Professional Documents
Culture Documents
qsg-sb2920d6
qsg-sb2920d6
• Always use the accessories recommended by the manufacturer to insure compatibility. RISK OF ELECTRIC
SHOCK DO NOT OPEN
• When moving your Unit from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, Explanation of WARNING symbols:
electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Unit and to protect it from overheating, be sure these openings The lighting flash with arrowhead symbol within an equilateral triangle is intended to
are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper alert the user to the presence of not isolated dangerous voltage within the product
ventilation is provided. that may be sufficient magnitude to constitute a risk of shock to persons.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any
objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock.
• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect The exclamation point within an equilateral triangle is intended to alert the user
power, unplug the power cord. to the presence of important operating and servicing instructions in the literature
accompanying the appliance.
• Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water
penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
TABLE OF CONTENTS
Package Contents.................................................................. 4
Controls & Connections........................................................ 5
FIrst-Time Setup.................................................................... 7
Using the Remote.................................................................. 11
LED Indicators........................................................................ 12
Bluetooth Pairing................................................................... 14
Using Bluetooth mode.......................................................... 15
Advanced Setup..................................................................... 16
Connecting a Subwoofer ..................................................... 17
Using Button Combinations................................................. 18
Wall-Mounting the Sound Bar.............................................. 19
Help & Troubleshooting........................................................ 21
Limited Warranty Information............................................. 24
Legal Information.................................................................. 26
Specifications......................................................................... 27
PACKAGE CONTENTS
High Definition Sound Bar Remote Control with Quick Start Guides
2 x AAA Batteries (1 English, 1 French/Spanish)
4
CONTROLS & CONNECTIONS
Back of Sound Bar
SUB OUT
Subwoofer Out AUX
USB*
Analog Audio In
OPTICAL USB In
(Stereo 3.5mm)
Digital Optical
Audio In AUX Power Port
Analog Audio In
DIGITAL
(Stereo RCA)
Coaxial In
OR
BETTER
Back of Sound Bar
† Not all TVs have the audio outputs shown above. To connect the
AND CONNECT Sound Bar directly to your other devices (Blu-Ray player, game
system, etc.) see your device’s user manual.
IT TO YOUR TV
‡ When using either of the Digital Inputs, if there is no audio: (A)
try setting the TV output to PCM or (B) Connect directly to your
Blu-ray/other source, some TVs do not pass through digital audio.
7
2 Connect the included power adapter
to the Sound Bar DC IN as shown.
8
3 For the best surround sound experience, position the Sound Bar as shown.
The Sound Bar should be close to ear level.
9
4 5
Top Top
Remove the battery cover by gently Insert the included batteries and gently
sliding it away from the remote. slide the battery cover back into place.
The LED indicators on the front of the Sound Bar will Power Input
begin cycling in pairs through inputs until an audio
source is detected.*
Power Bluetooth
Press to turn the sound bar on or off. Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
TruVolume TruSurround HD
Press to enable/disable TruVolume. Press to enable/disable TruSurround HD.
Bass Treble
Press to enter bass adjustment mode. Press to enter treble adjustment mode.
Mute EQ
Press to mute/unmute. Press to cycle between Movie and
Music audio modes.
(Movie mode is on by default)
11
LED INDICATORS
LED Indicators are located here.
The LED Indicators will behave differently with each button on the remote control.
Function LED Behavior Description
Optical (4)
Bluetooth
Input • Coaxial In - Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
• USB In - USB (6)
Press and hold the button on the remote. The Sound Bar will be discoverable for 15
(When searching for device)
Bluetooth minutes. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth
Flash from the bottom to
top and back continuously.
Device. The sound bar will power down if no device is found.
Pairing
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
12
Function LED Behavior Description
DTS TruSurround On Press the TSHD button to enable/disable DTS TruSurround. When enabled (On),
TruSurround all inputs will produce virtual surround sound. When disabled (Off), all sources will
On/Off TruSurround Off playback in stereo.
Treble
Press the TREBLE button then press the Next/Previous button to increase/decrease
Two center LEDs indicate
Treble level 0. the treble level. The LED indicators will move up with increasing levels and down with
Levels
decreasing levels.
Press the BASS button then press the Next/Previous button to increase/decrease
Bass Two center LEDs indicate
Levels
the bass level. The LED indicators will move up with increasing levels and down with
Bass level 0.
decreasing levels. If Bass is set to minimum, the external sub level will be set to off.
Press the EQ button to enable Movie or Music mode. When the four center LEDs are
Movie Mode lit, the preset audio settings for watching movies are enabled. When the four center
EQ
Mode
LEDs are not lit, the preset audio settings for listening to music are enabled.
Music Mode
Note: Movie mode is on by default.
13
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
2. You can now search for the Sound Bar (VIZIO SB2920)
using your Bluetooth device. For more information, refer
to the user documentation that came with the device.
Bluetooth Device
14
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from Maximizing Signal
smartphones, tablets, and computers with Bluetooth
capability. Device compatibility will vary, see your A Bluetooth signal has a range of up to 30 feet. Keep
device’s documentation for more information. Once in mind that Bluetooth is a compressed audio format,
you have paired your source device to the Sound Bar, so streamed music may lose some integrity when
as long as you stay within range of the Sound Bar, your compared to a wired connection.
device should remain paired, even if you change the
Try the following if your sound quality is less than
input on the Sound Bar.
optimal:
• If you hear any break-up or disconnect while streaming music from
Your Sound Bar is not equipped with a your device, move the source device closer to the Sound Bar.
• Be sure that there are no solid obstructions in the line-of-sight be-
microphone, so it cannot operate as a tween the Sound Bar and the source device.
hands-free device for a smartphone. • Other wireless devices can affect Bluetooth range, including wireless
security cameras, wireless video baby monitors, cordless phones, and
microwave ovens. Turning off or moving these devices may improve
Bluetooth range.
15
ADVANCED SETUP
Back of Sound Bar
To connect a subwoofer:
1. Press the BASS button on the remote control to enter bass
adjustment mode.
Optional Subwoofer*
2. Use the Previous/Next buttons to adjust the bass level to the
center position.
3. Power Off the Sound Bar and Subwoofer. Connect an RCA cable
from the Sound Bar to the Subwoofer.
If Bass is set to minimum, the external sub level will be set to off.
There are 3 functions that are triggered by 3 different button combinations on the Sound Bar.
Reset the Sound Bar to the factory default settings. To perform a Factory
Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for
Factory All 12 LEDs will
5 seconds.
Reset flash 3 times
Note: This will erase all settings and preferences that you have set.
When the Energy Star setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar
Energy Star will remain powered on until you turn it off. To enable/disable this
Energy Enabled function, Press and Hold the Power ( ) and Volume Down (—) buttons
Star Energy Star for 5 seconds.
Disabled
18
WALL-MOUNTING THE SOUND BAR
1
Back of Sound Bar Wall-Mount Screw Holes
20
HELP & TROUBLESHOOTING
• Press the POWER button on the remote control or on the top of your Sound Bar.
There is no power. • Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
There is no sound. your Blu-ray/other source, some TVs do not pass through digital audio.
• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
21
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
Hours Of Operation:
Monday - Friday: 7 am to 11 pm (CST)
Saturday - Sunday: 9 am to 6 pm (CST)
Take A Moment To Register Your Product At
VIZIO.COM/PRODUCT-REGISTRATION
Why Register?
Customized Support
Get assistance quickly with your information on-hand.
Frequency
75 Hz - 90 Hz to 19 KHz
Response (System):
27
© 2016 VIZIO INC. ALL RIGHTS RESERVED.
160310OC-US-A