Project Ms. TRIVIKRAM CONSTRUCTION AND DEVELOPERS,
Boiler. 1 X 20 TPH TRAVELLING GRATE BOILER
01. MINERAL INSULATED THERMOCOUPLE ASSEMBLY (For Fluegas)
2 x K CR/AL, Mineral insulated, 6 mm OD, SS316 sheathed, ungrounded Element junction, duplex Calibration As per ANSI MC-96.1 Insulation Compact mass of MgO - 14 AWG Terminated into a ceramic terminal block with SS base plate and Ni plated brass Terminal block terminals, 41mm OD, 13mm THK, having 2M4 spring loaded screws on 33 PCD for mounting the terminal block inside the head. Die-cast aluminium weatherproof to IP65/IS2147 painted black and stoved Head provided with 2 nos. 1/2" NPT(F) cable entry with cable gland Cable gland Double compression, brass nickel plated Head assembly Head-protecting tube Protecting tube 12mm OD in SS316 Adjustable flange 3/4" BS10 Table-D in CS (PCD should be 70mm) 4 Holes Connection adjustable gland 1/2" NPT(M) in SS Overall length 500 mm below head Temp. range of inner sheath material 0 to 1200 deg. C Quantity 750 mm - 8 Nos.+ 1 Nos. Spare Make PYROTECH / WIKA / MASSIBUS / GIC / DET / GOA
02. MINERAL INSULATED THERMOCOUPLE ASSEMBLY (For Water & Steam)
2 x K CR/AL, Mineral insulated, 6 mm OD, SS316 sheathed, ungrounded Element junction, duplex Calibration As per ANSI MC-96.1 Insulation Compact mass of MgO - 14 AWG Terminated into a ceramic terminal block with SS base plate and Ni plated brass terminals, 41mm OD, 13mm THK, having 2M4 spring loaded screws on 33 PCD Terminal block for mounting the terminal block inside the head. Die-cast aluminium weatherproof to IP65/IS2147 painted black and stoved Head provided with 2 nos. 1/2" NPT(F) cable entry with cable gland Cable gland Double compression, brass nickel plated Head assembly Head-insert only Protecting tube Not required
Connection 1/2" NPT(M) Adjustable gland in SS
Overall length Length in mm below head as given in quantity column.
Temp. range of inner sheath material 0 to 1200 Deg. C
Quantity 300 mm - 10 Nos + 1 Nos. Spare.
Make GIC / PYRO TECH / WIKA
THE FOLLOWING DOCUMENTS SHALL BE SUBMITTED BY SUPPLIER
01. 6 copies of O & M manual 02. Calibration test certificate 03. Guarantee certificate