Professional Documents
Culture Documents
HETS2112-033-NEW MARKING
HETS2112-033-NEW MARKING
Specification
For
CONFIRMED BY CUSTOMER:
2. CONSTRUCTION
Conductor : Plain annealed circular stranded copper conductor class 2 as perIEC 60228.
Insulation : Polyethylene (PE) compound.
Twisted : Two insulated core shall be twisted together into a pairs.
Collectively screened : Laminated aluminum/Polyester tape with a tinned annealed copper drain
wire.
Inner Covering : Black colored Polyethylene (PE) compound.
Armouring : Galvanized steel wire armoured with binder tape.
Outer sheath : Flame retardant polyvinyl chloride (PVC) compound with ultra violet (UV).
Outer sheath color : Light Blue (IS)
Core identification:
Single pair : White (+), Black (-)
Length marking:
“Continuously marked at every 1m interval throughout the cable length”
3.TEST
3.1 Standard Factory Routine Tests (To be performed during FAT)
a) Construction and dimensional test
b) Conductor resistance test
c) Insulation resistance test
d) A.C. voltage test
3.2 Additional Type Tests (The Cables Compliance to this Test. If required we can perform
these Test but with additional cost impact)
a) Flame retardant test according to IEC 60332-3 Cat A. (compliance to)
b) H.C.L. emission < 17% by weight, test according to IEC 60754-1. (compliance to)
c) Oxygen index >30, test according to ASTM D 2863. (compliance to)
4. PACKING
Each drum of cable length shall be wound on reel to prevent damage during transportation and
handling
HE
DATE : APRIL 22, 2021
Specification No. : HETS-2007-010-Rev:5
DE No. : HEDE-2007-010-Rev:5
6. OVALITY
The measurement of ovality shall be made in accordance to BS 7211 in which the difference between any 2 values of diameter shall not be more than 15% of the
upper limit (Max. spec) for the mean overall diameter.
≤ 15%