Professional Documents
Culture Documents
Similar Dekguard-Repcoat S100
Similar Dekguard-Repcoat S100
Description
Technical Properties:
Repcoat S100 is ready for use, single component, alipha c
White, grey, buff, brown &
acrylate coa ng for external and internal use over variety Colour:
many other colours
of concrete and masonry substrates. The system also
includes an under coat of a silane-siloxane base which Volume solids: 35 ± 3%
when used with Repcoat S100 will provide maximum
protec on against chloride ingress and carbon dioxide Specific gravity: 1.24 ± 0.05
diffusion. Over coa ng me for
5 hr @ 25°C
Repcoat S100 Primer:
Repcoat S100 Primer is a penetra ng hydrophobic silane-
siloxane base which when applied will react with concrete Carbon dioxide diffu- > 250 m equivalent thick-
and masonry producing a clear hydrophobic barrier that sion resistance: ness of air
prevent the passage of water and hence protect exposed Carbon dioxide diffu- > 500 mm equivalent thick-
reinforced concrete structures from a ack by chloride sion resistance: ness of concrete
ions.
Touch dry me: 30 - 40 min @ 25oC
Applications Applica on tempera-
5 - 50°C
ture:
Repcoat S100 is an excellent protec ve and decora ve
fair face coa ng which can be used for many applica ons Freeze/thaw salt scal- Unaffected
including: ing (50 cycles)
Good quality concrete Severe scaling
Retaining walls. (control)
Bridge abutments. ASTM C672
External concrete of storage tanks.
Fire tes ng - Spread
Mul story buildings and villas.
of flame: Class 1
Pre-cast elements and concrete cladding.
BS 476, Part 7
Commercial and Industrial complexes.
The results achieved are for the Repcoat S system ap-
Advantages plied at the minimum recommended applicaƟon rate.
The second coat should be applied perpendicular to the For further informa on refer to the Material Safety Data
first coat at the rate of 0.15 litre/m2. Repcoat S100 may Sheet.
need to be thinned up to 5% by weight when using airless
spray machine. Fire
Cleaning Repcoat S100 and Repcoat S100 Primer, and DCP primer
are flammable. Ensure adequate ven la on. Do not use
Tools and equipment can be cleaned with DPC-Solvent near a naked flame and do not smoke during use.
when wet. Dried Repcoat S100 should be removed using
DCP-Solvent or mechanically. More from Don Construction Products
Shelf Life
Cautions
Note:
IND-06-2015-A
tĞĞŶĚĞĂǀŽƵƌƚŽĞŶƐƵƌĞƚŚĂƚĂŶLJŝŶĨŽƌŵĂƟŽŶ͕ĂĚǀŝĐĞŽƌƌĞĐŽŵŵĞŶĚĂƟŽŶǁĞŵĂLJŐŝǀĞŝŶ
ƉƌŽĚƵĐƚ ůŝƚĞƌĂƚƵƌĞ ŝƐ ĂĐĐƵƌĂƚĞ ĂŶĚ ĐŽƌƌĞĐƚ͘ ,ŽǁĞǀĞƌ͕ ďĞĐĂƵƐĞ ǁĞ ŚĂǀĞ ŶŽ ĐŽŶƚƌŽů ŽǀĞƌ
ǁŚĞƌĞĂŶĚŚŽǁƉƌŽĚƵĐƚƐĂƌĞĂƉƉůŝĞĚ͕ǁĞĐĂŶŶŽƚĂĐĐĞƉƚĂŶLJůŝĂďŝůŝƚLJĂƌŝƐŝŶŐĨƌŽŵƚŚĞƵƐĞŽĨ
ƚŚĞƉƌŽĚƵĐƚƐ͘