Professional Documents
Culture Documents
Aconex_damproofing
Aconex_damproofing
Mr ve
Z1_6Flags Cross Project Search cubuk
MESSAGE
Reference the mentioned meeting notes and today discussion, we would like to keep your consideration about dam
proofing bituminous application as below detail:
1. Recommended material sika igasol which is written in detail drawing, with 2 coat application
wet film thickness is ~1mm, dry film thickness is 350~500 Micron only. (see the attached
material data sheet detail.)
2. As per received specs required each coat thickness is 1mm and total 2mm. |(see the attached
spec detail.)
As per above statement and specs, its required min. 4~5 coats application that will affect below matters:
1. Pricing should re-create again as per material consumption & workmanship.
2. Waterproofing part needs to re-schedule again to consider more coats application and interval
of each overcoat.
Note: Material is not available in KSA. After issuing PO, will take min. 3-4weeks to receive as per supplier's comment.
Regards,
Vedat
From: W HADDAD
Sent: 04/08/2022 3:47:53 PM AST (GMT +03:00)
To: vedat cubukcu, Firas Geagea, Charbel Khoury, Jean SFEIR, Ryan Milton
Cc: Ayad Eljammal, Iain Fairbairn, Stephane Levenard, David Courtney
https://ksa1.aconex.com/Logon 1/1