Professional Documents
Culture Documents
Genagen CAB (Version 2013)
Genagen CAB (Version 2013)
GENAGEN® CAB
Manufacture
Genagen® CAB is produced by reaction of coconut fatty acid with N,N
dimethylamino propylamine and reaction of this coconut fatty acid amide with
mono chloro acetic acid.
Profile
Genagen® CAB has good foaming properties and shows outstanding thickening
action in combination with Ether sulphates like Genapol® LRO and salt.
However, Genagen® CAB is one of the mildest Co-Surfactants used for personal
care applications. The mildness of formulations based on Ether sulphates like
Genapol® LRO are greatly improved. Due to these properties Genagen® CAB can
be used in all mild skin or hair cleansing formulations like face cleaning gels,
shower gels, shampoos, foam baths or liquid soaps in amounts of 2 to 10 %.
Compatibility
Being an amphoteric surfactant, Genagen® CAB shows high compatibility to
anionic, cationic or nonionic substances. The properties of Genagen® CAB are
not affected by hard water.
1 These characteristics are for guidance only and not to be taken as product specifications. The
tolerances are given in the product specification sheet. For further product properties, specifications,
safety and ecological data, please refer to the MSDS.
and also leads to an improvement in foam structure, often desired in commercial www.ics.clariant.com
practice, i.e. a fine-bubbled, creamy foam is obtained. www.clariant.com
Storage
Genagen® CAB is stable for at least two years at room temperature in its original
containers.
This information corresponds to the present state of our knowledge For sales to customers located within the United States and Canada
and is intended as a general description of our products and their the following applies in addition:
possible applications. Clariant makes no warranties, express or NO EXPRESS OR IMPLIED WARRANTY IS MADE OF THE
implied, as to the information’s accuracy, adequacy, sufficiency or MERCHANTABILITY, SUITABILITY, FITNESS FOR A PARTICULAR
freedom from defect and assumes no liability in connection with any PURPOSE OR OTHERWISE OF ANY PRODUCT OR SERVICE.
use of this information. Any user of this product is responsible for
determining the suitability of Clariant’s products for its particula
application. * Nothing included in this information waives any of ® Trademark of Clariant registered in many countries
Clariant’s General Terms and Conditions of Sale, which control © 2012 Clariant International Ltd
unless it agrees otherwise in writing. Any existing
intellectual/industrial property rights must be observed. Due to
possible changes in our products and applicable national and
international regulations and laws, the status of our products could
change. Material Safety Data Sheets providing safety precautions,
that should be observed when handling or storing Clariant products,
are available upon request and are provided in compliance with
applicable law. You should obtain and review the applicable Material
Safety Data Sheet information before handling any of these products.
For additional information, please contact Clariant.