Professional Documents
Culture Documents
使用說明書(英文)_XC125(4P9)
使用說明書(英文)_XC125(4P9)
OWNER’S MANUAL
XC125
4P9-F8199-E4
2('KPFF
EAU46090
Q Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is
sold.
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
INTRODUCTION
EAU10113
As the owner of the XC125, you are benefiting from Yamaha’s vast experience and newest technology regarding the de-
sign and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of your XC125. The Owner's Manual
does not only instruct you in how to operate, inspect and maintain your scooter, but also in how to safeguard yourself
and others from trouble and injury.
In addition, the many tips given in this manual will help keep your scooter in the best possible condition. If you have any
further questions, do not hesitate to contact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first!
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most
current product information available at the time of printing, there may be minor discrepancies between your scooter and
this manual. If there is any question concerning this manual, please consult a Yamaha dealer.
EWA12411
WARNING
Please read this manual carefully and completely before operating this scooter.
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
IMPORTANT MANUAL INFORMATION
EAU10132
A NOTICE indicates special precautions that must be taken to avoid damage to the
NOTICE
vehicle or other property.
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
IMPORTANT MANUAL INFORMATION
EAUT1390
XC125
OWNER’S MANUAL
©2010 by Yamaha Motor Taiwan Co., Ltd.
1st edition, October 2010
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Yamaha Motor Taiwan Co., Ltd.
is expressly prohibited.
Printed in Taiwan.
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
TABLE OF CONTENTS
SAFETY INFORMATION .................... 1-1 OPERATION AND IMPORTANT RIDING Adjusting the rear brake lever free
Further safe-riding points ................. 1-5 POINTS ............................................... 5-1 play ............................................. 6-18
Starting the engine ........................... 5-1 Checking the front brake pads and
DESCRIPTION .................................... 2-1 Starting off........................................ 5-2 rear brake shoes......................... 6-19
Left view ........................................... 2-1 Acceleration and deceleration.......... 5-2 Checking the brake fluid level ........ 6-19
Right view......................................... 2-2 Braking ............................................. 5-2 Changing the brake fluid ................ 6-20
Controls and instruments ................. 2-3 Tips for reducing fuel consumption .. 5-3 Checking and lubricating the
Engine break-in ................................ 5-3 cables ......................................... 6-21
INSTRUMENT AND CONTROL FUNC- Parking ............................................. 5-4 Checking and lubricating the throttle grip
TIONS.................................................. 3-1 and cable .................................... 6-21
Main switch/steering lock ................. 3-1 PERIODIC MAINTENANCE AND AD- Lubricating the front and rear brake
Keyhole cover .................................. 3-2 JUSTMENT ......................................... 6-1 levers .......................................... 6-21
Indicator and warning lights ............. 3-2 Owner’s tool kit................................. 6-2 Checking and lubricating the
Speedometer.................................... 3-3 Periodic maintenance chart for the centerstand and sidestand.......... 6-22
Multi-function display........................ 3-3 emission control system ............... 6-3 Checking the front fork ................... 6-23
Handlebar switches.......................... 3-5 General maintenance and lubrication Checking the steering .................... 6-23
Front brake lever .............................. 3-6 chart.............................................. 6-4 Checking the wheel bearings ......... 6-24
Rear brake lever............................... 3-6 Removing and installing panels ....... 6-7 Battery............................................ 6-24
Fuel tank cap.................................... 3-7 Checking the spark plug................... 6-8 Replacing the fuses........................ 6-26
Fuel .................................................. 3-7 Engine oil and oil strainer............... 6-10 Replacing the headlight bulb.......... 6-27
Catalytic converters.......................... 3-9 Final transmission oil...................... 6-12 Replacing a front turn signal light
Kickstarter ........................................ 3-9 Air filter and V-belt case air filter bulb ............................................. 6-28
Seat................................................ 3-10 elements ..................................... 6-13 Replacing the tail/brake light bulb or a
Storage compartments................... 3-10 Checking the throttle grip free rear turn signal light bulb ............ 6-28
Sidestand ....................................... 3-11 play ............................................. 6-15 Replacing an auxiliary light bulb..... 6-29
Ignition circuit cut-off system.......... 3-12 Valve clearance.............................. 6-15 Troubleshooting ............................. 6-29
Tires ............................................... 6-16 Troubleshooting chart .................... 6-31
FOR YOUR SAFETY - PRE-OPERATION Cast wheels.................................... 6-17
CHECKS ............................................. 4-1 Checking the brake lever free SCOOTER CARE AND STORAGE .... 7-1
play ............................................. 6-18 Matte color caution........................... 7-1
Care ................................................. 7-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
TABLE OF CONTENTS
Storage............................................. 7-4
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
EAU10268
sure it is in safe operating condition. • Ride where other motorists can
Be a Responsible Owner
Failure to inspect or maintain the ve- see you. Avoid riding in another
As the vehicle’s owner, you are re-
hicle properly increases the possibility motorist’s blind spot.
sponsible for the safe and proper op-
of an accident or equipment damage. ● Many accidents involve inexpe-
1 eration of your scooter.
See page 4-2 for a list of pre-opera- rienced operators. In fact, many
Scooters are single-track vehicles.
tion checks. operators who have been in-
Their safe use and operation are de-
2 ● This scooter is designed to carry volved in accidents do not even
pendent upon the use of proper riding
the operator and a passenger. have a current driver’s license.
techniques as well as the expertise of
● The failure of motorists to detect • Make sure that you are quali-
3 the operator. Every operator should
and recognize scooters in traf- fied and that you only lend your
know the following requirements be-
fi c is the predominating cause scooter to other qualifi ed op-
4 fore riding this scooter.
of automobile/scooter accidents. erators.
He or she should:
Many accidents have been • Know your skills and limits.
● Obtain thorough instructions from
5 caused by an automobile driver Staying within your limits may
a competent source on all as-
who did not see the scooter. Mak- help you to avoid an accident.
pects of scooter operation.
ing yourself conspicuous appears • We recommend that you prac-
6 ● Observe the warnings and main-
to be very effective in reducing tice riding your scooter where
tenance requirements in this
the chance of this type of acci- there is no traffic until you have
7
Owner’s Manual.
dent. become thoroughly familiar
● Obtain qualifi ed training in safe
with the scooter and all of its
and proper riding techniques.
8 Therefore: controls.
● Obtain professional technical ser-
• Wear a brightly colored jacket. ● Many accidents have been
vice as indicated in this Owner’s
• Use extra caution when you caused by error of the scooter
9 Manual and/or when made nec-
are approaching and passing operator. A typical error made by
essary by mechanical conditions.
through intersections, since in- the operator is veering wide on
tersections are the most likely a turn due to excessive speed or
Safe Riding
places for scooter accidents to undercornering (insufficient lean
Perform the pre-operation checks
occur. angle for the speed).
each time you use the vehicle to make
1-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
• Always obey the speed limit off-road use. ● A passenger should also observe
and never travel faster than the above precautions.
warranted by road and traffi c Protective Apparel
conditions. The majority of fatalities from scooter Avoid Carbon Monoxide Poisoning
• Always signal before turning or accidents are the result of head inju- All engine exhaust contains carbon 1
changing lanes. Make sure that ries. The use of a safety helmet is the monoxide, a deadly gas. Breathing
other motorists can see you. single most critical factor in the pre- carbon monoxide can cause head- 2
● The posture of the operator and vention or reduction of head injuries. aches, dizziness, drowsiness, nausea,
passenger is important for proper ● Always wear an approved helmet. confusion, and eventually death. 3
control. ● Wear a face shield or goggles. Carbon Monoxide is a colorless,
• The operator should keep both Wind in your unprotected eyes odorless, tasteless gas which may
hands on the handlebar and could contribute to an impairment be present even if you do not see or 4
both feet on the operator foot- of vision that could delay seeing a smell any engine exhaust. Deadly
rests during operation to main- hazard. levels of carbon monoxide can collect 5
tain control of the scooter. ● The use of a jacket, substantial rapidly and you can quickly be over-
• The passenger should always shoes, trousers, gloves, etc., is come and unable to save yourself.
6
hold onto the operator, the seat effective in preventing or reducing Also, deadly levels of carbon mon-
strap or grab bar, if equipped, abrasions or lacerations. oxide can linger for hours or days in
with both hands and keep both ● Never wear loose-fi tting clothes, enclosed or poorly ventilated areas. 7
feet on the passenger foot- otherwise they could catch on If you experience any symptoms of
rests. Never carry a passenger the control levers or wheels and carbon monoxide poisoning, leave the 8
unless he or she can fi rmly cause injury or an accident. area immediately, get fresh air, and
place both feet on the passen- ● Always wear protective clothing SEEK MEDICAL TREATMENT.
ger footrests. that covers your legs, ankles, ● Do not run engine indoors. Even
9
● Never ride under the influence of and feet. The engine or exhaust if you try to ventilate engine ex-
alcohol or other drugs. system become very hot during haust with fans or open windows
● This scooter is designed for on- or after operation and can cause and doors, carbon monoxide can
road use only. It is not suitable for burns. rapidly reach dangerous levels.
1-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
● Do not run engine in poorly ven- heavy items to the handlebar,
tilated or partially enclosed areas Maximum load: front fork, or front fender. Such
such as barns, garages, or car- 157 kg (346 lb) items can create unstable
ports. handling or a slow steering re-
1 ● Do not run engine outdoors When loading within this weight limit, sponse.
where engine exhaust can be keep the following in mind: ● This vehicle is not designed to
● Cargo and accessory weight
2 drawn into a building through pull a trailer or to be attached
openings such as windows and should be kept as low and close to a sidecar.
doors. to the scooter as possible. Se-
3 curely pack your heaviest items Genuine Yamaha Accessories
Loading as close to the center of the ve- Choosing accessories for your vehicle
4 Adding accessories or cargo to your hicle as possible and make sure is an important decision. Genuine
scooter can adversely affect stability to distribute the weight as evenly Yamaha accessories, which are avail-
and handling if the weight distribution as possible on both sides of the able only from a Yamaha dealer, have
5
of the scooter is changed. To avoid scooter to minimize imbalance or been designed, tested, and approved
the possibility of an accident, use ex- instability. by Yamaha for use on your vehicle.
6 ● Shifting weights can create a
treme caution when adding cargo or Many companies with no connection
accessories to your scooter. Use extra sudden imbalance. Make sure to Yamaha manufacture parts and ac-
7 care when riding a scooter that has that accessories and cargo are cessories or offer other modifications
added cargo or accessories. Here, securely attached to the scooter for Yamaha vehicles. Yamaha is not
along with the information about ac- before riding. Check accessory in a position to test the products that
8
cessories below, are some general mounts and cargo restraints fre- these aftermarket companies pro-
guidelines to follow if loading cargo to quently. duce. Therefore, Yamaha can neither
9 your scooter: • Properly adjust the suspen- endorse nor recommend the use of
The total weight of the operator, sion for your load (suspension- accessories not sold by Yamaha or
passenger, accessories and cargo adjustable models only), and modifications not specifically recom-
must not exceed the maximum load check the condition and pres- mended by Yamaha, even if sold and
limit. Operation of an overloaded sure of your tires. installed by a Yamaha dealer.
vehicle could cause an accident. • Never attach any large or
1-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
Aftermarket Parts, Accessories, travel or control operation, or ob- sories are not recommended.
and Modifications scure lights or reflectors. ● Use caution when adding electri-
While you may find aftermarket prod- • Accessories fi tted to the han- cal accessories. If electrical ac-
ucts similar in design and quality to dlebar or the front fork area can cessories exceed the capacity of
genuine Yamaha accessories, recog- create instability due to improp- the scooter’s electrical system, an 1
nize that some aftermarket accesso- er weight distribution or aerody- electric failure could result, which
ries or modifications are not suitable namic changes. If accessories could cause a dangerous loss of 2
because of potential safety hazards are added to the handlebar or lights or engine power.
to you or others. Installing aftermarket front fork area, they must be 3
products or having other modifications as lightweight as possible and Aftermarket Tires and Rims
performed to your vehicle that change should be kept to a minimum. The tires and rims that came with your
any of the vehicle’s design or opera- • Bulky or large accessories may scooter were designed to match the 4
tion characteristics can put you and seriously affect the stability of performance capabilities and to pro-
others at greater risk of serious injury the scooter due to aerodynamic vide the best combination of handling, 5
or death. You are responsible for inju- effects. Wind may attempt to braking, and comfort. Other tires,
ries related to changes in the vehicle. lift the scooter, or the scooter rims, sizes, and combinations may not
6
Keep the following guidelines in mind, may become unstable in cross be appropriate. Refer to page 6-16 for
as well as those provided under winds. These accessories may tire specifications and more informa-
“Loading” when mounting accesso- also cause instability when tion on replacing your tires. 7
ries. passing or being passed by
● Never install accessories or carry large vehicles. Transporting the Scooter 8
cargo that would impair the per- • Certain accessories can dis- Be sure to observe following instruc-
formance of your scooter. Care- place the operator from his or tions before transporting the scooter
fully inspect the accessory before her normal riding position. This in another vehicle. 9
using it to make sure that it does improper position limits the ● Remove all loose items from the
not in any way reduce ground freedom of movement of the scooter.
clearance or cornering clearance, operator and may limit control ● Point the front wheel straight
limit suspension travel, steering ability, therefore, such acces- ahead on the trailer or in the truck
1-4
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
EAU10372
bed, and choke it in a rail to pre- corner or turn. Once you have
vent movement. Further safe-riding points completed a turn, accelerate
● Secure the scooter with tie-downs ● Be sure to signal clearly when slowly.
or suitable straps that are at- making turns. ● Be careful when passing parked
1 tached to solid parts of the scoot- cars. A driver might not see you
er, such as the frame or upper and open a door in your path.
2 front fork triple clamp (and not, for ● Railroad crossings, streetcar
example, to rubber-mounted han- rails, iron plates on road con-
3
dlebars or turn signals, or parts struction sites, and manhole
that could break). Choose the covers become extremely slip-
location for the straps carefully pery when wet. Slow down and
4 so the straps will not rub against cross them with caution. Keep the
painted surfaces during transport. ZAUM00**
scooter upright, otherwise it could
5 ● The suspension should be com- slide out from under you.
pressed somewhat by the tie- ● The brake pads could get wet
downs, if possible, so that the when you wash the scooter. After
6
scooter will not bounce exces- washing the scooter, check the
sively during transport. brakes before riding.
7 ● Always wear a helmet, gloves,
trousers (tapered around the cuff
8 and ankle so they do not fl ap),
ZAUM00**
and a bright colored jacket.
● Braking can be extremely difficult ● Do not carry too much luggage
9 on the scooter. An overloaded
on a wet road. Avoid hard brak-
ing, because the scooter could scooter is unstable. Use a strong
slide. Apply the brakes slowly cord to secure any luggage to
when stopping on a wet surface. the carrier (if equipped). A loose
● Slow down as you approach a load will affect the stability of the
1-5
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
Q SAFETY INFORMATION
scooter and could divert your at-
tention from the road. (See page
1-1.)
1
1-6
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU10401
DESCRIPTION
EAU10410
Left view
2
2 3 4
1
4
6
6
7
8 5
9
1. Fuel tank cap (page 3-7)
2. Rear storage compartment (page 3-10)
3. Rear turn signal light (page 6-28)
4. Tail/brake light (page 6-28)
5. Kickstarter (page 3-9)
6. Air filter (page 6-13)
2-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU10401
DESCRIPTION
EAU10420
Right view
2
2
1 3
3 4
4
5
5 6
9
1. Battery (page 6-24)
2. Front turn signal light (page 6-28)
3. Auxiliary light bulb (page 6-29)
4. Headlight (page 6-27)
5. Centerstand (page 6-22)
2-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU10401
DESCRIPTION
EAU10430
2 2 3 4
4 1 5
6
5
7
7
9
1. Rear brake lever (page 3-6)
2. Left handlebar switches (page 3-5)
3. Speedometer (page 3-3)
4. Multi-function display (page 3-3)
5. Front brake lever (page 3-6)
6. Right handlebar switch (page 3-5)
7. Main switch (page 3-1)
2-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
3-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
SELECT
2
3
ZAUM00**
1
1. Turn. ZAUM00**
ZAUM00**
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
4 5
1 3 4
on, have a Yamaha dealer check the 1. Speedometer
electrical circuit.
The speedometer shows the riding RESET
5
speed.
When the key is turned to “ON”, the SELECT
3-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
3-5
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
EAU12721
7
Start switch “,”
With the sidestand up, push this
8 switch while applying the front or rear
brake to crank the engine with the
9 starter. See page 5-1 for starting in-
structions prior to starting the engine.
3-6
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
3-7
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
3-8
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
3-9
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
WARNING
6
● Do not exceed the load limit of
1.5 kg (3.3 lb) for the front stor-
7
age compartment.
● Do not exceed the maximum
8
ZAUM00**
load of 157 kg (346 lb) for the
vehicle.
9 TIP
Do not push inward when turning the
key from “OFF” to “OPEN” or from
“LOCK” to “OPEN”.
3-10
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
1. Sidestand 4
The rear storage compartment is EWAT1051
located under the seat. (See page WARNING The sidestand is located on the left
side of the frame. Raise the sidestand 5
3-10.) ● Do not exceed the load limit of
or lower it with your foot while holding
5 kg (11 lb) for the rear storage
ECAT1030 the vehicle upright. 6
NOTICE compartment.
● Do not exceed the maximum
Keep the following points in mind load of 157 kg (346 lb) for the TIP 7
when using the rear storage com- The built-in sidestand switch is part
vehicle.
partment.
of the ignition circuit cut-off system,
● Since the rear storage com- 8
which cuts the ignition in certain situa-
partment accumulates heat
tions. (See page 3-12 for an explana-
when exposed to the sun, do 9
tion of the ignition circuit cut-off sys-
not store anything susceptible
tem.)
to heat inside it.
● To avoid humidity from spread-
ing through the rear storage
3-11
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1044E
9 WARNING
● The vehicle must be placed on
the centerstand during this in-
spection.
● If a malfunction is noted, have
3-12
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15582
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the in-
spection and maintenance procedures and schedules described in the Owner’s Manual.
EWA11151
WARNING
1
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment dam-
age. Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures pro-
vided in this manual, have the vehicle inspected by a Yamaha dealer. 2
4-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15582
4-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15582
4-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15943
5-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15943
TIP WARNING
● Avoid braking hard or sud- 1
Before starting off, allow the engine to
denly (especially when leaning
warm up. (b)
over to one side), otherwise the 2
scooter may skid or overturn.
1. While pulling the rear brake lever
● Railroad crossings, streetcar
with your left hand and holding 3
rails, iron plates on road con-
the grab bar with your right hand,
(a) struction sites, and manhole
push the scooter off the center-
covers become extremely slip- 4
stand.
The speed can be adjusted by open- pery when wet. Therefore, slow
2. Sit astride the seat, and then ad-
ing and closing the throttle. To in- down when approaching such
just the rear view mirrors. 5
crease the speed, turn the throttle grip areas and cross them with cau-
3. Switch the turn signals on.
in direction (a). To reduce the speed, tion.
4. Check for oncoming traffi c, and 6
● Keep in mind that braking on
then slowly turn the throttle grip turn the throttle grip in direction (b).
a wet road is much more diffi -
(on the right) in order to take off.
cult. 7
5. Switch the turn signals off.
● Ride slowly down a hill, as
braking downhill can be very
8
difficult.
5-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15943
5-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU15943
Parking
When parking, stop the engine, and
then remove the key from the main
switch. 1
EWA10311
WARNING
2
● Since the engine and exhaust
system can become very hot,
park in a place where pedestri- 3
ans or children are not likely to
touch them and be burned. 4
● Do not park on a slope or on
soft ground, otherwise the ve-
5
hicle may overturn, increasing
the risk of a fuel leak and fire.
● Do not park near grass or other 6
fl ammable materials which
might catch fire. 7
5-4
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
1 2
3
ZAUM00**
TIP
If you do not have the tools or expe-
rience required for a particular job,
6-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
TIP
● The annual checks must be performed every year, except if a kilometer-based maintenance, or for the UK, a
mileage-based maintenance, is performed instead.
1 ● From 30000 km (17500 mi), repeat the maintenance intervals starting from 6000 km (3500 mi).
● Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and
2 technical skills.
EAU46920
3
Periodic maintenance chart for the emission control system
ODOMETER READING
4 ANNUAL
NO. ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK
(600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi)
5 1 * Fuel line • Check fuel hoses for cracks or damage. √ √ √ √ √
• Check
√ √
6 2 Spark plug • Clean and regap.
• Replace. √ √
• Check valve clearance.
7 3 * Valves √ √ √ √
• Adjust.
4 * Fuel injection • Check engine idele speed. √ √ √ √ √ √
8 • Check the air cut-off valve, reed valve, and hose for
5 * Air induction system damage. √ √ √ √ √
• Replace any damaged parts if necessary.
9
6-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-4
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-5
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
TIP
● Air filter and V-belt filter
• This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with
compressed air to avoid damaging it. 1
• The air filter element needs to be replaced and V-belt filter needs to be serviced more frequently when riding in
unusually wet or dusty areas. 2
● Hydraulic brake service
• After disassembling the brake master cylinder and caliper, always change the fluid. Regularly check the brake
3
fluid level and fill the reservoir as required.
• Every two years replace the internal components of the brake master cylinder and caliper, and change the brake
fluid. 4
• Replace the brake hose every four years and if cracked or damaged.
5
6-6
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
ZAUM00**
5 1. Panel B
1. Panel A 2. Screw
2. Screw
6 3 To install the panel
ZAUM00** To install the panel
Place the panel in the original posi-
1. Panel A Place the panel in the original posi-
2. Panel B tion, and then install the screws.
7 tion, and then install the screws.
3. Panel C
4. Panel D
8
6-7
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-8
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-9
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
cedures.) 5
1. Maximum level mark
2. Minimum level mark
To check the engine oil level
1. Place the vehicle on the center- 4. If the engine oil is below the mini- 6
1
stand. A slight tilt to the side can mum level mark, add sufficient oil
result in a false reading. of the recommended type to raise 7
2. Start the engine, warm it up for it to the correct level. ZAUM00**
several minutes, and then turn it 5. Insert the dipstick into the oil filler 1. Oil filler cap 8
off. hole, and then tighten the oil filler
3. Wait a few minutes until the oil cap.
settles, remove the oil filler cap, 9
wipe the dipstick clean, insert it To change the engine oil and clean
back into the oil filler hole (without the oil strainer
screwing it in), and then remove it 1. Start the engine, warm it up for
again to check the oil level. several minutes, and then turn it
6-10
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-11
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
3
maintenance and lubrication chart. 1. Final transmission oil filler cap 1. Final transmission oil drain bolt
1. Start the engine, warm up the fi-
nal transmission oil by riding the 4. Remove the final transmission oil 6. Install the fi nal transmission oil 4
scooter for several minutes, and fi ller cap and its O-ring from the drain bolt and its new gasket, and
then stop the engine. final transmission case. then tighten the bolt to the speci-
5
2. Place the scooter on the center- 5. Remove the final transmission oil fied torque.
stand. drain bolt and its gasket to drain
3. Place an oil pan under the fi nal the oil from the final transmission Tightening torque: 6
case. Final transmission oil drain bolt:
transmission case to collect the 23 Nm (2.3 m·kgf, 16.6 ft·lbf)
used oil. 7
7. Refill with the specified amount of
the recommended final transmis- 8
sion oil. WARNING! Make sure
that no foreign material enters
9
the fi nal transmission case.
Make sure that no oil gets on
the tire or wheel.[EWA11311]
6-12
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
5 Replacing the air filter element 3. Pull the air filter element out.
1. Place the scooter on the center- 4. Insert a new air filter element into
stand. the air filter case. NOTICE: Make
6
sure that the air fi lter element
is properly seated in the air
7
fi lter case. The engine should
never be operated without
8 the air filter element installed,
otherwise the piston(s) and/or
9 cylinder(s) may become exces-
sively worn.[ECA10481]
5. Install the air filter case cover by
installing the screws.
6-13
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
1 8
ZAUM00**
6-14
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-15
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-16
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
Checking the brake lever free Adjusting the rear brake lever
play free play
There should be no free play at the
brake lever end. If there is free play, 1 1
have a Yamaha dealer inspect the (b)
brake system. 2
1
EWA14211
ZAUM00**
(a)
WARNING 3
1. Adjusting nut
A soft or spongy feeling in the EWA10650
brake lever can indicate the pres- ZAUM00** 4
WARNING
ence of air in the hydraulic system. 1. Rear brake lever free play
If there is air in the hydraulic sys- If proper adjustment cannot be ob-
tained as described, have a Yama- 5
tem, have a Yamaha dealer bleed The brake lever free play should mea-
the system before operating the sure 10 ~ 20 mm (0.039 ~ 0.079 in) as ha dealer make this adjustment.
vehicle. Air in the hydraulic system shown. Periodically check the brake 6
will diminish the braking perfor- lever free play and, if necessary, ad-
mance, which may result in loss of just it as follows.
control and an accident. 7
To increase the brake lever free play,
turn the adjusting nut at the brake
shoe plate in direction (a). To de- 8
crease the brake lever free play, turn
the adjusting nut in direction (b). 9
6-18
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
The front brake pads and the rear Rear brake shoes 1
1 brake shoes must be checked for
wear at the intervals specifi ed in the
2 periodic maintenance and lubrication
chart.
EAU22420
3 Front brake pads
1 2
ZAUM00**
6-19
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-20
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
Checking and lubricating the Checking and lubricating the Lubricating the front and rear
cables throttle grip and cable brake levers
The operation of all control cables The operation of the throttle grip
1 and the condition of the cables should should be checked before each ride.
be checked before each ride, and In addition, the cable should be lubri-
2 the cables and cable ends should be cated by a Yamaha dealer at the inter-
lubricated if necessary. If a cable is vals specified in the periodic mainte-
damaged or does not move smoothly, nance chart.
3
have a Yamaha dealer check or re- The throttle cable is equipped with a
place it. rubber cover. Make sure that the cov-
4 WARNING! Damage to the outer er is securely installed. Even though ZAUM00**
6-21
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
ZAUM00** 4
The operation of the centerstand and
sidestand should be checked before 5
each ride, and the pivots and metal-
to-metal contact surfaces should be
6
lubricated if necessary.
EWA10741
WARNING 7
If the centerstand or sidestand
does not move up and down 8
smoothly, have a Yamaha dealer
check or repair it. Otherwise, the
centerstand or sidestand could 9
contact the ground and distract the
operator, resulting in a possible
loss of control.
6-22
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-23
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
1. Battery 4
TIP 8
EWA10760
WARNING
● Electrolyte is poisonous and
6-24
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
• EYES: Flush with water for required. Using a conventional bat- NOTICE
5
15 minutes and seek prompt tery charger will damage the bat- ● Always keep the battery
tery. If you do not have access to a
medical attention. charged. Storing a discharged
6 constant-voltage battery charger,
● Batteries produce explosive battery can cause permanent
have a Yamaha dealer charge your
hydrogen gas. Therefore, keep battery. battery damage.
7 sparks, flames, cigarettes, etc., ● After installing the battery, be
away from the battery and pro- To store the battery sure to turn the main switch
8 vide sufficient ventilation when 1. If the vehicle will not be used for from “ON” to “OFF” three
charging it in an enclosed more than one month, remove times in 3 seconds intervals to
space. the battery, fully charge it, and initialize the idle speed control
9 ● KEEP THIS AND ALL BATTER- system.
then place it in a cool, dry place.
IES OUT OF THE REACH OF NOTICE: When removing the
CHILDREN. battery, be sure the key is
turned to “OFF”, then discon-
nect the negative lead before
6-25
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
3 Specified fuses: 2
1 4 6 Main fuse:
5 20 A
ZAUM00**
Headlight fuse: 3
1. Lid 15 A
2. Backup fuse
3. Ignition fuse
Signaling system fuse:
15 A 4
4. Signaling system fuse
ZAUM00**
5. Taillight fuse Ignition fuse:
1. Main fuse 6. Headlight fuse 7.5 A
Backup fuse: 5
The fuse box, which contains the fus- If a fuse is blown, replace it as follows. 7.5 A
es for the individual circuits, is located 1. Turn the key to “OFF” and turn off Taillight fuse:
6
the electrical circuit in question. 7.5 A
in the storage compartment. (See
page 3-10.) 2. Remove the blown fuse, and then
3. Turn the key to “ON” and turn on 7
install a new fuse of the specified
amperage. WARNING! Do not the electrical circuit in question to
use a fuse of a higher amper- check if the device operates. 8
age rating than recommended 4. If the fuse immediately blows
to avoid causing extensive again, have a Yamaha dealer
check the electrical system. 9
damage to the electrical sys-
tem and possibly a fi re. [EWA15131]
NOTICE: After removing and
installing the main fuse, be
6-26
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
1. Bulb cover
6. Install the headlight bulb cover,
bulb, and the bulb life will be ad- and then connect the coupler.
6
versely affected. Thoroughly clean
4. Unhook the headlight bulb holder, 7. Install the panel.
off any dirt and fingerprints on the
headlight bulb using a cloth moist- and then remove the burnt-out 8. Have a Yamaha dealer adjust the
7 ened with alcohol or thinner. bulb. headlight beam if necessary.
● Headlight lens
8
• D o n o t a f fi x a n y t y p e o f
tinted fi lm or stickers to the
headlight lens.
9 • Do not use a headlight bulb
of a wattage higher than
specified.
6-27
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-28
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
6-30
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU1722A
Troubleshooting chart
1
1. Fuel
There is enough fuel. Check the compression.
2 Check the fuel level in
the fuel tank.
The engine does not start.
There is no fuel. Supply fuel.
Check the compression.
3
2. Compression
4 There is compression. Check the ignition.
Operate the electric starter.
Have a Yamaha dealer
There is no compression.
5 check the vehicle.
8
4. Battery The engine turns over
The battery is good.
quickly. The engine does not start.
9 Operate the electric starter. Have a Yamaha dealer
The engine turns over Check the battery lead connections, check the vehicle.
slowly. and charge the battery if necessary.
6-31
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU25991
7-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU25991
7-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU25991
7-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU25991
7-4
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU25991
7-5
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
SPECIFICATIONS
EAU50910 Engine oil Fuel tank capacity
Dimensions Recommended brand 7.4 L (1.96 US gal, 1.63 Imp.gal)
Overall length YAMALUBE Throttle body
1855 mm (73.0 in) Type ID mark
Overall width SAE 10W-30, 10W-40, 10W-50, 15W-40, 4P91 00
1
685 mm (27.0 in) 20W-40 or 20W-50 Manufacturer
Overall height 0 10 30 50 70 90 110 130 ˚F MIKUNI
2 1130 mm (44.5 in) Spark plug(s)
SAE 10W-30
Seat height Manufacturer/model
785 mm (30.9 in) SAE 10W-40 NGK/CR7E
3 Wheelbase SAE 10W-50 Spark plug gap
1295 mm (51.0 in) SAE 15W-40 0.7-0.8 mm (0.028-0.031 in)
Ground clearance Clutch
4 113 mm (4.45 in) SAE 20W-40
Clutch type
Minimum turning radius SAE 20W-50 Dry, centrifugal automatic
1900 mm (74.8 in) –20 –10 0 10 20 30 40 50 ˚C Transmission
5 Weight Recommended engine oil grade Primary reduction ratio
Curb weight API service SG type or higher, JASO 1.000
120 kg (265 lb) standard MA Secondary reduction ratio
6
Engine Engine oil quantity 9.744 (38/13 × 40/12)
Engine type Periodic oil change Final drive
7 Air cooled 4-stroke, SOHC 0.90 L (0.95 US qt, 0.79 Imp.qt) Gear
Cylinder arrangement Transmission type
Final transmission oil
Single cylinder V-belt automatic
Type
8 Displacement Chassis
SAE 10W-30 type SE motor oil
125 cm3 Frame type
Quantity
Bore x stroke Backbone
0.11 L (0.12 US qt, 0.10 Imp.qt)
9 52.4 x 57.9 mm (2.06 x 2.28 in) Caster angle
Compression ratio
Air filter
Air filter element 27.00 degree
10.00 :1 Trail
Wet element
Starting system 90 mm (3.5 in)
Electric starter and kickstarter Fuel
Recommended fuel Front tire
Lubrication system
Regular unleaded gasoline only Type
Wet sump Tubeless
8-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
SPECIFICATIONS
Size Rear wheel Charging system
110/70-12 47L Wheel type AC magneto
Manufacturer/model Cast wheel Battery
CHENG SHIN / C-992N Rim size Model
Rear tire J12 X MT3.00 MF (YT7B-BS)
1
Type Front brake Voltage, capacity
Tubeless Type 12 V, 6.5 Ah
Size Single disc brake Headlight 2
120/70-12 58L Operation Bulb type
Manufacturer/model Right hand operation Halogen bulb
CHENG SHIN / C-6007 Recommended fluid Bulb voltage, wattage x quantity 3
Loading DOT 4 Headlight
Maximum load Rear brake 12 V, 60 W/55 W x 1
157 kg (346 lb) Type Tail/brake light 4
Tire air pressure (measured on cold Drum brake 12 V, 5.0 W/21.0 W x 1
tires) Operation Front turn signal light
Left hand operation 12 V, 10.0 W x 2 5
Loading condition
0-90 kg (0-198 lb) Front suspension Rear turn signal light
Front Type 12 V, 10.0 W x 2
6
175 kPa (1.75 kgf/cm2, 25 psi, 1.75 bar) Telescopic fork Auxiliary light
Rear Spring/shock absorber type 12 V, 5.0 W x 2
200 kPa (2.00 kgf/cm2, 29 psi, 2.00 bar) Coil spring/oil damper Meter lighting 7
Loading condition Wheel travel LED x 2
90 kg - maximum load 78.0 mm (3.07 in) High beam indicator light
Front Rear suspension LED x 1 8
200 kPa (2.00 kgf/cm2, 29 psi, 2.00 bar) Type Turn signal indicator light
Rear Unit swing LED x 1
225 kPa (2.25 kgf/cm2, 33 psi, 2.25 bar) Spring/shock absorber type Fuses 9
Front wheel Coil spring/oil damper Main fuse
Wheel type Wheel travel 20.0 A
Cast wheel 95.5 mm (3.76 in) Headlight fuse
Rim size Electrical system 15.0 A
J12 X MT2.75 Ignition system Taillight fuse
TCI 7.5 A
8-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
SPECIFICATIONS
Signaling system fuse
15.0 A
Ignition fuse
7.5 A
Backup fuse
1
7.5 A
Spare fuse
2 20.0 A x 1
Spare fuse
7.5 A x 1
3 Spare fuse
15.0 A x 1
8-3
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
EAU26343
CONSUMER INFORMATION
EAU48611 EAU26410 EAUT1440
9-1
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
INDEX
A H Starting the engine.................................... 5-1
Acceleration and deceleration................... 5-2 Handlebar switches................................... 3-5 Start switch ............................................... 3-6
Air filter and V-belt case air filter Headlight bulb, replacing ........................ 6-27 Steering, checking .................................. 6-23
elements ............................................... 6-13 High beam indicator light .......................... 3-2 Storage ..................................................... 7-4
Auxiliary light bulb, replacing .................. 6-29 Horn switch ............................................... 3-6 Storage compartments............................ 3-10
B I T
Battery..................................................... 6-24 Identification numbers............................... 9-1 Tail/brake light bulb or rear turn signal light
Brake fluid, changing .............................. 6-20 Ignition circuit cut-off system................... 3-12 bulb, replacing ...................................... 6-28
Brake fluid level, checking ...................... 6-19 Indicator and warning lights ...................... 3-2 Throttle grip and cable, checking and
Brake lever, front....................................... 3-6 K lubricating ............................................. 6-21
Brake lever, rear ....................................... 3-6 Keyhole cover ........................................... 3-2 Throttle grip free play, checking.............. 6-15
Brake levers, lubricating.......................... 6-21 Kickstarter ................................................. 3-9 Tires ........................................................ 6-16
Brake lever free play, checking............... 6-18 M Tool kit ...................................................... 6-2
Brake pads and shoes, checking ............ 6-19 Maintenance, emission control system ..... 6-3 Troubleshooting ...................................... 6-29
Braking...................................................... 5-2 Maintenance and lubrication, periodic ...... 6-4 Troubleshooting chart ............................. 6-31
C Main switch/steering lock .......................... 3-1 Turn signal indicator light .......................... 3-2
Cables, checking and lubricating ............ 6-21 Matte color, caution................................... 7-1 Turn signal light bulb (front), replacing.... 6-28
Care .......................................................... 7-1 Model label................................................ 9-1 Turn signal switch ..................................... 3-6
Catalytic converters .................................. 3-9 Multi-function display ................................ 3-3 V
Centerstand and sidestand, checking and P Valve clearance ...................................... 6-15
lubricating ............................................. 6-22 Panels, removing and installing ................ 6-7 Vehicle identification number .................... 9-1
D Parking...................................................... 5-4 W
Dimmer switch .......................................... 3-6 Part locations ............................................ 2-1 Wheels .................................................... 6-17
E R Wheel bearings, checking....................... 6-24
Engine break-in......................................... 5-3 Rear brake lever free play, adjusting ...... 6-18
Engine oil and oil strainer........................ 6-10 S
Engine trouble warning light...................... 3-2 Safe-riding points ...................................... 1-5
F Safety information ..................................... 1-1
Final transmission oil .............................. 6-12 Seat......................................................... 3-10
Front fork, checking ................................ 6-23 Sidestand ................................................ 3-11
Fuel ........................................................... 3-7 Spark plug, checking................................. 6-8
Fuel consumption, tips for reducing .......... 5-3 Specifications............................................ 8-1
Fuel tank cap ............................................ 3-7 Speedometer ............................................ 3-3
Fuses, replacing...................................... 6-26 Starting off................................................. 5-2
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
INDEX
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
INDEX
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
INDEX
2('KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠࡊࡠࠬࡉ࠶ࠢ
YAMAHA MOTOR TAIWAN CO., LTD
PRINTED IN TAIWAN
2010.10-0.8 × 1 !
(E)
2('KPFF