Professional Documents
Culture Documents
RW_en_8_450_250_LR27H
RW_en_8_450_250_LR27H
Technical features
Medium: Inlet pressure: Hysteresis & repeatability: Materials:
Oil free, dry air filtered to 25 µm 10 bar (145 psi) Typically < 0,05% at mid range Body: passivated zinc die cast-
Note: for use with gases other At least 0.2bar (3 psi) above Air Consumption: ing,
than compressed air please output pressure Typically < 4,0 l/min black powder coated
consult NORGREN Air and gauge ports: Ambient/Media temperature: Pilot operator and sub base
Operation: G1/4 or 1/4 NPT -40 ... +70°C (-40 ... +158°F) interface plate are anodised
Optional - see option selector Flow capacity: Air supply must be dry enough aluminium, black powder
for details Up to 1500 l/min to avoid ice formation at tem- coated
Working pressure range: Sensitivity: peratures below +2°C (+35 °F). Elastomers: reinforced nylon
1 ... 8 bar (15 ...120 psi) Better than 0,3 mbar per bar of Pressure capsule: beryllium
supply pressure change. copper
Technical data, standard version, left relief port position with filter
Symbol Port Actuated Gauge Weight Model
size (kg)
G1/4 Manual Without 0,890 LR27H-200-RNLG-S1
1/4 NPT Manual Without 0,890 LR27H-200-RNLA-S1
Our policy is one of continued research and development. We therefore reserve the right to amend, 02/21
without notice, the specifications given in this document. (2013-B5166d) © 2020 Norgren Ltd RW/en 8.450.250.01
Option selector LR27H˙-˙˙˙-RNL˙-˙˙
4 1 4
1 3 1 3
Flow characteristics
Forward flow (Inlet pressure 10 bar) Relief flow (Inlet pressure 10 bar)
bar bar
9 9
8 8
7 7
Outlet pressure
Outlet pressure
6 6
5 5
4 4
3 3
2 2
1 1
0 0
0 200 400 600 800 1000 1200 1400 1600 0 200 400 600 800 1000
Nl/min Nl/min
Flow Flow
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 8.450.250.02 without notice, the specifications given in this document. (2013-B5166d) © 2020 Norgren Ltd 02/21
Accessories
Gauge ISO G NPT port Exhaust filter
(for full technical port
specification see
page
N/rw/en
8.900.900/920
Series
Pressure range Model
Port size Diameter (bar) (psi) Series Model
LR27H (ISO G port) R 1/8 40 mm 0 ... 10 0 ... 140 18-015-989 * LR27H (ISO G port) M/1512
LR27H (NPT port) 1/4 PTF 2“ 0 ... 11 0 ... 160 18-015-209 LR27H (NPT port) MV002A
* Please order a BSP connector 160232818 (G1/4 o/f to G1/8 i/f) separately
Dimensions Dimensions in mm
Projection/First angle
Standard (typical for other inline versions)
23
9 ø 35
11 4
< 40
19 5
8
80
14
Our policy is one of continued research and development. We therefore reserve the right to amend,
02/21 without notice, the specifications given in this document. (2013-B5166d) © 2020 Norgren Ltd RW/en 8.450.250.03
Sub base version Pilot operated Gearbox operated Dimensions in mm
Projection/First angle
13
14 11
11 4
< 50
12
42
19 5
21
13
54
1 ø24 ø14,4 2
2,5
21
ø 35
< 40
31,5
19
25,5
80
ø12
1 Inlet port, 2,1 mm deep
2 Working port, 2,1 mm deep
8
54
69
84
Warning
These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes of all
and rail transport systems only. Do not use these products where component parts used in fluid power systems and to provide
pressures and temperatures can exceed those listed under adequate safeguards to prevent personal injury or damage to
»Technical features/data«. equipment in the event of such failure.
Before using these products with fluids other than those specified, System designers must provide a warning to end users in the
for non-industrial applications, life-support systems or other system instructional manual if protection against a failure mode
applications not within published specifications, consult cannot be adequately provided.
NORGREN. System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with
Through misuse, age, or malfunction, components used in fluid these products.
power systems can fail in various modes.
Our policy is one of continued research and development. We therefore reserve the right to amend,
RW/en 8.450.250.04 without notice, the specifications given in this document. (2013-B5166d) © 2020 Norgren Ltd 02/21