Professional Documents
Culture Documents
19 Sensor Photoelectric Photo
19 Sensor Photoelectric Photo
Photoelectric Sensors
Up-to-date price list:
www.automationdirect.com/pricelist
FREE Videos:
www.automationdirect.com/videos
In this interactive PDF you can:
FREE Documentation:
• Use bookmarks to navigate www.automationdirect.com/documentation
by product category
• Use bookmarks to save, FREE CAD drawings:
search, print or e-mail the www.automationdirect.com/cad
catalog section
• Click on part #s to link
directly to our online store
for current pricing, specs,
stocking information and
more
How do these
Type Advantages Disadvantages sensors benefit me?
Everybody wants to know how a
Through-beam · Most accurate · Must install at two points on
particular product will help them. With
· Longest sensing range system: emitter and receiver
· Very reliable · Costly - must purchase both AutomationDirect photoelectric
emitter and receiver sensors, you benefit from:
.00
from • Measuring ranges up to 100
$295
meters
Quick-disconnect cables and acces-
sories
Quick-disconnect cables, reflectors, mounting brackets
and other accessories available include:
• Micro (12mm) and pico (8mm) Q/D sizes from • Round and rectangular reflectors in many sizes
2m to 15m • Photoelectric shutters that focus your
photoelectric sensor on small targets
• Extension cables for quick-disconnect sensors
• Right-angle adapters for special mounting
• LED sensor cables for signal confirmation applications
$76.0 $21.5
5 mm, C5 Series, 18 mm IP69K, FF & FFRS series 18 mm Non-metal, SS/MS/MV,MQ,
and 8 mm, HE Series • Power: 10-30 VDC FB and FA series
• Power: 10-30 VDC • M12 Q/D • Power: 10-30 VDC or 20-250 VAC
• Embedded cable or M8 Q/D • Diffuse, Polarized reflective, • Embedded cable or M12 Q/D
• 3-wire, NPN or PNP output Through beam, Retro-reflective • 4-wire, NPN or PNP output,
• Fixed sensitivity • Suitable for harsh environments LO/DO selectable
• Fixed sensitivity
from
0
$40.0
.00
from
0
from
0
$35.0
• NPN or PNP, Light-on, from output, LO/DO selectable
0 $42.0
from
$39.0
Dark-on output models DC Rectangular, FM series • Adjustable sensitivity
• M12 quick-disconnect • 316L stainless steel
housing
• IP69K
• Embedded cable DIN Rail Fiber Amplifiers,
DC Rectangular, CX Series or M8 or M12 Q/D OPT, DFT, DFP Series with
• Embedded cable or M8 Q/D • 3-wire NPN or PNP Metal Jacket and Plastic
output Cuttable Fibers
• 3-wire, NPN or PNP
output • Power: 10-30 VDC
0
from • Adjustable sensitivity • Embedded cable or M8 Q/D
$48.5
• 4-wire, NPN or PNP output,
DC Compact Metal, FW Series LO/DO selectable
• 10 to 30 VDC
0
from
$79.0
• IO-Link compatible models
• 30 mm mount, metal, DC available
Fork Sensors • Diffuse models w/background
suppression: 300 Hz
• Visible Red Light and
Laser light options • Polarized retro-reflective
models: 1000 Hz
• LO/DO Selectable
0
from Area Sensors, CX and BX Series
$86.0
• Rugged metal one-piece from
0
$59.0
housing • Detection heights: 70, 160, 320,
• Models for clear object 480, 640, 800, and 960mm
detection • Detect parts as small as 1.5mm
• Operating distances up to 6m
• NO/NC selectable digital outputs
• Percent-blocked analog output
offered on select models
0 .00
from from
$45.5 $20p0air
Cutler-Hammer • Three-year warranty on CX
Enhanced 50 Series models
• Drop-in replacement • IP67 rating on BX models
for AB 9000 series 18 mm Fiber Amplifier, SSF Series
• Diffuse, retroreflective, • Power: 10-30 VDC Contrast Sensors, S8 & TL Series
through-beam • Embedded cable or M12 Q/D • RGB Light Emission
and clear object • 4-wire, NPN or PNP output, • Switching frequencies
detection up to 50kHz
LO/DO selectable from
0
0 $68.0
from
$61.0
• Teach auto calibration • PNP or NPN
Diffuse models: 1m Diffuse models: 300mm Diffuse models: 400mm Diffuse models: 100mm, 200mm, 400mm
Sensing Distances Reflective models: 3m Reflective models: 20m Reflective models: 2.5m Reflective models: 2m
Through-beam: 20m Through-beam: 50m Through-beam models: 8m Through-beam models: 8m
Output State Complementary N.O. / N.C. Complementary N.O. / N.C. Light-on, Dark-on N.O. / N.C. selectable
Logic Output NPN / PNP NPN / PNP NPN / PNP NPN / PNP
Connection Type Axial cable / M12 connector Axial cable / M12 connector M12 connector Axial cable / M12 connector
Supply Voltage 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC
Diffuse and reflective models: 800Hz Diffuse and reflective models: 250Hz
Switching Frequency 250Hz
Through-beam models: 1kHz
1kHz Though-beam models 25Hz
Diffuse: IEC IP65
Rating IEC IP67 IEC IP67 Retro-reflective and Thru-beam: IEC IP67
IEC IP67
Rating IEC IP67 IEC IP67 IEC IP68, IP69K IEC IP68, IP69K
Logic Output NPN / PNP/ receiver dependent NPN / PNP/ receiver dependent NPN / PNP NPN / PNP
Connection Axial cable / M12 connector M12 connector Axial cable / M8 connector Axial cable / M8 connector / 0.3 m cable
Type with M12 QD connector
Operating 10–36 VDC 10–30 VDC 10–30 VDC 10–30 VDC
Voltage
Diffuse models: 1kHz
Switching Diffuse models w/ background
suppression: 500Hz 1kHz 1kHz, 2kHz 1kHz
Frequency Retroreflective models:1kHz
Through-beam models: 1kHz
Rating IEC IP67 IEC IP67 IEC IP67 IEC IP 65, 67, 68, 69K
Logic Output NPN / PNP NPN / PNP PNP, NPN or Push-Pull PNP or PNP/NPN
Operating Voltage 10–30 VDC 10–36 VDC 18–30 VDC, 10–30 VDC 18–30 VDC, 10–30 VDC
Diffuse models: 1kHz
Switching Diffuse models w/ background
1kHz suppression: 500Hz 100Hz 50Hz, 250Hz, 1kHz
Frequency Retroreflective models: 1kHz
Through-beam models: 1kHz
Rating IEC IP67 IEC IP65 IEC IP67 IEC IP68
Specification DFT Series Fiber Amp DFP Series Fiber Amp OPT Series Fiber Amp
Compact rectangular plastic fiber optic amplifier Compact rectangular plastic fiber optic
Description with Teach operating distance function, DC amplifier, DC Fiber optic amplifiers. Single and multi-fiber units.
See Optical Fiber Tables following the See Optical Fiber Tables following the See Fiber Optic Cable tables following the
Sensing Distances amplifier’s specifications amplifier’s specifications amplifier’s specifications
Output State Light-on / Dark-on selectable Light-on / Dark-on selectable Light-on / Dark-on selectable
Logic Output NPN / PNP NPN / PNP NPN / PNP / Push Pull
OPT2040/OPT2041: M8 4 pole
Connection Type Axial cable / M8 connector Axial cable / M8 connector
OPT2042: M12 4 pole, M12 8 pole
OPT2040: 10-30 VDC
Supply Voltage 10 to 30 VDC 10 to 30 VDC OPT2041: 18-30 VDC
OPT2042: 18-30 VDC
OPT2040: 2kHz
Switching Frequency 1.5 kHz 1.5 kHz OPT2041: 4kHz
OPT2042: 2kHz
OPT2040: IEC IP65
OPT2041: IEC IP65
Rating IEC IP64 IEC IP64
OPT2042: IEC IP50
OPT2043: IEC IP50
Specification SSF Series Fiber Amp OPT Series Plastic Fibers OPT Series Glass Fibers
Cuttable diffuse reflection and through-beam fiber Glass fiber optic cables diffuse reflection and
Description 18mm plastic fiber optic amplifier, DC optic cables (2.2 mm diameter) through-beam (1.6 mm Diameter)
See Optical Fiber Tables following the amplifier’s Amplifier dependent. Refer to fiber optic tables for Amplifier dependent. Refer to Fiber Optic
Sensing Distances specifications sensing distances. tables for sensing distances.
Connection Type Axial cable / M12 connector Amplifier dependent Amplifier dependent
Selectable light on/dark on. Analog NO/NC configurable NO/NC configurable, 0-10V,
Output State output on select models. 4-20mA analog out
Selectable N.O / N.C.
(1) 4-pin and (1) 5-pin M12 (1) 4-pin and (1) 8-pin M12
Connection Type M12 Connector quick-disconnect quick-disconnect
M12 connector
TL46-W - 15 kHz 12.3 Hz – 280 Hz, depending on 12.3 Hz – 280 Hz, depending on
Switching Frequency TL46-WL - 20 kHz model. model.
N/A
TL46-WJ - 50 kHz
Rating IEC IP67 IEC IP67 IEC IP67 IEC IP67
Wiring diagrams
Diagram 1 Diagram 2 Diagram 3
NPN Output PNP Output Emitter
Dimensions
mm
Figure 1 Figure 2
white paper
gray paper
Chart 3 (Throughbeam)
Cable Assembly Wiring Colors: 2-meter Axial Cable version: check is black
M12 Connector: check is Pin 2 (white).
Pin 1 - Brown Check input: This condition simulates the presence of a
Pin 2 - White Switching Element Function target within the detection range and forces the receiver
output to switch. If switching does not occur, it indicates
Pin 3 - Blue Thru-Beam and
Pin 4 - Black
Reflective Models Diffuse Models a fault in the system.
Connector
M12 connector
Dimensions
mm [inch]
Figure 1 Figure 2
Figure 3 Figure 4
IMPORTANT NOTE
The Laser Classification Systems for the standards IEC (EN) 60825-1 defines the following safety classes:
Class 1
This class is eye-safe under all operating conditions.
Class 2
These are visible lasers. This class is safe for accidental viewing under all operating conditions. However,
it may not be safe for a person who deliberately stares into the laser beam for longer than 0.25 s, by
overcoming their natural aversion response to the very bright light.
RL110
White 90%
RL201
Grey 18%
RL100D
Black 6%
100
Excess Gain
Excess Gain
10.0
10
1.0 1
0 50 100 150 200 250 300 350 400 0 5 10 15 20 25 30 35
d [mm] d [ mm]
4 40
3 30
2 20
Spot dimension [mm]
Spot dimension [mm]
1 10
0
0
-10
-1
-20
-2
-30
-3
-40
-4
-50
-5
0 5 10 15 20 25 30 35
0 50 100 150 200 250 300 350 400
d [m]
d [mm]
5
Displacement [mm]
Displacement [mm]
0 0
-2
-5
-4
-10
-6
-15
-8
-20
-10
0 50 100 150 200 250 300 350 400 0 5 10 15 20 25 30 35
d [mm]
d [m]
Black 6%
100
10
Excess Gain
10 5
0
0 10 20 30 40 50 60 70 80 90 100
1 d [mm]
0 10 20 30 40 50
d [m]
FALS-**-*E
FALH-**-0* - FALD-**-** FALW-**-*E
Spot dimension Spot Dimension
4
100
80 3
60 2
Spot dimension [mm]
40 1
Spot dimension [mm]
20
0
0
-1
-20
-2
-40
-3
-60
-4
-80 0 50 100 150 200
d [mm]
-100
0 10 20 30 40 50
d [m]
15
40
Displacement [mm]
20
10
0
-20
-40 5
-60
-80 0
0 10 20 30 40 50 60 70 80
-100 d [mm]
0 10 20 30 40 50
d [m]
FALW -**-1E
Reduction of sensing distance
20
Black 6%
Grey 18%
Reduction of sensing distance [mm]
15
10
0
0 30 60 90 120 150
d [mm]
FALW -**-3E
20
Reduction of sensing distance
Black 6%
Grey 18%
Reduction of sensing distance [mm]
15
10
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
d [mm]
Wiring Diagrams
Diagram 1 Diagram 2 Diagram 3
NPN Output PNPN Output
Connector
M12 Connector
Switching Element Function
Thru-Beam and
Reflective Models Diffuse Models
Light-on N.C. N.O.
Dark-on N.O. N.C.
Notes: 1 With standard diameter 84mm RL110 reflector. Purchase reflectors separately.
2 An emitter and receiver pair must be ordered for a complete sensor set.
Factor
Gain
units
Distance in millimeters
† Check function
Switching Element Function
Thru-Beam and
Reflective Models Diffuse Models
*Purchase reflectors separately.
**Purchase one receiver and one emitter for a complete set.
Light-on N.C. N.O.
Dark-on N.O. N.C.
Wiring Diagrams
Diagram 1 Diagram 2 Diagram 3 Connector
Emitter with check Input M12 connector
NPN Output PNP Output
Dimensions
in/mm
Figure 1 Figure 2
M18x1
M12x1
M18x1
Distance Y (mm)
10
--10
1 --20
0 1000 2000 3000 0 1000 2000 3000
Distance (cm) Distance x (cm)
Chart Set 5 (Through-Beam)
Wiring diagrams
Diagram 1 Diagram 2 Connector
M12 Connector
NPN Output PNP Output
Figure 1 Figure 2
M12x1
M18x1
M18x1
Characteristic curves
Chart 1 (MS0) Chart 2 (MS1)
Background suppression Background suppression
100 100
Gain
Gain
White 90%
White 90%
10 10
Wiring Diagrams
Connector
Diagram 1 Diagram 2 M12 Connector
NPN Ouput PNP Ouput
Diagram 3 Diagram 4
NPN Ouput PNP Ouput
NO Light ON
NC Dark ON
Black-White Differential
Graph
This graph shows the difference in
distance between where the FARS
series sensors detect a 90% reflec-
tive white card, versus a 6% reflec-
tive black test card under the same
conditions. As the adjoining graph
illustrates, the FARS series sensors
provide practically a zero millimeter
difference between the white and
black target at a setup distance of
80 mm, 3 mm difference at a setup
distance of 100 mm and 10 mm for
a setup distance of 130 mm.
Dimensions
Dimensions
(mm)
60°
Jet
Jet for 30
seconds
from each
angle
30°
100
0 to 150 mm
mm
( 4 – 6
( 6))
0°
Delivery
livery rate:: 14 – 16 I/min
ater pressu
Water ure: 80 – 100 bar
pressure:
( 1100 – 15 500 psi)
1500
Ro
otatiion at
Rotation at 5 rpm
Overview
FDA certified Materials
IP69K high-pressure cleaning test
The ADC Food & Beverage sensors are manufactured from
The ADC Food and Beverage products were tested in accor- materials capable of withstanding solutions used during
dance with the IP69K standard, according to DIN 40050 part equipment cleaning. These materials are all approved by the
9. The goal of this test was to duplicate pressure cleaning FDA for use in food production environments:
conditions on a plant floor. In the test fixture, the sensors were • 316L (V4A) stainless steel
exposed to a 1500 psi spray of water at a temperature of 176
• PMMA (acrylic)
˚F. The duration of each cleaning cycle was 30 seconds. The
• PEEK (Polyether Ether Ketone)
test was performed at specified angles using a spray nozzle
located at a distance of 4” from the switch.The sensors with- • PPS (Techtron)
stood test conditions and were still operable, providing 100% Third Party chemical testing companies such as ECOLAB and
of sensing range. Johnson Diversey have tested these products with common
cleaning agents, such as P3-clint KF and P3-topax 52, to
Thermal endurance assure continued operation.
In pressure cleaning environments, proximity and photo
sensors can be exposed to extreme temperature conditions.
A thermal shock test was performed on the proximity sensors
by cycling the temperature to ensure their consistent high reli-
ability. All proximity and FFRS photoeyes can withstandtem-
peratures up to 100°C (212°F).
NOTES:
Switching Element Function
† Check function
*Purchase reflectors separately.
Thru-beam and Diffuse Reflective
Reflective Models Models
**Purchase one receiver and one emitter for a complete set.
Light on N.C. N.O.
• Sensors without sensitivity adjustment
Dark on N.O. N.C.
Diagram 1 Diagram 2
NPN Ouput PNP Ouput
Diagram 3 Diagram 4
NPN Ouput PNP Ouput
Diagram 5 Diagram 6
Gain
10 -5
-30
-10 Kodak Gray paper 18%
Kodak Gray paper 18%
Kodak gray paper 18%
1 -15 0 -60
0 10 20 30 40 0 10 20 30 40
0 2 4 6 8 10 0 2 4 6 8 10
Distance (cm) Distance (cm) Distance (cm) Distance (cm)
Distance (mm)
100
20
RL110-P80 10
10 0 10 0
Gain
Gain
-10
RL 100-D -20
-100 Grey -30
Kodak 18% -40
Kodak gray paper 18%
-50
0 -200 1 -60
0 20 40 60 80 100 0 20 40 60 80 100 0 1 2 3 4 5
0 1 2 3 4
Distance (cm) Distance (cm) Distance (m) Distance (m)
Distance (mm)
10 20 100
10 50
0 10 0
Gain
Gain
-10 -50
1
-20 -100
1
-30 -150
-40 -200
0 -50 0 -250
0 1 2 0 5 10 15 20 25 30 0 5 10 15 20 25 30
0 1 2
Distance (m) Distance (m) Distance (m) Distance (m)
Dimensions
mm(in)
N.O. Light ON
Wiring Diagrams N.C. Dark ON
Diagram 1 Diagram 2
Connector
NPN Ouput PNP Ouput
M12 Connector
Diagram 3 Diagram 4
NPN Ouput PNP Ouput
30
5
25
90% / 6%
20
0
Distance (mm)
Distance (mm)
15
90% / 18%
10 -5
5 90% / 90%
0 -10
0 40 80 120 160
0 40 80 120 160
Distance (cm) Distance (cm)
90% / 6% w. halo
15 5
w/o. halo
10 0
Distance (mm)
Distance (mm)
90% / 18%
w/o. halo
5 -5
0 -10
50 60 70 80 90 100 110 0 20 40 60 80 100 120
Distance (cm) Distance (cm)
Dimensions
mm(in)
NO Light ON
WH/2 Open Light-on
NC Dark ON
L1 Dark-on
Characteristic Curves
MQ0-00-0E
MQ1-00-0E
Dimensions
(mm)
Dimensions
*Purchase reflectors separately. **Purchase one receiver and one emitter for a complete set.
Wiring diagrams
Diagram 1 Receiver Diagram 2 Emitter Connector
M12 Connector
1 1
N N
Dimensions
(mm)
Figure 1 Figure 2
1
MV2 models: 100mm
Sensing Distance MV4 models: 200mm1 3m
3
16m
2
MV6 models: 400mm
Chart 5 (Through-beam)
Wiring diagrams
Diagram 1 Diagram 2 Diagram 3
NPN output PNP output Emitter
Connector
M8 Connector
Wiring diagram
Diagram 1 Diagram 2 Diagram 3
NPN output PNP output Emitter
Connector
M8 Connector
*Purchase reflectors separately. **Purchase one receiver and one emitter for a complete set.
Wiring diagrams
Diagram 1 Diagram 2 Diagram 3
NPN Output PNP Output Emitter with check Input
Sensitivity Teach function (see product data sheet for details) Fixed
Output Type NPN or PNP - Light on / Dark on selectable
Operating Voltage 10-30VDC
No-load Supply Current m20mA
Operating (Load) Current m100mA
Off-state Leakage Current m10µA
Voltage Drop 2V max at 100mA
Switching Frequency 400Hz 250Hz
Ripple m10%
Time Delay Before Availability (tv) 150ms
Short-Circuit Protection Yes, switch autoresets after load is removed
Operating Temperature -25 to +70°C (-13° to 158°F)
Protection Degree (DIN 40050) IEC IP67
LED Indicators - Switching Status Yellow
Housing Material Nickel-plated brass
Lens Material Poly methyl methacrylate (PMMA)
Shock/Vibration See terminology section
Tightening Torque 10 Nm (7.37 lb-ft)
Axial cable models: 54g (1.9 oz)
Weight M12 connector models: 18g (0.63 oz)
Connectors 2m (6.5’) axial cable; M12 (12mm) connector
Agency Approvals cULus F187310, CE
1With 100x100mm white matte paper
2 With 200x200mm white matte paper
3With standard Ø84mm RL110 reflector
4 Purchase reflectors separately.
5An emitter (DME) and receiver (DMR) pair must be ordered for a complete sensor set.
Dimensions
(mm)
66
Figure 1 Figure 2 2.5 34 22 6.5 1
2
M12x1
3
1
Diffuse optic
65.5
2 4.4 22.3 1
Reflective optic
LED
Sensitivity Adjustment
(Diffuse and Reflective only)
Switching Element Function (Diffuse and Reflective only)
Chart 4 (Through-beam)
Excess gain Parallel displacement Mutual interference
Distance (mm)
Distance (mm)
Gain
Wiring diagrams Warning: These products are not safety sensors and are not suitable for use in personal safety applications.
Diagram 1 Diagram 2
NPN Output PNP Output Connector
M12 Connector
Diagram 3 Diagram 4
4-Wire NPN Output 4-Wire PNP Output
Diagram 5
Emitter
Figure 1 Figure 2
0.16
0.16
(4)
(4)
1.14
(29)
1.14
(29)
1.97
(50)
(63.5)
(7.8)
(7.8)
0.31
0.31
2.5
(8.5)
0.34
Potentiometer Potentiometer
(diffuse models only) (Diffuse models only)
0.51
(13)
0.32
(8)
Dia. 0.18
(4.5)
Figure 3 Figure 4
0.15
0.15
(3.9)
0.34 (3.9)
(8.5)
1.56 (39.5)
1.56 (39.5)
0.16
(4)
2.42 (61.5)
2.42 (61.5)
2.95 (75)
0.31
(7.8)
Potentiometer
(Diffuse models only) Potentiometer
(Diffuse models only)
Dia. 0.18
0.32
(8)
(4.5)
Figure 5 Figure 6
1.97 2.5 (63.5)
(50) 0.32
(8)
0.2
(5)
0.7(16.4)
0.34 0.5
0.16 0.16 (8.5) (13)
(4) (4)
Figure 7 C18E-00-1A
Figure 8 C18E-00-1E
LLS-1180-000
LLK-1180-000 2.95
0.15 (3.9)
(75)
0.34 0.16 SW24
(4) SW24 0.32
(8.5)
(8)
(4.5)
Ø 0.18
M12x1
M18x1
(16.9)
Ø 0.67
140 140
120 120
100
100
80
a 80
60 a
60
s
40
40 s
20
20
a [mm]
6 4 2 0 2 4 6 a [mm]
6 4 2 0 2 4 6
700
600
500
a
400
300 s
200
100
a [mm]
80 40 0 40 80
* typical values
24000
24000
20000
20000
16000
16000
12000 a
s
12000
8000
8000 a s
4000
a 4000
[mm] 300 0 300 a
[mm] 300 0 300
Wiring Diagrams
Diagram 1 Diagram 2 Diagram 3
NPN Output PNP Output Emitter Connector
M12 connector
Characteristic Curves
Chart 1 - GXP Chart 2 - GXE, GXR
Gain
Gain
Distance in meters
Warning: These products are not safety sensors and are not
suitable for use in personal safety applications. Distance in meters
QMRB-0N-0F $35.00
5 – 100 mm
NPN 4-pin M8 quick-disconnect Diagram 1
(0.2 – 3.94 in) QMRBx
QMRB-0P-0A $35.00 PNP 2-meter cable Diagram 2
QMR7-0P-0F $35.00
0 – 400 mm
PNP 4-pin M8 quick-disconnect Diagram 2
(0 –15.75 in)
QMI7-0N-0A $35.00 NPN 2-meter cable Diagram 1
QMR8-0N-0F $38.00
0–1m Visible Red NPN 4-pin M8 quick-disconnect Diagram 1
(0 – 3.28 ft) QMR8x
630nm
QMR8-0P-0A $38.00 PNP 2-meter cable Diagram 2
QMI9-0N-0F $39.00
0 – 1.5 m Infrared
NPN 4-pin M8 quick-disconnect Diagram 1
(0 – 4.9 ft) QMI9x
850nm
QMI9-0P-0A $39.00 PNP 2-meter cable Diagram 2
QMRS-0N-0F $49.00
30 – 200 mm Visible Red NPN 4-pin M8 quick-disconnect Diagram 1
(1.2 – 7.87 in) QMRSx
630nm
QMRS-0P-0A $49.00 PNP 2-meter cable Diagram 2
QMIS-0N-0F $50.00
30 – 400 mm Infrared NPN 4-pin M8 quick-disconnect Diagram 1
(1.2 – 15.75 in) QMISx
QMIS-0P-0A $50.00 850nm PNP 2-meter cable Diagram 2
QMIC-0N-0F $43.00
0.1 – 7 m Infrared NPN 4-pin M8 quick-disconnect Diagram 1
(0.004 – 22.96 ft) QMICx
850nm
QMIC-0P-0A $43.00 PNP 2-meter cable Diagram 2
QMRN-0N-0F $43.00
0.1 – 5 m Visible Red NPN 4-pin M8 quick-disconnect Diagram 1
(0.033 – 16.4 ft) QMRNx
QMRN-0P-0A $43.00 630nm PNP 2-meter cable Diagram 2
QMRL-0N-0F $49.00
0.4 – 4 m
NPN 4-pin M8 quick-disconnect Diagram 1
(0.02 – 13.12 ft) QMRLx
QMRL-0P-0A $49.00 PNP 2-meter cable Diagram 2
QMRG-0N-0F $49.00
0.1 – 1.5 m
NPN 4-pin M8 quick-disconnect Diagram 1
(0.05 – 4.9 ft) QMRGx
QMRG-0P-0A $49.00 PNP 2-meter cable Diagram 2
QMIG-0N-0F $49.00
0.1 – 1 m Infrared NPN 4-pin M8 quick-disconnect Diagram 1
(0.05 – 3.28 ft) QMIGx
850nm
QMIG-0P-0A $49.00 PNP 2-meter cable Diagram 2
QMRHD-0N-0F $57.00
0.0 – 20 m Visible Red NPN 4-pin M8 quick-disconnect Diagram 1/3
(.33 – 65.62 ft) QMRHDx
630nm
QMRHD-0P-0A $57.00 PNP 2-meter cable Diagram 2/3
QMIHD-0N-0F $59.00
0.0 – 30 m Infrared NPN 4-pin M8 quick-disconnect Diagram 1/3
(.33 – 98.43 ft) QMIHDx
850nm
QMIHD-0P-0A $59.00 PNP 2-meter cable Diagram 2/3
ST102 $3.00 Mounting bracket, for QM series photoelectric sensors, 304 stainless steel, right-angle horizontal mount. Mounting hardware included. 0.05
ST103 $4.00 Mounting bracket, for prewired QM series photoelectric sensors only, 304 stainless steel, protective vertical mount. Mounting hard-
ware included. 0.06
ST104 $4.00 Mounting bracket, for prewired QM series photoelectric sensors only, 304 stainless steel, protective horizontal mount. Mounting
hardware included. 0.05
STQM0 $5.00 Shutter, for through-beam QM series photoelectric sensors, plastic, vertical and horizontal diaphragms (0.5, 1, 2 mm). Package of 2. 0.01
Note: With shutters on emitter and receiver in same vertical or horizontal orientation.
Wiring Diagrams
Diagram 1 Diagram 2 Diagram 3
NPN Output PNP Output Emitter
2 WHITE
Not Connected
Connector
M8 Connector
Ripple ≤10%
Accessories – – – –
QM*S Background Suppression Model - 2m Output QM*S Background Suppression Model - M8 Quick Disconnect
ST102
ST101
ST103 ST104
STQM0
QMRBx
10 10 Grey 18 %
White 90%
Grey 18% 5
Spot dimension [mm] 5
Displacement [mm]
Excess gain
10
0 0
-5 -5
-10 -10
1
-15 -15
0 20 40 60 80 100 120
0 20 40 60 80 100 120 0 20 40 60 80 100 120
d [mm]
d [mm] d [mm]
QMR7x
White 90%
15
Grey 18%
5
5
Spot dimension [mm]
Displacement [mm]
Excess gain
10
0 0
-5
-5
-10
-10
-15
1
-20 -15
0 50 100 150 200 250 300 350 400
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
d [mm]
d [mm] d [mm]
QMI7x
10
Grey 18% 5
Spot dimension [mm]
5
Displacement [mm]
Excess gain
10
0 0
-5
-5
-10
-10
-15
1
-15 -20
0 50 100 150 200 250 300 350 400
0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400
d [mm]
d [mm] d [mm]
QMR8x
Displacement [mm]
Excess gain
10
0 0
-100 -5
-200 -10
-300 -15
1
-400 -20
0 200 400 600 800 1000 1200
0 200 400 600 800 1000 0 200 400 600 800 1000 1200
d [mm]
d [mm] d [mm]
QMI9x
25 15
Grey 18 %
White 90%
10
15
Grey 18%
Spot dimension [mm]
5
Displacement [mm]
5
Excess gain
0
-5
-5
-15
-10
-25
-15
1 -35 -20
0 500 1000 1500 0 500 1000 1500 0 500 1000 1500
d [mm] d [mm] d [mm]
QMRSx
QMRS Reducon of sensing distance QMRS spot dimension QMRS parallel displacement
100 10 10
90 White 90%
8 8
Black 6 % Grey 18 %
80 6 6
Grey 18 %
Reducon of sensing distance [mm]
70 4 4
Spot dimension [mm]
60
Displacement [mm]
2 2
50
0 0
40
-2 -2
30
-4 -4
20
-6 -6
10
-8 -8
0
-10 -10
0 50 100 150 200
0 50 100 150 200 0 50 100 150 200
d [mm]
d [mm] d [mm]
QMISx
QMIS Reducon of sensing distance QMIS Spot dimension QMIS Parallel displacement
100 20 60
90 White 90%
15
Black 6 %
80 40 Grey 18 %
Grey 18 % 10
Reducon of sensing distance [mm]
70
20
5
Displacement [mm]
50
0 0
40
-5
30 -20
-10
20
-40
10 -15
0
-20 -60
0 100 200 300 400
0 100 200 300 400 0 50 100 150 200 250 300 350 400
d [mm]
d [mm] d [mm]
QMICx
150 60
RL110
RL100D
100 40
RL116
Spot dimension [mm]
50 20
Displacement [mm]
Excess gain
0 0
-50 -20
-100 -40
-150 -60
1 -200 -80
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
d [m] d [m] d [m]
QMRNx
80
150
RL110
RL100D 60
100
RL116
40
Spot dimension [mm]
50
Displacement [mm]
20
Excess gain
10 0 0
-20
-50
-40
-100
-60
-150
-80
1 -200 -100
0 1 2 3 4 5 6 0 1 2 3 4 5 0 1 2 3 4 5 6
d [m] d [m] d [m]
QMRLx
150 30
100 20
RL110
10
Displacement [mm]
RL116
Excess gain
RL113
10 0 0
-50 -10
-100 -20
-150 -30
1 -200 -40
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
d [m] d [m] d [m]
QMRGx
40 30
30
20
RL110 20
RL116 10
Spot dimension [mm]
Displacement [mm]
10
Excess gain
10 0 0
-10
-10
-20
-20
-30
-30
-40
1 -50 -40
0 0.5 1 1.5 0 0.5 1 1.5 0 0.5 1 1.5
d [m] d [m] d [m]
QMIGx
40
30
RL110 30
20
20
RL116
Spot dimension [mm]
10
Displacement [mm]
10
Excess gain
0 0
-10
-10
-20
-20
-30
-30
-40
1 -40 -50
0 200 400 600 800 1000 0 200 400 600 800 1000 0 200 400 600 800 1000
d [mm] d [mm] d [mm]
QMRHDx
600
200
400
100
Displacement [mm]
Excess gain
10 0 0
-200
-100
-400
-200
-600
1 -800 -300
0 5 10 15 20 0 5 10 15 20 0 5 10 15 20
d [m] d [m] d [m]
QMIHDx
400 300
300
200
200
100
Spot dimension [mm]
Displacement [mm]
100
Excess gain
0 0
-100
-100
-200
-200
-300
-300
-400
1 -500 -400
0 5 10 15 20 25 30 0 5 10 15 20 25 30 0 5 10 15 20 25 30
d [m] d [m] d [m]
FMR6-0P-0F $42.00
5 – 500 mm Visible Red PNP 4-pin M8 quick-disconnect Diagram 3 Figure 2
(0.197 – 19.68 in) 3
633 nm
FMR6-0N-0A $42.00 NPN 2-meter cable Diagram 2 Figure 1
0.3 m cable with M12 QD
FMR6-0N-0E $44.00 NPN connector Diagram 4 Figure 1
FMRS-0P-0F $57.00
2 – 200 mm Visible Red PNP 4-pin M8 quick-disconnect Diagram 3 Figure 2
(0.079 – 7.87 in) 4
633 nm
FMRS-0N-0A $57.00 NPN 2-meter cable Diagram 2 Figure 1
0.3 m cable with M12 QD
FMRS-0N-0E $59.00 NPN connector Diagram 4 Figure 1
FMRP-0P-0F $50.00
Visible Red
PNP 4-pin M8 quick-disconnect Diagram 3 Figure 2
0.05 – 5 m 2
(0.16 – 16.40 ft) 633 ‑nm
FMRP-0N-0A $50.00 NPN 2-meter cable Diagram 2 Figure 1
0.3 m cable with M12 QD
FMRP-0N-0E $52.00 NPN connector Diagram 4 Figure 1
Receivers
FMRR-0P-0A $40.00 PNP 2-meter cable Diagram 1 Figure 1
0.3 m cable with M12 QD
FMRR-0P-0E $42.00 PNP connector Diagram 3 Figure 1
FMRR-0P-0F $40.00
Up to 10 m
PNP 4-pin M8 quick-disconnect Diagram 3 Figure 2 1
(32.81 ft) –
FMRR-0N-0A $40.00 NPN 2-meter cable Diagram 2 Figure 1
0.3 m cable with M12 QD
FMRR-0N-0E $42.00 NPN connector Diagram 4 Figure 1
FMRR-0N-0F $40.00 NPN 4-pin M8 quick-disconnect Diagram 4 Figure 2
Note: Brackets sold separately.
Wiring Diagrams
Diagram 1 Diagram 2 Diagram 3
1000
10
100
1
10
1 x 10,
10 100 1000 10000
x
10 100 1000 10000
20
10
1.
15
10
1 2.
5
3.
0, 1 x 0 x
1 10 100 1000 0 50 100 150 200
Excess gain graphs c: background
x: distance [mm] x: distance sensor/object
y: excess gain factor y: min. distance object/background
Values in [mm]
1 = object black (6% remission), background white (90% remission)
2 = object gray (18% remission), background white (90% remission)
3 = object white (90% remission), background white (90% remission)
Sensing Distance Refer to Photoelectric Sensors Selection Guide (FM Series DC)
Sensitivity Adjustable
Ripple –
Thermal Drift –
Tightening Torque –
M8 quick-disconnect: M8 quick-disconnect: M8 quick-disconnect: M8 quick-disconnect:
0.037 kg (1.31 oz) 0.036 kg (1.27oz) 0.037 kg (1.31 oz) 0.036 kg (1.27oz)
0.3 m cable with M12 0.3 m cable with M12 0.3 m cable with M12 0.3 m cable with M12
Weight quick-disconnect connector: quick-disconnect connector: quick-disconnect connector: quick-disconnect connector:
0.053 kg (1.87 oz) 0.053 kg (1.87 oz) 0.053 kg (1.87 oz) 0.053 kg (1.87 oz)
2-meter Cable: 2-meter Cable: 2-meter Cable: 2-meter Cable:
0.084 kg (2.96 oz) 0.083 kg (2.93 oz) 0.083 kg (2.93 oz) 0.084 kg (2.96 oz)
* To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific part number’s web page.
Figure 1
Figure 2
Dimensions
mm
Figure 1 Figure 2
20
3 11
25.4
23
31
1
10.8
2.7
2.5
8
1 8
Horizontal mounting bracket supplied with each unit
Excess Gain
100
Gain
10
1
4 8 12 16 20
Distance (m)
Connector
M8 connector
Warning: These products are not
safety sensors and are not suitable for
use in personal safety applications.
Dimensions
(mm) Characteristic curves Chart 2 (Diffuse with background
Figure 1 Chart 1 (Diffuse) suppression)
*Product no longer available from supplier. Once this part is out of stock, it will be discontinued.
Wiring diagrams
Diagram 1
Emitter
Check input test circuit (QXX models only): To test that the sensor is operating correctly,
apply 10.8-30VDC across the WH/2 (+) and BK/4 (-) leads, which are decoupled from the power
supply. In light state, light pulses are interrupted, which simulates the presence of a target
and causes the output to switch. If switching does not occur, check for a fault in the system.
Connector
M12 connector
Figure 1
M3x.5x12
included
Characteristic curves
Chart 1
Wiring Diagrams
Diagram 1 Diagram 2
2
1
V
5 La
4
0 10V 6
4 20mA O
7
O
3
8 S
Connectors
5-Pin M12 connector 8-Pin M12 connector
1 2 8
Product manual available via download at 1 2
7 3
www.automationdirect.com 5
6 4
4 3
5
Characteristic Curves The Laser Classification Systems for the standards IEC (EN) 60825-1
defines the following safety classes:
Class 1
This class is eye-safe under all operating conditions.
Class 2
These are visible lasers. This class is safe for accidental viewing under
all operating conditions. However, it may not be safe for a person
who deliberately stares into the laser beam for longer than 0.25 s, by
overcoming their natural aversion response to the very bright light.
OPT2007
500/s
OPT2011 $295.00 50 - 3050working
mm [1.97 - 120.08 in]
range
1 1 mm [0.04 in] Diagram 2 50 x 50 mm
[2 ms]
4-pin M12
quick-disconnect
0.2 - 6.2 m [7.87 - 244.09 in]
OPT2012 $319.00 working range Diagram 3 81 x 55 mm
Analog 4-20 mA or 0-10
VDC Switching PNP/
NPN, N.O. or N.C.
0.1 - 10.1 m [3.94 - 397.64 in] 1-100/s 1-12 mm 8-pin M12
OPT2013 $559.00 working range quick-disconnect Diagram 4 81 x 55 mm
[10 ms] [0.04 - 0.47 in]
2
0.1 - 10.1 m [3.94 - 397.64 in] 4-pin M12
OPT2014 $335.00
working range quick-disconnect Diagram 3 81 x 55 mm
*Requires purchase of OPT2030 reflector (see Accessories). <50m sensing distance requires 1 reflector. 50-100m sensing distance requires 4 reflectors.
Connectors
Ā Switching output (NC) EA1/ EA2 Output/Input programmable
6 4
4 3
5
+ Supply Voltage “+”
+ Supply Voltage “+” – Supply Voltage “0 V” Note: Class 2 power source required
– Supply Voltage “0 V” La Emitted light can be switched off
OPT2010 OPT2011
OPT2012 OPT2013
OPT2014 OPT2015
Characteristic Curves The Laser Classification Systems for the standards IEC (EN)
(OPT2010) 60825-1 defines the following safety classes:
Switching Distance Deviation
Class 1
Typical characteristic curve based on Kodak white, 90 % This class is eye-safe under all operating conditions.
y Y
Class 2
These are visible lasers. This class is safe for accidental
20
10
dSr/mm
* OPT2015 requires purchase of OPT2030 reflector. <50m sensing distance requires 1 reflector.
50-100m sensing distance requires 4 reflectors.
Dimensions mm [inches]
OPT2030 OPT2031
OPT2032
• If the setting fails, increase the potentiometer value until the target is Target
detected.
Ripple N/A
Time Delay Before Availability (tv) Minimal
Short-Circuit Protection Yes (non-latching)
Operating Temperature -25 to 60 °C (-37.7 to 140 °F)
Protection Degree (DIN 40050) IP67
LED Indicators - Switching Status Yellow
LED Indicators - Power Green
Housing Material Zinc Alloy Nickel-plated (ZnAl4Cu1)
Lens Material Polymethyl methacrylate (PMMA)
Shock/Vibration See terminology section
Tightening Torque 80Nm (59 lb-ft)
Weight 0.5 lbs
Connectors M12 Connector
Accessories 1 mounting hex nut included
Agency Approvals CULus listed UL file E328811, CE
1With 200x200mm white matte paper, 90% remission. 2 With standard diameter 84mm reflector.
Dimensions Warning: These products are not safety sensors and are
not suitable for use in personal safety applications.
mm [inches]
ST30C6W FW3-XX-XX
Characteristic Curves
Background Suppression Curves
Values in [mm]
1 = object black (6 % remission), background white (90 % remission)
2 = object gray (18 % remission), background white (90 % remission)
3 = object white (90 % remission), background white (90 % remission)
Enhanced 50 Series
Photoelectric Sensors
Application Guide This family of sensors, with its four basic
models (Thru-beam, Polarized Reflex,
Follow the application guide below to
choose the best sensor model for your
The Enhanced 50 Series Photoelectric Diffuse and Clear Object), meets the application.
Sensors are a great fit for applications needs for almost any sensing require-
such as material handling, packaging, ment, including harsh environments
wrapping and sortation. with excessive dust or high temperature.
Thru-Beam Diffuse
- Most accurate - Lower cost
- Longest sensing range - Install at one point
- Most reliable - Less accurate than Thru-Beam or
-M ust be installed in two points on system: Polarized Reflex
emitter and receiver - More setup time involved
- More costly
Target Object
Detector Field of View The detection zone starts here.
Source Beam Pattern
The field of view is the area which can be The detector sees infrared
The beam pattern is the area containing
seen by the detector. The source unit must when the target surface enters
all the light rays emitted by the source.
be placed within the detector’s field of view the detection zone.
The detector must be placed within the
for the detection system to operate.
source beam pattern.
Working Range
Target Object
Actual Range
Required Range
Limit
Effective Beam Diameter
For a thru-beam system, the effective beam is a
“rod” defined by the edge rays traced from the If the range of the proxim-
source lens to the detector lens. The only source- ity control is greater than
generated light rays that the detector sees are those required, background objects
that travel in a straight line from the source lens to may reflect enough infrared
the detector lens. Note that the object must fully to trigger the control.
block the beam in order to be detected.
6150E-6503
6150E-6502
6150E-6501 1.15
2.80 (71.1) (29.2 )
2.80 0.30 (7.6) 0.80 (20.3) 1.10
1.20 2.20 (27.9 ) Thread
(71.1) 0.28 (55.8) M30 x 0.06 (1.5)
(7.1) (30.5)
Dia. 1.25 0.50
1.25 (31.8 ) 2.65 (12.7)
(31.8 ) 2.65 0.75 (67.3 )
90° (19.0)
(67.3 )
45° 1.13 (28.6 )
0.75 2.00
(19.0) 1.20 (30.5 ) Dia. 3.05 90° 90°
2.00 (50.8 ) Dia. (77.5) (50.8)
4.7
(119.4) 2.60
1.90 1.25 (66.0 )
(31.8 ) 2.37 1.43
(48.3) (36.3 )
(60.2) 90°
0.28 0.08
1.20 0.08 (2.0) Approximate dimensions in inches (millimeters)
(30.5 ) 0.28 (7.1) 2.00 (50.8) (7.1)
(2.0)
Dia. 2.00 (50.8)
Specifications
3
Model RL110
RL series reflectors Price
1
$18.00
% Sensing Range Using Enhanced 50 Series 100%
• S uitable for use with polarized light
photoelectric sensors Dimensions Diameter: 84 mm
• 1 0 reflectors per package Degree of Protection
2
IEC IP67
•K
eep the reflector surface clean to ensure 1 Refer to individual catalog pages for detailed explanations of these photoelectric sensors.
peak detection performance. This is 2 Not recommended for applications involving moist air environments or water immersion.
especially true when the maximum sens-
ing range is being used. Clean using a
damp cloth.
•W
hen selecting a reflector, it is important
to consider the ambient conditions of the
environment. Dusty or high humidity
conditions may reduce the sensing range
as much as 90%.
•R
eflectors should be positioned at a 90°
angle to the optical axis with a tolerance
of ±15°.
Note: Cutler-Hammer parts available for sale to North America locations only.
CSMS5A5CY1602
10.8
Light Spot Diameter N/A
13
Emission red (680nm)
Sensitivity Dual Teach function
OUT
max
35
Output Type
46
60
Enter
Operating Voltage
Mode
10-30VDC
Status
Tnach 1
m25mA Adjust
Delay
Stretch
m200mA
Off-state (Leakage) Current m0.1mA
Voltage Drop 2V maximum at 200mA 6.3
Ripple m20%
Time Delay Before Availability (tv) 80ms
Figure 2
Short-Circuit Protection Yes (switch autoresets after overload is removed)
2.3 10
Operating Temperature -25° to +55° C (-13° to 131° F)
Protection Degree IEC IP64
LED Indicators -Switching Status Yellow (output energized)
10.8
13
Housing Material PBT
Lens Material Acrylic OUT
max
Enter
Weight (cable/connector)
Mode
Tnach 1
PINK
PINK
10.8
13
Specifications
Type DFP-AN-1* DFP-AP-1* OUT
35
46
RES
60
Light Spot Diameter N/A Adjust
Ripple m20%
Time Delay Before Availability (tv) 300ms
10.8
13
Short-Circuit Protection Yes (switch autoresets after overload is removed)
Operating Temperature -25° to 55°C (-13° to 131°F) OUT
Adjust
PINK
PINK
Specifications
Type OPT2040 OPT2041 OPT2042 OPT2043 (add-on module)
Sensing Distance See optical fibers table
Light Spot Diameter N/A
Emission Red (660nm)
Sensitivity Teach Functions
Configurable NC/NO PNP/NPN/ Configurable NC/NO PNP/NPN Output handled thru OPT2042
Output Type Push Pull Configurable PNP/PushPull PushPull Master
Operating Voltage 10 to 30VDC 18 to 30VDC N/A
Add +10 mA to 2042 per add on
No-Load Supply Current < 40mA <70mA module to OPT2043
Operating (Load) Current 200mA 100mA 100mA Refer to OPT2042
Off-state (Leakage) > 0.1 ma
Current
Voltage Drop < 2.5 VDC
Switching Frequency 2kHz 4kHz 2kHz
Ripple < 15%
Time Delay Before 250µs 125µs 250µs +70µs to 2042 per add on
Availability (tv) module to OPT2043
Short-Circuit Protection Yes
Operating Temperature -25 to 60°C (-13 to +140°F)
Protection Degree IP65 IP50
Led Indicators - Yellow LED Via display window
Switching Status
Housing Material Plastic
Lens Material N/A
IO-Link Version N/A 1.0
IO-Link Parameter N/A > 12
Shock/Vibration See Terminology Section
Tightening Torque N/A
Weight 0.1 lbs 0.3 lbs 0.4 lbs 0.1 lbs
(1) M12 4 pole This is an add-on unit that connects
Connectors M8 4 Pole (2) M12 8 pole to master unit OPT2042
Agency Approvals CE, cULus E189727
Figure 1
Figure 2
Figure 4
Connector
Connector
M8 Connector
M8 Connector
Diagram 3
Plug Number 1
1 2
7 3
8
6 4
5
Dimensions
mm [inch]
OPT2050 Diffuse (Reflex) Mode $37.00
Specifications
Optical Fiber Core Ø 0.5 mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 15mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 1mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 0.5 mm
Sensing Distance with 12mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 15mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 1mm
Light Emission Sidewise
Dimensions
OPT2052 Diffuse (Reflex) Mode $48.00 mm [inch]
Specifications
Optical Fiber Core Ø 0.5 mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 15mm
Free Cut Yes
Head Size 3mm
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Coaxial arrangement
Opening Angle 55 degrees
Diameter Jacket 1.3 mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 0.5 mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 15mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Coaxial Arrangement
Opening Angle 55 degrees
Diameter Jacket 1.3 mm
Light Emission Straight
Dimensions
mm [inch]
OPT2054 Diffuse (Reflex) Mode $37.00
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 160mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Nickel-plated brass
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Nickel-plated brass
Fiber Distribution Parallel arrangement * 2000.0 mm maximum extended coil length.
Dimensions
mm [inch]
OPT2056 Diffuse (Reflex) Mode $43.00
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 160mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black) Flexible endpot is not for
Head Materials Stainless steel continuous flexing applications.
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black) Flexible endpot is not for
continuous flexing applications.
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees * 2000.0 mm maximum extended coil length.
Diameter Jacket 2.2 mm
Light Emission Straight
Flexible Endpot Yes
Dimensions
mm [inch]
OPT2058 Diffuse (Reflex) Mode $128.00
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 60mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 160mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 12mm flat
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Aluminum
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Dimensions
OPT2060 Diffuse (Reflex) Mode $96.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 50mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 12mm flat
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Aluminum
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 70mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 50mm
Free Cut Yes
Head Size M4
Thread Pitch 0.7
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Dimensions
mm [inch]
OPT2062 Diffuse (Reflex) Mode $96.00
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 50mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 5mm
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 90mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size M6
Thread Pitch 0.75
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Nickel-plated brass
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Dimensions
OPT2064 Through-Beam Mode $40.00 mm [inch]
Specifications
Optical Fiber Core Ø 0.5 mm
Sensing Distance with 160mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 15mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 1mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 400mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
* Packaging includes two of the above.
Fiber Materials PMMA
Sleeve Materials PE (black)
Head Materials Nickel-plated brass
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Dimensions
OPT2066 Through-Beam Mode $43.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 400mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M4
Thread Pitch 0.7
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
* Packaging includes two of the above.
Sleeve Materials PE (black)
Head Materials Stainless steel Flexible endpot is not for
continuous flexing applications.
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Flexible endpot Yes
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 200mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 30mm
Free Cut Yes
Head Size M3
Thread Pitch 0.5
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
* Packaging includes two of the above.
Sleeve Materials PE (black)
Flexible endpot is not for
Head Materials Stainless steel continuous flexing applications.
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Flexible endpot Yes
Dimensions
OPT2068 Through-Beam Mode $48.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 350mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 3mm
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
* Packaging includes two of the above.
Head Materials Stainless steel
Fiber Distribution Parallel arrangment
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 350mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 12mm flat
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
* Packaging includes two of the above.
Head Materials Aluminum
Fiber Distribution Parallel arrangment
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Dimensions
OPT2070 Through-Beam Mode $96.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 200mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size NA
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black) * Packaging includes two of the above.
Head Materials Aluminum
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 250mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 2mm
Free Cut Yes
Head Size M4
Thread Pitch 0.7
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
* Packaging includes two of the above.
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Dimensions
OPT2072 Through-Beam Mode $96.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 200mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size 3mm
Thread Pitch NA
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
* Packaging includes two of the above.
Sleeve Materials PE (black)
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 220mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 2mm
Free Cut Yes
Head Size M4
Thread Pitch 0.7
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black)
* Packaging includes two of the above.
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Dimensions
OPT2074 Through-Beam Mode $32.00 mm [inch]
Specifications
Optical Fiber Core Ø 1mm
Sensing Distance with 350mm
OPT series
Fiber Length (L) 2m
Fiber Bending Radius 20mm
Free Cut Yes
Head Size M4
Thread Pitch 0.7
-40 to 85°C
Temperature Range [-40 to 185°F]
Fiber Materials PMMA
Sleeve Materials PE (black) * Packaging includes two of the above.
Head Materials Stainless steel
Fiber Distribution Parallel arrangement
Opening Angle 55 degrees
Diameter Jacket 2.2 mm
Light Emission Straight
Specifications
Optical Fiber Core Ø 1.6 mm
Sensing Distance with 160mm
OPT series
Fiber Length (L) 1m
Fiber Bending Radius 50mm
Free Cut No
Head Size 5mm
Thread Pitch NA
-25 to 180 °C
Temperature Range [-13 to 365°F]
Fiber Materials Glass
Sleeve Materials Nickel-plated brass
Head Materials Aluminum
Fiber Diameter 50µm
Fiber Distribution Statistic mixture
Opening Angle 68 degrees
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 0.8 mm
Sensing Distance with 126mm
OPT series
Fiber Length (L) 1m
Fiber Bending Radius 50mm
* Packaging includes two of the above.
Free Cut No
Head Size 1.2 mm
Thread Pitch NA
-25 to 180 °C
Temperature Range (-13 to 356 °F)
Fiber Materials Glass
Sleeve Materials Stainless steel
Head Materials Stainless steel
Fiber Diameter 50µm
Fiber Distribution Parallel arrangement
Opening Angle 68 degrees
Light Emission Straight
Specifications
Optical Fiber Core Ø 1.1 mm
Sensing Distance with 380mm
OPT series
Fiber Length (L) 1m
Fiber Bending Radius 45mm * Packaging includes two of the above.
Free Cut No
Head Size Ø3 mm
Thread Pitch 0.7
-25 to 180 °C
Temperature Range [-13 to 365°F]
Fiber Materials Glass
Sleeve Materials Nickel-plated brass
Head Materials Aluminum
Fiber Diameter 50µm
Fiber Distribution Parallel arrangement
Opening Angle 68 degrees
Light Emission Sidewise
Specifications
Optical Fiber Core Ø 1.6 mm
Sensing Distance with 480mm
OPT series
Fiber Length (L) 1m
Fiber Bending Radius 45mm
Free Cut No * Packaging includes two of the above.
Dimensions
Head Size M5 mm [inch]
Thread Pitch 0.8
-25 to 180 °C
Temperature Range [-13 to 365°F]
Fiber Materials Glass
Sleeve Materials Nickel-plated brass
Head Materials Aluminum
Fiber Diameter 50µm
Fiber Distribution Parallel arrangment
Opening Angle 68 degrees
Light Emission Straight
Figure 1 Figure 2
75
13.7 42.5 17.6 1.2 LED 89.4 Teach Button
LED
11
13.7 42.5 17.6 15.6
o4.7
M18x1
o16.5
M12x1
5.5
o16.4
o2.2
3
1
Specifications
Optical Fiber Core Ø 1 mm (0.039in)
Sensing Distance with 200 mm (7.87in)
DFT and DFP series
Fiber Length (L) 2.0 m (78.74in)
Fiber Bending Radius 25 mm (0.98in)
Free Cut Yes
Head Size M6 2.2
Thread Pitch 0.75 mm
Protection Degree IEC IP67
Agency Approvals UL file 328811
-25° to +70°C M6 x 0.75
Temperature Range (-13° to 158°F)
. 2.2
Fiber Materials PMMA 1.8
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
Specifications
Optical Fiber Core Ø 1.5 mm (0.06in)
Sensing Distance with 260 mm (10.27in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in)
Fiber Bending Radius 40 mm (1.57in)
Free Cut Yes 2.2
Head Size M6
Thread Pitch 0.75 mm
Protection Degree IEC IP67
Agency Approvals UL file 328811 M6 x 0.75
-25° to +70°C 2.2
Temperature Range (-13° to 158°F)
.
1.8
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
Specifications
Optical Fiber Core Ø 1 mm (0.039in)
Sensing Distance with 200 mm (7.87in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in)
Fiber Bending Radius 25 mm (0.98in)
Bendable light-outlet tube Yes, 25 mm (0.98in) radius 0.75 2.2
Free Cut Yes 2.5
Head Size M6
Thread Pitch 0.75 mm
Protection Degree IEC IP67
Agency Approvals UL file 328811 2.2
1.8
-25° to +70°C
Temperature Range (-13° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
4
-40° to +70°C
Temperature Range (-40° to 158°F)
Fiber Materials PMMA 24
Sleeve Materials Polyethylene 2.2
Head Materials Nickel-plated brass
Specifications
Optical Fiber Core Ø 0.5 mm (0.02in)
Sensing Distance with 200 mm (7.87in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 25 mm (0.98in)
Free Cut Yes
Head Size M3
Thread Pitch 0.5 mm
Protection Degree IEC IP67 M3 x 0.50 2.2
Agency Approvals UL file 328811
-25° to +70°C
Temperature Range (-13° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
$30.00 Includes 2 optical fiber cables
CF-TB2-20 through-beam
Specifications
Optical Fiber Core Ø 1 mm (0.039in)
Sensing Distance with 700 mm (27.56in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 25 mm (0.98in)
Free Cut Yes
2.2
Head Size M4
Thread Pitch 0.7 mm
Protection Degree IEC IP67
Agency Approvals UL file E328811 2.6 M4 x 0.70
-25° to +70°C
Temperature Range (-13° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
Specifications
Optical Fiber Core Ø 1.5 mm (0.06in)
Sensing Distance with 900 mm (35.43in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 40 mm (1.57in)
Free Cut Yes
2.2
Head Size M4
Thread Pitch 0.7 mm
Protection Degree IEC IP67
Agency Approvals UL file E328811 2.6 M4 x 0.70
-25° to +70°C
Temperature Range (-13° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass
Specifications
Optical Fiber Core Ø 1.0 mm (0.039in)
Sensing Distance with 1800 mm (70.87in)
DFT and DFP Series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 25 mm (0.98in) 21
4.7
2.2
Head Size M6
Thread Pitch 0.75 mm
M6
Specifications
Optical Fiber Core Ø 1.0 mm (0.039in)
Sensing Distance with 120 mm (4.72in)
SSF Series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 25 mm (0.98in)
Free Cut Yes
Head Size M4
Thread Pitch 0.50 mm
Protection Degree IEC IP67
M4x0.5 2.2
-40° to +70°C
Temperature Range (-40° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass 5 15
Specifications
Optical Fiber Core Ø 1.0 mm (0.039in)
Sensing Distance with 1200 mm (47.24in)
SSF series
Fiber Length (L) 2.0 m (78.74in) ea. piece
Fiber Bending Radius 25 mm (0.98in)
Free Cut Yes
Head Size M7
Thread Pitch 0.75 mm
Protection Degree IEC IP67
M7x0.75
-40° to +70°C 2.2
Temperature Range (-40° to 158°F)
Fiber Materials PMMA
Sleeve Materials Polyethylene
Head Materials Nickel-plated brass 25 5
Characteristic Curves
CF/CB1-20
Disassamento laterale /Parallel
100.0
Parallel displacement [mm]
White Paper
50.0
0.0
-50.0
Black Paper
-100.0
Distance [mm]
CF/RBA-20
Disassamento laterale /Parallel
150.0
Parallel displacement [mm]
100.0
50.0
0.0
-50.0
-100.0
-150.0
Distance [mm]
CF/RB6-20
Disassamento laterale /Parallel
250.0
200.0
Parallel displacement [mm]
150.0
100.0
50.0
0.0
-50.0
-100.0
-150.0
-200.0
-250.0
Distance [mm]
Light On/Dark On
PSUR-0N-1F $86.00 5mm (0.2 in) Selectable NPN M8 connector Diagram 1 Figure 1
Light On/Dark On
PSUR-0P-2F $86.00 10mm (0.39 in) Selectable PNP M8 connector Diagram 2 Figure 2
Light On/Dark On
PSUR-0N-2F $86.00 10mm (0.39 in) Selectable NPN M8 connector Diagram 1 Figure 2
Light On/Dark On
PSUR-0P-3F $86.00 20mm (0.79 in) Selectable PNP M8 connector Diagram 2 Figure 3
Light On/Dark On
PSUR-0N-3F $86.00 20mm (0.79 in) Selectable NPN M8 connector Diagram 1 Figure 3
Light On/Dark On
PSUR-0P-4F $98.00 30mm (1.18 in) Selectable PNP M8 connector Diagram 2 Figure 4
Light On/Dark On
PSUR-0N-4F $98.00 30mm (1.18 in) Selectable NPN M8 connector Diagram 1 Figure 4
Light On/Dark On
PSUR-0P-5F $104.00 50mm (1.97 in) Selectable PNP M8 connector Diagram 2 Figure 5
Light On/Dark On
PSUR-0N-5F $104.00 50mm (1.97 in) Selectable NPN M8 connector Diagram 1 Figure 5
Light On/Dark On
PSUR-0P-6F $109.00 80mm (3.15 in) Selectable PNP M8 connector Diagram 2 Figure 6
Light On/Dark On
PSUR-0N-6F $109.00 80mm (3.15 in) Selectable NPN M8 connector Diagram 1 Figure 6
Light On/Dark On
PSUR-0P-7F $114.00 120mm (4.72 in) Selectable PNP M8 connector Diagram 2 Figure 7
Light On/Dark On
PSUR-0N-7F $114.00 120mm (4.72 in) Selectable NPN M8 connector Diagram 1 Figure 7
Light On/Dark On
PSUR-0P-8F $132.00 180mm (7.09 in) Selectable PNP M8 connector Diagram 2 Figure 8
Light On/Dark On
PSUR-0N-8F $132.00 180mm (7.09 in) Selectable NPN M8 connector Diagram 1 Figure 8
Light On/Dark On
PSUR-0P-9F $137.00 220mm (8.66 in) Selectable PNP M8 connector Diagram 2 Figure 9
Light On/Dark On
PSUR-0N-9F $137.00 220mm (8.66 in) Selectable NPN M8 connector Diagram 1 Figure 9
Light On/Dark On
PSUL-0N-4F $137.00 30mm (1.18 in) Selectable NPN M8 connector Diagram 1 Figure 4
Light On/Dark On
PSUL-0P-5F $137.00 50mm (1.97 in) Selectable PNP M8 connector Diagram 2 Figure 5
Light On/Dark On
PSUL-0N-5F $137.00 50mm (1.97 in) Selectable NPN M8 connector Diagram 1 Figure 5
Light On/Dark On
PSUL-0P-6F $158.00 80mm (3.15 in) Selectable PNP M8 connector Diagram 2 Figure 6
Light On/Dark On
PSUL-0N-6F $158.00 80mm (3.15 in) Selectable NPN M8 connector Diagram 1 Figure 6
Light On/Dark On
PSUL-0P-7F $158.00 120mm (4.72 in) Selectable PNP M8 connector Diagram 2 Figure 7
Light On/Dark On
PSUL-0N-7F $158.00 120mm (4.72 in) Selectable NPN M8 connector Diagram 1 Figure 7
Light On/Dark On
PSTL-0N-6F $163.00 80mm (3.15 in) Selectable NPN M8 connector Diagram 1 Figure 6
Wiring diagrams
IMPORTANT NOTE
The Laser Classification Systems for the standards IEC (EN) 60825-1 defines the following safety classes:
Class 1
This class is eye-safe under all operating conditions.
Class 2
These are visible lasers. This class is safe for accidental viewing under all operating conditions. However,
it may not be safe for a person who deliberately stares into the laser beam for longer than 0.25 seconds,
by overcoming their natural aversion response to the very bright light.
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
Figure 7
Figure 8
Figure 9
Plastic
S8-PR-3-W13-NN $70.00 NPN 150mm cable
with M12 Figure 2
S8-PR-3-W13-PP $70.00 6–12 mm Light On/Dark PNP quick-disconnect
[0.2–0.5 in] Horizontal 25kHz On Selectable Diagram 1
S8-PR-5-W13-NN $68.00 NPN 4-pin M8
quick-disconnect Figure 3
S8-PR-5-W13-PP $68.00 PNP
Wiring diagrams
Diagram 1 Connectors
1 BROWN M8 connector M12 connector
4 BLACK
2 WHITE
3 BLUE
Note: Wiring colors are based on AutomationDirect 4-pole cable assemblies. Class 2 power supply required.
Figure 1 Figure 2
Figure 3
Wiring diagrams
Diagram 1 Diagram 2 Diagram 3
Connectors
M12 connector
Figure 1
10mm Pitch
PNP; NO/NC
CX0E1RP-10-016V $200.00 160 [6.3] 2.5 mm 4mm 5.3 ms configurable 0.5 [1.1]
PNP; NO/NC
CX0E1RP-10-032V $340.00 320 [12.6] 2.5 mm 4mm 6.6 ms configurable 1 [2.2]
Connections
CX0 Series Emitter with Teach-In
M12, 4-Pole
Male Connector Wiring Connector
24VDC 0V
Pin Color Signal Description
BN (Power)
1
BU (Common) 1 BN 24VDC Power supply input from 16.8 to 30V
3
EMITTER
BK (Teach G/F) G 2 WH ComER Connect to same signal of the receiver, maximum cable length: 20m
4
WH F Supply voltage reference, this pin must be tied together to the common of the receiver,
2 3 BU 0V
maximum cable length: 20m
(ComER)
4 BK Teach G/F Teach-in input: GROSS at 24VDC; FINE at 0V
2 WH NC/NO
BK (PNP OUT) +24VDC: Set output normally closed, Light operate
4 LOAD
3 BL 0VDC Supply voltage reference. This pin must be tied together to the common of the
WH (NC/NO) NO emitter, maximum cable length: 20m
2 NO
NC
GY (ComER) 4 BK PNP Out Apply a load connected to the common, maximum current 100mA.
5
5 GY or GN/YL ComER Connect to the same signal of the emitter, maximum cable length: 20m
Dimensions
mm [in]
Connections
CX2 Series Emitter with Input Test
M12, 4-Pole
Male Connector Wiring Connector
24VDC 0V
Pin Color Signal Description
BN Power
1
BU Common 1 BN 24VDC Power supply input from 16.8 to 30V
3
BK Test 2 WH Sync_1W Connect to same signal of the receiver, maximum cable length: 20m
4
WH Sync_1W 3 BU 0V Supply voltage reference, this pin must be tied together to the common of the
2 receiver, maximum cable length: 20m
NOTE: Pin 2 (Sync_1W) must be connected to Pin 8 (Sync_1W on the reciever), otherwise the yellow LED of the emitter and receiver are flashing highlighting an error.
NOTE: Pin 8 (Sync_1W) must be connected to Pin 2 (Sync_1W on the emitter), otherwise the yellow LED of the receiver and emitter are flashing highlighting an error.
Type Through-Beam
Sensing Distance 3m or 6m
To obtain the most current agency approval information, see the Agency Approval Checklist on the specific part number’s web page at www.AutomationDirect.com.
ST151 $7.00 Mounting bracket, replacement, right-angle, zinc plated steel. Package of 2. For use with CX area sensors.
ST4VS $18.00 Mounting bracket, right-angle, zinc plated steel, anti-vibration mount. Package of 4. For use with 160mm height CX area sensors.
ST8VS $24.00 Mounting bracket, right-angle, zinc plated steel, anti-vibration mount. Package of 8. For use with 320-960mm height CX area sensors.
ST151 ST4VS
ST8VS
BX Series Specifications
Model BX
Type Through-Beam
Sensing Distance 2m
Weight 300g
To obtain the most current agency approval information, see the Agency Approval Checklist section on the specific
part number’s web page at www.AutomationDirect.com
44
20 27 9
o4.2 1.4
14.7
7.2
120
110
66
11.5
11.5
23.5
Ch 24
10 15 5
23 3
16.5
6.5
Ch 13 12 1
14
32 o 1 1
1.5
20 16.5
Wiring diagrams
Figure 1 Figure 2
Receiver Emitter Receiver
Emitter
_ _ BU/3
BU/3 BN/1 + BN/1
+
12-24VDC
12-24VDC
BN/1 + + BN/1 _ _
BU/3 BU/3
Connectors
Emitter Receiver
Switching Element Function
Thru-beam and Diffuse Reflective Sync (-) Supply (-) Output Supply (-)
Reflectors
RL series reflectors for polarized
reflective photoelectric sensors
(all models)
• Suitable for use with polarized light photoelectric sensors
• Shapes and sizes for most applications
• Miniature types for close mounting in multiple sensor installations
• Single hole, dual hole and self-adhesive mounting types available
• Single and 10-packs available
Installation notes
• Keep the reflector surface clean to ensure peak detection
performance. This is especially true when the maximum sensing
range is being used. Clean using a damp cloth.
• When selecting a reflector, it is important to consider the ambient
conditions it will be exposed to. Dusty or high humidity conditions
may reduce the sensing range as much as 90%.
• Reflectors should be positioned at a 90° angle to the optical axis
with a tolerance of ±15°.
Specifications
Degree of
Model Price Quantity Dimensions Protection Mounting Materials
100 x 100mm
RL100DQ1 $7.50 1 per pack [3.94 x 3.94 in]
RL111G $52.00 10 per pack 22.5 x 47mm
RL111G-1 $6.00 1 per pack [0.89 x 21.85 in]
two M3 slots
RL112G $40.00 10 per pack 19 x 73mm Reflective face:
PMMA Polymethylmethacrylate
RL112G-1 $4.25 1 per pack [0.75 x 2.87 in] (acrylic); base material:
ABS (Acrylonitrile-butadiene-styren)
51.4 x 60.3mm
RL113G $46.00 10 per pack [2.02 x 2.37 in] two M4 slots
RL113G-1 $5.00 1 per pack
Not recommended for applications involving moist air environments or water immersion.
Reflectors
RL series reflectors for Specifications
polarized reflective Model RL201 RL201-1 RL203 RL203-1 RL204 RL204-1
laser photoelectric Price $32.00 $7.00 $30.00 $6.50 $26.00 $5.75
sensors (FALN series)
• Suitable for use with polarized light Quantity (per package) 5 1 5 1 5 1
laser photoelectric sensors
60mm x 82mm 19mm x 60mm 20mm x 32mm
• Sizes for most applications Dimensions 2.36 in x 3.23 in 0.75 in x 2.36 in 0.80 in x 1.26 in
1
• Miniature types for close mounting in Degree of Protection IEC IP67
multiple sensor installations
Mounting two Ø 0.4 mm holes two Ø 0.4 mm holes two Ø 0.3 mm holes
• Single and 5-packs available
Materials Acrylic/polycarbonate
1 Not recommended for applications involving moist air environments or water immersion.
Dimensions
mm [inches]
RL102/RL102-1 RL103/RL103-1
RL104/RL104-1 RL105/RL105-1
RL106G/RL106G-1
Reflectors
Dimensions
mm [inches]
RL110/RL110-1 RL111G/RL111G-1
RL112G/RL112G-1 RL113G/RL113G-1
RL116/RL116-1 RL201/RL201-1
RL203/RL203-1 RL204/RL204-1
Brackets Brackets
Part Number Price Description Part Number Price Description
ST12A $2.00 Metal axial bracket for 12mm sensors, 1/pk ST12C $6.00 Metal right angle bracket for 12mm sensors, 1/pk
ST12A7W $6.00 316L stainless steel axial bracket for 12mm sensors, 1/pk ST12C7W $6.00 316L stainless steel right angle bracket for 12mm sensors, 1/pk
Brackets
Part Number Price Description
Plastic mounting bracket for use with M18 photoelectric switches. Has a ball-joint and set screws
ST02 $8.25 to adjust sensor orientation. Allows orientation in all directions for retroreflective and
through-beam sensors. (Will not work with C18 series).
Dimensions
inches [mm]
ST102 $3.00 Mounting bracket, 304 stainless steel, right-angle horizontal mount. Mounting hardware included. 0.05
ST103 $4.00 Mounting bracket, for prewired photoelectric sensors only, 304 stainless steel, protective vertical mount. Mounting
hardware included. 0.06
ST104 $4.00 Mounting bracket, for prewired photoelectric sensors only, 304 stainless steel, protective horizontal mount. Mounting
hardware included. 0.05
Dimensions
mm [inches]
ST102
ST101
ST103 ST104
Dimensions
mm [inches]
ST-S8-FRM
ST-5072