Professional Documents
Culture Documents
TLE-TVL_IA_EIM_911_q4_clas1_Install-Telephone-Terminal-Cabinet_V3-1
TLE-TVL_IA_EIM_911_q4_clas1_Install-Telephone-Terminal-Cabinet_V3-1
TLE-TVL_IA_EIM_911_q4_clas1_Install-Telephone-Terminal-Cabinet_V3-1
NAME:__________________________________________
GRADE/SECTION:______________________________
TLE/TVL
Electrical Installation
and Maintenance
Quarter IV – Week 1, 2, 3, & 4
Install Telephone Terminal Cabinet
CLAS
TLE/TVL – Electrical Installation and Maintenance - Grade 9/11
Contextualized Learning Activity Sheets (CLAS)
Quarter IV – Week 1, 2, 3 & 4: Install Telephone Terminal Cabinet
First Edition, 2020
Republic Act 8293, Section 176 states that : No copyright shall subsist in
any work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for the
exploitation of such work for a profit. Such agency or office may, among other
things, impose as a condition the payment of royalties.
Management Team:
Servillano A. Arzaga, CESO V, SDS
Loida P. Adornado PhD, ASDS
Cyril C. Serador PhD, CID Chief
Ronald S. Brillantes, EPS-LRMS Manager
Marie Vic C. Velasco PhD, EPS-Mathematics
Angelica C. San Jose PSDS
Eva Joyce C. Presto, PDO II
Rhea Ann A. Navilla, Librarian II
Learning Competencies:
LO 3. Install telephone terminal cabinet (TLE_IAEI9-12RC-IVa-e-3)
3.1 Prepare tools/equipment and materials needed for the installation of telephone
terminal cabinet in line with job requirement.
3.2 Install telephone terminal cabinet according to the job requirements following
PEC and NEC
3.3 Observe safety procedure in installing telephone terminal cabinet according to
OHS guidelines and procedures.
Learning Objectives:
1. Identify tools/equipment and materials needed for the installation of telephone
terminal cabinet in line with job requirement
2. Explain the functions of tools/ equipment and materials for the installation of
telephone terminal cabinet
3. Install telephone terminal cabinet according to the job requirements following PEC
and NEC
Let’s Try
4. Observe safety procedure in installing telephone terminal cabinet according to OHS
guidelines and procedures
Directions : Read each question carefully. Circle the letter of the correct answers.
1. What small hand tool does the network technicians use to insert the wire into insulation-
displacement connection on punch down blocks, patch panel, keystone modules, and
surface mount boxes??
• Distribution Points – These are terminal boxes found at the end of the local underground cable
distribution , used to connect to the customer feed cables.
2
Prepare tools, material and equipment needed for installation of telephone cabinet in line
with job requirement
(Souce:“M ulti
meter Stock Photos,” Free Royalty, accessed May 7,
2021https://thumbs.dreamstime.com/z/electronic-
multimeter-11218958.jpg.)
3
7. Pliers- Used by linemen, electricians, 8. Diagonal pliers- (or wire cutters or
and other tradesmen primarily for diagonal cutting pliers or diagonal cutters)
gripping, twisting, bending and cutting are pliers intended for the cutting of wire.
wire, cable and small metalwork
components.
hacksaw-white-background-image43598939.)
PBX -stands for Private Branch Exchange, which is a private telephone network used within a
company or organization. The users of the PBX phone system can communicate internally
(within their company) and externally (with the outside world), using different communication
channels like Voice over IP, ISDN or analog.
Main Distribution Frame- A wiring rack that connects outside lines with internal lines. It is
used to connect public or private lines coming into the building to internal networks. In a telco
central office (CO), the MDF is generally in close proximity to the telephone switch.
4
Steps/Procedures in telephone terminal cabinet Installation
1. Fixing bonding and grounding to the back 4. Connecting the telephone cable line to the
amount frame output of 10 pair disconnection module
Fix the back mount frame in a vertical position on - Use a punch down tool to terminate the
the MDF/PBX and ensure a safe earth connection cables to the output of 10 Pair disconnection
is established, through the bus bars. module.
2. The combined color and pairs in a telephone 5. Testing each phone line
cable
-Try dialing on each phone that is installed
-Use telecom color code chart to avoid confusion to find out if it works.
in connecting telephone cables of different colors
5
4. One isolated 20 Amp breaker circuit is extended to plywood backboard inside the cabinet is to
be provided.
5. All access handles to accommodate a padlock.
6. A maximum on three-foot radius 90-degree bends are allowed in each pulling section.
Directions : Match the name of the tools in Column A with its corresponding picture in
Column B. Write your answer on the space provided before the number.
COLUMN A COLUMN B
_____1. Wrench a.
_____3. Multi-Tester c.
_____5. Hacksaw e.
6
Which of the following tools do you have in your home ?
Let’s Do More
___________________________________________________________________________________________
7
Complete me
Directions: Finish the maze below by providing the step on how to Install
telephone terminal cabinet according to the job requirements.
START
1. Fixing bonding and
grounding to the back
mount frame
2.
3.
5. 4.
FINISH
Let’s Sum It Up
______________________________________________________________________________________________
Directions: Write TRUE if the statement is correct and FALSE if the statement is wrong.
_________1. Wear proper personal protective device when you install a telephone terminal
cabinet.
_________2. Cabinets that should be used but must be approved by the authorities prior to
installation.
_________3. An area 4’ in front of the cabinet must be kept clear for technician access
_________4. One isolated 10 Amp breaker circuit is extended to plywood backboard inside
the cabinet is to be provided.
_________5. Fixing bonding and grounding to the back mount frame.
Let’s Assess
8
Answer Key
Directions : Read each question carefully. Circle the letter of the correct answers.
1. What small hand tool does the network technicians use to insert the wire into insulation-
displacement connection on punch down blocks, patch panel, keystone modules, and
surface mount boxes?
A. Measuring Tape C. Punch down tool
B. Hammer D. Screwdriver
2. What tool is used to install and remove screws?
A. Measuring Tape C. Punch down tool
B. Hammer D. Screwdriver
3. Which of the following tools is a flexible ruler used to measure size or distance?
A. Measuring Tape C. Punch down tool
B. Hammer D. Screwdriver
4. What type of material used for the termination of telecommunications connections. The
module pairs are numbered 1 to 0 and feature style terminations. Testing is possible in
both directions and the disconnection contact on the front enables test access, measuring
and isolation?
A. Bonding and grounding C. 10 Pair disconnection module
B. Cables D. Junction box
5. Which of the following is used as the basis for safeguarding persons, buildings and its
contents from hazards that may arise from the use of electricity?
A. Association of Philippine Electrical Engineers
B. Philippine Electrical Code
C. Electrical safety Hazards
D. None of these
6. Which isolated breaker circuit extended to plywood backboard inside the cabinet is needed
in installing telephone cabinet?
A. 20 Amp C. 40 Amp
B. 30 Amp D. 50 Amp
7. Which of the following reasons clearly justifies the use of inside terminal room?
A. It allows for access to power for telephone equipment.
B. It allows for access to the main source of power.
C. It allows for access to the main electrical circuit.
D. None of these
8. Carlo is installing a telephone terminal cabinet and cutting phone cable. Which of the
following tools Carlo must not use?
A. Long-nose C. Punch down tool
B. Stripper Wire D. Scissors
9. What an EIM student like you must consider in doing Telephone Cabinet Installation?
A. Obey First C. Switch off the light
B. Safety First D. Safe and sound
10. What will happen when you connect the telephone cord to the 10 disconnection module?
A. To ensure proper flow of electricity
B. To switch off the light
C. To ensure safety
D. to power the telephone.
9
Lets Practice Lets Do More Let Sum It Up Assessment
Lets Try
Activity 1 Activity 1
1. D 1. Fixing bonding and 1. True 1.C
1. C grounding to the
back mount frame
2. C 2. The combined color 2. True 2. D
2. D and pairs in a telephone
cable
3. A 3. Connecting the 3. False 3. A
telephone cable line to
3. A
the input of 10 pair
disconnection module
4. E 4. Connecting the 4. False 4. C
telephone cable line to
4. C
the output of 10 pair
disconnection module
5.B 5. Testing each phone 5. True 5. B
5. B
line
6. A Activity 2 Activity 2 6. A
7. A 1. Hacksaw 1. 0 7. A
8. D 2. Pliers 2. 0 8. D
9. B 3. Wrench 3. Heart 9. B
10. D 4. Screwdriver 4. 0 10. D
5. Hammer 5. Heart
Module
References
10
Free Royalty. “Screwdriver isolated on White background.” Accessed May 7, 2021.
https://www.shutterstock.com/image-photo/slotted-screw-driver-phillips-yellow-colors-
1438267151.
Free Royalty. “Needle-nose Pliers are a hand tool.” Accessed May 7, 2021.
https://www.dreamstime.com/needle-nose-pliers-hand-tool-needle-nose-pliers-hand-tool-white-
background-image141383104.
Free Royalty. “Red pliers isolated in white background.” Accessed May 7, 2021.
https://www.dreamstime.com/stock-images-red-pliers-isolated-white-background-
image11330314
Free Royalty. “Close Up photo of a hacksaw on a white background.” Accessed May 7, 2021.
https://www.dreamstime.com/stock-photo-close-up-photo-hacksaw-white-background-
image43598939.
FEEDBACK SLIP
11
A. FOR THE LEARNER
Thank you very much for using this CLAS. This learner’s
material is aimed at ensuring your worthwhile learning through the
help of your family members. For feedback purposes, kindly answer YES NO
the following questions:
2. Were you able to follow the processes and procedures that were
indicated in the different learning activities?
3. Were you guided by anybody from your family while using this
CLAS?
4. Was there any part of this clas that you found difficult? If yes,
please specify what it was and why.
None
NAME OF SCHOOL:
Date Received:
Date Returned:
12
13