Professional Documents
Culture Documents
MAU3716_Ratings_Book
MAU3716_Ratings_Book
BOOK
GUIDA TECNICA
POTENZE
TECHNICAL GUIDE
Contents
Ratings Definitions 05
Dynamic Data Support 05
Environmental Considerations 06
International Protection IP Ratings 07
Additional Information
Wiring Connection Diagram 58
SAE Coupling and Mounting Guide 60
Infographic Icons Summary 61
Rating Definitions
Emergency Standby Power (ESP) Prime Rated Power (PRP)
Emergency standby power is defined as the Prime power is defined as being the maximum power which a
maximum power available during a variable electrical generating set is capable of delivering continuously while
power sequence, under the stated operating supplying a variable electrical load with an average load ≤70%,
conditions, for which a generating set is capable of when operated for an unlimited number of hours per year
delivering in the event of a utility power outage or under the agreed operating conditions with the maintenance
under test conditions for up to 200 h of operation intervals and procedures being carried out as prescribed by the
per year with the maintenance intervals and manufacturer. A 10% overload power is permitted for a period
procedures being carried out as prescribed by the of one hour with or without interruptions, within 6 hours of
manufacturers. operation; in these conditions the generator insulation system
can age thermally faster.
Limited-time running power (LTP)
Limited-time running power is defined as the
Continuous Operating Power (COP)
maximum power available, under the agreed Continuous power is defined as beign the maximum power
operating conditions, for which the generating set is which the generating set is capable of delivering continuously
capable of delivering for up to 500 h of operation while supplying a constant electrical load when operated for
per year with the maintenance intervals and an unlimited number of hours per year under the agreed
procedures being carried out as prescribed by the operating conditions with the maintenance intervals and
manufacturers. procedures being carried out as prescribed by the manufactu-
rer. Overload on this rating is not allowed.
The 10% overload is not available at ESP and LTP
ratings. In the ‘Ratings Book’ you can find PRP or COP
In the ‘Ratings Book’ you can find ESP or LTP ratings for:
ratings for: 80°/40°: this condition is equivalent to Class B
150°/40°: Peak continuous ratings according to temperature rise.
ISO8528-3. 105°/40°: this condition is equivalent to Class F
temperature rise.
163°/27°: Emergency peak continuous rating, not
defined in ISO specification. Suitable for stand-by 125°/40°: this condition is equivalent to Class H
sizing only. temperature rise.
Environmental Concerns
Generators are often exposed to harmful airborne impregnation technologies, like Vacuum Pressure
pollutants, like sand and saltwater which may require Impregnation (VPI) or with the use of dedicated roll
some form of protection to reduce or eliminate these and dip or trickle machines. This impregnation quality
harmful agents. Common elements like dirt, gravel or process is perfect for the vast majority of applications,
rock dust can create abrasive and potentially damaging however in order to achieve the same results in
insulation reliability when environmental or operating
conditions are demanding, it is possible to consider
extend the life of the protective insulation, it may be
Mecc Alte. Please refer to our separate Technical guide:
manufacture. It is also extremely important to recognize Insulation Protection Systems for further guidance
on our; standard, standard+, grey, grey+ and total+
through the generator and create additional heat in the systems. Please consult your Mecc Alte Representative
windings. It is also important to understand that the use for application reviews and recommendations.
of filters requires a strict maintenance regime.
All information are available in our Insulation
Mecc Alte uses premium class H insulation material. Protection Systems Guide:
Impregnation processes are achieved with the latest https://www.meccalte.com/downloads/Insulation_system.pdf
IP 2 3 IP Protection
Code Letters X0 Non-protected machine
(International Protection) X1 Dripping water
First characteristic numeral X2 Dripping water when tilted up to 15°
(numerals 0 to 6, or letter X)
X3 Spraying water
Second characteristic numeral X4 Splashing water
(numerals 0 to 8, or letter X)
X5 Water jets
X6 Heavy seas
When it is required to indicate a degree of protection by Effects of immersion
X7
only one characteristics numeral, the omitted numeral shall
be replaced by the letter X, for example IPX5 or IP2X. X8 Continuous submersion
Additional information may be indicated by a supplementary Mecc Alte offers IP23 across its industrial range.
letter following the second characteristics numeral. If more Upgrades are available such as IP23 DP, or upwards; in
than one letter is used, the alphabetic sequence shall apply. fact, the whole 4 pole industrial range can be upgraded
to IP45 with the fitting of additional IP filter kits.
In special applications (such as machines with open circuit However, when protecting against ingress, the airflow
cooling for ship deck installation with air inlet and outlet and cooling is impacted.
openings closed during standstill) numerals may be followed
by a letter indicating whether the protection against harmful All information are available in our IP Bulletin:
effects due to ingress of water was verified or tested for the https://www.meccalte.com/downloads/MA0605_Bulletin_IP.pdf
RATINGS BOOK | 07
400V
4 Pole | 50Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1500
Insulation: Class H
Volts
ECP28 2S4 C 91 12 DSR 16.5 15.4 15 14.1 12
ECP28 3S4 C 97 12 DSR 19.2 18 17.5 16.5 14
/ 400
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
/ 230
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
ECP30 1M4 C 105 12 DSR 22 20.5 20 18.5 16
ECP30 2M4 C 118 12 DSR 27.5 25.5 25 23 20
/ 200
ECP30 3M4 C 130 12 DSR 33 30.5 30 26 24
ECP30 1L4 C 148 12 DSR 38.5 35.6 35 30.3 28
ECP30 2L4 C 158 12 DSR 44 40.7 40 34.7 32
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30 115
ECP32 2S4 C 165 12 DSR 50 48.7 45 41 36
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO38 VL4 C 957 12 DSR 400 380 370 338 296
1 of 2
Volts
ECO40 VL4 C 1752 12 DER-1/A 825 777 750 690 600
ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655
ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744
/ 800
ECO43 1M4 A 2275 12 DER-1/A 1125 1070 1025 950 820
ECO43 2M4 A 2370 12 DER-1/A 1250 1200 1150 1050 920
/ 460
ECO43 2L4 A 2700 12 DER-1/A 1420 1358 1300 1200 1040
ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120
ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200
/ 400
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
ECO46 2S4 A 3560 12 DER-1/A 1944 1863 1800 1600 1440
ECO46 1L4 A 3805 12 DER-1/A 2268 2173 2100 1900 1680
230
ECO46 1.5L4 A 4255 12 DER-1/A 2500 2380 2300 2050 1840
ECO46 2L4 A 4375 12 DER-1/A 2700 2588 2500 2250 2000
ECO46 VL4 A 5120 12 DER-1/A 3024 2899 2800 2500 2240
ECO47LV 1M4 6400 4 DER-1/A 3240 3104 3000 2700 2400
ECO47LV 2M4 7000 4 DER-1/A 3726 3570 3450 3104 2760
ECO47LV 1L4 7700 4 DER-1/A 4320 4140 4000 3600 3200
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 09
380V
4 Pole | 50Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1500
Insulation: Class H
Volts
ECP28 2S4 C 91 12 DSR 16.5 15.4 15 14.1 12
ECP28 3S4 C 97 12 DSR 19.2 18 17.5 16.5 14
ECP28 M4 C 106 12 DSR
/ 380
22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
/ 220
ECP30 1M4 C 105 12 DSR 22 20.5 20 18.5 16
ECP30 2M4 C 118 12 DSR 27.5 25.5 25 23 20
/ 190
ECP30 3M4 C 130 12 DSR 33 30.5 30 26 24
ECP30 1L4 C 148 12 DSR 38.5 35.6 35 30.3 28
ECP30 2L4 C 158 12 DSR 44 40.7 40 34.7 32
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30 110
ECP32 2S4 C 165 12 DSR 50 48.7 45 41 36
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 176 169 160 144 128
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO38 VL4 C 957 12 DSR 380 370 360 329 288
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 735 700 680 630 544
ECO40 VL4 C 1752 12 DER-1/A 825 777 750 690 600
ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655
/ 760
ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744
ECO43 1M4 A 2275 12 DER-1/A 1038 992 950 870 760
/ 440
ECO43 2M4 A 2370 12 DER-1/A 1250 1200 1150 1050 920
ECO43 2L4 A 2700 12 DER-1/A 1420 1358 1300 1200 1040
ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120
/ 380
ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
ECO46 2S4 A 3560 12 DER-1/A 1944 1863 1800 1600 1440
220
ECO46 1L4 A 3805 12 DER-1/A 2268 2173 2100 1900 1680
ECO46 1.5L4 A 4255 12 DER-1/A 2500 2380 2300 2050 1840
ECO46 2L4 A 4375 12 DER-1/A 2700 2588 2500 2250 2000
ECO46 VL4 A 5120 12 DER-1/A 2916 2795 2700 2400 2160
ECO47LV 1M4 6400 4 DER-1/A 3078 2948 2850 2564 2280
ECO47LV 2M4 7000 4 DER-1/A 3538 3392 3278 2948 2622
ECO47LV 1L4 7700 4 DER-1/A 4104 3932 3800 3420 3040
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 11
415V
4 Pole | 50Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1500
Insulation: Class H
Volts
ECP28 2S4 C 91 12 DSR 16.5 15.4 15 14.1 12
ECP28 3S4 C 97 12 DSR 19.2 18 17.5 16.5 14
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
/ 415
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
/ 240
ECP30 1M4 C 105 12 DSR 22 20.5 20 18.5 16
ECP30 2M4 C 118 12 DSR 27.5 25.5 25 23 20
/ 208
ECP30 3M4 C 130 12 DSR 33 30.5 30 26 24
ECP30 1L4 C 148 12 DSR 38.5 35.6 35 30.3 28
ECP30 2L4 C 158 12 DSR 44 40.7 40 34.7 32
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30 120
ECP32 2S4 C 165 12 DSR 46 45 42 39 34
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO38 VL4 C 957 12 DSR 400 380 370 338 296
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 735 700 680 630 544
ECO40 VL4 C 1752 12 DER-1/A 825 777 750 690 600
ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655
/ 830
ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744
ECO43 1M4 A 2275 12 DER-1/A 1125 1070 1025 950 820
/ 480
ECO43 2M4 A 2370 12 DER-1/A 1140 1096 1050 960 840
ECO43 2L4 A 2700 12 DER-1/A 1420 1358 1300 1200 1040
ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120
/ 415
ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
ECO46 2S4 A 3560 12 DER-1/A 1944 1863 1800 1600 1440
240
ECO46 1L4 A 3805 12 DER-1/A 2268 2173 2100 1900 1680
ECO46 1.5L4 A 4255 12 DER-1/A 2500 2380 2300 2050 1840
ECO46 2L4 A 4375 12 DER-1/A 2700 2588 2500 2250 2000
ECO46 VL4 A 5120 12 DER-1/A 2916 2795 2700 2400 2160
ECO47LV 1M4 6400 4 DER-1/A 3078 2948 2850 2564 2280
ECO47LV 2M4 7000 4 DER-1/A 3538 3392 3278 2948 2622
ECO47LV 1L4 7700 4 DER-1/A 4104 3932 3800 3420 3040
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 13
380V-400V-415V
4 Pole | 50Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - Broad Voltage - 12 Lead
RPM: 1500
Insulation: Class H
1 of 2
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 15
440V
4 Pole | 50Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1500
Insulation: Class H
Volts
ECP28 M4 C 106 12 DSR 20.4 19 18.5 17.5 14.8
ECP28 L4 C 122 12 DSR – – – – –
/ 440
ECP28 VL4 C 142 12 DSR – – – – –
ECP30 1M4 C 105 12 DSR 20.4 19 18.5 17.5 15
/ 254
ECP30 2M4 C 118 12 DSR 25.2 23.7 23 21.4 18.4
ECP30 3M4 C 130 12 DSR 29.5 27.8 27 25.1 21.6
ECP30 1L4 C 148 12 DSR 34.4 32.4 31.5 29.3 25.2
/ 220
ECP30 2L4 C 158 12 DSR 39 37 36 33.5 28.8
ECP32 1S4 C 153 12 DSR 33 31.6 30 28 24 127
ECP32 2S4 C 165 12 DSR 37.5 36 34 33 27
ECP32 1M4 C 186 12 DSR 44 42 40 38 32
ECP32 2M4 C 212 12 DSR 52 49.5 47.5 42.6 38
ECP32 1L4 C 244 12 DSR 77 73 70 62 56
ECP32 2L4 C 252 12 DSR 85 79 77 68 62
ECP34 1S4 C 302 12 DSR 79 77 72 65 58
ECP34 2S4 C 349 12 DSR 88 86 80 72 64
ECP34 1M4 C 370 12 DSR 117 112 106 96 85
ECP34 2M4 C 388 12 DSR 125 120 114 103 91
ECP34 1L4 C 423 12 DSR 137 131 125 113 100
ECP34 2L4 C 440 12 DSR 170 163 155 139 124
ECO38 1S4 C 530 12 DSR 180 173 165 155 132
ECO38 2S4 C 573 12 DSR 209 200 190 175 152
ECO38 1M4 C 602 12 DSR 234 221 210 190 168
ECO38 2M4 C 692 12 DSR 253 243 230 215 184
ECO38 1L4 C 790 12 DSR 319 305 290 265 232
ECO38 2L4 C 930 12 DSR 360 350 340 310 272
ECO38 VL4 C 957 12 DSR 370 360 350 319 280
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 560 535 520 483 416
ECO40 VL4 C 1752 12 DER-1/A 740 700 680 630 544
ECO43 1S4 A 1920 12 DER-1/A 825 800 760 690 615
/ 880
ECO43 2S4 A 2140 12 DER-1/A 907 870 830 770 664
ECO43 1M4 A 2275 12 DER-1/A 1093 1044 1000 910 800
/ 508
ECO43 2M4 A 2370 12 DER-1/A 983 940 900 820 720
ECO43 2L4 A 2700 12 DER-1/A 1349 1290 1235 1140 988
ECO43 VL4 A 2980 12 DER-1/A – – – – –
/ 440
ECO46 1S4 A 3005 12 DER-1/A 1400 1340 1300 1170 1040
ECO46 1.5S4 A 3375 12 DER-1/A 1620 1545 1500 1360 1200
ECO46 2S4 A 3560 12 DER-1/A 1720 1650 1600 1440 1280
254
ECO46 1L4 A 3805 12 DER-1/A 1990 1900 1850 1660 1480
ECO46 1.5L4 A 4255 12 DER-1/A 2375 2275 2200 1950 1760
ECO46 2L4 A 4375 12 DER-1/A 2450 2350 2280 2050 1824
ECO46 VL4 A 5120 12 DER-1/A 2150 2060 2000 1780 1600
ECO47LV 1M4 6400 4 DER-1/A 2944 2822 2727 2454 2180
ECO47LV 2M4 7000 4 DER-1/A 3386 3244 3136 2822 2508
ECO47LV 1L4 7700 4 DER-1/A 3926 3762 3636 3272 2908
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 17
220V - 230V - 240V
4 Pole | 50Hz | 1Phase | 1 PF | AVR Controlled
Winding: Standard - Reconnected - 12 Lead
RPM: 1500
Insulation: Class H
1 of 2
PARALLEL DELTA
ECO40 3S4 C 1208 12 DER-1/A 302 285 276 246 221
ECO40 1L4 C 1323 12 DER-1/A 315 307 292 266 233
ECO40 2L4 C 1458 12 DER-1/A 335 320 310 280 248
ECO40 3L4 C 1536 12 DER-1/A 360 345 335 310 268
ECO40 VL4 C 1752 12 DER-1/A 470 450 435 366 348
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 19
220V - 230V - 240V
4 Pole | 50Hz | 1Phase | 0.8 PF | AVR Controlled
Winding: Standard - Reconnected - 12 Lead
RPM: 1500
Insulation: Class H
1 of 2
PARALLEL DELTA
ECO40 3S4 C 1208 12 DER-1/A 287 272 263 234 210
ECO40 1L4 C 1323 12 DER-1/A 300 289 275 251 220
ECO40 2L4 C 1458 12 DER-1/A 316 299 290 262 232
ECO40 3L4 C 1536 12 DER-1/A 339 320 311 288 249
ECO40 VL4 C 1752 12 DER-1/A 412 391 378 318 302
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 21
230V
4 Pole | 50Hz | 1Phase | 1 PF | AVR Controlled
Winding: Dedicated - 4 Lead
RPM: 1500
Insulation: Class H
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 23
480V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 3S4 C 97 12 DSR 23 21.6 21 19.6 16.8
ECP28 M4 C 106 12 DSR 26.4 24.6 24 22 19.2
/ 480
ECP28 L4 C 122 12 DSR 33 30.6 30 27.5 24
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
/ 277
ECP30 1M4 C 105 12 DSR 26.4 24.6 24 22 19.2
ECP30 2M4 C 118 12 DSR 33 30.6 30 27.5 24
ECP30 3M4 C 130 12 DSR 39.6 36.6 36 32 28.8
/ 240
ECP30 1L4 C 148 12 DSR 46.2 42.7 42 37.3 33.6
ECP30 2L4 C 158 12 DSR 52.8 48.8 48 42.7 38.4
ECP32 1S4 C 153 12 DSR 49.5 47 45 43 36 138
ECP32 2S4 C 165 12 DSR 59 57 54 52 43.2
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 82.5 77.5 75 71.5 60
ECP32 1L4 C 244 12 DSR 99 93.7 90 83 72
ECP32 2L4 C 252 12 DSR 110 102 100 92 80
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
ECP34 1M4 C 370 12 DSR 165 159 150 135 120
ECP34 2M4 C 388 12 DSR 178 172 162 146 130
ECP34 1L4 C 423 12 DSR 198 189 180 163 144
ECP34 2L4 C 440 12 DSR 218 208 198 178 158
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 396 378 360 330 288
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO38 VL4 C 957 12 DSR 465 453 440 403 352
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 882 840 816 756 653
ECO40 VL4 C 1752 12 DER-1/A 970 925 900 830 720
ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790
/ 960
ECO43 2S4 A 2140 12 DER-1/A 1220 1170 1116 1020 893
ECO43 1M4 A 2275 12 DER-1/A 1365 1300 1250 1140 1000
/ 554
ECO43 2M4 A 2370 12 DER-1/A 1525 1450 1400 1300 1120
ECO43 2L4 A 2700 12 DER-1/A 1700 1630 1560 1440 1248
ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360
/ 480
ECO46 1S4 A 3005 12 DER-1/A 1944 1875 1800 1620 1440
ECO46 1.5S4 A 3375 12 DER-1/A 2140 2040 1980 1780 1584
ECO46 2S4 A 3560 12 DER-1/A 2332 2236 2160 1920 1728
277
ECO46 1L4 A 3805 12 DER-1/A 2722 2608 2520 2280 2016
ECO46 1.5L4 A 4255 12 DER-1/A 2980 2860 2760 2460 2208
ECO46 2L4 A 4375 12 DER-1/A 3240 3105 3000 2700 2400
ECO46 VL4 A 5120 12 DER-1/A 3683 3529 3410 3050 2728
ECO47LV 1M4 6400 4 DER-1/A 3888 3724 3600 3240 2880
ECO47LV 2M4 7000 4 DER-1/A 4470 4284 4140 3724 3312
ECO47LV 1L4 7700 4 DER-1/A 5184 4968 4800 4320 3840
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 25
460V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 2S4 C 91 12 DSR
ECP28 3S4 C 97 12 DSR 23 21.6 21 19.6 16.8
ECP28 M4 C 106 12 DSR 26.4 24.6 24 22 19.2
/ 460
ECP28 L4 C 122 12 DSR 33 30.6 30 27.5 24
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
/ 266
ECP30 1M4 C 105 12 DSR 26.4 24.6 24 22 19.2
ECP30 2M4 C 118 12 DSR 33 30.6 30 27.5 24
ECP30 3M4 C 130 12 DSR 39.6 36.6 36 32 28.8
/ 230
ECP30 1L4 C 148 12 DSR 46.2 42.7 42 37.3 33.6
ECP30 2L4 C 158 12 DSR 52.8 48.8 48 42.7 38.4
ECP32 1S4 C 153 12 DSR 49.5 47 45 43 36 133
ECP32 2S4 C 165 12 DSR 59 57 54 52 43.2
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 82.5 77.5 75 71.5 60
ECP32 1L4 C 244 12 DSR 99 93.7 90 83 72
ECP32 2L4 C 252 12 DSR 110 102 100 92 80
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
ECP34 1M4 C 370 12 DSR 165 159 150 135 120
ECP34 2M4 C 388 12 DSR 178 172 162 146 130
ECP34 1L4 C 423 12 DSR 198 189 180 163 144
ECP34 2L4 C 440 12 DSR 218 208 198 178 158
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 396 378 360 330 288
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO38 VL4 C 957 12 DSR 455 442 430 394 344
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 882 840 816 756 653
ECO40 VL4 C 1752 12 DER-1/A 970 925 900 830 720
ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790
/ 920
ECO43 2S4 A 2140 12 DER-1/A 1220 1170 1116 1020 893
ECO43 1M4 A 2275 12 DER-1/A 1290 1227 1180 1080 944
/ 530
ECO43 2M4 A 2370 12 DER-1/A 1525 1450 1400 1300 1120
ECO43 2L4 A 2700 12 DER-1/A 1700 1630 1560 1440 1248
ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360
/ 460
ECO46 1S4 A 3005 12 DER-1/A 1944 1875 1800 1620 1440
ECO46 1.5S4 A 3375 12 DER-1/A 2140 2040 1980 1780 1584
ECO46 2S4 A 3560 12 DER-1/A 2332 2236 2160 1920 1728
266
ECO46 1L4 A 3805 12 DER-1/A 2722 2608 2520 2280 2016
ECO46 1.5L4 A 4255 12 DER-1/A 2980 2860 2760 2460 2208
ECO46 2L4 A 4375 12 DER-1/A 3240 3105 3000 2700 2400
ECO46 VL4 A 5120 12 DER-1/A 3575 3426 3310 2980 2648
ECO47LV 1M4 6400 4 DER-1/A 3726 3570 3450 3104 2760
ECO47LV 2M4 7000 4 DER-1/A 4284 4106 3968 3570 3174
ECO47LV 1L4 7700 4 DER-1/A 4968 4760 4600 4140 3680
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
RATINGS BOOK | 27
440V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 1S4 C 87 12 DSR 15.3 14.3 13.9 12.5 11.1
ECP28 2S4 C 91 12 DSR 18.1 16.8 16.4 15.4 13.1
ECP28 3S4 C 97 12 DSR 21.1 19.7 19 18 15.3
/ 440
ECP28 M4 C 106 12 DSR 25.3 23.6 23 20 18.4
ECP28 L4 C 122 12 DSR 30.3 28 27.5 25.5 22
/ 254
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
ECP30 1M4 C 105 12 DSR 25.3 23.6 23 20 18.4
/ 220
ECP30 2M4 C 118 12 DSR 30.3 28 27.5 26 22
ECP30 3M4 C 130 12 DSR 39.6 37 36 32 28.8
ECP30 1L4 C 148 12 DSR 46.2 43 42 37 33.6
127
ECP30 2L4 C 158 12 DSR 52.8 49 48 43 38.4
ECP32 1S4 C 153 12 DSR 47 45 43 41 34.4
ECP32 2S4 C 165 12 DSR 55 53 50 48 40
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 80 74 72.5 70 58
ECP32 1L4 C 244 12 DSR 90 86 82 80 65.6
ECP32 2L4 C 252 12 DSR 106 98 96 89 76.8
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
ECP34 1M4 C 370 12 DSR 154 147 140 125 112
ECP34 2M4 C 388 12 DSR 165 159 150 135 120
ECP34 1L4 C 423 12 DSR 187 178 170 150 136
ECP34 2L4 C 440 12 DSR 210 201 191 165 153
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 374 357 340 310 272
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO38 VL4 C 957 12 DSR 455 442 430 394 344
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 843 803 780 720 624
ECO40 VL4 C 1752 12 DER-1/A 970 925 900 830 720
ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790
/ 880
ECO43 2S4 A 2140 12 DER-1/A 1159 1111 1060 969 850
ECO43 1M4 A 2275 12 DER-1/A 1200 1144 1100 1000 880
/ 508
ECO43 2M4 A 2370 12 DER-1/A 1420 1357 1300 1200 1040
ECO43 2L4 A 2700 12 DER-1/A 1618 1550 1482 1368 1186
ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360
/ 440
ECO46 1S4 A 3005 12 DER-1/A 1847 1770 1710 1530 1368
ECO46 1.5S4 A 3375 12 DER-1/A 2030 1936 1880 1690 1504
ECO46 2S4 A 3560 12 DER-1/A 2213 2122 2050 1820 1640
254
ECO46 1L4 A 3805 12 DER-1/A 2582 2473 2390 2150 1912
ECO46 1.5L4 A 4255 12 DER-1/A 2829 2715 2620 2330 2096
ECO46 2L4 A 4375 12 DER-1/A 3067 2939 2840 2550 2272
ECO46 VL4 A 5120 12 DER-1/A 3375 3234 3125 2800 2500
ECO47LV 1M4 6400 4 DER-1/A 3564 3414 3300 2970 2640
ECO47LV 2M4 7000 4 DER-1/A 4098 3926 3795 3414 3036
ECO47LV 1L4 7700 4 DER-1/A 4752 4554 4400 3960 3520
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 29
415V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 3S4 C 97 12 DSR 19.8 18.5 18 17 14.4
ECP28 M4 C 106 12 DSR 23.1 21.5 21 19 16.8
ECP28 L4 C 122 12 DSR 28.6 26.5 26 24 20.8
/ 415
ECP28 VL4 C 142 12 DSR 36.3 33.5 33 29 26.4
ECP30 1M4 C 105 12 DSR 23.1 21.5 21 19 16.8
/ 240
ECP30 2M4 C 118 12 DSR 28.6 27 26 24 20.8
ECP30 3M4 C 130 12 DSR 36.3 34 33 29 26.4
/ 208
ECP30 1L4 C 148 12 DSR 42.4 39 38.5 34 30.8
ECP30 2L4 C 158 12 DSR 48.4 45 44 39 35.2
ECP32 1S4 C 153 12 DSR 43.5 42 39.5 37 31.6 120
ECP32 2S4 C 165 12 DSR 52 50 47 43 37.6
ECP32 1M4 C 186 12 DSR 60.5 58 55 53 44
ECP32 2M4 C 212 12 DSR 76 71 69 63 55.2
ECP32 1L4 C 244 12 DSR 86 81 78 73 62.4
ECP32 2L4 C 252 12 DSR 97 90 88 81 70.4
ECP34 1S4 C 302 12 DSR 108 104 98 88 78
ECP34 2S4 C 349 12 DSR 120 114 110 99 88
ECP34 1M4 C 370 12 DSR 143 137 130 116 104
ECP34 2M4 C 388 12 DSR 154 148 140 125 112
ECP34 1L4 C 423 12 DSR 165 158 150 132 120
ECP34 2L4 C 440 12 DSR 187 179 170 155 136
ECO38 1S4 C 530 12 DSR 225 220 210 195 168
ECO38 2S4 C 573 12 DSR 253 242 230 210 184
ECO38 1M4 C 602 12 DSR 289 274 260 240 208
ECO38 2M4 C 692 12 DSR 319 305 290 270 232
ECO38 1L4 C 790 12 DSR 358 341 325 300 260
ECO38 2L4 C 930 12 DSR 402 391 380 350 304
ECO38 VL4 C 957 12 DSR 413 401 390 359 312
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 778 741 720 665 576
ECO40 VL4 C 1752 12 DER-1/A 930 885 860 790 688
ECO43 1S4 A 1920 12 DER-1/A 990 945 900 820 720
/ 830
ECO43 2S4 A 2140 12 DER-1/A 1115 1069 1020 935 816
ECO43 1M4 A 2275 12 DER-1/A 1147 1117 1050 960 840
/ 480
ECO43 2M4 A 2370 12 DER-1/A 1300 1250 1200 1090 960
ECO43 2L4 A 2700 12 DER-1/A 1585 1516 1451 1339 1161
ECO43 VL4 A 2980 12 DER-1/A 1736 1680 1600 1450 1280
/ 415
ECO46 1S4 A 3005 12 DER-1/A 1728 1656 1600 1440 1280
ECO46 1.5S4 A 3375 12 DER-1/A 1870 1782 1730 1570 1384
ECO46 2S4 A 3560 12 DER-1/A 2116 2028 1950 1750 1560
240
ECO46 1L4 A 3805 12 DER-1/A 2480 2370 2300 2070 1840
ECO46 1.5L4 A 4255 12 DER-1/A 2613 2508 2420 2150 1936
ECO46 2L4 A 4375 12 DER-1/A 2920 2800 2700 2430 2160
ECO46 VL4 A 5120 12 DER-1/A 3136 3007 2900 2600 2320
ECO47LV 1M4 6400 4 DER-1/A 3362 3220 3113 2800 2490
ECO47LV 2M4 7000 4 DER-1/A 3862 3704 3579 3220 2862
ECO47LV 1L4 7700 4 DER-1/A 4482 4294 4150 3734 3320
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 31
415V - 440V - 460V - 480V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - Broad Voltage - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 33
400V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 1S4 C 87 12 DSR 14.1 13.1 12.8 12.1 10.2
ECP28 2S4 C 91 12 DSR 16.8 15.7 15.3 14.4 12.2
ECP28 3S4 C 97 12 DSR 19.6 18.3 17.8 16.8 14.2
/ 400
ECP28 M4 C 106 12 DSR 22.5 20.9 20.5 19 16.4
ECP28 L4 C 122 12 DSR 28 26 25.5 23.5 20.4
/ 230
ECP28 VL4 C 142 12 DSR 34.6 32.4 31.5 27.3 25.2
ECP30 1M4 C 105 12 DSR 22.5 20.9 20.5 19 16.4
/ 200
ECP30 2M4 C 118 12 DSR 28 26 25.5 24 20.4
ECP30 3M4 C 130 12 DSR 34.7 32 31.5 27 25.2
ECP30 1L4 C 148 12 DSR 40.4 38 36.8 32 29.4
115
ECP30 2L4 C 158 12 DSR 46.1 43 42 36 33.6
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30
ECP32 2S4 C 165 12 DSR 50 49 45 41 36
ECP32 1M4 C 186 12 DSR 55 53 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 58 50
ECP32 1L4 C 244 12 DSR 82.5 80 75 67 60
ECP32 2L4 C 252 12 DSR 95 89 86 77 68.8
ECP34 1S4 C 302 12 DSR 99 96 90 82 72
ECP34 2S4 C 349 12 DSR 115 109 105 95 84
ECP34 1M4 C 370 12 DSR 143 137 130 117 104
ECP34 2M4 C 388 12 DSR 154 148 140 126 112
ECP34 1L4 C 423 12 DSR 170 163 155 140 124
ECP34 2L4 C 440 12 DSR 187 178 170 155 136
ECO38 1S4 C 530 12 DSR 212 204 195 185 156
ECO38 2S4 C 573 12 DSR 235 224 213 197 170
ECO38 1M4 C 602 12 DSR 265 252 240 220 192
ECO38 2M4 C 692 12 DSR 297 284 270 250 216
ECO38 1L4 C 790 12 DSR 345 330 315 290 252
ECO38 2L4 C 930 12 DSR 408 388 370 340 296
ECO38 VL4 C 957 12 DSR 419 398 380 349 304
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 768 731 710 650 568
ECO40 VL4 C 1752 12 DER-1/A 885 844 820 755 656
ECO43 1S4 A 1920 12 DER-1/A 955 910 870 800 700
/ 800
ECO43 2S4 A 2140 12 DER-1/A 1071 1027 980 900 784
ECO43 1M4 A 2275 12 DER-1/A 1173 1124 1075 985 860
/ 460
ECO43 2M4 A 2370 12 DER-1/A 1310 1254 1200 1100 960
ECO43 2L4 A 2700 12 DER-1/A 1497 1430 1370 1256 1096
ECO43 VL4 A 2980 12 DER-1/A 1556 1505 1450 1325 1160
/ 400
ECO46 1S4 A 3005 12 DER-1/A 1707 1641 1580 1450 1313
ECO46 1.5S4 A 3375 12 DER-1/A 1852 1761 1710 1570 1368
ECO46 2S4 A 3560 12 DER-1/A 2054 1967 1900 1720 1520
230
ECO46 1L4 A 3805 12 DER-1/A 2373 2276 2200 2000 1760
ECO46 1.5L4 A 4255 12 DER-1/A 2578 2470 2385 2120 1908
ECO46 2L4 A 4375 12 DER-1/A 2810 2690 2600 2380 2080
ECO46 VL4 A 5120 12 DER-1/A 3136 3007 2900 2600 2320
ECO47LV 1M4 6400 4 DER-1/A 3240 3104 3000 2700 2400
ECO47LV 2M4 7000 4 DER-1/A 3726 3570 3450 3104 2760
ECO47LV 1L4 7700 4 DER-1/A 4320 4140 4000 3600 3200
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 35
380V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Standard - 12 Lead
RPM: 1800
Insulation: Class H
Volts
ECP28 1S4 C 87 12 DSR 13.7 12.9 12.5 11.6 10
ECP28 2S4 C 91 12 DSR 16.5 15.4 15 14.1 12
ECP28 3S4 C 97 12 DSR 19.3 18 17.5 16.5 14
/ 380
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
/ 220
ECP28 VL4 C 142 12 DSR 33 31 30 26 24
ECP30 1M4 C 105 12 DSR 22 20.5 20 18.5 16
/ 190
ECP30 2M4 C 118 12 DSR 27.5 26 25 23 20
ECP30 3M4 C 130 12 DSR 33 31 30 26 24
ECP30 1L4 C 148 12 DSR 38.5 36 35 30 28
110
ECP30 2L4 C 158 12 DSR 44 41 40 35 32
ECP32 1S4 C 153 12 DSR 41 39 37 35 29.6
ECP32 2S4 C 165 12 DSR 48 47 44 40 35.2
ECP32 1M4 C 186 12 DSR 55 53 50 48 40
ECP32 2M4 C 212 12 DSR 68 64 62 57 49.6
ECP32 1L4 C 244 12 DSR 82.5 80 75 67 60
ECP32 2L4 C 252 12 DSR 91 86 83 75 66.4
ECP34 1S4 C 302 12 DSR 96 93 88 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
ECP34 1M4 C 370 12 DSR 137 132 125 113 100
ECP34 2M4 C 388 12 DSR 148 143 135 122 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 263 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO38 VL4 C 957 12 DSR 380 370 360 329 288
1 of 2
Volts
ECO40 3L4 C 1536 12 DER-1/A 746 710 690 632 552
ECO40 VL4 C 1752 12 DER-1/A 824 785 763 700 610
ECO43 1S4 A 1920 12 DER-1/A 920 880 840 765 670
/ 760
ECO43 2S4 A 2140 12 DER-1/A 1038 996 950 871 760
ECO43 1M4 A 2275 12 DER-1/A 1140 1093 1045 957 836
/ 440
ECO43 2M4 A 2370 12 DER-1/A 1278 1223 1170 1072 936
ECO43 2L4 A 2700 12 DER-1/A 1442 1379 1320 1210 1056
ECO43 VL4 A 2980 12 DER-1/A 1502 1453 1400 1280 1120
/ 380
ECO46 1S4 A 3005 12 DER-1/A 1675 1610 1550 1420 1240
ECO46 1.5S4 A 3375 12 DER-1/A 1830 1740 1690 1550 1350
ECO46 2S4 A 3560 12 DER-1/A 2000 1915 1850 1705 1480
220
ECO46 1L4 A 3805 12 DER-1/A 2330 2235 2160 1980 1730
ECO46 1.5L4 A 4255 12 DER-1/A 2540 2435 2350 2155 1880
ECO46 2L4 A 4375 12 DER-1/A 2780 2660 2570 2355 2060
ECO46 VL4 A 5120 12 DER-1/A 3080 2950 2850 2550 2280
ECO47LV 1M4 6400 4 DER-1/A 3158 3026 2925 2632 2340
ECO47LV 2M4 7000 4 DER-1/A 3540 3392 3278 2950 2622
ECO47LV 1L4 7700 4 DER-1/A 4104 3932 3800 3420 3040
2 of 2
On ECO40, ECO43, ECO46 and ECO47 the standard connection is parallel star. For any different configuration please consult Meccalte
representative”.
nt
responses and overload ability. It is therefore recommended to visit the http://support.meccalte.com website and the DDS area
specifically to produce a custom datasheet for the voltage requested. In this way you are assured of the correct performances.
RATINGS BOOK | 37
380V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Special - Dedicated - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 39
600V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Special - Dedicated - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
ECO46: Refer to factory before ordering to assure winding is available at 600 Volts at the indicated rating.
RATINGS BOOK | 41
690V
4 Pole | 60Hz | 3Phase | 0.8 PF | AVR Controlled
Winding: Special - Dedicated - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
ECO46: Refer to factory before ordering to assure winding is available at 600 Volts at the indicated rating.
RATINGS BOOK | 43
220V - 230V - 240V
4 Pole | 60Hz | 1Phase | 1 PF | AVR Controlled
Winding: Standard - Reconnected - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
PARALLEL DELTA
ECO40 3S4 C 1208 12 DER-1/A 300 283 275 245 220
ECO40 1L4 C 1323 12 DER-1/A 313 305 290 264 232
ECO40 2L4 C 1458 12 DER-1/A 330 315 305 275 244
ECO40 3L4 C 1536 12 DER-1/A 350 340 330 307 264
ECO40 VL4 C 1752 12 DER-1/A 430 410 400 375 320
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 45
220V - 230V - 240V
4 Pole | 60Hz | 1Phase | 0.8 PF | AVR Controlled
Winding: Standard - Reconnected - 12 Lead
RPM: 1800
Insulation: Class H
1 of 2
PARALLEL DELTA
ECO40 3S4 C 1208 12 DER-1/A 286 270 262 233 210
ECO40 1L4 C 1323 12 DER-1/A 296 286 272 248 218
ECO40 2L4 C 1458 12 DER-1/A 312 295 286 258 229
ECO40 3L4 C 1536 12 DER-1/A 335 316 307 286 246
ECO40 VL4 C 1752 12 DER-1/A 416 392 382 358 306
2 of 2
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 47
240V
4 Pole | 60Hz | 1Phase | 1 PF | AVR Controlled
Winding: Dedicated - 4 Lead
RPM: 1800
Insulation: Class H
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
RATINGS BOOK | 49
LT3N
2/4 Pole | 50/60Hz | 1Phase | 1 PF
Winding: Standard - 4 Lead
RPM: 1500/1800
Insulation: Class H
Brushless capacitor excited machines specifically for Metal Halide light tower lamps.
For custom voltages or non-standard lamp striking voltages, please refer to Factory.
All the generators on this page come ‘standard’ with the DSR AVR
For other cominations of voltages/frequencies please consult our online DDS system.
RATINGS BOOK | 51
NPE
2 Pole | 50/60Hz | 1 & 3Phase
Winding: Various
RPM: 3000/3600
Insulation: Class H
All the generators on this page come ‘standard’ with the DSR AVR
Custom engineered models are available to fit special applications. Consult Factory.
RATINGS BOOK | 53
HC Alternator
14/20/24/26 Pole | 400Hz | 3Phase | 0.8 PF
Winding: Standard - 115/200V | 208V - 6/12 Lead
RPM: 3428/2400/2000/1848
Insulation: Class H
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
UVR6/1-H400B AVR has under frequency, over voltage protection, 3ph reference; regulation is +/- 1%.
Line Drop Compensator is also available as an option.
Custom projects available for dedicated power nodes.
The following accessories are available upon request for an additional charge:
Space Heaters
Temperature detectors (thermistors or PT100) for stator windings and bearings.
IP45 or IP54 rated enclosure.
Remote voltage control.
2/3 pitch windings with skewed slots for maximum reduction of harmonic content.
TOTAL+ treatment standard from HCP32 up to HCO38.
4 layers of polyester in addition to a clear varnish and EG43 overcoat on the main and exciter windings is standard
on 400 Hz machines.
RATINGS BOOK | 55
Portable
2 Pole | 50/60Hz | 1Phase | 1 PF
Winding: Standard - 230V/240V - 4 Lead
RPM: 3000/3600
Insulation: Class H
Above machines are brushless with capacitior control and optional AVR.
2 Pole | 3Phase (AVR) kVA @ 0.8 PF, 50Hz kVA @ 0.8 PF, 60Hz
MODEL WEIGHT (kg) 230/400 V %EFF 277/480 V %EFF
ET16F-130 30 5.5 80.2 6.6 80.6
ET16F-160 34 6.5 82.3 7.8 82.5
ET20FS-130 44.2 9 81.9 11 83.6
ET20FS-160 51.2 11.5 82.4 14 83.9
ET20F-200 59 13.5 82.9 16.5 84.1
RATINGS BOOK | 57
50Hz
Connections
Wiring Diagram
Three Phase
50Hz Series 3, 28, 31, 32, 34, 38 Series 40, 43, 46
L1
1
L-L 380 400 415 440 760 800 830 880
2
Series Star 4
3
N
12
11 8
10
L3
9 7
6 L2
L-N 220 230 240 254 440 460 480 508
5
L1
1 3 L-L 190 200 208 220 380 400 415 440
Parallel Star N
2 4
12 6
L3
11 10 8
7
5
L2
L-N 110 115 120 127 220 230 240 254
9
L1
12 1
L-L 220 230 240 254 440 460 480 508
11 2 M
Series Delta 10 3
L1
10 1
12 3
Parallel Delta L-L 110 115 120 127 220 230 240 254
9 11 4 2
8 7
L3 6 5 L2
L1 1
2
12
L-L 330 346 360 380 660 690 720 760
N
Zig-Zag (*) 7
11 L2
8 3 5
10
46
L-N 191 200 208 220 380 400 415 440
L3 9
8 9
L-L 440 460 480 508 880 920 960 1016
Single Phase 6
7 10
11
Series High
5 12
Zig-Zag L2 M L1
4 3 2 1 L-M 220 230 240 254 440 460 480 508
8
6 11
9 L-L 220 230 240 254 440 460 480 508
Single Phase 7 10
5 12
Parallel Zig-Zag 2 1
L2 M L1
4 3 L-M 110 115 120 127 220 230 240 254
8 11 6 9
L-L 220 230 240 254 440 460 480 508
Single Phase
Double Delta 7 12 10
5
(**) 4 3 2 1 L-M 110 115 120 127 220 230 240 254
L2 L1
M
1 2
Parallel L1
3 4
L2
L-L 110 115 120
In case of single phase load, it is important that the phase current does not exceed the nominal value.
(*) Rated power must be multiplied by 0.866.
(**) Half of rated power is obtainable when connecting between L1-M or L2-M.
Three Phase
60Hz Series 3, 28, 31, 32, 34, 38 Series 40, 43, 46
L1
1
L-L 415 440 460 480 830 880 920 960
2
Series Star 4
3
N
12
11 8
10
L3
9 7
6 L2
L-N 240 254 266 277 480 508 530 554
5
L1
1 3 L-L 208 220 230 240 415 440 460 480
Parallel Star N
2 4
12 6
L3
11 10 8
7
5
L2
L-N 120 127 133 139 240 254 266 277
9
L1
12 1
L-L 240 254 266 277 480 508 530 554
11 2 M
Series Delta 10 3
L1
10 1
12 3
Parallel Delta L-L 120 127 133 139 240 252 266 277
9 11 4 2
8 7
L3 6 5 L2
L1 1
2
12
L-L 359 380 400 415 720 760 800 830
N
Zig-Zag (*) 7
11 L2
8 3 5
10
46
L-N 207 220 230 240 415 440 460 480
L3 9
8 9
L-L 480 508 532 554 880 920 960 1108
Single Phase 6
7 10
11
Series High
5 12
Zig-Zag L2 M 4 L1
3 2 1 L-M 240 254 266 277 440 460 480 554
9
8
6 11 L-L 240 254 266 277 440 460 480 554
Single Phase 7 10
5 12
Parallel Zig-Zag 2 1
L2 M L1
4 3
L-M 120 127 133 139 220 230 240 277
8 11 6 9
L-L 240 254 266 277 440 460 480 554
Single Phase
7 12 10
Double Delta 5
(**) L2
4 3 2 1
L1 L-M 120 127 133 139 220 230 240 277
M
1 2
Parallel L1
3 4
L2
L-L 110 115 120
In case of single phase load, it is important that the phase current does not exceed the nominal value.
(*) Rated power must be multiplied by 0.866.
(**) Half of rated power is obtainable when connecting between L1-M or L2-M.
RATINGS BOOK | 59
SAE Flywheel
Housing Dimensions
Mounting Arrangements
2 447,7 (17 5/8) 466,7 (18 3/8) 489 (19.25) 12 M10 (3/8)
3 409,6 (16 1/8) 428,6 (16 7/8) 451 (17.75) 12 M10 (3/8)
4 362 (14.25) 381 (15) 403 (15 7/8) 12 M10 (3/8)
5 314,3 (12 3/8) 333,4 (13 1/8) 356 (14) 8 M10 (3/8)
XG
S.A.E. Flywheel Dimensions, mm (in)
Flywheel A B C XG Holes Size
21 584,2 (23) 641,35 (25.25) 673,1 (26.5) 0 12 M16 (5/8)
18 498,5 (19 5/8) 542,35 (21 3/8) 571,5 (22.5) 15,7 (5/8) 6 M16 (5/8)
14 409,6 (16 1/8) 438,15 (17.25) 466,72 (18 3/8) 25,4 (1) 8 M12 (1/2)
A B C
11 1/2 314,3 (12.375) 333,37 (13.125) 352,42 (13 7/8) 39,6 (1 9/16) 8 M10 (3/8)
10 276,2 (10 7/8) 295,27 (11 5/8) 314,32 (12 3/8) 53,8 (2 1/8) 8 M10 (3/8)
8 225,4 (8 7/8) 244,47 (9 5/8) 263,52 (10 3/8) 62 (2 7/16) 6 M10 (3/8)
7 1/2 206,4 (8 1/8) 222,25 (8.75) 241,3 (9 1/2) 30,2 (1 3/16) 8 M8 (5/16)
6 1/2 184,2 (7.25) 200 (7 7/8) 215,9 (8 1/2) 30,2 (1 3/16) 6 M8 (5/16)
RATINGS BOOK | 61
NOTES
T: +1 815 344 0530 T. +49 (0)831 540755 0 T: +61 (0) 8 8349 8422
E: info@meccalte.us E: info@meccalte.de E: info@meccalte.com.au
www.meccalte.com