Professional Documents
Culture Documents
08 - SAMA
08 - SAMA
08 - SAMA
MATERIAL DESCRIPTION
Company Name : Sama Factory Company Name: Hussein & Al-Hassan G. Shaker Bros.
ENGINEER REVIEW
Remarks :
Note : The Sub-Contractor can make a PQD submission in case of unavailibility of accepted material from the approved supplier/manufacturer.
Material Approval Request Submittal Checklist
Project: DGII Temporary Office CTO Extension (CTOE)
10
11
12
13
14
15
PMC Comments:
Reviewed By Accepted By
Name:
Designation
Signature:
Date:
List of Items Procured
AC Grills
2
SQUARE AND RECTANGULAR DIFFUSER
4
SQUARE AND RECTANGULAR DIFFUSER
6
LINEAR SLOT DIFFUSER
1
LINEAR SLOT DIFFUSER
5
LINEAR SLOT DIFFUSER
6
LINEAR SLOT DIFFUSER
7
SAND TRAP LOUVER
1
SAND TRAP LOUVER
2
SAND TRAP LOUVER
3
MATERIAL TEST CERTIFICATE
Performance Test Certificate
Issued To
STANDARDS
ISO 3741:2010 “Acoustics - Determination of Sound Power Levels and Sound Energy Levels of Noise
Sources Using Sound Pressure - Precision Methods for Reverberation Test Rooms”
SCOPE OF TESTING
The Bypass Air Terminal with model VAV (BY PASS) 8 INCH
was tested for the following performance characteristics:
"Reference Intertek Report Number 105262489CRT-001 dated November 30, 2022”
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and
liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement,
for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek
name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test
results referenced from this Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has
ever been under an Intertek certification program.
3933 US RT 11
Cortland, NY 13045
Telephone: (607) 753-6711
www.intertek.com
The model
SAMA AL TAKYEEF FACTORY CO. VAV (PRESSURE INDEPENDENT) BOX SUPPLY, 8 INCH
was tested in accordance with the standard listed below and was found
to perform in a manner appropriate to the dictates of the standard.
STANDARD
AHRI 880-17 for Air Terminals
SCOPE OF TESTING
June 8, 2023
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense
or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek name or one of its marks for
the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this
Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek
certification program.
Page 1 of 1
Performance Test Certificate
Issued To
STANDARDS
SCOPE OF TESTING
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and
liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement,
for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek
name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test
results referenced from this Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has
ever been under an Intertek certification program.
Performance Test Certificate
Issued To
The SAMA Silencer Sound Reduction Unit SA 50% - SRU - H duct silencer
was tested in accordance with the standard listed below and was found
to perform in a manner appropriate to the dictates of the standards.
STANDARD
ASTM Standard E477: 2020 “Standard Test Method for Laboratory Measurements of Acoustical and
Airflow Performance of Duct Liner Materials and Prefabricated Silencers”
SCOPE OF TESTING
The duct silencer identified as a SAMA Silencer Sound Reduction Unit SA 50% - SRU - H
was tested for the following performance characteristics:
"Reference Intertek Report Number 105104126CRT-001 dated August 16, 2022”
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and
liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement,
for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek
name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test
results referenced from this Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has
ever been under an Intertek certification program.
Performance Test Certificate
Issued To
The diffuser with model SCD NECK SIZE 18X18 INCH, FACE SIZE 60X60 CM
was tested in accordance with the standard listed below and was found
to perform in a manner appropriate to the dictates of the standard.
STANDARD
ASHRAE Standard 70-2006 “Method of Testing for Rating the Performance of Air Outlets and Inlets”
SCOPE OF TESTING
The diffuser with model SCD NECK SIZE 18X18 INCH, FACE SIZE 60X60 CM
was tested for the following performance characteristics:
"Reference Intertek Report Number 105201267CRT-001a dated October 20, 2022”
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and
liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement,
for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek
name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test
results referenced from this Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has
ever been under an Intertek certification program.
3933 US RT 11
Cortland, NY 13045
Telephone: (607) 753-6711
www.intertek.com
STANDARD
ASHRAE Standard 70-2006 “Method of Testing for Rating the Performance of Air Outlets and Inlets”
SCOPE OF TESTING
Brian Cyr
Intertek
Engineer
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense
or damage occasioned by the use of this Verification. Only the Client is authorized to copy or distribute this Verification. Any use of the Intertek name or one of its marks for
the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this
Verification are relevant only to the sample tested. This Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek
certification program.
Page 1 of 1
Performance Test Certificate
Issued To
STANDARD
ASHRAE 70-2006 Standard “Method of Testing for Rating the Performance of Air Outlets and Inlets”
SCOPE OF TESTING
James R. Kline
Intertek
Engineer / Quality Supervisor
This Verification is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's
responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in
accordance with the agreement, for any loss, expense or damage occasioned by the use of this Verification. Only the Client is authorized to copy or
distribute this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service
must first be approved in writing by Intertek. The observations and test results referenced from this Verification are relevant only to the sample tested.
This Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
SASO CERTIFICATE
AUTHORIZATION LETTER
Previous Approvals
Submittal MATERIAL SUBMITTAL Transmittal ID PROJ-1306/MECH/TRMT-10
Approval of the above does not relieve the contractor from his contractual obligations
NAME :
Contractorto select air terminals in accordance to room NC as per Ashrae standard and as -
.per design drawings TITLE :
Samples to be provided with white and black finish colors for final selection for final selection - DATE :
SIGNATURE :
Page No: 1 of 1
KINGDOM OF SAUDI ARABIA PROJECT NO: 9-2-72
MINISTRY OF DEFENSE
PROJECT
MEDICAL SERVICES DIRECTORATE CONSTRUCTION OF MSD INSTITUTE ALKHARJ - PHASE I
NAME:
ENGINEERING WORKS DEPARTMENT
Study and Planning Section SUBMITTAL NO.: MT-MECH-007A DATE: 16-08-2022
ENGINEERING REVIEW COMMENTS
ITEM DRAWING / MATERIAL
COMMENTS ACTION CODE
No. TITLE
Page 1 of 1
Projects List
THANK YOU