Professional Documents
Culture Documents
3m 6000 Series Half Mask Fitting Instructions
3m 6000 Series Half Mask Fitting Instructions
3m 6000 Series Half Mask Fitting Instructions
4. Tighten bottom straps using either front or rear adjustments. Fit Testing
CH6000HMFP ISS1
The 3M 6000 Half Mask is a tight fitting facepiece and therefore wearers require a fit test
(Strap tension may be decreased by pushing out on back side as per the COSHH regulations 2002.
Occupational Health & of buckles). For qualitative fit testing - 3M FT10 or FT30 fit test kits are available.
Environmental Safety Group Occupational Health &
3M United Kingdom PLC Environmental Safety Group For quantitative fit testing - the 3M 601 adaptor is available.
3M Centre 3M Ireland 5. Perform a positive and/or negative pressure fit check. The positive
Cain Road, Bracknell 3M House, Adelphi Centre
method is recommended.
Berkshire RG12 8HT
Helpline: 0870 60 800 60
www.3M.com/uk/ohes
Upper Georges St. Dun Laoghaire
Co. Dublin, Ireland
Helpline: 1 800 320 500
Please recycle.
Printed in the United Kingdom.
© 3M 2008. All rights reserved. 3