, which are defined by the type of energy being transferred:
• Heat conduction (or thermal conduction) is the transfer of energy from a warmer substance
to a colder one through direct contact, such as someone touching the handle of a hot metal
skillet.
• Electrical conduction is the transfer of electrically charged particles through a medium, such
as electricity traveling through the power lines in your house.
• Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium,
such as vibrations from loud music passing through a wall.
A material that provides good conduction is called a conductor, while a material that
provides poor conduction is called an insulator.
Heat Conduction
For example, if an iron bar is heated at one end, as shown in the image above, the heat
is understood physically as the vibration of the individual iron atoms within the bars. The
atoms on the cooler side of the bar vibrate with less energy. As the energetic particles vibrate,
they come into contact with adjacent iron atoms and impart some of their energy to those
other iron atoms. Over time, the hot end of the bar loses energy and the cool end of the bar
gains energy, until the entire bar is the same temperature. This is a state known as thermal
equilibrium.
In considering heat transfer, though, the above example is missing one important
point: the iron bar is not an isolated system. In other words, not all of the energy from the
heated iron atom is transferred by conduction into the adjacent iron atoms. Unless it's being
held suspended by an insulator in a vacuum chamber, the iron bar is also in physical contact
with a table or anvil or another object, and it is also in contact with the air around it. As air
particles come into contact with the bar, they too will gain energy and carry it away from the
bar (though slowly, because the thermal conductivity of unmoving air is very small). The bar is
also so hot that it is glowing, which means that it is radiating some of its heat energy in the
form of light. This is another way in which the vibrating atoms are losing energy. If left alone,
the bar will eventually cool down and reach thermal equilibrium with the surrounding air.
Electrical Conduction
Certain materials, when cooled to nearly absolute zero, lose all electrical resistance
and allow electrical current to flow through them with no loss of energy. These materials are
called superconductors.
Sound Conduction