Professional Documents
Culture Documents
M15F-Series-WEB_Sesto_Ball_valves_FPD
M15F-Series-WEB_Sesto_Ball_valves_FPD
CLASS 150
8 M15F
8
- 03 7
7
- C 66 6 0 F5 5 - L 4-
4
6 - 316 SS BALL / 316 SS STEM 0 - STANDARD F - TFM 1600 S - 50/50 L - LOCKING LEVER CONSULT
7 - 316 SS BALL 6
/ 17-4PH STEM V - V-PORT BALL
5 C - CTFE 4 M - MTFE N - BARE
3 STEM FACTORY 2
8 - 304 SS BALL / 304 SS STEM P - OPEN PORT BALL R - RTFE T - PTFE 9 - SPECIAL
9 - SPECIAL S - SLOTTED BALL G -TFM4215 9 - SPECIAL - -
R - RELIEF VENTED BALL
T - TEFLON IMPREGNATED BALL
9 - SPECIAL
JJ
K
K
ISO 5211
NxH
NxH
S CC
P
P
R
B
R
B
TT BORE
LL BORE
DimensionsJ Torques
K
1” 0.98 0.43 0.55 0.57 5.00 2.34 0.44 2.00 3.12 4.25 0.62 4 F04-F05 68 5.8 123 123 123 184 197
1 1/4’’ 1.26 0.43 0.55 0.57 5.51 2.83 0.50 2.50 3.50 4.63 0.63 4 F04-F05 110 8 170 170 170 255 272
R
B
1 1/2’’ 1.57 0.55 0.75 0.73 6.50 2.68 0.56 2.88 3.88 5.00 0.62 4 F05-F07 155 11.8 277 277 277 416 443 M15F
M15F#15
#1
2” 1.97 0.55 0.75 0.73 7.00 3.35 0.62 3.62 4.75 6.00 0.75 4 F05-F07 300 18.2 350 350 350 525 560 DIMENSION
DIMENSIO
DRAWING NO.
DRAWING NO.
M15F
2 1/2’’ 2.56 0.67 0.87 0.83 7.50 4.09 0.69 4.12 5.50 7.00 0.75 4 F07-F10 500 27.8 611 611 611 917 978
3” 2.99 0.67 0.87 0.82 8.00 4.42 0.75 5.00 6.00 7.50 0.75 4 F07-F10 600 33.8 785 785 785 1178 1256 M15
Confidential d
4” 3.94 0.87 1.10 T1.20 9.00 5.33 0.94 6.19 7.50 9.00 0.75 8 F10-F12 1015 62.4 938 938 938 1407 1501 Confidential
8 7 6 BORE 5 4 3
L dimensions without7 any notice.
Sesto8Valves may change 6 5 4
**Raw torques shown in inch-pounds.
Minimum 30% safety factor should be
added for actuator sizing.**
Why Sesto?
Sesto Engineered Design The Sesto Difference
The Sesto 2-PC Class 150 flanged ball valve is compliant to ASME B16.34. The wall thicknesses are designed thicker
Design
than industry standards. The body gaskets, seats, and stem are much larger than most competitor’s designs.
Investment cast quality body with chemical composition and hardness controlled to meet NACE standards.
Precision The sealing areas are machined to a tight tolerance of +/- .002”. This allows for lesser compression on the seat
thereby lowering torque.
The precision machining, low seat compression, and oversized stem all work together to give use a consistent
Reliable low torque design. Our Torques are monitored before each shipment to ensure repeatable, reliable perfor-
mance. Each valve is tested and serialized to ensure the highest quality.
As with all Sesto Valves the 2-pc direct mount cast ball valve is API607 Fire Tested and certified. The Stem
Certified packing design is FE tested. They are NACE and SIL certified with global approvals. The wall thickness design is
certified to meet ANSI Class 150 (285 PSI) and to meet the listed pressure marked on the valve bodies.
Globally Certified and Approved 2-PC Flanged Ball Valves
Live-Loaded
Stem Design Packing
Sesto 2-pc flanged
direct mount ball valves
are made for the heavy
demands of automation.
The stem is designed
for smooth cycling, high Low Emissions
MAST value, and made Packing
to last for millions of
cycles. We have the
largest stem design in
the industry.
Firesafe
Packing
Viton
O-Ring
Smooth, Consistent,
and Relliable Torque
Tested for Accuracy
Multiple Seats
Seats and Seals
Body Wall Thickness Available
Fit Into Center Body
Designed Above
ASME B 16.34 Requirements
SERIES: M15F
INFO@ANYTHINGFLOWS.COM
WWW.ANYTHINGFLOWS.COM
Life Flows on ™
TM
SCAN ME