Professional Documents
Culture Documents
ROCA-Inst_W12
ROCA-Inst_W12
Installation Instructions
Before installation please read these instructions.
■ 2 Speed, self-parking
■ Torque 12Nm
■ Wiper shaft in stainless steel
■ Adjustable sweep angle: 45 - 110°
■ Changeable self-parking, right and left position.
■ Insulated ground.
■ EMC protected
■ IP65
■ Powers up to 610mm/560mm - Arm/blade combinations
150528
www.rocaindustry.com
Mounting instructions W12 - wiper motor
(Keep battery main switch turned off during operation inside of the wiper motor)
Note: If the arm sweeps too far out on both sides, the sweep angle needs to be reduced,
repeat point 5 above. If the arm goes too far on one side only then you didn't start with
the arm in center of the sweep. Remove the arm and place it at the correct position.
1
Alternative fastening.
5
6 - 17
c/c 145
rm
2 er a
Wip
22,5°
3a 3b 3c
22,5°
22
,5
°
Instructionsheet
F (Red) S (Green)
G (Brown) P (Black)
4 5
End
position
Parking selector
Fuse
F S P
+ - + -
Switch circuit
Battery Battery
466099
Actuator 466026
P = Parking (Black)
S = Slow (Green)
F S P F = Fast (Red)
G = Ground (Brown)
Switch
6a 6b
13,8
27
Ø13,8 / z=72
100
c/c 145 L1
170 59 L2
Accessories
Wiper arm - Std
Wiper blade
Wiper control