Professional Documents
Culture Documents
UTCE
UTCE
UTCE
Material
W e certify that this material is a true and exact copy of the certified material test report supplied by the
material manufacturer. In addition, the material supplied against this order complies with all purchase
order requirements and is supplied in accordance with S wiss S teel US A Inc. Quality Manual, QMS -001
R evision 9, Dated 08/02/2018 as approved to NC A-3800.
W e also hereby certify that the as delivered condition of the material is free from mercury contamination.
________________________
S wiss S teel US A Inc. ( R eviewer )
H.C.T. UTCE
d by
Checked & Approve
Parker Hannifin IPDE
09-07-2021 14:44:23 Page 1 of 3
Manufacturer
UGIT ECH IT A LIA S .r.l
V ia G. Di V ittorio, 34/36 INS PECT ION CERT IFICA T E 3.1
20068 Peschiera Borromeo NF L 00-015 C ertified material test report
Italy
w w w .ugitech.com
Certificate : S upplier's mark :
A ll UGIT ECH products w ere produced according to the certified
quality system (at least IS O 9001) and according to customer
requests on purchase orders, as per requirements in standards
IS O/TS 16949, EN 9100/EN9120, IS O 13485, code RCC M Inspector' s stamp :
and/or A S ME section III, PED 2014/68/EU, A D2000 W 0.
S tandard :
A S ME S A 484/484M-15 S ec.IIPartA
S tandard :
A S ME S A 479/479M-17 S ec.IIPartA TY PE 316L
Customer' s specification : S pecification issue S pecification A cceptation Deviation
No revision date date
ES 2020/ S S -60 REV . K
CHEMICA L A NA LY S IS Test n° : LW1E
% C Si Mn Ni Cr Mo Cu S P N Co
Min 10,000 16,000 2,0000 0,0150
Max 0,0300 1,0000 2,0000 14,000 18,000 3,0000 1,0000 0,0300 0,0450 0,1000
Heat 0,0210 0,4040 1,3590 10,109 16,575 2,0410 0,4860 0,0292 0,0283 0,0400 0,2430
Product
MEC HA NICA L CHA RA CT ERIS T ICS
Result as delivered : W ork hardened
T ensile test Hardness
T est N° T °C Marker n° T ype Y ield strengthY ield strength T ensile Elongation Elongation Red. A rea HBW HRc
Direction Rp 0,2% Rp 1% strength RM 5D 4D Z 2,5/187,5
° F/°C ksi/MPa ksi/MPa ksi/MPa % % % A ve A ve
Min 80 /552 100 /690 25 40 200
Max 32
__ ___ ______ _ __ ____ __ ____ ___ ______ __ __ ______ __ ______ __ ____ ___ ______ ___ __ ______ ______ ____ _ __ __ __ _____
LW1E 68 /20 1 L 97 /668 112 /774 30 68 278 26
A DDIT IONA L INFORMA T ION
Non destructive testing :
CHECKING OF S URFA CE DEFECT S ENS URED BY EDDY CURRENT 100% OF T HE BA RS
Others :
PA RKER HA NNIFIN ES 2020/ S S -60 REV . K / A S TM A 484-16
A IS I/316/316L/UNS S 31600/31603/MA T ERIA L IS COLD DRA W N/MA TERIA L IS S OLUT ION A NNEA LED.
ELONGA T ION BA S IS = 4D/A S T M A 370-17 T ENS ILE S PEC IMEN/A S T M A 262-15 PRA CT IC E E A CC EPT A BLE
FREE FROM W ELDS & WELD REPA IRS /MERC URY CONT A MINA T ION/CONT INUOUS CA RBIDE NET WORK.
PRIOR T O C OLD DRA W ING,T HIS MA T ERIA L W A S A T TEMPERA T URE FOR A S UFFICIENT PERIOD OF TIME Trace code:UTCE
TO S TA BILIZE A T A MINIMUM OF 1950°F PRIOR T O W A T ER QUENC HING. page 2 of 3
QUA LITY MA NUA L ED. 5 REV . 01 OF 22-J A N-09
PROV IS ION OF 10 C FR PA RT 21 & 10 CFR PA RT 50 A PP.B A PPLY
S IZE (INC H) : HEX 1,0625
COUNT RY OF MELT S OURCE : FRA NC E
THE C ONT ENTS OF T HE REPORT A RE A C CURA TE A ND A ND A LL TES T RES ULT S A ND OPERA T IONS
PERFORMED BY UGIT ECH A RE IN C OMPLIA NCE W IT H THE MA T ERIA L S PECIFIC A TION.
S S S QR-UGIT ECH REV IS ION 5
H.C.T. UTCE
d by
Checked & Approve
T he contents of the report are accurate and all test results and
operations performed by UGIT ECH or its subcontractors are in compliance
UGITECH ITA LIA S .r.l the 25.03.2021
The quality manager
S tandard :
EN 10088-1/3 ED2014 1.4404/1.4401 A IS I 316L/316
CHEMICA L A NA LY S IS Test n° : LS 9W
% C Si Mn Ni Cr Mo Cu S P N Ti Co
Min 10,000 16,500 2,0000
Max 0,0300 0,7500 2,0000 13,000 18,000 2,5000 0,0300 0,0450 0,1000
Heat 0,0210 0,4040 1,3590 10,109 16,575 2,0410 0,4860 0,0292 0,0283 0,0400 0,0010 0,2430
Product
% Al B Zr
Min
Max
Heat 0,0060 0,0018 0,0020
Product
MEC HA NICA L CHA RA CT ERIS T ICS
Result as delivered : solution annealed
T ensile test Hardness
T est N° T °C Marker n° T ype Y ield strengthY ield strength T ensile Elongation Elongation Red. A rea
Direction Rp 0,2% Rp 1% strength RM 5D 4D Z
°C MPa MPa MPa % % %
Min
Max
__ ___ ______ _ __ ____ __ ____ ___ ______ __ __ ______ __ ______ __ ____ ___ ______ ___ __ ______ ______ ____ _ __ __ __ _____
LS 9W 20 1201 L 249 302 575 51 53 74
A DDIT IONA L INFORMA T ION
Corrosion :
INT ERC RY S T A LLINE CORROS ION RES IS TA NT A CC .T O IS O 3651-2-1998 PRA C T ICE A
INT ERC RY S T A LLINE CORROS ION RES IS TA NC E A CC ORDING TO A S T M A 262-2015 PRA C T ICE E : CONFORM
Non destructive testing :
PROCEDURE A ND A NT IMIX ING TES T PERFORMED BY S PECT ROS COPIC MET HOD : CONFORM
Others :
A S T MA 479-A 479M 17/A S MES A -479 ED .15 S ECT .II 2010 NO A DD./QQ-S -763F/A MS QQ-S -763A /A S T MA 276 17
FREE FROM CONTINUOUS CA RBIDE NETW ORK
MA T ERIA L FREE FROM W ELDS OR W ELD REPA IRS A T TIME OF S HIPMENT
MA T ERIA L IS FREE FROM MERCURY A ND RA DIOA C T IV E C ONT A MINA T ION A ND WELDS OR W ELD REPA IRS A T T IME OF S HIPMENT
QUA LITY MA NUA L REV .K OF 03/04/2018
PROV IS ION OF 10 C FR PA RT 21 & 10 CFR PA RT 50 A PP.B A PPLY
COUNT RY OF MELT = FRA NCE
H.C.T. UTCE
Trace code:UTCE
page 3 of 3
T he contents of the report are accurate and all test results and
d by
Checked & Approve Ugine the 20.01.2021
operations performed by UGIT ECH or its subcontractors are in compliance The quality manager