Professional Documents
Culture Documents
692697-classic-lantern-street-light-ec1b6c94-b361-4c7f-bc58-119c794f3fc9
692697-classic-lantern-street-light-ec1b6c94-b361-4c7f-bc58-119c794f3fc9
692697-classic-lantern-street-light-ec1b6c94-b361-4c7f-bc58-119c794f3fc9
LY
N
O
EL
Street Light
D
O
M
3D
Ben Oxford
VIEW IN BROWSER
Summary
Additional parts used to turn https://www.printables.com/model/557480-
classic-lantern into a street light
1. https://www.printables.com/model/557480-classic-lantern
Printed parts included in this file:
Instructions:
Used 1 small screw through the candle hold of choice, then the lantern
bottom and into the 1 1⁄2 inch PVC cap. Cut the 1 1⁄2 inch PVC to desired
length. Slide the base top up from the bottom of the 1 1⁄2 inch pole, then
the 4 inch PVC and finally line the 1 1⁄2 inch pole up with the insert on
base bottom piece and push all together. You can glue or silicone the base
to the bottom and add sand or other medium to add weight if desire. Mine
was fine without it. Then screw 3 or 4 of the shelf brackets to the base for
support. It did stand on its own but I added the feet to make it more stable
outside.
Model files
street-light-base-bottom-4-inch-pvc-with-15-inch-pv… .stl
street-light-base-top-4-inch-pvc-with-15-inch-pvc-p… .stl
lantern-candle-holder-single.stl
lantern-candle-holder-double.stl
street-light-end-knobs-half-inch-pvc.stl
License
Attribution-ShareAlike