Professional Documents
Culture Documents
C16-EE-107062019
C16-EE-107062019
C16–EE/CHPP– 107
6038
BOARD DIPLOMA EXAMINATION, (C–16)
JUNE—2019
DEEE—FIRST YEAR EXAMINATION
ENGINEERING DRAWING
PART—A 5×4=20
Instructions : (1) Answer all questions.
(2) Each question carries five marks.
(3) All dimensions are in mm.
/6038 1 [ Contd....
www.manaresults.co.in
*
4. Draw the auxiliary view of the inclineded surface of the object
given below :
PART—B 10×4=40
Instructions : (1) Answer any four questions.
(2) Each question carries ten marks.
(3) All dimensions are in mm.
7. Draw the front view, top view and right side view of the block
shown in the figure below in first angle projection :
*
/6038 2 [ Contd....
www.manaresults.co.in
*
8. A cylinder of base diameter 40 mm and height 60 mm rests on
its base on HP. A plane perpendicular to VP and inlined at 30°
to HP cuts its through a point 30 mm from base on the axis. Draw
the front view, top view and true shape of the section.
***
*
/6038 3 AA9—PDF
www.manaresults.co.in