Professional Documents
Culture Documents
GT31
GT31
20
Highest mechanical
frequency to 25 Hz
ø2
17
20 ± 0,5°C
5 °C to 60 °C
(90)
80% 40 50
IP40
(IEC 60529) 8,54
6,4 ø1
Equipped with ,5
1,65
a 2 mm dia.
probe insert
(No. 03260410) plus L
a 8 mm dia. fixing shaft
No. 01840105.
Shipping
packaging
mm µm µm µm* Technical
Identification data sheet
number
GT 31 0,7 0,1 0,25 0,2 + 50 · L2 03200266
Declaration * Linearity related max permissible error (L in mm).
of conformity
B Measuring direction
Measuring direction
A
Shorten lever
Note
With the insert lying parallel to the workpiece surface (Fig. A), the leverage matches
1:1. Therefore, no correction of the measured values is needed.
Any other position (angle α, Fig. B) will change the effective lever length, so that read
values must be corrected. With regard to this, also report to the instructions for use
that came with your electronic probes.
O-29