Professional Documents
Culture Documents
F-05G_E_OP_01
F-05G_E_OP_01
F-05G_E_OP_01
1 Contents/Precautions
Contents Mail/Browser ................................ 64
docomo mail ..................................................................... 64
■ Basic package ..........................................................1 SMS ................................................................................... 66
■ Before using the terminal .......................................4 Browser ............................................................................. 68
■ Precautions (Always follow these directions) ......6 FSite .................................................................................. 74
■ Handling precautions ............................................18
■ Waterproofness/Dustproofness ..........................23 Camera ........................................ 75
Cautions on shooting ....................................................... 75
Before using the terminal ........... 30 Shooting still images ....................................................... 77
Part names and functions ................................................30 Shooting video ................................................................. 79
Basic operation .................................................................33 QR code reader ................................................................. 80
docomo nano UIM card ...................................................39
Battery pack ......................................................................40 Tools/Applications ....................... 82
Charging ............................................................................41
Turning power on/off .......................................................45 1seg ................................................................................... 82
Character entry .................................................................45 LINE ................................................................................... 86
Initial settings ...................................................................49 Schedule ........................................................................... 87
Task manager ...................................................................52 Alarm ................................................................................. 88
Memo ................................................................................ 89
Calculator .......................................................................... 90
Calling ......................................... 53 Timer ................................................................................. 90
Making a call .....................................................................53 SD card backup ................................................................ 91
Receiving a call .................................................................56
Operation during a call ....................................................57 Settings ....................................... 93
Redial/Received calls ........................................................58
Phone memo ....................................................................59 Settings menu .................................................................. 93
Dial/Receive call setting ...................................................59 Sound/Vib/LED ................................................................. 93
Phonebook ........................................................................61 Display & Wallpaper ........................................................ 95
Battery ............................................................................... 96
Dat/Air mode .................................................................... 96
2 Contents/Precautions
Lock & Security .................................................................98
Lang/Text ........................................................................106 Appendix/Index .......................... 138
Useful tools .....................................................................106 Menu list ......................................................................... 138
docomo service ..............................................................107 Troubleshooting (FAQ) .................................................. 140
Device mgt ......................................................................107 Warranty and After-Sales Service ................................ 146
Software update ............................................................. 149
Main specifications ........................................................ 153
Data management ..................... 113 Specific Absorption Rate (SAR) of Mobile Phones ..... 155
Storage (Internal storage) ..............................................113 Export Administration Regulations .............................. 160
microSD card (External storage) ...................................113 Intellectual Property Right ............................................. 161
File operations ................................................................115 SIM unlock ...................................................................... 163
Connecting with a PC .....................................................120 Index ................................................................................ 164
3 Contents/Precautions
・ Maintain a separate record of the data saved in the
Before using the terminal terminal by taking notes periodically or saving in
the external memory such as a microSD card or PC.
・ This terminal supports W-CDMA System. Note that DOCOMO assumes no responsibility for
any loss of saved contents of data resulting from
・ The terminal uses wireless transmission, it may not
function in locations where it is difficult for radio malfunction, repair, changing of the model or other
waves to penetrate, such as tunnels, underground handling of the terminal.
passages and some buildings, in areas where radio
・ In the terminal, as it is for a PC, some applications
waves are weak, or out of FOMA service area. Even that you install may give instability of the operation,
when you are in a tall building or condominium and or may send your location information or personal
information registered to the terminal to outside via
nothing blocks your view outside, your terminal
may not be able to receive or transmit signals. Also, the Internet and the information may be used
communication may be interrupted even when improperly. Please thoroughly check a provider and
operation status of the application etc. which you
there are strong radio waves with 4 signal status
icons on the terminal and you are not moving. want to use beforehand and then use it.
・ The terminal uses radio waves to communicate, it is ・ This terminal supports FOMA Plus-Area and FOMA
HIGH-SPEED Area.
possible that a third party may attempt to tap your
calls. However, the W-CDMA automatically applies
・ The terminal does not support i-mode sites
a confidential communication function to all calls, (programs) or i-αppli.
so even if a third party could tap a call, they only
・ You can use the terminal only with a docomo nano
UIM card. If you have a docomo mini UIM, UIM
hear noise.
・ Your terminal encodes voice communication as card, or FOMA card, bring it to a docomo Shop to
replace it with a docomo nano UIM card.
digital data. When you are operating your terminal
while moving to a location subject to weaker radio
・ Regardless of Manner mode or the volume settings,
shutter sound, auto focus lock sound, count down
wave conditions, the transmitted digital data may
sound for self timer and screen shot sound while
not be correctly decoded and as a result the
the camera is activated are emitted.
decoded voice may differ somewhat from the
actual voice.
・ To check your phone number, on the stand-by
screen, m→[Profile].
4 Contents/Precautions
・ The terminal automatically performs ・ The terminal supports only sp-mode, mopera U and
communication for synchronizing data, checking Business mopera Internet. Other providers are not
the latest software version, and maintaining a supported.
connection with the server, and for other purposes. ・ For details on the usage fee, refer to NTT DOCOMO
If you transmit a large amount of data, such as website.
when watching video, the packet communication
charge becomes high. Subscription to Packet Pack/
packet flat-rate service is highly recommended.
・ The software on the terminal can be updated with
the latest information.→P149
・ Display is manufactured by taking advantage of
highly advanced technology but some dots may be
always or never lit. Note that this is the
characteristics of display and not defect in the
terminals.
・ For commercially available option devices,
DOCOMO is not liable to any failures or the
malfunctions.
・ When the memory space of the microSD card or the
terminal is low, running applications may not
operate normally. In this case, delete the saved
data.
・ Applications and service contents are subject to
change without prior notice.
・ If you have lost your terminal, change your account
passwords using a PC to prevent others from using
your SNS and other services.
・ Set the security unlock method to ensure the
security of your terminal for its loss.→P102
5 Contents/Precautions
・The symbols below show specific directions.
Precautions (Always follow
This symbol denotes that the action is
these directions) prohibited.
Don’t
・Before using your terminal, or when necessary, This symbol denotes that disassembling
read the precautions below to ensure safe use and
the phone or its components is not
handling. After reading this manual, keep it No disassembly
allowed.
carefully.
・These precautions are intended to protect you and
others around you. Read and follow them carefully This symbol denotes that using the
to avoid injury, damage to the product or damage phone or its components in a bathroom
No liquids
to property. or other highly humid area is not
・The signs below differentiate between the levels of allowed.
danger that can occur if the product is not used
within the specified guidelines. This symbol denotes that using the
phone or its components with wet
No wet hands
This sign denotes that hands is not allowed.
death or serious injury
DANGER may directly result from This symbol denotes that an instruction
improper use. must be obeyed at all times.
Do
This sign denotes that
This symbol denotes that the equipment
death or serious injury
WARNING may result from Unplug
should be unplugged.
improper use.
6 Contents/Precautions
■ Precautions contain the description below.
Handling the terminal, battery pack, adapter, desktop Do not disassemble or remodel the
holder, and docomo nano UIM card (common).....7 equipment.
No disassembly
Handling the terminal ..................................................9 May cause fire, burns, injuries, electric shock.
Handling battery pack ................................................11
Handling the adapter and desktop holder................13
Handling the docomo nano UIM card ......................15 Do not let the terminal get wet with water,
Handling mobile phones near electronic medical drinking water, urine of pet animals,
No liquids
equipment................................................................15 perspiration, etc.
Material list .................................................................16 May cause fire, burns, injuries, electric shock.
Waterproofness→P23 "Waterproofness/
◆Handling the terminal, battery pack, Dustproofness"
adapter, desktop holder, and
docomo nano UIM card (common) Do not allow liquid (water, drinking water,
urine of pet animals, perspiration, etc.) to
No liquids
come into the charging jack or external
DANGER connection jack.
Do not use, store or leave the terminal in May cause fire, burns, injuries, electric shock.
Waterproofness→P23 "Waterproofness/
hot places (e.g. by the fire, near a heater,
Don’t Dustproofness"
under a kotatsu, in direct sunlight, in a car
in the hot sun). Use the optional devices specified by NTT
May cause fire, burns or injuries. DOCOMO for your terminal.
Do
May cause fire, burns, injuries, electric shock.
Do not put the terminal into heating
cooking device such as microwave oven or WARNING
Don’t
high-pressure container.
May cause fire, burns, injuries, electric shock. Do not throw the equipment or give a
strong force or hard shock to it.
Don’t
May cause fire, burns, injuries, electric shock.
7 Contents/Precautions
Keep conductive materials (metal pieces, CAUTION
pencil lead, etc.) from coming in contact
Don’t
with the charging jack or external Do not leave the equipment on unstable or
sloping surfaces.
connection jack. Do not put those Don’t
The equipment may fall and cause injuries.
materials inside the terminal.
May cause fire, burns, injuries, electric shock. Do not store the equipment in extremely
humid, dusty or hot areas.
Do not cover or wrap the terminal with a Don’t
May cause fire, burns, electric shock.
blanket etc. while using or charging.
Don’t
May cause fire or burns. Children using the equipment should be
instructed in proper operation by an adult.
Turn the terminal OFF and stop charging Do
Do not allow them to use the equipment
before entering a place such as a gas
Do
station where flammable gases could be without adult supervision.
May cause injuries.
generated.
The gas may catch fire. Store the equipment out of reach of infant.
Failure to do so may cause accidental ingestion,
If the equipment starts giving off a strange Do injury, or electric shock.
smell, overheats, becomes discolored or
Do Be careful especially when using the
deformed during use, charging or in
storage, immediately perform the terminal connected to the adapter
Do
following operations. continuously for a long time.
・ Remove the power plug from the wall outlet or If you watch a video or 1seg while charging the
cigarette lighter socket battery for a long time, the terminal, battery pack,
・ Turn the terminal OFF and adapter may be heated.
・ Remove the battery back from the terminal Directly touching a hot part for a long time, you
May cause fire, burns, injuries, electric shock. may have redness, itching or rash on your skin, or
it may result in low-temperature burns
depending on your constitution and/or health
condition.
8 Contents/Precautions
◆Handling the terminal Follow the instructions of each medical
facility for the use of mobile phones on
Do
WARNING their premises.
Turn off the terminal in a place where the use is
Do not direct the infrared data port toward prohibited.
your eye and transmit signals. May cause electronic equipment or electronic
Don’t
May cause harmful effect on eyes. medical equipment to fail or malfunction.
Do not direct the infrared data port toward When you talk by setting handsfree or ring
home electric appliances etc. equipped alert is sounding, keep the terminal away
Don’t Do
with infrared device when using infrared from your ear.
communication. And, when connecting the earphone/
May cause an accident because of malfunction of microphone etc. to the terminal and play a
infrared device. game or music, adjust the volume
Do not put foreign objects such as liquid moderately.
like water, metal pieces or burnable things Too loud volume may cause a hearing loss.
Don’t And, if you cannot hear the sound around you
into docomo nano UIM card slot or
clearly, it may cause an accident.
microSD card slot.
May cause fire, burns, injuries, electric shock. If you have weak heart, be careful when
setting the incoming vibrate alert
Turn off the terminal or put it in Airplane Do
(vibration) or alert volume setting.
mode before boarding an airplane.
Do May cause harmful effect on heart.
The use of mobile phones on airplanes is
restricted. Follow the instructions of each airline.
May cause on-board electronic equipment to fail
or malfunction.
Prohibited acts related to mobile phone usage on
an airplane may be punished by law.
9 Contents/Precautions
When you use electronic medical CAUTION
equipment, check with the equipment
Do
manufacturer to determine how the Do not swing the terminal around by
holding strap, etc.
device is affected by radio waves before Don’t
May cause accident such as injury to yourself or
using. others by hitting.
May cause harmful effect on electronic medical
equipment etc. Do not use the damaged terminal.
May cause fire, burns, injuries, electric shock.
Turn the terminal OFF near high-precision Don’t
electronic control equipment or electronic
Do When using the motion sensor, check the
equipment using low-power signals.
May cause the equipment to fail or malfunction. safety around you, hold the terminal
Don’t
* Examples of electronic equipment to avoid firmly, and do not shake it unnecessarily.
Hearing aids, implanted pacemakers or defibrillators, May cause accident such as injuries.
other electronic medical equipment, fire alarms,
automatic doors and other automatic control If the display part is accidentally broken
equipment. and the substance of the display such as
Users wearing implanted pacemakers or defibrillators Don’t
the liquid crystal leaks out, do not make
or other electronic medical equipment should check
with the manufacturer or sales outlet about the effect of the substance contact with your skin of
radio frequencies on the equipment. face or hands.
May cause loss of sight or skin problems.
When the display or camera lens is If the substance of the display such as the liquid
accidentally broken, be careful of broken crystal gets into your eyes or mouth, rinse it with
Do
glass or exposed internal parts of the clean water and see a doctor immediately.
terminal. Also, if it gets on your skin or clothes, use
something such as alcohol to wipe off, and wash
Surface of display and camera lens are made of
it off with soap or something similar.
plastic panel so that they are not to be shattered,
however, if you mistakenly touch broken or
exposed parts, you may be injured.
10 Contents/Precautions
To use the terminal in car, check with
◆ Handling battery pack
automobile manufacturer or dealer to ■ Check that the battery type matches the type
Do
determine how the device is affected by displayed on the battery pack label.
radio waves before using.
Display Battery type
In rare cases, using the phone in some vehicle
models can cause the vehicle's electronic Li-ion 00 Li-ion battery
equipment to malfunction. In that case, stop
using the terminal immediately.
DANGER
The use of the terminal may cause itching,
rashes, eczema, or other symptoms Do not connect a wire or other metal
Do
depending on the user's physical objects to the jack. And, do not carry or
Don’t
condition. If you develop skin problems, store the terminal with objects like a
stop using the phone immediately, and metal necklace.
May cause battery pack to ignite, burst, heat or
see a doctor. leak.
For material of each part →P16 "Material list"
Check the orientation of battery pack to
When opening and closing the terminal,
install it to the terminal, and do not try to
do not get your fingers or strap caught. Don’t
Do force the battery pack onto the terminal if
May cause accident such as injuries.
you are having trouble installing it.
When watching the display, take a certain May cause battery pack to ignite, burst, heat or
distance from the display in a fully bright leak.
Do
place. Do not throw the terminal into fire or
May reduce visual acuity. apply heat.
Don’t
May cause battery pack to ignite, burst, heat or
leak.
11 Contents/Precautions
Do not put excessive force such as sticking CAUTION
a nail into the terminal, hitting it with a
Don’t
hammer, or stepping on it. Do not discard the old terminal together
May cause battery pack to ignite, burst, heat or with other garbage.
Don’t
leak. May cause ignition or environmental destruction.
Tape the terminals of old battery packs to insulate
If the battery pack's fluid etc. contacts them, and then bring them into a sales outlet
eyes, immediately flush the eyes with such as docomo Shop. If your local municipality
Do has a battery recycling program, dispose of them
clean water and see a doctor right away. as provided for.
Do not rub the eyes.
May cause loss of sight. Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or
Don’t leak.
WARNING
If the battery pack seems to have If fluid etc. leaks out from the battery pack,
abnormalities such as deformation or do not make the fluid contact with your
Do
Don’t
scratches due to falling, never use it. skin of face or hands.
May cause battery pack to ignite, burst, heat or May cause loss of sight or skin problems.
leak. If the fluid etc. put into your eyes or mouth, or
contacts skin or clothes, immediately flush the
If the battery pack leaks or gives off a contacted area with clean water.
If the fluid etc. put into the eyes or mouth,
strange smell, immediately remove it from
Do immediately see a doctor after flushing.
the vicinity of open flames.
The vapors from leaking battery fluid may ignite,
fire or explode.
13 Contents/Precautions
Only use with the specified power source When you disconnect the power plug from
and voltage. When charging the terminal the outlet or cigarette lighter socket, do
Do Do
overseas, use AC adapter for global use. not pull the adapter cord with excessive
If incorrect voltage is used, this may cause fire, force. Instead, hold the adapter to
burns or electric shock. disconnect.
AC adapter : 100V AC
May cause fire, burns, electric shock.
DC adapter : 12V or 24V DC (specific for negative
ground vehicle) Remove or insert the adapter to the
AC adapter for global use : Between 100V and
240V AC (Connect to the AC outlet for internal terminal evenly without applying
Do
household use) excessive force.
May cause fire, burns, injuries, electric shock.
If the DC adapter's fuse blows, replace it
only with the specified fuse. Always remove the power plug from the
Do
May cause fire, burns, electric shock. For the outlet or cigarette lighter when not using
Unplug
specified fuse, see the instructions that come the adapter for an extended period.
with the DC adapter. May cause fire, burns, electric shock.
Wipe off any dust that accumulates on the Immediately remove the power plug from
power plug. the outlet or cigarette lighter socket if
Do Unplug
May cause fire, burns, electric shock. water or other fluids get into the adapter.
When you connect the AC adapter to an May cause fire, burns, electric shock.
outlet, firmly connect to the outlet. Always remove the power plug from the
Do
May cause fire, burns, electric shock. cigarette lighter socket when cleaning the
Unplug
equipment.
May cause fire, burns, electric shock.
14 Contents/Precautions
CAUTION When electronic medical equipment other
than implanted pacemakers or
Do not touch the adapter for a long time Do
defibrillators are in use outside of medical
while it is connected to the outlet or
Do facilities (such as in home care settings),
cigarette lighter socket.
check with the device manufacturer to
May cause burns.
determine how the device is affected by
◆Handling the docomo nano UIM card electrical signals.
The terminal's signals may affect the
performance of electronic medical equipment.
CAUTION
When you are in a crowd etc. and you have
Be careful of the cut surface when
difficulties to keep a distance of 15 cm or
handling a docomo nano UIM card. Do
Do more from others, turn the airplane mode
May cause injuries.
on or power off the terminal not to
◆Handling mobile phones near transmit signals.
electronic medical equipment There may be wearers of medical equipment
such as implanted pacemakers or defibrillators
around you. The terminal's signals may affect the
WARNING performance of electronic medical equipment.
Wearers of medical equipment such as When using the terminal in a medical
implanted pacemakers or defibrillators facility, be sure to observe the regulations
Do Do
must carry and use the terminal at least 15 of the facility.
cm away from the implanted device.
The terminal's signals may affect the
performance of electronic medical equipment.
15 Contents/Precautions
◆Material list Surface
Part Material
treatment
Surface
Part Material Case pad Urethane UV hard
treatment
acrylate resin coating
Exterior Movable PA-GF resin UV hard
Display panel Acrylate UV hard
case part Sub- coating
resin+PC resin coating
Display
Back panel Acrylate resin UV hard
Movable
coating
part
Display Camera lens, camera Acrylate UV hard
panel resin+PC resin coating
Fixed part PC-GF resin UV hard
Keypad coating Side key stopper ABS resin None
Fixed part Side keys PC resin UV hard
Battery coating
Hinge PC+ABS resin UV hard Keypad Urethane UV hard
section coating acrylate resin coating
Movable
Open assist button PC resin UV hard
side
coating
Hinge PC+ABS-GF UV hard
External Terminal PC resin UV hard
section resin coating
connecti coating
Fixed side
on jack
Flexure Elastomer resin None
Back cover PC-GF resin UV hard cap
coating Water stop Silicon rubber None
Back cover Elastomer resin None Tabs Elastomer resin None
water stop
External connection Stainless steel Tin plating
jack
16 Contents/Precautions
Surface Surface
Part Material Part Material
treatment treatment
Battery Battery PPS resin None Battery Battery PC resin None
contacts contacts Pack F32 pack
connector
Contacts Copper Ni plating +
Battery Beryllium Gold Gold
contacts copper plating plating
(base : Ni-
Label PET Mat varnish
Pd plating)
printing
Screw (battery install Stainless steel None
moisture High-quality Laminate
recess)
reaction paper (PET)
Battery Metal part Stainless steel Nickel seal
install plating
Charging Contacts Stainless steel Gold
recess
Inscription PET None jack plating
face
sticker
Attaching PPS resin None
moisture High-quality Laminate holder
reaction paper (PET) section
seal
17 Contents/Precautions
■ Desktop holder F49
Handling precautions
Surface
Part Material
treatment
◆ General
upper lower ABS resin Engraving
case ・F-05G is waterproof/dustproof; however, do not
allow water or dust to enter the terminal or come
Front hook, POM resin None in contact with accessories or optional devices.
side lever, - The battery pack, adapter, desktop holder, and
charging docomo nano UIM card are not waterproof/
jack (lever) dustproof. Do not use in a bathroom or other
Charging Phosphor bronze Gold highly humid area or do not let rain touch. Or
jack plating putting the terminal on your body, humidity of
(contacts) perspiration may cause internal corrosion and
malfunction. Note that malfunctions, which are
Rubber feet Urethane foam None determined to be caused by water as result of
Screws P tight pan head screw Trivalent inspections, are not covered by the warranty.
chromate Since these conditions are outside the scope of
the warranty, a repair, if at all possible, is charged.
External Stainless steel Tin plating ・Clean the terminal with a dry soft cloth (such as a
connection cloth for eyeglasses).
jack - Rubbing it roughly with a dry cloth may scratch
Label (upper Polyester film None the display.
case) - Drops of water or dirt left on the display may
cause stains.
Label (lower Coated paper None - If the terminal is wiped with alcohol, paint thinner,
case) benzine or detergent, the printing may disappear
or color may fade.
18 Contents/Precautions
・Clean the jack occasionally with a dry cotton swab ◆ The terminal
etc.
- If the jack is soiled, connection gets worse and it ・Avoid extreme temperature.
may cause power to be turned off or insufficient - Use the terminal where the temperature ranges
battery charge, so clean the jack with a dry cotton between 5 and 40℃ (limited to the temporary use
swab etc. in a bathroom etc. when temperature is above 36
Also, be careful never to damage the jack when ℃) and humidity ranges between 45 and 85%.
cleaning it. ・The terminal may affect land-line phones, TVs or
・Do not place the terminal near an air-conditioner radios in use nearby, so use it as far as possible
outlet. from these appliances.
- The rapid change in temperature may cause ・Maintain a separate record of the data you saved in
condensation, causing internal corrosion and the terminal.
malfunction. - If the data is deleted, DOCOMO assumes no
・When using, be careful not to subject excessive responsibility for the loss of any data.
force to the terminal or battery pack. ・Do not drop the terminal or subject it to shocks.
- If the terminal is crammed into a brimming bag or - May cause malfunction or damage.
placed in a pocket and sat on, display, internal ・Do not plug external devices into the external
PCBs or battery pack may be damaged or connection jack at a slant, or do not pull it forcibly
malfunction. And, if external devices are plugged while it is plugged.
into the external connection jack, the breakage or - May cause malfunction or damage.
malfunction may result. ・Do not close the terminal with the strap etc. held
・Do not rub or scrape the display with a metal piece inside.
etc. - May cause malfunction or damage.
- May scratch the display, causing malfunction or ・It is normal for the terminal to become warm
damage. during use or charging. Continue to use it.
・Read the instruction manuals supplied with ・Do not leave the terminal with the camera in areas
individual optional devices. under strong direct sunlight.
- May cause discoloring or burn-in of elements.
19 Contents/Precautions
・Use the terminal with the external connection jack ◆ Battery pack
cap closed.
- Dust and/or water brought into the terminal cause ・The battery pack is a consumable part.
malfunction. - Replace the battery pack if the terminal has
・Do not use the terminal with the back cover extremely short operation time on a full charge,
removed. though it may vary by operating conditions.
- May cause removal of battery pack, malfunction Purchase a new battery pack of the specified type.
or damage. ・Charge the battery in an area within the proper
・Do not put extreme thick sticker on the display or ambient temperature range (5-35℃).
keypad face. ・The operation time provided by the battery pack
- May cause malfunction, damage or erroneous varies by the operating environment and battery
operation. pack's deterioration.
・While microSD card is being used, do not turn off ・The battery pack may swell out as it comes to near
the terminal. the end of its lifetime depending on the usage
- May cause data loss or malfunction. conditions, but it is not a problem.
・Do not bring magnetic cards etc. close to the ・Be careful about the following points when
terminal or do not close the terminal with the cards preserving the battery pack.
held inside. - Storing under the state of the full charge (right
- Magnetic data in cash cards, credit cards, after charging ends)
telephone cards, floppy disks, etc. may be erased. - The battery has run out (the terminal cannot be
・Do not bring magnetized objects close to the turned on)
terminal. They may cause the battery pack performance to be
- Bringing strong magnetism close may cause a degraded or its lifetime to be shortened.
malfunction. A recommended battery level to store the terminal
is approximately 40% of remaining battery level as
a guide.
20 Contents/Precautions
◆Adapter and desktop holder - If the data is deleted, DOCOMO assumes no
responsibility for the loss of any data.
・Charge the battery in an area within the proper ・Take an expended docomo nano UIM card to a
ambient temperature range (5-35℃). sales outlet such as a docomo Shop for proper
・Do not charge the battery in the areas below. disposal in order to protect the environment.
- In areas of excessive humidity, dust or vibrations ・Take care not to scratch, touch accidentally or
- Near land-line phones or TV/radio short IC.
・It is normal for the adapter to become hot while - May cause data loss or malfunction.
charging. Continue to use it. ・Do not drop a docomo nano UIM card or subject it
・When using the DC adapter for charging, keep the to impact.
vehicle engine running. - May cause malfunction.
- The vehicle's battery could become flat. ・Do not bend a docomo nano UIM card or place a
・When using an outlet with a mechanism heavy object on it.
preventing unplugging, follow the handling - May cause malfunction.
instructions for that outlet. ・Do not install docomo nano UIM card into the
・Do not give strong shock. Do not deform the terminal with a label or sticker put on.
charging terminal. - May cause malfunction.
- May cause malfunction.
◆ Bluetooth function
◆docomo nano UIM card
・This terminal is equipped with the security
・Do not use excessive force to install/remove features, that are compliant with Bluetooth
docomo nano UIM card. standards for communication via Bluetooth.
・Note that DOCOMO assumes no responsibility for However, depending on the settings, there may
malfunctions occurring as the result of inserting not be enough security. Be aware of security risks
and using docomo nano UIM card with another IC when using Bluetooth.
card reader/writer. ・DOCOMO assumes no responsibility for any
・Always keep UIM ICs clean. information which may be leaked during
・Clean docomo nano UIM card with a soft, dry cloth communication via Bluetooth.
(such as a cloth for eyeglasses).
・Maintain a separate record of the data you saved in
docomo nano UIM card.
21 Contents/Precautions
・Frequency bands
Frequency bands used by the terminal Bluetooth Cautions on using Bluetooth devices
function are as below. In the bandwidth used by this terminal, in
a b c addition to home electric appliances such as a
microwave oven and industrial/scientific/medical
2.4FH/XX1 devices, in-plant radio stations used to identify
mobile objects used in production lines of a
d factory that require a license, specified low power
radio stations, or amateur radio stations that do
a 2.4 : Radio equipment that uses the 2400 MHz
not require a license (hereafter "other radio
band.
stations") can be in operation.
b FH/XX : The modulation is the FH-SS method or
1. Before using the terminal, check whether
other method (method other than DS-SS
"other radio stations" are in operation in your
method/DS-FH method/FH-OFDM composite
neighborhood.
method/OFDM method).
2. If radio wave interference occurs between the
c 1 : The expected interference distance is 10 m or
terminal and "other radio stations", use the
shorter.
terminal in a different location or "Turn the
d : All bandwidths between 2400
power OFF" to avoid the radio wave
MHz and 2483.5 MHz are used, and the
interference.
bandwidth used by mobile object identification
3. For details, contact "General Inquiries" on the
devices cannot be avoided.
last page of this manual.
Available channels vary by countries.
Use of Bluetooth function is limited in some
countries. Confirm regulations of the country/
region to use it.
To use in airplane, confirm with airline company in
advance.
22 Contents/Precautions
◆CAUTION
・Do not use a remodeled terminal. Using a
Waterproofness/
remodeled terminal violates the Radio Law/ Dustproofness
Telecommunications Business Act.
The terminal is compliant with rules on the With the external connection jack cap securely closed
technical standard conformance of specified and the back cover securely attached, F-05G provides
wireless equipment based on the Radio Law/ waterproofness of IPX5*1 and IPX8*2 and
Telecommunications Business Act, and as a proof dustproofness of IP5X*3.
of it, the "Technical Compliance Mark " is *1 IPX5 means that a phone keeps functioning after
depicted on the inscription sticker of the terminal. applying a jet flow of 12.5 L/min. from every direction
If you remodel the terminal by removing its screws, from a distance of approximately 3 m for at least 3
your certification of technical standard minutes using water nozzle in 6.3 mm inner diameter.
conformance becomes invalid. *2 For F-05G, IPX8 means that a phone keeps functioning
Do not use the terminal with its certification of after F-05G is slowly submerged to depth of 1.5 m in
technical standard conformance invalid as it static tap water at room temperature, left there for 30
violates the Radio Law/Telecommunications minutes and then taken out (Camera function cannot be
Business Act. used under water).
・Be careful when you use the terminal while driving *3 IP5X, a degree of protection, indicates that the phone can
a car etc. maintain its functionality and provide safe operation
There is a penalty for holding or using the terminal even when it has been shaken for 8 hours in an apparatus
while driving. containing dust particles 75 μm or less in diameter.
However, absolutely necessary cases such as
rescue of a sick person or maintaining public's
safety are exempted.
・Do not alter the basic software.
Repairs may be refused as a modification of
software.
23 Contents/Precautions
❖What you can do with ・You can use the terminal in a bathroom.
waterproofness of F-05G - Do not immerse the terminal into a bathtub. Also,
do not use the terminal in hot water. May cause
・You can use the terminal to talk or watch 1seg malfunction. If you should fall the terminal into the
without using an umbrella in the rain (with a bathtub, immediately pick it up to drain water in
rainfall of about 20 mm per hour). specified procedure (→P28).
- When your hands or the terminal are wet, avoid - Never put the terminal in hot spring water or
opening/closing the external connection jack cap. water containing soap, detergent or bath powder.
・The terminal can be washed with tap water at In case the terminal gets wet with water other than
room temperature. tap water, wash it in the procedure above.
- Holding the external connection terminal cap not - You can use the terminal within 2 hours in a
to open, wash the terminal with tap water without bathroom where the temperature ranges between
rubbing hard. 5 and 45℃ and humidity ranges between 45 and
- Do not apply water flow stronger than allowed (→ 99%.
P23). - Rapid temperature change may cause
- Do not use brush, sponge, soap, detergent, etc. condensation. If you bring the terminal from a
- If mud or dirt has adhered to your terminal, shake cold place to warm place such as a bathroom, wait
it several times in tap water put in a washbowl or until the terminal reaches the room temperature.
other container to rinse it off and then flush it with - Do not put hot water from a faucet or shower.
running water.
- Drain water in the specified steps (→P28) after
washing.
24 Contents/Precautions
◆To ensure waterproofness/ ■ How to open/close the external connection
dustproofness jack cap
Put your fingertip in the groove and pull open the
To prevent water or dust from entering the terminal, external connection jack cap in the directions
be sure to observe the following points. indicated by the arrows (a). After use, close the
・Firmly close the external connection jack cap and external connection jack cap securely and press it in
back cover. Even a minute object (such as a strand the direction indicated by the arrows (b).
of hair, a grain of sand, or a micro fiber) put ・Firmly press the areas indicated by to ensure
between the contact surfaces may cause water or that there are no gaps between the external
dust to enter the terminal. connection jack cap and the body.
・Do not poke the microphone, earpiece, speaker,
external connection jack cap, or other components
with a sharp object.
・Do not let the terminal fall. Doing so may scratch
the terminal, causing its waterproof/dustproof
performance to degrade.
・The rubber gaskets on the external connection jack a
cap and back cover play an important role in Groove
maintaining the waterproof/dustproof
performance. Do not remove or scratch the rubber
gaskets. Also, prevent dust from adhering to them.
25 Contents/Precautions
■ How to remove the back cover ■ How to attach the back cover
26 Contents/Precautions
Observe the following precautions to use the
It is recommended to replace the parts once every terminal properly.
two years to maintain the waterproof/dustproof ・Accessories and optional devices are not
performance, regardless of whether an waterproof/dustproof. Do not use the terminal in a
abnormality is present. Upon request, DOCOMO location exposed to water, such as a bathroom,
will replace the parts for a fee. Take your terminal shower room, kitchen, or lavatory, even if the AC
to a sales outlet such as a DOCOMO-specified adapter is not connected to the holder.
repair office. ・Do not apply water flow stronger than allowed (→
P23). Even if the F-05G is waterproof in IPX5
waterproof, water may enter inside from a
◆Important precautions damaged section and cause troubles such as
electric shocks or corrosion of the battery.
Do not perform actions shown in the illustrations ・If the terminal gets wet with salt water, sea water,
below. refreshing beverage, etc. or mud or soil adhered,
<Example> wash it immediately. If they dry out, it is hard to
remove the dirt and it may cause damage or
malfunction.
・Do not put the terminal in hot water, use it in a
sauna or apply hot airflow (from a hair dryer etc.) to
Using Soap/Detergent/ Washing with Machine-washing
Bath powder brush/sponge
it.
・Do not move the terminal in water or slam the
terminal against the surface of water with the
terminal opened.
・When you use the terminal in swimming pool, obey
Applying strong Soaking in Using in
rules of the facility.
water flow ocean water hot spring ・The terminal does not float on water.
・Do not leave water on the terminal. May short-
circuit the charging jack or, in a cold region, cause
the water to freeze, resulting in a malfunction.
・Do not leave water on the microphone, earpiece,
speaker. Such water may interfere with talking.
27 Contents/Precautions
・If the back cover is damaged, replace it. Water may ◆ Draining water
enter inside from a damaged section causing
troubles such as electric shocks or corrosion of the When the terminal is wet, water may flow out after
battery. wiping it off; drain the water in the following steps.
・If the terminal gets wet with water or other liquids a Hold the terminal firmly and wipe off moisture on
with the external connection jack cap or the back the terminal surface and back side with dry, clean
cover open, the liquid may get inside the terminal cloth etc.
causing electric shocks or malfunction. Stop using
the terminal, turn the power OFF and contact a
DOCOMO-specified repair office.
・If the rubber gaskets on the external connection jack
cap and back cover are damaged or deformed,
contact a DOCOMO-specified repair office.
28 Contents/Precautions
Swing the terminal with the
◆ Charging
speaker above to drain water off Check the following during and after charging.
・Never try to charge the battery when the terminal is
wet.
・When charging the battery after the terminal gets
wet, adequately drain the terminal and then wipe
off the remaining water with a dry, clean cloth or
something similar before docking the terminal on
the desktop holder or opening the external
c Swing the terminal about 10 times against a dry, connection jack cap.
clean cloth etc. to wipe off water remaining in the ・If the battery has been charged with the external
microphone, earpiece, speaker, hinge section, key, connection jack cap open, close the cap firmly after
charging jack, etc. charging. It is recommended to use the desktop
holder for charging to prevent water or dust from
entering the terminal through the external
connection jack.
・Do not use the AC adapter or desktop holder in a
bathroom, shower room, kitchen, lavatory, or other
humid area. May cause fire or electric shock.
・Do not touch the AC adapter or desktop holder with
wet hands. May cause electric shock.
29 Contents/Precautions
Before using the terminal f
g
h
Part names and functions i
d j
a
e
b l
m
n
c
g o
a m
h
b i
c
j
d
e
f k
l
operation)
b
When a number is allocated to a menu item (Short-
cut number), select the corresponding key (0 -
9, *, #) to select the menu item.
・ Press the item number indicated on the target menu
item. For the menu item without item number,
press multi-cursor key to select. c
・ Short-cut of the menu items→P138
d
m C
a
a g I
b
d
c
a Application notification
Select a notification to check the supported
functions and activate.
b Switch
Switch the notification display.
Power Plug
AC adapter
Indicator LED
◆ Turning power on
1f (2 sec. or more)
The terminal vibrates and the startup screen
b
e
c
appears. Text input screen
・ For the first activation, make initial settings.
→P49 a Cursor (blinking)
Indicate location where characters are entered or
◆ Turning power off inserted.
b Submenu
1 f (1 sec. or more) Edit text, insert quote phrases, make settings for
character entry, etc.
2 [Power off]→[OK]
The terminal turns off vibrating.
c TextMode
Switch input modes. You can switch the input
mode to hiragana/kanji, katakana, alphabet,
✔INFORMATION number.
・ Pressing f for 3 seconds or more also turns the d input mode
power off.
◆ Editing text
You can copy texts in the character entry screen, web
page or received mail and cut and paste texts in the
character entry screen.
・ Operation method may vary by application.
2 keyboard→[Set
On the physical keyboard, select a
up keyboard layouts]→
Mark a keyboard layout→c→Select a
keyboard layout
6 [OK]
The stand-by screen appears.
4 On the Setting of docomo service, [Start
setting]
✔INFORMATION
・ When a confirmation screen for sending terminal
error information appears, select [OK].
・ If a software update confirmation screen appears,
select [OK].
・ You can make docomo service settings also on the
stand-by screen, m→[Settings]→[docomo
service].
1@ (1 sec. or more)
The restartable applications appear.
・ Select a thumbnail to display an application.
・ Move cursor to the thumbnail→Press m
[End] to end the application. To end all
applications, press a [End all].
53 Calling
✔INFORMATION ◆ Emergency call
・ Touch-tone signals may not be received depending
on the receiving device. Emergency call Phone number
Police call 110
◆ Making a call with speed dial Fire and emergency rescue 119
You can make a call through simple operations by Coast guard 118
registering a contact to a speed dial.
・ Register a contact to a speed dial in advance.→P54 ・ This terminal supports "Emergency call location
notification". If you use the terminal to place a call
the stand-by screen, 0 - 9→
1 On
n
to emergency numbers such as 110, 119, or 118, the
information of a location where you are calling from
(location information) is automatically notified to
・ When the call confirmation screen appears, the Emergency call acceptance organization such
select [OK].
as the Police Station. The Emergency call
❖Registering contact to speed dial acceptance organization may not be able to figure
out your exact location depending on the location
the stand-by screen, m→[Phone]→
1 On
[Speed dial setting]
where you place a call or radio wave condition.
When location information is notified, name of
Emergency call acceptance organization you are
calling to will appear.
2 book]→Select
Select a speed dial→[Choose from phone
a contact
If you make a call hiding your caller ID, such as by
entering a phone number with "184" for each call,
✔INFORMATION the location information and phone number are not
notified. However, the Emergency call acceptance
・ If you edit a contact registered to a speed dial using organization may decide to obtain the location
phonebook application, the phone number information and phone number regardless of your
registered to a speed dial is not updated. To update settings when they consider it is necessary for
the phone number, register the speed dial again. lifesaving, etc.
54 Calling
Note that the areas/time for which the "Emergency ◆ International call (WORLD CALL)
call location information" is ready to be used vary
depending on the preparatory state of each Enter "+" to make an international call. To enter "+",
Emergency call acceptance organization. press 0 for 1 second or more.
・ When you call the Police (110), Fire/Ambulance ・ To use overseas, refer to "Outline of international
(119), or Maritime rescue (118) from the terminal, roaming (WORLD WING)".→P131
clearly indicate that you are calling from a mobile ・ For details of "WORLD CALL", contact "General
phone, then give your present location and mobile Inquiries" on the last page of this manual.
phone number. Also, make a point to call in a On the stand-by screen, 0 (1 sec. or
stationary position to prevent the call from being 1 more)→Enter "Country code-Area code
dropped. Do not power off the terminal for at least
10 minutes after the emergency call just in case the (City code) without leading 0 and phone
Police or Fire/Ambulance may have to get in contact number"→n
with you.
・ Note that you may not connect to the local Fire ・ If [Automatic conversion] for [Int'l dial
assistance] is set to ON, "International dial
Department or Police Station depending on where
assist" screen appears when sending. Select
you are calling from.
[Original number] or [Converted number].
・ In Japan, if the docomo nano UIM card is not
inserted, emergency calls 110, 119 and 118 cannot
・ In some countries and areas such as Italy, "0" is
required.
be made on the PIN code entry screen, during PIN
code lock/PUK lock or while updating software.
・ When selecting from the country list to enter "+
country code", enter the area code (city code)
・ If you dial 110, 119, or 118 overseas, an emergency
and phone number→m [Submenu]→[Call
call screen may appear but the call is normally sent.
option]→[International call]→[ON]→[Country
・ If you make an emergency call with Reject call
code]→Selecr a country→Press m [Call]/
settings enabled, Reject call settings will be
n.
disabled.
55 Calling
◆ Rejecting a call
Receiving a call
You can disconnect a call without receiving.
receiving a call, m [Submenu]→
1 A call is received 1 When
[Reject call]
・ Press @ to stop ringtone or vibration.
56 Calling
e Call time
Operation during a call f Speaker phone is ON/OFF
Press C to set speaker phone ON/OFF.
g Mute ON/OFF
The following operations are possible in the screen
Press I to set Mute to ON/OFF.
during a call.
h On-hold
Press g to hold on call/cancel on-hold.
d
✔INFORMATION
・ Please note the following when calling with the
speaker phone.
a
- Use the earphone/microphone when making a call
outdoors, in a noisy place or a reverberant place.
e - Decrease volume when calling with the speaker
b f phone or the voice cracks.
c g
h ◆ Adjusting listening volume
a Name or phone number Change listening volume while calling to make it
b Submenu easier to be heard.
Press m to display Profile/Received calls/Redial/
Schedule/Memo, switch to Bluetooth call, or set
Voice clear/Voice slowing or Close settings.
1 During a call, j
c Phonebook ◆ Enabling/disabling Voice clear
Press a to display phonebook.
Improve call sound to be heard clearly by
d Status of Voice clear/Voice slowing
emphasizing the other party';s voice or adjusting the
While Voice clear activates, it recognizes the
listening sound.
ambient condition and adjusts the sound quality
During a call, m [Submenu]→[Clear
suitable. Depending on the recognized ambient,
"Quiet", "Noisy", etc., is displayed.
1 voice ON]/[Clear voice OFF]
57 Calling
◆ Enabling/disabling Voice slowing d Display of phone memo
58 Calling
Phone memo Dial/Receive call setting
Set phone memo or play/delete recorded phone Make various settings for DOCOMO network
memos. services, call and Internet call.
the stand-by screen, m→[Phone]→
1 On
[Recorded msg.]
◆ Network service
You can use the following docomo network services.
2 Set required items
Enable Recorded messages : Set ON/OFF of 1 On the stand-by screen, m→[Phone]→
phone memo.
[Call log/Call settings]→[Network
・ If number of saved phone memos exceeds the service]
saving limit, the terminal does not answer calls
with phone memo even when the setting is
enabled.
2 Set each item
Voicemail service : Start/stop the service, or set
Recorded messages : Display a list of recorded call time, etc.
phone memos. Select a phone memo to play the Call forwarding service : Start/stop the service,
message. change forwarding number, etc.
・ To delete one phone memo, move the cursor to Call waiting : Start/stop the service, or check the
a phone memo→I [Delete]→Select [Yes]. settings.
To delete all phone memos, m [Submenu]→ Caller ID notification : Set notification or confirm
[Delete all]→Select [Yes]. When the error settings.
screen appears, select [OK]. Nuisance call blocking : Register, remove, check
・ Up to 60 seconds per message and up to 10 registered numbers, or the advanced settings.
messages can be recorded for phone memo. Caller ID request : Start/stop service, or check the
Recorded messages settings : Set answer time or settings.
reply message. Second call settings : Start/stop the service, or
check the settings.
Call notification : Start/stop the service, or check
the settings.
59 Calling
English guidance : Set or check the settings. Reject anonymous call : Set whether to reject
Remote operation : Start/stop the service, or private number call.
check the settings. Reject payphone call : Set whether to reject call
Public mode (power OFF) : Start/stop the service, from pay phone.
or check the settings. Reject unknown call : Set whether to reject call
unknown call.
◆ Overseas setting Blacklist : Set whether to reject call set in the
blacklist settings.
For details, refer to "Setting international roaming" Blacklist settings : You can add up to 100 phone
(→P135). numbers for rejecting calls.
the stand-by screen, m→[Phone]→
1 On
[Call log/Call settings]→[Roaming
Set ring start time : Set delayed ring alert not to
answer a call immediately from a party not saved
in phonebook or such call with no caller ID
settings] notification.
Any key answer : When receiving a call, you can
2 Set each item answer a call by pressing any key (0-9,
g, *, #) in addition to n.
◆ Incoming call settings Open and answer : You can answer a call by
opening the terminal.
the stand-by screen, m→[Phone]→
1 On
[Call log/Call settings]→[Incoming call ◆ Outgoing call settings
settings]
the stand-by screen, m→[Phone]→
1 On
2 Set each item
Reject call settings : Make settings for rejecting
[Call log/Call settings]→[Outgoing call
settings]
calls.
Reject call setting : Set Reject call settings ON/
OFF. 2 Set each item
Sub address settings : Set whether "*" in phone
Reject unregistered call : Set whether to reject number is identified as a sub address separator.
incoming calls unregistered in the phonebook. Prefix settings : Set a number added before
phone number when making a call.
60 Calling
◆ Other setting
Phonebook
the stand-by screen, m→[Phone]→
1 On
[Call log/Call settings]→[Other settings] You can register phone numbers, email addresses,
etc. to the phonebook. You can contact registered
2 Set each item
Call time : Set call time.
parties through simple operation.
・ For the first time activation of phonebook (including
Cumulated call time : Display cumulated call time. after the application is initialized), "Use of Cloud"
Reset cumulated call time : Reset cumulated call screen appears and you can start use of cloud.
time.
Auto-reset : Set whether to reset cumulated call ◆ Adding an entry to the phonebook
time on the 1st day of every month.
On the stand-by screen, u→C
Close settings : Set the operation when the
terminal is closed.
1 [Register]→Set each item→C
Voice adjust : Adjust the listening volume [Register]
automatically for making it easy to understand.
Contact docomo : Make a call to each DOCOMO ✔INFORMATION
inquiry office.
・ You can also add phonebook entry from the redial/
ドコモ故障問合せ (DOCOMO repair office) : Make
a call to inquiry for repairs of DOCOMO repair call history.
office. ・ You can also register a phonebook entry on the
ドコモ総合案内・受付 (DOCOMO General stand-by screen by entering a phone number→g
Inquiries) : Make a call to docomo information [Register].
center.
海外紛失・盗難等 (For lost, theft, etc. while
overseas) : Make a call to the office for lost, theft,
etc. while overseas.
海外故障 (For malfunction while overseas) : Make
a call to the office for malfunction while overseas.
Open source licenses : Confirm open source
licenses.
61 Calling
◆ Checking/using phonebook ❖Creating/sending SMS
1 On the stand-by screen, u
Phonebook list appears.
1 Select a contact in the phonebook list
2 Move the cursor to a phone number→
C [SMS]→Create/send SMS
a
❖Creating/sending docomo mail
b
1 Select a contact in the phonebook list
a Index
2 docomo
Select a mail address→Create/send
mail
Search entries in the order of Japanese
syllabary. ◆ Deleting a phonebook entry
b Contacts
62 Calling
◆ Editing a phonebook entry ◆ Backing up/restoring phonebook
the phonebook list, m [Submenu]→
1 Inm
the phonebook list, select a contact→
[Submenu]→[Edit contact]→Edit
1 In[SD/SIM card/common]
each item→C [Register]
2 Select an item
Backup/restore to SD card : Activate SD card
◆ Using Group
backup to back up/restore contacts to/from
On the stand-by screen, m→ [Phone] microSD card.→P91
1 →[Phonebook]→[Group list]
Restore from SIM card : Restore contacts from
docomo nano UIM card.
m [Submenu]→[Add group]→Enter a Send all data (common) : Send contacts via
2 group name→[OK]
docomo mail or Bluetooth.
63 Calling
・ To add more addresses, press a [Add].
Mail/Browser ・ To delete an address, move the cursor to the
address→ Press I [Delete] and follow the
onscreen instructions.
65 Mail/Browser
❖Registering contacts to Quick mail ✔INFORMATION
・ To set not to receive docomo mail automatically, on
On the stand-by screen, m→ [Mail]→
1 [Quick Mail Settings]
the stand-by screen, a→[Mail settings]→
[Communication setting]→[Auto reception setting]
→Select [Confirm every time]/[OFF].
2 book]→Select
Select a Quick Mail→[Choose from phone
a contact ❖Check new mail
✔INFORMATION You can make inquiry for docomo mail delivered
・ If you edit a contact registered to Quick mail using while you were out of service area or the power was
phonebook application, the mail address registered turned OFF.
On the stand-by screen, a (1 sec. or
to Quick mail is not updated. To update the mail
address, register Quick mail again.
1 more)
◆ Receiving docomo mail
The terminal receives docomo mail automatically. SMS
1 Notification icon (→P35) appears on the status
Receives docomom mail automatically You can send and receive text messages with a
mobile phone number as the destination.
bar. * For details on a number of characters that you can send/
receive etc, refer to "Short Message Service (SMS)" on the
On the stand-by screen, g→Select
2 docomo mail notification→Select a
NTT DOCOMO website.
66 Mail/Browser
3 Select the Message field→Enter message
→C [Send]
◆ Displaying SMS
67 Mail/Browser
◆ Setting SMS
Browser
On the stand-by screen, d→m
1 [Submenu]→[Settings] You can view web pages like on a PC using Browser.
On the terminal, Browser can be used over a packet
2 Set each item
Ring tone : Set ringtone when receiving an SMS.
communication.
68 Mail/Browser
◆ Start Browser ◆ Key operations on web page
Display the web page set in "Home page setting" of The following key operations are possible on the web
Browser settings. page screen.
Move the pointer (Mouse mode) : K
On the stand-by screen, I→ [Start
1 Browser] Move the cursor (Mobile mode) : k
・ Mouse mode/Mobile mode→P70
Web page screen appears. Selecting an item/Moving to linked destination : g
・ When the connection confirmation screen [Select]
appears, check the content and select [Yes]. ・ In Mouse mode, the pointer changes to when the
item or link can be operated.
◆ Google Search Scroll the screen : a[↑]/I[↓]
Display Google™, the search engine site. You can Zoom in/out : 3/1
search in the website using Google. Volume control : 7/9
Using the submenus : m [Submenu]
On the stand-by screen, I→ [Google
1 Search] Return to previous page : c
・ For the first page, c→Select [Yes] to end
Web page screen appears. Browser.
・ When the connection confirmation screen ・ While loading the page, press c to stop loading.
appears, check the content and select [Yes]. Display site viewing history : c (1 sec. or more)
◆ Input URL/Search
You can display/search in the website by entering
URL or keywords.
On the web page screen, m
1 [Submenu]→[Input URL/Search]
2 Enter a URL/keyword
69 Mail/Browser
◆ Operations in Mouse/Mobile mode ✔INFORMATION
Mouse mode : Operate the following pointers in 8 ・ When connecting a Bluetooth mouse pad, switch to
directions using K like the mouse cursor. Mobile mode. If a Bluetooth mouse pad is connected
・ : Normal pointer. during Mouse mode, two pointers appear and you
・ : Appears when the pointed item such as a link or cannot operate the terminal correctly.
image is selectable.
・ : Appears when dragging or scrolling the screen ❖Drag mode
during Drag mode. In Mouse mode, you can see the screen beyond the
・ : Appears when selecting scroll start point or display by scrolling, drag an item and drop it.
dropping during Drag mode.
Mobile mode : Move the cursor frame using k like <Example> Scrolling the screen
the key operation of mobile phone. the web page screen, g (1 sec. or
✔INFORMATION
1 On
more)
・ Use the pointer when copying text (→P71) or The pointer switches to .
downloading images (→P72). ・ To cancel Drag mode, press g for 1 second or
more.
❖Switching Mouse mode/Mobile K to scroll by moving
mode 2 Use
The pointer switches to .
→g
70 Mail/Browser
✔INFORMATION
・ If the web page cannot be operated in Mobile mode
2 Move the cursor to a tab→C [Close]
・ You can close all tabs without the cursor at once
because the cursor frame does not appear, switch to by m [Submenu]→[Close other tabs].
Mouse mode. ・ When ending Browser, all tabs are closed.
・ If the screen cannot be scrolled by moving the
◆ Searching text on page
pointer in Mouse mode, scrolling may be done by
Drag mode. On the web page screen, m
・ Note that neither Mouse mode or Mobile mode 1 [Submenu]→[Find on page]
cannot operate depending on the web page.
71 Mail/Browser
◆ Convenient functions 2 Operate each item
Display link on new tab : [Open in new tab]
You can download images and display links on new
Save web page in linked destination[Save link]
tabs.
You can view the saved web page during offline.
■ Downloading images →P74
Copy URL : [Copy URL]
On the web page screen, m
1 [Submenu]→[Save images] ◆ Bookmark
Switches to image saving mode.
K to move the pointer to an image ❖Registering a bookmark
2 Use
→g [Select] On the web page screen, m
An image is downloaded.
1 [Submenu]→[Add bookmark]
・ When the image can be downloaded, the Details of bookmark are displayed. You can
pointer switches to .
change the title, location to be added, etc.
・ Select [View/Play] to view the downloaded
image.
・ Select [Downloads] to display the download list 2 C [Save]
screen. ❖Displaying web pages from
■ Operating links bookmarks
On the web page screen, m
1 to
On the web page screen, move the cursor
a link/use K to movethe pointer to a
1 [Submenu]→[Bookmark list]
link→m [Submenu]→[Selected link] The bookmark screen (list) appears.
・ In Mouse mode, the pointer changes to when
the link can be operated. 2 Select a bookmark
Editing : m [Submenu]→[Edit or move
bookmark]→Set each item→C [Save]
72 Mail/Browser
Deleting : Move the cursor to a bookmark→m ✔INFORMATION
[Submenu]→[Delete]/[Delete all bookmarks]→
・ On the site viewing history screen, press m
[Yes]
[Submenu] to open a log in new tab or delete logs,
✔INFORMATION etc.
・ On the bookmark screen (list), press m
[Submenu] to open a bookmark in new tab or ◆ Browser settings
manage folders, etc.
On the stand-by screen, I→ [Browser
・ On the stand-by screen, press I for 1 second or 1 settings]
more, or m→[Web]→Select [Bookmarks] to
display the bookmark screen (tile). By default, you
can also display the bookmark screen by pressing 2 Set each item
Home page setting : Register a URL of web page
o of My feature button. displayed when operating "Start Browser" or
On the bookmark screen (tile), press C [Details] open a new tab.
to display the bookmark screen (list). Load images : Set whether to display images on
web pages.
◆ Site viewing history Download data to : Set the data saving
destination.
On the bookmark screen (list), C
1 [History] Privacy & security : Set the functions that use
viewing information for improving user-
friendliness.
Site viewing history screen appears.
Accessibility : Set text scaling and minimum font
・ Press C [Bookmark] again to return to the size for screen display.
bookmark screen (list).
Advanced : Make settings for information that
2 Select a log
・ To display the history of frequently viewed web
sites can use for improving user-friendliness.
73 Mail/Browser
◆ Viewing download history
You can check the history of downloaded images, etc.
On the web page screen, m
1 [Submenu]→[Downloads]
2 Select a log
FSite
You can use the game corner and @Fケータイ応援団
(@F mobile phone supporters) in Fujitsu official
website.
the stand-by screen, m→[FSite]→
1 On
[ゲームコーナー (game corner)]/[ケータイ
応援団 (Mobile phone supporters)]
Connect to Fujitsu official website.
・ When the connection confirmation screen
appears, check the content and select [Yes].
・ For using Game corner and @Fケータイ応援団
(@F mobile phone supporters), packet
communication charge is applied separately.
Subscription to Packet Pack/packet flat-rate
service is highly recommended.
74 Mail/Browser
・ Regardless of Manner mode or the volume settings,
Camera auto focus lock sound, shutter sound, count down
sound for self timer and screen shot sound while
the camera is activated are emitted.
・ If you do not operate for approximately 2 minutes
Cautions on shooting during stand-by, the camera operation will be
ended.
・ When you are approximately 10 cm or more away
・ Although the camera is manufactured using from an object, the camera automatically focuses
extremely high-precision technology, it may on a pointed object by detecting the terminal
contain dots or lines that are always lit or that do movement.
not light. When shooting under low light
conditions, in particular, white lines or random
color dots are likely to appear as noises. This is not
a malfunction.
・ When activating the camera, white stripes may
appear on the screen. This is not a malfunction.
・ When the terminal is in high temperature state for a
long time, the camera may not be available. Wait
until the terminal cools down to use again.
・ When the battery is low, the camera may not be
available. Fully charge the terminal before using the
camera.
・ The captured images may be different from actual
objects for color and brightness.
・ If you try to shoot an object in an environment with
intense light source like the sun etc., the images
may be dark or noisy.
・ Fingerprints or fats and oil on the lens can affect
images. Wipe with a soft cloth before shooting.
・ The battery consumption is faster when using the
camera.
75 Camera
◆ Shooting method
Copyrights and portrait rights
Avoid reproducing, altering, or editing taken or Open the terminal to shoot.
recorded pictures or sounds using the terminal
without the copyright holders authorization,
◆ Shooting image size of Camera
because, except for personal use etc., they are You can set the following shooting image sizes.
prohibited by the copyright law. Avoid using or
altering pictures of others without their consent, ■ Still images
because they may infringe on portrait rights. ・ Max 8MP 3264×2448 (4 : 3)
Note that taking photos or recordings at some ・ Full HD 1920×1080 (16 : 9)
demonstrations, performances or exhibitions ・ Fit screen 854×480 (16 : 9)
may be prohibited even when only for personal ・ Mobile email 640×480 (4 : 3)
use.
■ Videos
Please be considerate of the privacy of individuals
around you when taking and sending photos ・ HD 1280×720 (16 : 9)
using camera-equipped mobile phones. ・ Mobile email 640×480 (4 : 3)
If you cause any trouble to public using the ・ QVGA 320×240 (4 : 3)
terminal, you may be punished under law or ✔INFORMATION
regulations (for example, nuisance prevention
ordinance). ・ The file size that can be sent/received with a docomo
mail is up to 10 MB including text and attachment
file. Therefore, to attach a longer video, setting
"QVGA 320×240" for the shooting image size is
recommended.
76 Camera
◆ Viewing shooting screen
Shooting still images
the stand-by screen, C
1 On
A still image shooting screen appears.
b
a
2 Display
→g[Cap]
an object on the shooting screen
77 Camera
■ Auto focus ◆ Shooting settings for still image
When the distance from an object is approximately 10
cm or more, the camera automatically focuses on a From the still image shooting screen, press m to
pointed object. When the object is focused on, the perform the following operations.
focus frame turns green. ■ Switch camera-mode
・ When an object includes people, face detection Select a camera mode from PHOTO/MOVIE/QR
frame appears first to be focused on. CODE.
・ You can also focus on the subject by enabling the
auto focus manually.→P77 ■ Select photo size
Select shooting image size.
■ White balance
・ When you activate Camera from another
Automatically adjust for shooting in natural color application such as Phonebook while Shooting
shade under various sources of light (sunlight, cloudy Image size is set to [Max 8MP 3264×2448], an
sky, artificial source of light such as incandescent or image size is changed automatically to [Full HD
fluorescent). 1920×1080].
■ Scene mode ■ Select a saving destination
Automatically recognize according to object and Select data saving location (Terminal/microSD card).
circumstance and switch suitable shooting mode.
・ When QR code is displayed, QR code is scanned ■ Self timer
and results are shown. Set to shoot a picture 2 seconds, 5 seconds, 10
seconds after the shutter is pressed.
■ Automatic exposure
Automatically adjust exposure according to the
ambient lighting. If the face detection frame of the
auto focus function is displayed, it will be fixed
depends on the brightness of the face.
■ Adjust flicker
Reduce flicker noise or stripe pattern emerged under
a fluorescent lamp etc.
78 Camera
Zoom*:j
Shooting video Playing taken videos : C[Album]
・ When it is pressed before shooting, the video list is
the stand-by screen, m→[Camera] displayed.
1 On
→[Movie]
* Operations can be performed while recording.
79 Camera
◆ Shooting settings for video ◆ Reading with QR code reader
From the video shooting screen, press m to ・ Scan using the camera with the distance of
perform the following operations. approximately 10 cm or more from an object (QR
code).
■ Switch camera-mode ・ When the distance from an object is approximately
Select a camera mode from PHOTO/MOVIE/QR 10 cm or more, the camera automatically focuses
CODE. on a pointed object. You can also focus on the
■ Select photo size subject by enabling the auto focus manually.→P80
Select shooting image size. ・ If the QR code is not scanned well, try to change the
distance between the QR code and camera, the
■ Select saving destination angle or direction of camera.
Select data saving destination (Terminal/microSD
card). 1 On the stand-by screen, C
・ If the selected saving destination is low on memory,
a message appears and switches saving destination 2 m[Settings]→[MODE]→[QR CODE]
The QR code shooting screen appears.
temporarily (recording stops during recording).
3 Display
→Scan
a QR code on the shooting screen
QR code reader A confirmation sound is played when scanning is
complete and the scanned data appears.
Scan QR code data and use it. Scanning divided data :
・ QR code cannot be scanned for some versions (type One data item divided into multiple (up to 16) QR
and size). codes can be scanned and be displayed as a
・ Scratches, dirt, damages, low print quality and the combined data. Continue reading if unscanned
strong reflection of light may disable code reading. data exists.
Manual activation of auto focus : g[AF]
80 Camera
4 Check scanned data
Saving data: On the scanned data,
m[Submenu]→[Save to history]→Select
history field
Displaying history : On the QR code shooting
screen, m[Submenu]→[History]→Select a
history
81 Camera
・ Information displayed in the area of data
Tools/Applications broadcasting is "data broadcasting" and "data
broadcasting site" information.
"Data broadcasting" information is carried in a
broadcast, together with images, voice and sound,
1seg and "data broadcasting site" information is used to
access sites provided by the TV broadcaster
(broadcast station).
1seg is a terrestrial digital TV broadcasting service Packet communication charge is applied when
for mobile devices that can receive data broadcasting accessing a site such as a "data broadcasting site"
together with images, voice and sound. You can also or others.
use interactive services using communication Some sites require information charges to be used.
function of mobile devices and detail information via
communication. ◆ About signal
・ For details on the "1seg" service, check the
following website. 1seg is one of the broadcasting services, and the
The Association for Promotion of Digital receiving signal (broadcast) differs from that of the
Broadcasting : http://www.dpa.or.jp/english/ FOMA service. For this reason, the signal cannot be
received at places where the broadcast does not
◆ Using 1seg reach or while broadcasting is out of service,
regardless of whether the terminal is outside or inside
・ 1seg is a service provided by TV broadcasters the FOMA service area.
(broadcast stations), etc. Transmission charges are Also, in the following places, the signal status may
not incurred for receiving images, voice and sound. become weak or the signal may not be received even
For details on NHK viewing fees, contact NHK. if the terminal is inside the area of a terrestrial TV
broadcasting service.
・ Places that are far from the broadcast transmission
tower
・ Places where the signal is disrupted due to the
landscaper or structures such as mountain areas or
behind buildings
82 Tools/Applications
・ Places where the signal is weak or does not reach, ・ Since 1seg content is prohibited from copying,
such as tunnels, basements, or places inside screenshot (capturing watching content) is not
buildings available.
Turn the terminal around or move to other place.
Signal reception may be improved. ❖1seg watching screen
◆ Watching 1seg
a
the stand-by screen, m→[1seg]
1 On
1seg watching screen appears.
・ When you activate 1seg for the first time, create b
a channel list corresponding to the watching
area.→P86 f
When the"ご利用にあたって (Using this c
application)" screen appears, select [OK]. d g
Ending 1seg : f→[Yes] e
1Seg watching screen
・ You can also end 1seg by closing the terminal.
✔INFORMATION a 1seg watching area
b Subtitles area
・ The minimum battery power to start is 11 % (while c Channel number/Broadcasting station name
charging, you can activate or continue operating d Signal level icon
regardless of the battery level). e Multi service icon
・ It may take a time to acquire image data or Appears when the channel has other programs
broadcasted data when you activate 1seg or change (services). You can switch them with h.
channels due to characteristic of digital f Data broadcasting area
broadcasting. g Program name
・ Depending on the signal strength, video or audio ■ Basic operations on 1seg watching screen
may be interrupted or stopped. Volume control : C [Vol-up]/I [Vol-down]
Selecting the previous and next channel : h
Searching receivable frequency : h (1 sec. or more)
83 Tools/Applications
One-touch selection : 0-9, *, # ✔INFORMATION
Using the submenus : m [Submenu] ・ In the landscape view, some operations may not be
・ Details of submenus→P84 performed. Also, for multi-cursor key operations
Switching to Vertical screen/Horizontal screen :
used for selecting the previous and next channel and
a[port./land.]
searching receivable frequency, j switches to h.
Displaying full-view screen of data broadcasting site
:n ・ One-touch selection cannot be performed when
・ To return to the original view, press n again. selecting an entry field in a data broadcasting site,
・ While full-view screen is displayed, press m [To- etc.
BML-top] to display top page.
Back to previous page in data broadcasting site : ◆ Setting 1seg
c
On 1seg watching screen, m
Moving cursor in data broadcasting site : j
Selecting item in data broadcasting site : g [Select]
1 [Submenu]→[Settings]
■ Using submenus on 1seg watching screen
From the 1seg watching screen, press m
2 Set required items
Data Broadcasting settings : Configure settings
[Submenu] to perform the following operations. for details of data broadcasting.
ChannelList : Display the channel list. Auto Exit Timer : Set time until TV is
Program : Display detail information of on-air automatically turned off (OFF/15 min/30 min/60
programs and program information of currently min/90 min/120 min).
watching channel. Notes : Display information of "Notes".
Change area : Switch or add a channel list (area). Software License : Confirm software licenses.
Subtitle/Sound setting : Set subtitles or audio.→P85
TV link : Manage TV link.→P85
Settings : Set 1seg.→P84
84 Tools/Applications
❖Setting for audio/subtitle ❖Registering TV link
On 1seg watching screen, m
1 [Submenu]→[Subtitle/Sound setting]
1 Select an item that can be registered as a
TV link in the data broadcast area
・ Procedure to save TV link varies by the
2 Set each item
Display subtitle : Select [ON]/[OFF] to display
program.
85 Tools/Applications
◆ Setting the channel
LINE
❖Creating channel list
LINE is the application for free calls and mails that
・ When you activate 1seg for the first time, create a you can enjoy anytime and anywhere.
channel list corresponding to the watching area. ・ LINE is operated mainly by the pointer.
Operate from Step 3. ・ Set LINE account beforehand.
On 1seg watching screen, m ・ For details on LINE usage, refer to LINE website
1 [Submenu]→[Change area] (http://line.me/) or on LINE top page, select [More]
→[Settings]→[Help] to see Help.
2 [Submenu]→[Area
Move the cursor to an area→m
info setting] 1 On the stand-by screen, m→[Tools]→
[LINE]
3 Select an area→Select a prefecture→
Select a locality
LINE top page appears.
For the first activation, the login screen, etc.
appears. Confirm the content and follow the
Channels are scanned. When scanning is onscreen instructions.
complete, a channel list is displayed.
✔INFORMATION
4 g[Decision]
・ To retry the channel scan, m [Reset]→Select
・ Some products (coins, stamps, etc.) may be paid.
・ Some functions such as games cannot be used with
[Yes].
the terminal.
❖Switching channel list
On 1seg watching screen, m
1 [Submenu]→[Change area]
2 Select an area
86 Tools/Applications
・ After you start to use LINE, the confirmation of LINE
update is notified regularly. When update is notified, 3 Select a schedule
・ Press I [Edit] to edit a schedule.
mark "Not receive notification of update again" on
the notification screen. The confirmation is not ❖Operating submenus on calendar
notified after that, so check the update manually screen
with regularity.
- Confirming manually : On the stand-by screen, 1 On the calendar screen, m [Submenu]
m→[Tools]→Move the cursor to LINE→C
[Update]→[Confirm] 2 Select each item
Register event : Register new schedule.
・ Press n for 1 second or more to switch the Event list : Display registered schedules, holiday
pointer to Drag mode. Adjust the display range of list, etc.
profile image with Drag mode.→P70 Move to present month : Display the current
・ For using LINE and confirming update/download, month calendar.
packet communication charge is applied separately. Search : Enter search words for schedule.
Subscription to Packet Pack/packet flat-rate service SD card : Activate SD card backup to back up/
is highly recommended. restore schedules to/from microSD card.→P91
Settings : Set start day of week, notification
sound and vibration.
App info : Display version information and open
Schedule source licenses of Schedule application.
87 Tools/Applications
2 Set required items→C [Register]
Schedule is registered.
◆ Setting alarms
the stand-by screen, m→[Tools]→
・ On the stand-by screen, enter a date you want
to save a schedule (e.g. for July 31th, "0731")→
1 On
[Alarm]
Press C [Schedule] to display the schedule Alarm list screen appears.
registration screen on the entered date.
2 C [Delete]→[Yes]
Alarm
You can use alarms.
・ Up to 10 alarms can be registered for Alarm.
88 Tools/Applications
・ Operations on the notification screen are as
follows: 3 Select the subject field→Enter a subject
- [Snooze] : Back to the previous screen remaining
snooze. To cancel snooze, on the alarm list screen,
4 Select the details field→Enter details→
C [Register]
move the cursor to the alarm to be canceled
snooze→ Press C [ON/OFF]. ◆ Checking memo
- [Stop] : Back to the previous screen and snooze is
canceled.
・ Snooze continues up to 30 minutes. 1 On the memo list screen, select a memo
Memo detailed screen appears.
◆ Deleting alarm ・ Press I [Edit] to edit a memo.
❖Operating submenus on memo list
1 On the alarm list screen, select an alarm
→a [Delete]→[Yes]→[OK]
screen
On the memo list screen, m
Delete all : On the alarm list screen, a [Delete
all]→[Yes]→[OK]
1 [Submenu]
2 C [Create new]
89 Tools/Applications
◆ Deleting memos
Timer
1 On the memo list screen, select a memo
Memo detailed screen appears. Timer notifies that the set time is elapsed with the
sound, etc.
C [Delete]→[Yes]
2 1 On the stand-by screen, m→[Tools]→
[Timer]→Enter time→C [Start]
Calculator Countdown starts.
・ You can also start Timer on the stand-by screen
the stand-by screen, m→[Tools]→ by entering the hour (minute)→Press I
1 On
[Calculator]
[Timer].
90 Tools/Applications
・ When the remaining battery gets low, backup or
SD card backup restoration may not be executed. In such case,
charge the battery of the terminal and then back
Transfer or back up phonebook entries, docomo up or restore.
mails, etc. using external memory such as a microSD
card.
◆ Backing up data to microSD card
・ Data items that can be backed up to/restored from a ・ Insert a microSD card beforehend.
microSD card are as follows:
- Phonebook
- docomo mail
1 On the microSD card backup screen,
[Backup]
- Images
- Videos
- Music data
2 Select data category to be saved
- Bookmarks
- Call logs
3 C [Start]→[Backup]
- Schedule/Memo 4 [Done]
Enter docomo apps password→C
・ When a microSD card is not inserted, images,
videos, music data, ets. are saved in the phone
memory. Only data saved in the phone memory is 5 g [TOP]
backed up by Backup/restore to microSD. Data ✔INFORMATION
saved in a microSD card is not backed up.
・ "Phonebook account copy" is not available with the ・ When backing up phonebook entries to microSD
terminal. card, entries without name cannot be copied.
・ When available memory space of microSD card is
the stand-by screen, m→[Settings]
1 On
→[docomo service]→[SD card backup]
not enough, backup may not be executed. In such
case, delete unnecessary files from the microSD
For the first using, agree to "License card to save the memory space.
agreement(Translation)".
・ Do not remove the battery pack from the
terminal during backup or restoration. Data in
the terminal may be damaged.
91 Tools/Applications
◆ Restoring data to the terminal
・ Insert the microSD card that has the backup file
saved by Backup/restore to microSD beforehend.
・ When restoring phonebook entries, files created by
電話帳コピーツール (Phonebook copy tool) or
backup function for microSD card of i-mode
terminals can be restored.
7 g [TOP]
✔INFORMATION
・ If the item names (e.g. Phone number, etc.) of
another terminal phonebook are different from
those in the terminal, the item names may be
changed or deleted. Also, some text may be deleted
in copied destination, because savable characters in
a phonebook entry vary by terminal.
92 Tools/Applications
Settings Sound/Vib/LED
Make settings for volumes, ringtone, etc.
the stand-by screen, m→[Settings]
Settings menu 1 On
→[Sound/Vib/LED]
You can make various settings in the menu displayed
on the stand-by screen, m→Select [Settings]. 2 Set required items
Volumes : Setting steps→P94
Menu Shortcut Page Manner mode : Setting steps→P94
Sound/Vib/LED 81 P93 Phone ringtone : Set phone ringtone.
Display & Wallpaper 82 P95
・ When ringtone is set for contacts, ringtone for
contacts is given priority.
Battery 83 P96 Notification sound : Set notification sound.
Dat/Air mode 84 P96, P132 Incoming vib : Set whether to vibrate while
Lock & Security 85 P98 ringtone is sounding.
・ You cannot set during manner mode.
Lang/Text 86 P106 Sound at start charging : Set whether to notify by
Useful tools 87 P106 sound when starting charging.
docomo service 88 P107 Key confirmation tone : Set whether to sound
when pressing a key.
Device mgt 89 P107, P120 Screen lock sound : Set whether to sound when
opening/closing the terminal.
Dial touch tones : Set whether to sound when
operating the dial pad.
Earphone MIC input : When an earphone with a
microphone is attached, set which microphone
(of the terminal or the earphone) to use for voice
input.
93 Settings
Notification LED : Set whether to notify new SMS,
missed call, etc. by flashing of Notification LED. 2 [Manner mode]→[ON]/[OFF]
・ When Manner mode is set, status icon appears
LED settings : Set the notification LED color on the status bar. The icon varies by Manner
during a voice call, when received a missed call, mode type. For each icon, see "Icons on the
or the terminal is closed. status bar".→P35
Key illumination : Set whether to light up the key
illumination. ✔INFORMATION
・ You can also enable/disable Manner mode in the
◆ Volumes
followings.
You can adjust volume of media playing sound, - On the stand-by screen, press # for 1 second or
ringtone & notification sound, alarm sound. more
・ You cannot set while Manner mode is enabled. - While the terminal is closed, press @ for 1
the stand-by screen, m→[Settings]
1 On
→[Sound/Vib/LED]→[Volumes]
second or more
- Press and hold f until the phone options menu
appears→[Manner mode]* →[OK]
an item in j→Slide the slider in
2 Select
h to adjust the volume→[OK]
* Depending on the manner mode you set,
[Manner mode (Silent)]/[Manner mode (Alarm)]
is displayed.
◆ Manner mode ・ Regardless of Manner mode settings, auto focus
lock sound, shutter sound, count down sound for
Set/Cancel Manner mode.
self timer and screen shot sound while the camera is
・ You can change the Manner mode type.→P95
activated are emitted.
the stand-by screen, m→[Settings]
1 On
→[Sound/Vib/LED]→[Manner mode]
94 Settings
❖Changing Manner mode type Best view adjust : Set whether to adjust screen
color shade matching the visibility for your age.
the stand-by screen, m→[Settings] ・ Set your age in [Initial settings] (→P49) or
1 On
→[Sound/Vib/LED]→[Manner mode]→ [Voice&image quality setting] (→P106) under
[Useful tools].
[Select manner mode]
◆ Customizing the stand-by screen
2 Selecting an item
Manner mode : All sounds do not sound from the You can change the stand-by screen wallpaper or set
terminal speaker. the clock/calendar display and i-channel display.
Manner mode (Silent) : In addition to mute the stand-by screen, m→[Settings]
sounds, turn off the vibration. 1 On
→[Display & Wallpaper]→[Standby]
Manner mode (Alarm) : Same operation as
Manner mode except alarm volume and vibration
go along to the alarm settings. 2 [Home screen wallpaper]/[Clock/
Calendar]/[i-channel display setting]
From here on, follow the onscreen instructions.
Display & Wallpaper
◆ Setting wallpaper on the lock
Set screen brightness or wall paper. screen
the stand-by screen, m→[Settings]
1 On
→[Display & Wallpaper]
Set wallpaper for lock screen.
the stand-by screen, m→[Settings]
1 On
→[Display & Wallpaper]→[Lock screen
2 Set required items
Standby : Setting steps→P95 wallpaper]
Lock screen wallpaper : Setting steps→P95
Color theme : Set the color theme for the stand-by
screen, etc.
2 [No setting (Home wallpaper)]/
[Wallpaper]/[Gallery]
Brightness : Setting steps→P96 From here on, follow the onscreen instructions.
Screen timeout : Setting steps→P96
95 Settings
◆ Brightness Battery usded time : Display the battery used
time. Select to check the details of battery
Set brightness of screen backlight. consumption, etc.
the stand-by screen, m→[Settings] Running application : Display the running
1 On
→[Display & Wallpaper]→[Brightness]
application. Select each application to check the
details of the condition of use.
2 Mark [Mobiledata]
Mobile data communication volume (estimate)
Battery per period or per application is displayed.
・ To restrict volume of data usage, mark [Set
Check the remaining amount of battery, etc. limit].
the stand-by screen, m→[Settings] ・ m[Submenu]→To restrict the data
1 On
→[Battery] communication of applications running in the
background, mark [Restrict background data].
・ m[Submenu]→Marking [Auto-sync data]
2 Select each item
Remaining battery (%) : Display the remaining
synchronizes the terminal with online service
information.
battery and charging condition.
96 Settings
◆ Stopping packet connection ❖Adding an access point
Some applications automatically perform packet ・ Do not change the MCC/MNC to other than 440/10.
communications. Packet communication is kept The setting disappears from the screen.
active unless you cut off the connection or the time- the stand-by screen, m→[Settings]
out occurs. Activate or deactivate packet 1 On
→[Dat/Air mode]→[Mobile networks]→
communication as required.
[Access Point Names]
the stand-by screen, m→[Settings]
1 On
→[Dat/Air mode]→[Mobile networks] 2 m[Submenu]→[New APN]
2 [Data enabled]→[OFF] 3 [Name]→Enter a network profile→[OK]
◆ Setting access point (APN) 4 [APN]→Enter
[OK]
the access point name→
97 Settings
❖Initializing an access point
By initializing an access point, the default state is
Lock & Security
restored.
Set up about lock.
the stand-by screen, m→[Settings]
1 On
→[Dat/Air mode]→[Mobile networks]→ 1
On the stand-by screen, m→[Settings]
→[Lock & Security]
[Access Point Names]
99 Settings
❖Network security code ・ If you enter a wrong PIN code 3 times
consecutively, the PIN code is locked and cannot be
The network security code is a 4-digit number used anymore. In this case, unlock with "PUK".
necessary for identification or using the docomo Unlock the PIN code before setting new PIN code.
Network Services at reception of your request in ・ When docomo nanoUIM card is locked by PIN or
docomo Shop or at a docomo Shop, docomo PUK, remove the docomo nanoUIM card. The
Information Center or "お客様サポート (Customer stand-by screen will appear.
support)". It can be set any number at the
subscription and also changed later by yourself. ❖PUK code
・ For details of network security code, refer to NTT
DOCOMO website. The PUK code is an 8-digit number for canceling the
locked PIN code. The PUK code cannot be changed by
❖PIN code yourself.
・ If you enter a wrong PUK code 10 times
You can set up a security code called a PIN code for consecutively, the docomo nano UIM card is
your docomo nano UIM card. At the time of locked. Please contact a docomo Shop.
subscription, the code is set to "0000", which you can ・ When docomo nanoUIM card is locked by PIN or
change by yourself.→P105 PUK, remove the docomo nanoUIM card. The
PIN is a 4- to 8-digit number (code) that must be stand-by screen will appear.
entered each time you insert the docomo nano UIM
card into the terminal or when the terminal is ❖microSD password
powered ON for user confirmation to prevent
unauthorized use of the docomo nano UIM card by a You can set a password to a microSD card. If you use
third party. Entering the PIN code enables making/ the microSD card with password set by inserting to
receiving calls and terminal operation. another phone, password authentication on the
・ For using the docomo nano UIM card that you have phone is required. If you insert it to a PC or phone
used on another terminal by inserting to this without password setting function, use of data or
terminal, use the set PIN code on the former formatting cannot be made.
terminal. If you did not change the setting, the code ・ Some microSD cards may not support this function.
is "0000".
100 Settings
◆ Auto-key lock setting 4 screen
[Time to lock]→Select a time to start the
lock
Auto-key lock of the terminal has two functions of
Close on lock function and Unoperated lock function. ✔INFORMATION
・ To make an emergency call (110, 119, or 118) when
the lock is set, open the terminal, on the security ・ You can change the security code/password to
code/passwords entering screen, m[EMG call]→ unlock the screen lock.→P102
Enter the emergency call number and pressn. ・ Turning the power OFF and ON when Lock on close
is set to "ON" makes Lock on close activated and the
❖Lock on close security code/password entering screen will be
Every time the terminal is closed, key operations is displayed with the terminal opened.
locked. Authentication operation is required every ・ When Unoperated lock is already activated, Lock on
time you open the terminal to prevent others from close will not be activated by setting it.
misusing the terminal.
・ While the terminal is in Lock on close, some ❖Unoperated lock
functions such as turning on/off the terminal,
receiving a voice call, receiving mails, or alarm Lock key operation automatically when no operation
sound suspension, etc. are available. is performed for a certain period of time.
Authentication operation is required every time the
the stand-by screen, m→[Settings]
1 On
→[Lock & Security]→[Locks]→[Lock on
screen is unlocked to prevent others from misusing
the terminal.
close] ・ The screen will not be locked while watching 1seg,
playing videos, during infrared communication,
when a call is received/made/held/during a call, or
2 Enter
g[OK]
security code or password→
when a software update function is activated.
・ Depending on the functions that start by the time
・ To set for the first time, enter the security code for the lock that will start by the time when the will
(default). not
3 [Lock on close]→[ON]
101 Settings
・ While the terminal is in Unoperated lock, some ◆ Security code/password setting
functions such as turning on/off the terminal,
receiving a voice call, receiving mails, or alarm Set the security code/password to cancel the screen
sound suspension, etc. are available. lock.
the stand-by screen, m→[Settings] 1 On the stand-by screen, m→[Settings]
1 On
→[Lock & Security]→[Locks]→ →[Lock & Security]→[Phone security
[Unoperated lock] methods]
2 Enter
g[OK]
security code or password→ 2 Enter
g[OK]
security code or password→
・ To set for the first time, enter the security code ・ To set for the first time, enter the security code
(default). (default).
4 screen lock
[Time to lock]→Select a time to start the code ( 4- to 8-digit number).
Password (Alphanumeric) : Set to unlock by a
password (which consists of 4 to 16
✔INFORMATION alphanumerics/symbols).
・ You can change the security code/password to
unlock the screen lock.→P102 4 C[Register]→[OK]
・ Turning the power OFF and ON when Unoperated ❖Locking screen lock
lock is set to "ON" makes Unoperated lock activated
and the security code/password entering screen will With the auto-key lock (→P101) and security code/
password (→P102) set, the screen is locked when the
be displayed.
terminal is closed or the time set in [Unoperated lock]
・ When Lock on close is already activated, has passed with no operation.
Unoperated lock will not be activated by setting it. ・ To cancel the screen lock, press any key to cancel
the sleep mode and perform operations for the set
unlock preference type.
102 Settings
✔INFORMATION ✔INFORMATION
・ If you fail unlocking screen lock 5 times, retry 30 ・ To delete installed certificates, delete from [Clear
seconds later. credentials].→P103
・ Even when the screen lock is not unlocked, you can
make an emergency call from the unlocking screen. ❖Installing authentication
→P101 information or certificate
You can install authentication information or
◆ Authentication information certificates.
management the stand-by screen, m→[Settings]
You can display credential authentication information
1 On
→[Lock & Security]→[Security]→[Install
or certificates or install authentication information for certificates]
accessing VPNs etc. or other certificates.
104 Settings
◆ Permitting to install unknown ✔INFORMATION
sources applications ・ When entering the PIN code for the first time, enter
"0000".
Allow the installation for the application obtained
from a mail, etc. ・ To cancel the setting, unmark [Lock SIM card] in
・ To protect the terminal and personal data, Step 2.
download applications only from trusted sources.
❖Changing PIN code
the stand-by screen, m→[Settings]
1 On
→[Lock & Security]→[Security]
Set the PIN code (mark [Lock SIM card]) in advance.
the stand-by screen, m→[Settings]
1 On
2 precautions
Mark [Unknown sources]→Confirm
and [OK]
→[Lock & Security]→[Security]→[Set up
SIM/RUIM card lock]
◆ Setting PIN code
2 [Change SIM PIN]
❖Setting SIM/RUIM card lock 3 Enter the current PIN code→[OK]
Set PIN code to be entered when the terminal is
turned ON.
4 Enter a new PIN code→[OK]
the stand-by screen, m→[Settings] 5 Enter the new PIN code again→[OK]
1 On
→[Lock & Security]→[Security]→[Set up ❖Entering PIN code
SIM/RUIM card lock]
1 Turn power ON→Enter PIN code on the
PIN code entry screen→g[OK]
2 [Lock SIM card]→Enter the PIN code→
[OK] ❖Unlocking PIN lock
If PIN code is locked, unlock PIN and set new PIN
code.
105 Settings
✔INFORMATION
1 Enter PUK code in the PIN code entry
screen→g[OK] ・ Changing languages may take time.
・ Some applications are not displayed in English.
2 Enter a new PIN code→g[OK] ・ To change to the Japanese display, operate as
3 Enter a new PIN code again →g[OK] follows.
On the stand-by screen, m→[Settings]→[Lang/
Text]→[言語 (Language)]→[日本語 (Japanese)]
Lang/Text
Change the language used for the terminal or Useful tools
character size.
Set the Bluetooth communication, My feature
the stand-by screen, m→[Settings]
1 On
→[Lang/Text]
button, etc.
the stand-by screen, m→[Settings]
1 On
2 Set required items
言語 (Language) : Setting steps→P106
→[Useful tools]
2 [English]
106 Settings
◆ My feature button Send device error information : Set for sending
error information to the server managed by
Set the function when iop and @ docomo.
(Side key) are pressed. Remote Initialization : Make settings for the
the stand-by screen, m→[Settings] service initializing data in the terminal by remote
1 On
→[Useful tools]→[My feature button]
control.
USB debug Switch : Configure settings to use a
dedicated terminal at a sales outlet such as a
2 press]→Select
Select a button→[Short press]/[Long
a function
docomo Shop.
✔INFORMATION
・ Some applications displayed in the docomo service
docomo service can be disabled. When you disable an application, it
may not be available.
Set docomo service.
the stand-by screen, m→[Settings]
1 On
→[docomo service]
Device mgt
107 Settings
2 Set required items SD card password settings : Setting steps→P104
Automatic date & time : Set whether to adjust
date and time automatically by using network-
❖Erasing data in microSD card
(Format)
provided information.
Automatic time zone : Set whether to adjust time ・ Note that this operation erases all data in the
zone automatically by using network-provided microSD card.
information.
the stand-by screen, m→[Settings]
Set date : Set date manually. 1 On
→[Device mgt]→[SD card and storage
Set time : Set time manually.
Select time zone : Set time zone manually. area]→[Unmount SD card]
Use 24-hour format : Set whether to use 24-hour ・ When precautions about unmount microSD
format. card appear, confirm the content and select
Choose date format : Select date format. [OK].
◆ SD card and storage area
2 [Erase SD card]→[Erase SD card]
・ When a confirmation screen for certification
the stand-by screen, m→[Settings]
1 On
→[Device mgt]→[SD card and storage
code appears, follow the onscreen instructions
to enter.
area]
3 [Erase everything]
2 Total space (BUILT-IN STORAGE) : Check total
Set required items
◆ Reset of the terminal
amount of memory of the terminal, amount per Reset the terminal to the default state.
data and available amount. ・ To erase SD card data, see "Erasing data in microSD
Total space (SD CARD) : Check total amount and card (Format)".→P108
available amount in the microSD card.
the stand-by screen, m→[Settings]
Mount SD card/Unmount SD card : Recognize
microSD or cancel connection of microSD card to
1 On
→[Device mgt]→[Factory data reset]→
remove it safely. [Reset phone]
Erase SD card : Setting steps→P108
108 Settings
2 Enter security code or password→ ❖Widget
g[OK] You can locate widgets on the lock screen.
・ To set for the first time, enter the security code the stand-by screen, m→[Settings]
(default). 1 On
→[Device mgt]→[Advanced settings]→
3 [Erase everything]
A short while after the reset is completed, the
[Lock screen/Show widget]
terminal will be restarted.
・ Do not turn off the terminal while resetting 2 m[Change]→Select a widget→
g[Select]→g[Paste]→[OK]
phone.
❖Daydream
◆ Advanced settings
Set screen saver which is displayed when the
Make settings for applications, screen saver, VPN, etc. terminal goes into the sleep mode while charging.
the stand-by screen, m→[Settings] the stand-by screen, m→[Settings]
1 On
→[Device mgt]→[Advanced settings]
1 On
→[Device mgt]→[Advanced settings]→
[Daydream]→a[ON]
2 Set required items
Lock screen/Show widget : Setting steps→P109
Daydream : Setting steps→P109 2 Select the screen saver→g[Select]
・ m[Submenu]→Select [Start now] to activate
VPN : Setting steps→P110 Daydream.
Apps : Setting steps→P110 ・ aPress [OFF]/[ON] to switch the screen
Location : Setting steps→P111 saver function to ON/OFF.
109 Settings
❖Connecting VPN (Virtual Private 3 information→[Connect]
Enter necessary authentication
Network)
VPN (Virtual Private Network) is a technology to ・ When you are connected to the VPN, appears
connect to the information in a protected local on the status bar.
network such as enterprises or universities from
■ Disconnecting VPN
another network. To set up a VPN connection from
the terminal, you need to retrieve the information
related to security from your network administrator.
1 Open the application list→
a[Ongoing]
・ Authentication may be required. Set security code
or password for the security unlock preference in
advance.→P102 2 Select a notification of VPN connecting→
[Disconnect]
■ Adding VPN
❖Apps
the stand-by screen, m→[Settings]
1 On
→[Device mgt]→[Advanced settings]→ Manage or delete installed applications.
110 Settings
2 Select an application→[Clear data]/[Clear ❖Location
cache] Set the measurement for location information.
・ When [Clear data] is selected, select [OK].
■ Location setting
■ Disabling applications Allow applications to use location data.
・ The disabled application does not appear on the the stand-by screen, m→[Settings]
application list, stand-by screen, etc. and will not be 1 On
→[Device mgt]→[Advanced settings]→
activated. However it is not uninstalled.
the stand-by screen, m→[Settings] [Location]
1 On
→[Device mgt]→[Advanced settings]→
[Apps]
2 Set [Location] to ON
3 Select a mode from [High accuracy]/
2 Select an application→[Disable]/[Enable]
・ When [Disable] is selected, select [OK].
[Battery saving]/[External GPS]
✔INFORMATION
✔INFORMATION ・ When [High accuracy] or [External GPS] mode is
・ When you disable an application, some other used, an external GPS device compatible with
applications linked to the disabled application may Bluetooth (commercially available) is required.
not be operated correctly. In such case, enable the ・ Note that this function increases power
application again to operate them correctly. consumption.
111 Settings
■ Connecting to a GPS device compatible with ◆ Accessibility
Bluetooth (commercially available)
Make the settings for supporting user operations.
Set the connection to a GPS device compatible with
the stand-by screen, m→[Settings]
Bluetooth (commercially available).
・ For details on Bluetooth function of the terminal, 1 On
→[Device mgt]→[Accessibility]
refer to "Bluetooth® Communication".→P124
・ For details on the operations of the GPS device
compatible with Bluetooth (commercially 2 Set required items
Text-to-speech output : Set up text-to-speech
available), refer to the operation manual of your output.
GPS device. ・ Text-to-speech plug-in in Japanese is not
the stand-by screen, m→[Settings]
1 On
→[Device mgt]→[Advanced settings]→
supported by default.
◆ About phone
[Location]
Display various information of the terminal.
2 [Not set.]→Select the GPS device
compatible with Bluetooth (commercially 1
On the stand-by screen, m→[Settings]
→[Device mgt]→[About phone]
available)
・ When you set Bluetooth function to ON/OFF or
set the paring with a GPS device (commercially
2 Check items
Software Update : Setting steps→P149
available), select [Bluetooth setting...]. Status : Check battery status, phone number,
network name and address, IMEI (individual serial
number), etc.
Legal information : Check Open source license.
Model number/Android version/Baseband
version/Kernel version/Build number : Check
each version or number.
112 Settings
Data management microSD card (External
storage)
2 Select an image
An image play screen appears. 2 Select a video
A video play screen appears.
Switching between the previous and next screen
:h
Zoom in : g[Zoom in]
・ Press c while zooming in to return to the
original view.
Scroll (when the image is larger than the display
area) : k
Full screen display : a[Full]
Turning an image : C[Rotate]
a Album artwork
A list screen appears. b Song title/Album title/Artist title
・ is displayed on the right side of the song title c Play time
while playing. d Playback point
・ Press h to play previous/next file. Press l to
3 Select music
A music play screen appears.
turn back to the top of the file depending on the
operation status.
・ When you select [Artists]/[Albums]/[Playlists], ・ Press h for 1 second or more to fast-rewind/
select artist name/album/playlist name until fast-forward.
music you want to play is displayed. e Shuffle status
/ : Shuffle off/Shuffle on
・ To make the shuffle setting, on the music play
screen, select m[Submenu]→[Shuffle setting]
→[Shuffle off]/[Shuffle].
[OK] →[Disconnect]→[OK]
3 Open the application list to check if transmission
Select a Bluetooth device
is completed.
<Example> Receiving files from a Bluetooth
device
2 devices]→Select
Turn [Bluetooth] ON→[Search for
a device to be unpaired
→[Unpair]
◆ Bluetooth settings
2 m[Submenu]→[Settings]
3 Set each item
Receive setting : Set whether to receive Area
Mail.
Beep tone : Set sounding time of beep tone and
action when Area Mail arrives in Manner mode.
Check screen image and beep tone : Check actual
reception screen and beep tone for Area Mail
such as Earthquake Early Warning, Tsunami
Warning, Disaster/Evacuation information.
■ Mail ■ Camera
138 Appendix/Index
■ Phone ■ Tools
Menu Shortcut Page Menu Shortcut Page
Phonebook 71 P61 Calculator 91 P90
Phone Phone memo 721 P59 Alarm 92 P88
memo Recorded 722 P59 Schedule 93 P87
msg. Memo 94 P89
Recorded 723 P59 Timer 95 P90
messages
settings QR Code Reader 96 P80
Redial 73 P58 Infrared 97 P123
Received calls 74 P58 Instruction Manual 98 H2
Dial/ Network 751 P59 LINE 99 P86
Receive service ■ 1seg
call setting Overseas 752 P60
setting Menu Shortcut Page
139 Appendix/Index
• Are the adapter and the terminal set correctly?
Troubleshooting (FAQ) • In case of using an AC Adapter (optional), is the
microUSB plug of AC adapter connected to the
terminal correctly?→P44
◆ Troubleshooting • In case of using the desktop holder (included), is
・ Check for the necessity of software update first, and the microUSB plug of AC adapter connected to
update the software if necessary.→P149 the desktop holder correctly?→P43
・ When checking the following items does not • In case of using the desktop holder (included), is
improve symptoms, contact "Repairs" on the last the charging jack of the terminal dirt? If it is
page of this manual (in Japanese only) or dirty, wipe the jack with a dry cotton swab etc.
DOCOMO-specified repair office. • Is a PC turned on when you use the PC
connection USB cable T01 (optional) or Micro
■ Power supply and charging USB Cable 01 (optional)?
●The terminal cannot be turned ON. • If you call, perform communication or operate
• Is the battery pack installed correctly?→P40 functions for a long time while charging the
• Is the battery exhausted? battery, temperature of the terminal may be
●The screen freezes/The terminal cannot be raised and the indicator LED (red) may turn off.
turned off. In high temperature status, the terminal stops
If the screen does not respond or the power charging for safety. Wait a while until the
cannot be turned off, remove the battery pack, temperature is lowered and retry to charge.
wait for a few seconds, attach the battery pack ■ Operations/Display
again, and then turn the power ON.→P41
●No operations are performed by pressing keys.
* Note that data and settings may be erased since that is an
Is the terminal turned off?→P45
operation for shutting down the power forcibly.
●Cannot charge the battery (the indicator LED
does not turn on or blinks).
• Is the battery pack installed correctly?→P40
• Is the adapter's power plug or cigarette lighter
plug inserted to the outlet or cigarette lighter
socket correctly?
140 Appendix/Index
●The operation time provided by the battery is ●The screen reacts slowly when a key is pressed
short. When large amount of data is saved in the
• Running multiple applications increases battery terminal or transferring large-size data between
consumption and usage time may become the terminal and microSD card, the reactions on
short. Exit from applications which you are not the screen may be delayed.
using as follows. ●The terminal, etc. become hot while operating/
- Exiting running application→P52 charging.
- Exiting applications with c While operating or charging, or if you call or
• Is the terminal left for a long time under the watch 1seg, etc. for a long time while charging
state of out of service area? Out of service area, the battery, the terminal, battery pack and adapter
a lot of power is consumed to search available may become hot. There is no problem and you
radio waves. can continue to use them.
• The operation time provided by the battery pack ●The terminal becomes hot while operating/
varies by the operating environment and charging.
battery pack's deterioration. If high temperature of the terminal continues,
• The battery pack is a consumable part. Each charging or some functions may be disabled.
time it is charged, time available with each ●The terminal becomes hot and the power turns
charging reduces. Even the full charge state, OFF.
when the operation time is too short, purchase If you activate several applications, use camera,
a new battery pack of the specified type. connect to the Internet for a long time while
●Turning the power off or restarting charging the battery, etc., temperature of the
automatically happens. terminal may be raised. When the terminal is in
If the jack of battery pack is dirty, the contact may high temperature state for a long time, charging
become poor and the power may shut OFF. If it is or functions may stop. And the power of the
dirty, clean with a dry cotton swab. terminal may shut down to prevent you from
●The docomo nano UIM card is not recognized. burns.
Is the docomo nano UIM card installed in the right
direction?→P39
141 Appendix/Index
●The display is dim. When safe mode is booted, [Safe mode] is
• Have you changed any of the following displayed at the lower left of the screen. To exit
settings? the safe mode, turn power OFF and then ON.
- Brightness→P96 * Back up the necessary data before using safe mode.
- Screen timeout→P96 * Some widgets that you created may be removed.
●The display has afterimages. * Safe mode is not a normal booting state. To use
If the same screen is displayed for a while, ordinarily, exit the safe mode.
afterimages of that screen may remain even after ●Applications cannot be operated properly
the screen is changed for a certain operation. (applications cannot be activated/errors occur
●The clock is not on time. frequently).
The clock time may be wrong when the terminal Are there any applications being disabled? Enable
stays powered on for a long time. Make sure that disabled applications, then retry to operate.→
[Automatic date & time]/[Automatic time zone] of P111
Date & time are marked, and then turn OFF and ■ Phone/Voice call
ON the terminal in a place with good signal
●Cannot dial by pressing keys
conditions.→P107
Do you set Airplane mode?→P98
●Terminal operation is unstable.
●During a voice call, the distant party's voice is
• Instability may be caused by application that
hard to listen to or too loud.
you installed after purchasing the terminal. If
Adjust the listening volume. Turn on Clear voice
the symptom is improved when you boot the
and Slow voice to make the other party's voice
terminal in safe mode (function for booting in
easy to understand.→P57
near default state), uninstalling the installed
application may improve the symptom. ●Calls are not connected (Even when moving,
Boot the terminal in safe mode by the following does not disappear or although radio waves are
procedure. enough, making/receiving calls is unavailable).
- With the power turned off, press and hold f • Turn the power OFF and ON, or reattach the
for 2 seconds or more. Immediately after the battery pack or docomo nano UIM card.→P39,
docomo logo appears, keep pressing m or P40, P45
g
142 Appendix/Index
• Due to the nature of radio waves, making/ • Do you set Airplane mode?→P98
receiving calls may be unavailable even when
"not out of service area" or " appears on the
■ Mail
display for the radio wave condition". Move to ●Mail is not received automatically.
call again. Is [Confirm every time] or [OFF] set for the auto
• Do you set call restriction such as Call Blocking? reception setting in the communication setting of
→P60 the mail settings.→P66
• Due to the crossing of radio waves, at the ■ 1seg/Camera
crowded public places, calls/mails are crossed ●Cannot watch 1seg.
and the connection status may not be good. • Are you out of digital terrestrial broadcasting
Move to other place or call again at other time. service area or in an area with poor signal
●The ringtone does not sound. strength?
• Is [Ringtone & notifications] in Volumes set to Turn the terminal around or move to other
0?→P94 place. Signal reception may be improved.→P82
• Have you activated any of the following • Do you use the channel list matching with your
functions? watching area?→P86
- Public mode (Driving mode)→P32 ●Photos and videos taken with the camera are
- Public mode (Power OFF)→P60 blurred.
- Manner mode→P94 • Check if clouds or dirt attach to the lens of
- Airplane mode→P98 camera.
• Do you set call restriction such as Call Blocking? • Automatic still image shooting is available in
→P60 the camera of the terminal, but you can also
• The followings are set to 0 seconds? focus using the manual focus function.→P31
- [Set answer time] in Phone memo→P59
- [Ring time settings] in Voice mail service→P59 ■ Overseas use
- [Ring time] in Call forwarding service→P59 ●Cannot use the terminal even when is
●Calls cannot be made. displayed overseas.
• Is the docomo nano UIM card installed in the Do you subscribe to WORLD WING? Check if you
right direction?→P39 subscribe to WORLD WING.
• Do you enter a phone number from City code?
143 Appendix/Index
● is displayed, and you cannot use the terminal ●No caller ID is notified/A notified caller ID is
overseas. different from that of the caller/Functions for
• Are you out of the international roaming service using contents saved in the phonebook or those
area or in an area with poor signal strength? using Caller ID notification do not operate.
Check if the service area and network operator Even when a caller notifies its caller ID, it is not
are available, referring to NTT DOCOMO displayed on the terminal unless notified from the
website. network or network operator used. And, a notified
• Set the network operator to [Select caller ID may be different from that of the caller
automatically].→P133 by some networks or network operators you use.
• It may be recovered by turning the terminal OFF ●Cannot perform data communication overseas.
and ON.→P45 Check the data roaming settings.→P132
●Cannot use the terminal suddenly while using
overseas.
■ Data management
Does usage amount exceed the limit of maximum ●Data saved in microSD card is not displayed.
charges for use? For use of International roaming Reattach the microSD card.→P114
(WORLD WING), the limit of maximum charges ●Data transfer is not performed.
for use is set in advance. When it exceeds the Do you use USB HUB? If you use USB HUB,
limit of maximum charges for use, pay the operations may not be performed correctly.
charges. ● / appears when displaying images.
●There is no incoming call overseas. It may appear if image data is broken.
Is Restricting incoming calls set to [Activate
restriction]?→P135
144 Appendix/Index
■ Bluetooth ●Please wait for a while (Voice service)/Please
●The terminal cannot be connected to a Bluetooth wait for a while (Data service)
device/A Bluetooth communication device Phone line or packet communication facilities are
cannot be found from the terminal. broken down or line or packet communication
Make Bluetooth device (commercially available) network is very busy. Wait a while and then
detectable and then register the device on the operate again.
terminal. If you delete already registered device ●The PIN unlocking code has been locked
and register the device again as a new device, This message appears when PUK code is entered
delete the registrations on both the terminal and with docomo nano UIM card being PUK locked.
Bluetooth device (commercially available), and Contact a sales outlet such as docomo Shop.→
then perform registration of the devices. P100
●Calls cannot be made from the terminal ●No SIM card.
connected to an external device such as car Check if the docomo nano UIM card is installed to
navigation or handsfree device. the terminal correctly.→P39
If calls are made several times when the other ●SIM card is locked.
party does not answer or is out of service, the call Displayed when you turn on the terminal with PIN
to this number may be disabled. In this case, turn code enabled. Enter the correct PIN code.→P105
the terminal OFF and ON. ●SIM card error
SIM card removed. Phone will restart.
◆ Error messages It may appear when IC of docomo nano UIM card
●Memory space is full cannot be loaded because of dirt, but it is not
The terminal is low on memory. If you keep malfunction. Clean the IC of docomo nano UIM
using, some functions and applications may not card regularly.
be operated.
Delete unnecessary data and then use it again.
Displayed when available memory of the terminal
is low. Delete unnecessary data from the album
or data to increase memory space.
145 Appendix/Index
❖After Sales Services
Warranty and After-Sales
Service ■ When problems occur
Before requesting repair, read the section on
"Troubleshooting" in this manual (→P140). If the
❖Warranty problem still persists, contact "Repairs" on the last
・ The terminal is provided with a written warranty. page of this manual (in Japanese only).
Make sure that you receive it. Check the written ■ If the result of inquiries indicates that a repair
contents and items such as "販売店名・お買い上げ is required
日 (Shop name/date of purchase)" and keep it in a Take the terminal to DOCOMO-specified repair office.
safe place. If it does not contain the necessary
Be sure to check the opening hours of the office
information, immediately contact the shop where
before you go. The warranty must be presented to
you bought it. The warranty is valid for a period of
receive warranty service. Note that, repair may take
one year from the date of purchase.
longer time depending on the state of damage.
* Back cover F86, battery pack F32, desktop holder F49
are not covered by the charge-free repair. ■ In the warranty period
・ The specifications and appearance of the terminal ・ The terminal is repaired at no charge subject to the
and all accessories are subject to change for the conditions of the warranty.
sake of improvement without prior notice. ・ The warranty must be presented to receive
・ Since troubles, repair or other handling of the warranty service. Repair requests that are not
terminal may cause contents in the phonebook etc. accompanied by the warranty or that involve
to be altered or deleted. DOCOMO recommends malfunction and damage due to incorrect handling
making a copy of the Phonebook data etc., in case. by the owner (damage of external connection jack,
* Data such as phonebook entries in the terminal can be saved liquid crystal/display etc.) or in case you have sent
in a microSD card. it to a repair shop other than a DOCOMO-specified
* Data such as phonebook entries can be backed using repair office will only be repaired at the owners
docomo cloud. expense, even if the warranty period is still
effective.
146 Appendix/Index
・ The subscriber is charged even during the warranty ■ Notes
period for the repair of failures caused by the use of ・ Do not modify the terminal or its accessories.
devices or consumable items that are not - May cause fire, injuries or malfunction.
DOCOMO-specified. - The modified terminal may be repaired only if the
■ Repairs may not be possible in the following owner agrees on that all the modified parts are
cases. restored to the original conditions. However,
repairs may be refused depending on the
・ When corrosion due to moisture, condensation, modifications.
perspiration, etc. is detected, or if any of the internal ・ The following cases may be regarded as
boards are damaged or deformed (repairs may not modifications.
be possible if external connection jack, liquid - A sticker etc. is put on the liquid crystal/display or
crystal/display is damaged, or the terminal outer key part
case is lifted). - The terminal is embellished with adhesive
・ When you have sent the terminal to a repair shop material etc.
other than a DOCOMO-specified repair office - Exteriors are replaced with other than DOCOMO's
* Even in case that a repair is possible, since those conditions genuine parts
are outside the range of the warranty, a repair is charged. ・ Repair of failures or damage caused by
■ After expiration of the warranty modification is charged even during the warranty
All repairs that are requested are charged. period.
・ Do not remove any inscription stickers attached to
■ Replacement parts the terminal.
Replacement parts (parts required to maintain the The inscription sticker plays a role of certification
product functions) are basically kept in stock for at for specific technical standards. If confirmation of
least 4 years after termination of production. the inscription sticker's content is impossible
However, repair may not be possible due to lack of because it is intentionally removed or changed,
repair parts, etc. Note that repair may still be possible determination of whether specific technical
depending on the defective portion even if the stock standards are satisfied cannot be made. Therefore,
period has expired. Contact "Repairs" on the last page repair may be refused.
of this manual. (In Japanese only)
147 Appendix/Index
・ Function settings and information may be cleared
(reset) by malfunctions, repair or other handling of Precautions on memory dial (phonebook
the terminal. Should that happen, set up the function) and downloaded data
functions again. Note that data you created or data you retrieved
・ If repair is executed, Bluetooth address may be or downloaded from sources other than your
changed regardless of malfunction part. terminal may be changed or lost when you
・ Magnetic components are used in the earpiece, change the model or have repairs done to the
speaker, lower right of the display of the terminal. terminal. DOCOMO shall have no liability for any
Do not allow cash cards or other devices that are change or loss of any kind. Under some
vulnerable to magnetism to come into contact with circumstances, DOCOMO may replace your
the phone. terminal with its equivalent instead of repairing it.
・ This terminal is waterproof. However, if inside of In that case, we cannot transfer these data to
the terminal gets wet or moist, turn the power off replaced products except for some data.
immediately, remove the battery pack, and bring
the terminal to a repair office as soon as possible.
Note that repair may not be possible depending on
the condition of the terminal.
148 Appendix/Index
◆ Using software update
Software update
・ Do not remove the battery pack while updating
software. The update may fail.
This function allows you to connect the network and ・ Software update should be done with battery fully
check if software in the F-05G needs to be updated, if charged. It is recommended to perform while
software update is necessary, it downloads software
charging.
to update. ・ Software cannot be updated in the following cases.
Check the NTT DOCOMO website to see if software - During a call
updates are necessary.
- When 圏外 (out of service area) is displayed
・ Software may be updated in following 3 methods : - During international roaming
Automatic Update : Automatically download file to - In Airplane mode
update at the specified time. - When date and time are not set correctly
Now update : Update software immediately. - When the remaining battery is not sufficient for
Reserved update : Automatically update software at software update
the time set in advance. - When the terminal is low on available memory for
✔INFORMATION software update
- When the basic software is altered
・ Software update can be done even when various ・ Software update (downloading or rewriting) may
data, such as phonebook entries registered in take time.
terminal, camera images, mail, downloaded data, ・ Making/receiving calls, communications functions
are remaining; note that data protection sometimes and other functions are disabled during software
cannot be secured according to the conditions of update. Only incoming calls can be answered while
your terminal (such as malfunction, damage, or downloading.
water leak). DOCOMO recommends backing up ・ Stay in a place with strong radio wave condition
necessary data. However some data such as when updating software. Software update may be
downloaded data may not be backed up. canceled if the radio wave condition is not good
enough.
・ If software update is not needed, [No update is
needed.] appears.
149 Appendix/Index
・ During international roaming or when the terminal ◆ Updating software automatically
is out of service area, [When docomo network is not
available, or during roaming software update is not Update file is automatically downloaded and
available.] or [When docomo network is not software is updated at the specified time.
available, or during roaming, install cannot be
started.] appears. ❖Automatic update setting
・ SMS sent during software update is stored in the ・ The settings of Software Update is set to
SMS center. [Automatic Update] by default.
・ When updating software, your private information
the stand-by screen, m→[Settings]
concerning F-05G (model, serial number, etc.) is
automatically sent to the server for software update
1 On
→[Device mgt]→[About phone]→
managed by DOCOMO. DOCOMO does not use the [Software Update]
sent information for purposes except software
update.
・ When software update has failed, the terminal may 2 [Configure the software update]
not activate or [Update failed] appears and all
operations may become unavailable. In that case,
3 [Automatic Update]/[Manual Update]
please bring the terminal to DOCOMO-specified ❖When software update is necessary
repair office. If the update file is downloaded automatically,
・ When PIN code is set, the PIN code entry screen (software update available) appears on the status bar.
appears during resetting after rewriting and you ・ When the rewrite start time reaches with
need to enter PIN code. (software update available) displayed, software is
・ While updating software, do not activate other automatically rewritten and (software update
applications. available) disappears.
1 notification
Open the application list→Select a
150 Appendix/Index
◆ Updating software immediately
Software update starts immediately.
・ There are 2 ways to activate software update:
activating from the setting menu and activating
from Software update notice screen.
<Example> Activating software update from the
Rewrite notice screen setting menu
the stand-by screen, m→[Settings]
2 Perform target operations
Closing confirmation : [OK]
1 On
→[Device mgt]→[About phone]→
Return to the stand-by screen. Updating starts [Software Update]→[Start the software
when the preset time is reached.
Changing preset time : [Set Time]
update]→[Yes]
For reserved update →P152 "Reserving software ・ If software update is not needed, [No update is
update" needed.] is displayed.
Rewriting immediately : [Start update]
For updating immediately →P151 "Updating
software immediately"
✔INFORMATION Activating from Software update notice screen :
・ If the software is not updated when the update Display Software update notice screen→[Start
the software update]
notification is received, (software update
available) appears on the status bar.
・ If software update at the preset time could not be
2 approximately
Rewriting starts automatically
10 seconds after [Ready
performed, the software update will be performed at for update. Please refrain from starting
the same time the following day.
other application.] is displayed
・ Software cannot be updated automatically when the
Auto-update setting is set to [Manual Update] or ・ Rewriting starts when you select [OK].
while updating software by Now update.
151 Appendix/Index
・ While updating the software, all key operations ❖When the reserved time is reached
become disabled and updating cannot be
canceled. When the preset time is reached, rewriting starts
・ When the software update is complete, the automatically approximately 10 seconds after [Ready
terminal restarts automatically and the stand- for update. Please refrain from starting other
by screen is displayed. application.] is displayed.
✔INFORMATION
・ While updating the software, all key operations
become disabled and updating cannot be canceled.
・ If software update could not be started at the preset
time, the software update will be performed at the
same time the following day.
・ When an alarm, etc. is set at the same time as the
❖Post-update display reserved time, priority will be given to the software
update.
When software update is completed, it will be notified ・ If F-05G is turned OFF at the reserved time, the
on the status bar. Open the application list→Select a software update starts at the same time as the
notification to display the update completion screen. reserved time after the terminal is turned ON.
◆ Reserving software update ・ If (Software update was suspended Please check
the status of the handset and retry.) appears on the
You can preset time to update the software if you status bar during software update, make sure that
want to specify another time for installing the update the terminal is not in the following states and retry
file. to update.
152 Appendix/Index
Display Type Display : TFT
Main specifications Sub-display : Organic EL
Size Display : Approx. 3.4
■Phone inches
Sub-display : Approx. 0.8
Product name F-05G inch
Size Approx. 113mm Number of Display : 16777216 colors
(H)×51mm (W)×15.8mm colors Sub-display : 1 color
Resolution Display : 480 (H) × 854 (V)
(T)
Weight Approx. 129g (with battery) pixels (FWVGA)
Internal memory ROM : 4GB Sub-display : 96 (H) × 39
RAM : 512MB (V) pixels
Continuou FOMA/3G Stationary (Auto) : Approx. Image Type Backside-illuminated
s stand-by 930 H pickup CMOS
time*1, 2 device Size 1/4.0 inch
Continuou FOMA/3G Approx. 520 min. Number of effective Approx. 8.1 million pixels
s call pixels
time*2, 3
Number of recording Approx. 8.1 million pixels
Continuous 1seg Approx. 470 min. pixels
watching time *4 (Max.)
Charging time*5 AC Adapter 05 : (alone) Digital Still image Up to approx. 4.0 x (32
Approx. 140 min., (for zoom levels)
Desktop Holder F49
combination use) Approx. Videos Up to approx. 4.0 x (32
150 min. levels)
DC Adapter 04 : Approx.
140 min.
153 Appendix/Index
Still picture recording 8M maximum pixels *3 Continuous call time indicates the estimated time that the
size 3264×2448 phone can send or receive radio waves normally.
Full HD 1920×1080 *4 Continuous 1Seg watching time indicates the estimated
Fit screen 854×480 watching time when radio signal reception is normal.
Mobile email 640×480 *5 Charging time indicates the estimated time for firstly
charging an empty battery pack with the terminal turned
Video recording size HD 1280×720 OFF for approximately 10 minutes, and then charging
Mobile email 640×480 with the terminal turned ON. When the temperature is
QVGA 320×240 high or low, it takes a long time for charging.
Bluetooth Version 4.0*6 *6 It is confirmed that the terminal and all Bluetooth devices
Function are compliant with Bluetooth standards designated by
Output power class 1 Bluetooth SIG, and they are authenticated. However,
Supported HFP, HSP, OPP, SPP, HID, procedures may differ or data transfer may not be
Bluetooth A2DP, AVRCP, PBAP, possible depending on the device's characteristics or
profile*7 HOGP specifications.
Display language Japanese/English *7 These are created by standardizing connection
procedures for Bluetooth communications according to
Input language Japanese/English individual product properties.
(Character entry)
*1 Continuous stand-by time indicates the estimated stand- ■Battery Pack
by time when radio signal reception is normal. Stationary Battery used Li-ion battery
continuous stand-by time indicates the estimated average
operation time when radio signal reception is normal. Nominal voltage 3.8V
Due to battery pack charging condition, function settings, Nominal 1700mAh
operating environment such as ambient temperature, capacity
radio wave conditions in the area of use (the radio waves
are weak or absent), etc. stand-by time may be reduced to ■Desktop holder
about half.
*2 Activating applications also reduces call Input DC5.0V 1.5A
(communication)/stand-by time even if you do not call or Output DC5.0V 1.5A
use the Internet.
154 Appendix/Index
❖File formats of still images and
videos taken by the terminal Specific Absorption Rate
(SAR) of Mobile Phones
Type File format Extension
Still images JPEG .jpg This model F-05G mobile phone complies with
Videos MP4 .mp4 Japanese technical regulations and international
guidelines regarding exposure to radio waves.
❖Saving number of still images This mobile phone was designed in observance of
(Estimation) Japanese technical regulations regarding exposure
to radio waves *1 and limits to exposure to radio
Shooting image microSD card waves recommended by a set of equivalent
Terminal
size (1GB) international guidelines. This set of international
8M maximum Approx. 700 Approx. 430 guidelines was set out by the International
pixels Commission on Non-Ionizing Radiation Protection
3264×2448 (ICNIRP), which is in collaboration with the World
Health Organization (WHO), and the permissible
❖Recording time of video limits include a substantial safety margin designed to
(Estimation) assure the safety of all persons, regardless of age and
health condition.
Shooting image microSD card The technical regulations and international
Terminal guidelines set out limits for radio waves as the
size (1GB)
Specific Absorption Rate, or SAR, which is the value
HD Approx. 24 min. Approx. 14 min. of absorbed energy in any 10 grams of tissue over a
1280×720 6-minute period. The SAR limit for mobile phones is
* Maximum recording time per one item is approximately 24 2.0 W/kg. The highest SAR value for this mobile
minutes (external memory : approximately 29 minutes). phone when tested for use at the ear is 0.563 W/kg
and when worn on the body is 0.583 W/kg*2. There
may be slight differences between the SAR levels for
each product, but they all satisfy the limit.
155 Appendix/Index
The actual SAR of this mobile phone while operating http://www.arib-emf.org/01denpa/denpa02-02.html
can be well below that indicated above. This is due to (in Japanese only)
automatic changes to the power level of the device to NTT DOCOMO, INC. Website:
ensure it only uses the minimum required to reach https://www.nttdocomo.co.jp/english/product/sar/
the network. Therefore in general, the closer you are FUJITSU LIMITED Website:
to a base station, the lower the power output of the http://www.fmworld.net/product/phone/sar/ (in
device. Japanese only)
This mobile phone can be used in positions other *1 Technical regulations are defined by the
than against your ear. Please keep the mobile phone Ministerial Ordinance Related to Radio Law
farther than 1.5 cm away from your body by using (Article 14-2 of Radio Equipment Regulations).
such as a carrying case or a wearable accessory *2 Not including other radio systems that can be
without including any metals. This mobile phone simultaneously used with FOMA.
satisfies the technical regulations and international
guidelines.
The World Health Organization has stated that "a
large number of studies have been performed over
the last two decades to assess whether mobile
phones pose a potential health risk. To date, no
adverse health effects have been established as being
caused by mobile phone use."
Please refer to the WHO website if you would like
more detailed information.
http://www.who.int/docstore/peh-emf/publications/
facts_press/fact_english.htm
Please refer to the websites listed below if you would
like more detailed information regarding SAR.
Ministry of Internal Affairs and Communications
Website:
http://www.tele.soumu.go.jp/e/sys/ele/index.htm
Association of Radio Industries and Businesses
Website:
156 Appendix/Index
◆ Declaration of Conformity incorporates a substantial margin of safety to
give additional protection for the public and to
account for any variations in measurements.
The product "F-05G" is declared to conform with *** Tests for SAR have been conducted using
the essential requirements of European Union standard operation positions with the phone
Directive 1999/5/EC Radio and transmitting at its highest certified power level in
Telecommunications Terminal Equipment all tested frequency bands. Although the SAR is
Directive 3.1(a), 3.1(b) and 3.2. The Declaration of determined at the highest certified power level,
Conformity can be found on http:// the actual SAR level of the phone while operating
www.fmworld.net/product/phone/doc/ (in can be well below the maximum value. This is
Japanese only). because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
This mobile phone complies with the EU closer you are to a base station antenna, the
requirements for exposure to radio waves. lower the power output.
Your mobile phone is a radio transceiver, designed
and manufactured not to exceed the SAR* limits** for ◆ Federal Communications
exposure to radio-frequency(RF) energy, which SAR*
value, when tested for compliance against the
Commission (FCC) Notice
standard was 0.447 W/kg for HEAD and 0.583 W/kg for ・ This device complies with part 15 of the FCC rules.
BODY. While there may be differences between the Operation is subject to the following two
SAR* levels of various phones and at various conditions :
positions, they all meet*** the EU requirements for RF a this device may not cause harmful interference,
exposure. and
b this device must accept any interference
* The exposure standard for mobile phones received, including interference that may cause
employs a unit of measurement known as the undesired operation.
Specific Absorption Rate, or SAR. ・ Changes or modifications made in or to the radio
** The SAR limit for mobile phones used by the phone, not expressly approved by the
public is 2.0 watts/kilogram (W/Kg) averaged manufacturer, will void the user's authority to
over ten grams of tissue, recommended by The operate the equipment.
Council of the European Union. The limit
157 Appendix/Index
・ The device complies with 15.205 of the FCC Rules. antenna, the lower the power output level of the
phone.
◆ FCC RF Exposure Information Before a phone model is available for sale to the
public, it must be tested and certified to prove to the
This model phone meets the U.S. Government's FCC that it does not exceed the limit established by
requirements for exposure to radio waves. the U.S. government-adopted requirement for safe
This model phone contains a radio transmitter and exposure. The tests are performed on position and
receiver. This model phone is designed and locations (for example, at the ear and worn on the
manufactured not to exceed the emission limits for body) as required by FCC for each model. The highest
exposure to radio frequency (RF) energy as set by the SAR value for this model phone as reported to the
FCC of the U.S. Government. These limits are part of FCC, when tested for use at the ear, is 0.95 W/kg, and
comprehensive guidelines and establish permitted when worn on the body, is 0.65 W/kg. (Body-worn
levels of RF energy for the general population. The measurements differ among phone models,
guidelines are based on standards that were depending upon available accessories and FCC
developed by independent scientific organizations requirements).
through periodic and thorough evaluation of While there may be differences between the SAR
scientific studies. levels of various phones and at various positions,
The exposure standard for wireless mobile phones they all meet the U.S. government requirements.
employs a unit of measurement known as the The FCC has granted an Equipment Authorization for
Specific Absorption Rate (SAR). The SAR limit set by this model phone with all reported SAR levels
the FCC is 1.6 W/kg. Tests for SAR are conducted evaluated as in compliance with the FCC RF exposure
using standard operating positions as accepted by guidelines. SAR information on this model phone is
the FCC with the phone transmitting at its highest on file with the FCC and can be found under the
certified power level in all tested frequency bands. Equipment Authorization Search section at http://
Although the SAR is determined at the highest www.fcc.gov/oet/ea/fccid/ (please search on FCC ID
certified power level, the actual SAR level of the VQK-F05G).
phone while operating can be well below the For body worn operation, this phone has been tested
maximum value. This is because the phone is and meets the FCC RF exposure guidelines. Please
designed to operate at multiple power levels so as to use an accessory designated for this product or an
use only the power required to reach the network. In accessory which contains no metal and which
general, the closer you are to a wireless base station
158 Appendix/Index
positions the handset a minimum of 1.5 cm from the ◆ Important Safety Information
body.
* In the United States, the SAR limit for wireless mobile AIRCRAFT
phones used by the general public is 1.6 Watts/kg (W/kg), Switch off your wireless device when boarding an
averaged over one gram of tissue. SAR values may vary aircraft or whenever you are instructed to do so by
depending upon national reporting requirements and the airline staff. If your device offers flight mode or
network band. similar feature consult airline staff as to whether it
This equipment has been tested and found to comply can be used on board.
with the limits for a Class B digital device, pursuant to DRIVING
part 15 of the FCC Rules. Full attention should be given to driving at all times
These limits are designed to provide reasonable and local laws and regulations restricting the use of
protection against harmful interference in a wireless devices while driving must be observed.
residential installation. This equipment generates, HOSPITALS
uses and can radiate radio frequency energy and, if Mobile phones should be switched off wherever you
not installed and used in accordance with the are requested to do so in hospitals, clinics or health
instructions, may cause harmful interference to radio care facilities. These requests are designed to prevent
communications. However, there is no guarantee that possible interference with sensitive medical
interference will not occur in a particular installation. equipment.
If this equipment does cause harmful interference to PETROL STATIONS
radio or television reception, which can be Obey all posted signs with respect to the use of
determined by turning the equipment off and on, the wireless devices or other radio equipment in
user is encouraged to try to correct the interference locations with flammable material and chemicals.
by one or more of the following measures: Switch off your wireless device whenever you are
- Reorient or relocate the receiving antenna. instructed to do so by authorized staff.
- Increase the separation between the equipment INTERFERENCE
and receiver. Care must be taken when using the phone in close
- Connect the equipment into an outlet on a circuit proximity to personal medical devices, such as
different from that to which the receiver is pacemakers and hearing aids.
connected. Pacemakers
- Consult the dealer or an experienced radio/TV Pacemaker manufacturers recommend that a
technician for help. minimum separation of 15 cm be maintained
159 Appendix/Index
between a mobile phone and a pace maker to avoid
potential interference with the pacemaker. To achieve Export Administration
this use the phone on the opposite ear to your
pacemaker and does not carry it in a breast pocket. Regulations
Hearing Aids
Some digital wireless phones may interfere with This product and its accessories may be under
some hearing aids. In the event of such interference, coverage of the Export Administration Regulations
you may want to consult your hearing aid of Japan ("Foreign Exchange and Foreign Trade
manufacturer to discuss alternatives. Control Laws" and the related laws and regulations).
For other Medical Devices : And, they may be also under coverage of Export
Please consult your physician and the device Administration Regulations of the U.S. When
manufacturer to determine if operation of your phone exporting and reexporting this product and its
may interfere with the operation of your medical accessories, take necessary procedures on your
device. responsibility and expense. For details, contact
Warning Ministry of Economy, Trade and Industry of Japan or
This device have been tested to comply with the US Department of Commerce.
Sound Pressure Level requirement laid down in the
applicable EN 50332-1 and/or EN 50332-2 standards.
Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged
periods of time.
<Prevention of Hearing Loss>
Warning statement requirement under EN 60950-
1:A12.
160 Appendix/Index
◆ Trademarks
Intellectual Property Right
・ "FOMA", "i-mode", "i-αppli", "Deco-mail", "mopera
U", "WORLD CALL", "WORLD WING", "sp-mode" are
◆ Copyrights and portrait rights trademarks or registered trademarks of NTT
DOCOMO, INC.
Except for the case protected by copyright laws such ・ "Catch Phone (Call waiting service)" is a registered
as personal use, use of terminal to reproduce, alter, or trademark of Nippon Telegraph and Telephone
publicly transmit recorded pictures or sounds, or Corporation.
copyrighted text, images, music or software ・ "ATOK" is a registered trademark of
downloaded from websites without the copyright JustSystems Corporation in Japan and
holder's authorization is prohibited. other countries. "ATOK" is a copyrighted
Note that taking photos or recordings at some work of JustSystems Corporation and
demonstrations, performances or exhibitions may be other rights are those of JustSystems Corporation
prohibited even when only for personal use. and respective owners.
Avoid taking pictures of others with the terminal ・ QR code is a registered trademark of Denso Wave
without their consent or disclosing recorded pictures Inc.
of others without their consent to general public ・ microSD logo and microSDHC logo
through Internet websites etc., because they may are trademarks of SD-3C, LLC.
infringe on portrait rights. ・ Google, Android and other marks are trademarks of
Google Inc.
・ The Bluetooth® smart ready word mark and logos
are owned by the Bluetooth SIG, INC. and any use
of such marks by NTT DOCOMO, INC. is under
license. Other trademarks and names are those of
their respective owners.
・ aptX is a trademark of CSR plc.
・ LINE is a trademark or registered trademark of Line
Corporation.
161 Appendix/Index
・ "UD新丸ゴ (UD Shin Maru Go)" is provided by ・ This product is licensed under the AVC patent
Morisawa Inc. and the copyrights of its font data portfolio license for the personal and
belong to them. noncommercial use of a consumer to (i) encode
・ OBEX™ is a trademark of Infrared Data video in compliance with the AVC standard
Association®. (henceforth referred to as AVC video) and/or (ii)
decode AVC video that was encoded by a consumer
・ Other company and product names mentioned in engaged in a personal and noncommercial activity
this manual are trademarks or registered and/or was obtained from a video provider licensed
trademarks of their respective holders. to provide AVC video. No license is granted or shall
・ All other trademarks are those of their respective be implied for any other use. Additional
owners. information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
◆ Others
◆ Open source software
・ Part of this product includes module developed by
Independent JPEG Group. ・ Software licensed under Apache License V2.0 and
・ This product is licensed based on MPEG-4 Visual necessarily modified by us is used for this product.
Patent Portfolio License. The use of MPEG-4 Video ・ This product contains open source software
Codec function is allowed for personal and complying with GNU General Public License (GPL),
nonprofit use only in the cases below. GNU Lesser General Public License (LGPL), etc.
- Recording moving pictures and i-motion that For details on the software license, on the stand-by
conform to MPEG-4 Visual Standard (hereinafter screen, m→[Settings]→[Device mgt]→[About
referred to as MPEG-4 Video) phone]→[Legal information]→See [Open source
- Playing MPEG-4 Videos recorded personally by licenses].
consumers not engaged in profit activities For software source codes disclosed based on the
- Playing MPEG-4 Video supplied from the provider open source licenses, refer to the following
licensed from MPEG-LA website. For details, refer the website below.
For further utilizing such as promotion, in-house http://spf.fmworld.net/fujitsu/c/develop/sp/android/
use or profit-making business, please contact (In Japanese only)
MPEG LA, LLC in U.S.
162 Appendix/Index
SIM unlock
This terminal supports SIM unlock. If you release SIM
lock, you can use SIM by a carrier other than NTT
DOCOMO.
・ Available services and functions may be limited.
DOCOMO is not liable to any failures or
malfunctions.
・ For details of SIM unlock procedure, refer to NTT
DOCOMO website.
1 DOCOMO
Install SIM by a carrier other than NTT
163 Appendix/Index
索引
Settings ........................................................................ 130
Index Authentication information ........................................... 103
Auto-key lock .................................................................. 101
Automatic still image shooting ....................................... 77
Adjust flicker.................................................................. 78
Auto focus...................................................................... 78
A Automatic exposure...................................................... 78
About phone................................................................... 112 Scene mode................................................................... 78
Legal information ....................................................... 112 White balance................................................................ 78
Status........................................................................... 112 Automatic video recording .............................................. 79
Access Point Adjust flicker.................................................................. 79
Adding ............................................................................97 Auto focus...................................................................... 79
Access point ......................................................................97 White balance................................................................ 79
Checking.........................................................................97
Initializing .......................................................................98 B
Accessibility.................................................................... 112 Back cover ......................................................................... 31
Text-to-speech output ................................................ 112 Battery ............................................................................... 96
Advanced settings ......................................................... 109 Battery life...................................................................... 42
After-Sales Service......................................................... 146 Charging ........................................................................ 41
Airplane mode ...................................................................98 Best view adjust................................................................ 95
Alarm..................................................................................88 Bluetooth antenna section............................................... 31
APN.....................................................................................97 Bluetooth communication ............................................. 124
Application list ..................................................................36 Canceling connection ................................................. 126
Apps ................................................................................ 110 Connecting................................................................... 125
Clear cache.................................................................. 110 Function ON/OFF......................................................... 125
Clear data .................................................................... 110 Pair setting................................................................... 125
Disabling ..................................................................... 111 Renaming..................................................................... 127
Area Mail......................................................................... 129 Sending/Receiving data.............................................. 126
Beep tone .................................................................... 130 Unpairing ..................................................................... 127
Check screen image and beep tone .......................... 130 Bookmark .......................................................................... 72
Deleting ....................................................................... 129 Bookmarks
Displaying ................................................................... 129 Deleting.......................................................................... 73
Receive setting............................................................ 130 Editing ............................................................................ 72
Receiving..................................................................... 129 Registering..................................................................... 72
164 Appendix/Index
Brightness..........................................................................96 AC adapter ..................................................................... 44
Browser..............................................................................68 Charging adapter .......................................................... 42
Bookmark .......................................................................72 Desktop holder .............................................................. 43
Drag mode .....................................................................70 PC ................................................................................... 45
Key operation.................................................................69 Precautions .................................................................... 41
Mobile mode..................................................................70 Charging jack..................................................................... 31
Mouse mode ..................................................................70 Clearing credentials ........................................................ 103
Pointer operation...........................................................70 Connecting with a PC ..................................................... 120
Settings ..........................................................................73 Camera (PTP)............................................................... 121
Site viewing history.......................................................73 Connecting with a PC with the USB cable ................ 121
Media device (MTP) .................................................... 121
C
Calculator...........................................................................90 D
Call forwarding service.....................................................59 Data communication/Airplane mode ............................. 96
Call notification .................................................................59 Data enabled ..................................................................... 97
Call waiting........................................................................59 Data roaming................................................................... 132
Caller ID display request service......................................59 Data usage......................................................................... 96
Camera ...............................................................................31 Date .................................................................................. 107
Automatic still image shooting ....................................77 Date & time ..................................................................... 107
Automatic video recording ...........................................79 Automatic date & time................................................ 108
Cautions on shooting ....................................................75 Automatic time zone................................................... 108
Shooting settings for still image ..................................78 Choose date format .................................................... 108
Shooting settings for video ..........................................80 Select time zone .......................................................... 108
Still image shooting ......................................................77 Set date ........................................................................ 108
Video shooting...............................................................79 Set time........................................................................ 108
Character entry..................................................................45 Use 24-hour format..................................................... 108
Editing text .....................................................................48 Daydream ........................................................................ 109
Entering pictogram/smiley/symbol..............................47 Device administrators ...................................................... 99
Quote data......................................................................47 Device management....................................................... 107
Quote phrase .................................................................47 Dial touch tones ................................................................ 93
Registering phrases.......................................................48 Disaster Message Board................................................. 128
Registering words .........................................................47 Disaster Voice Messaging.............................................. 128
Settings ..........................................................................47 Display ............................................................................... 31
Charging.............................................................................41 Display & Wallpaper ......................................................... 95
165 Appendix/Index
dmenu ................................................................................68
docomo mail......................................................................64
G
docomo nano UIM card ....................................................39 Guide area ......................................................................... 36
Installing.........................................................................39
Removing .......................................................................40 H
Security code ........................................................ 40, 100 Hiding restartable applications ..................................... 104
docomo service .............................................................. 107
docomo apps password............................................. 107 I
docomo location information.................................... 107 Icon
Remote Initialization Service ..................................... 107 Notification icon ............................................................ 35
Send device error information .................................. 107 Status bar....................................................................... 35
Switch USB debugging.............................................. 107 Status icon ..................................................................... 35
Draining water...................................................................28 Incoming vib...................................................................... 93
Indicator LED .............................................................. 31, 38
E Infrared communication................................................. 122
Early warning "Area Mail"............................................. 129 Receiving ..................................................................... 123
Earpiece..............................................................................31 Sending all items ........................................................ 123
Easy data transfer support...............................................51 Sending My profile ..................................................... 123
Editing text ........................................................................48 Sending one item........................................................ 123
English............................................................................. 106 Infrared data port.............................................................. 31
English guidance ...............................................................60 Initial settings.................................................................... 49
Error messages............................................................... 145 Initialize............................................................................ 108
Export Administration Regulations.............................. 160 Initializing data................................................................ 108
External connection jack ..................................................31 Install certificates............................................................ 103
External device connection ........................................... 120 Intellectual Property Right ............................................. 161
Connecting with a PC ................................................. 120 Internal storage............................................................... 113
External storage ............................................................. 113 International call (WORLD CALL) .................................... 55
International roaming (WORLD WING)......................... 131
F Network service........................................................... 136
FAQ.................................................................................. 140 Settings for making/receiving calls............................ 135
File operations................................................................ 115
Focus mode .......................................................................37
FOMA antenna section .....................................................31
Font size.......................................................................... 106
166 Appendix/Index
K N
Keyboard Network Mode ................................................................ 133
External keyboard..........................................................49 Network operators ......................................................... 133
Network security code ................................................... 100
L New information icon....................................................... 37
Language/Text/Input..................................................... 106 Notification icon................................................................ 35
LINE ....................................................................................86 Notification LED ................................................................ 94
Location .......................................................................... 111 Notification sound ............................................................ 93
Lock on close .................................................................. 101 Notifying caller ID ...................................................... 53, 59
Lock screen Nuisance call blocking service......................................... 59
Screen wallpaper...........................................................95
Lock & Security .................................................................98 O
Open assist button ........................................................... 31
M Open source software .................................................... 162
Mail.....................................................................................64
Quick mail ......................................................................65 P
Manner mode ....................................................................94 Phone ................................................................................. 53
Manner mode ................................................................95 Call settings ................................................................... 59
Manner mode (Alarm)...................................................95 Caller ID notification .............................................. 53, 59
Manner mode (Silent) ...................................................95 Emergency call .............................................................. 54
Material ..............................................................................16 Making a call.................................................................. 53
Memo .................................................................................89 Receiving a call.............................................................. 56
Menu ..................................................................................33 Select prefix................................................................... 53
List ............................................................................... 138 Touch-tone signals........................................................ 53
Microphone........................................................................31 Phone memo ..................................................................... 59
microSD card .................................................................. 113 ON/OFF........................................................................... 59
Erasing data ................................................................ 108 Phone memo list ........................................................... 59
Format ......................................................................... 108 Settings .......................................................................... 59
Operation from a PC................................................... 120 Phone ringtone.................................................................. 93
microSD password......................................................... 100 Phonebook......................................................................... 61
My feature button .......................................................... 107 Deleting.......................................................................... 62
Editing ............................................................................ 63
Registration ................................................................... 61
167 Appendix/Index
Using Group...................................................................63 Screenshot......................................................................... 38
PIN code .......................................................................... 100 SD card and storage area............................................... 108
Changing ..................................................................... 105 Mount SD card ............................................................ 108
Input............................................................................. 105 Total space................................................................... 108
Setting ......................................................................... 105 Unmount SD card ....................................................... 108
Pointer................................................................................34 SD card backup ................................................................. 91
Profile .................................................................................38 SD card password settings ............................................ 104
Public mode (power OFF) settings ..................................60 Authenticate password............................................... 104
PUK code......................................................................... 100 Change password ....................................................... 104
Delete password.......................................................... 104
Q Forcibly delete password ........................................... 104
QR code reader..................................................................80 Registering password ................................................. 104
Reading ..........................................................................80 Second call settings.......................................................... 59
Quick mail ..........................................................................65 Security unlock preference ............................................ 102
Quick Mail Settings .......................................................66 Password ..................................................................... 102
Security code............................................................... 102
R Set up SIM/RUIM card lock ........................................... 105
Settings menu................................................................... 93
Redial/Received calls ........................................................58 Shooting settings for still image..................................... 78
Remote operation settings ..................................... 60, 136 Camera Mode ................................................................ 78
Reset................................................................................ 108 Shooting Image Size..................................................... 78
Roaming settings ........................................................... 135 Shooting settings for video ............................................. 80
Network service (overseas) ....................................... 136 Camera Mode ................................................................ 80
Saving location.............................................................. 80
S Shooting Image Size..................................................... 80
SAR.................................................................................. 155 Short-cut operation .......................................................... 34
Save screen........................................................................38 Show password ................................................................ 98
Schedule ............................................................................87 SIM unlock....................................................................... 163
Deleting ..........................................................................88 SMS.................................................................................... 66
Registering .....................................................................87 Creating.......................................................................... 66
Screen lock Deleting.......................................................................... 67
Lock.............................................................................. 102 Displaying ...................................................................... 67
Security unlock preference ........................................ 102 Receiving ....................................................................... 67
Screen timeout..................................................................96 Replying ......................................................................... 67
168 Appendix/Index
Sending ..........................................................................66 Unlocking PIN lock.......................................................... 105
Setting ............................................................................68 Unoperated lock.............................................................. 101
Software update ............................................................ 149 Useful tools ..................................................................... 106
Automatic Update ...................................................... 150 Using overseas................................................................ 131
Now update................................................................. 151 After returning to Japan ............................................. 137
Reserved update......................................................... 152 Checking ...................................................................... 131
Sound at start charging....................................................93 Communication services ............................................ 131
Sound/Vib/LED .................................................................93 Making a call in the country you stay........................ 134
Speaker ..............................................................................31 Receiving a call in the country you stay.................... 134
Specifications ................................................................. 153 Settings ........................................................................ 132
Stand-by screen
Customizing ...................................................................95 V
Status bar ..........................................................................35 Video shooting screen...................................................... 77
Status icon.........................................................................35 Virtual Private Network ................................................. 110
Still image shooting screen .............................................77 Voice mail service ............................................................. 59
Stopping packet connection ............................................97 Volumes............................................................................. 94
Storage............................................................................ 113 VPN .................................................................................. 110
Storage type ................................................................... 103 Adding.......................................................................... 110
Strap hole ..........................................................................31 Connection................................................................... 110
Sub-display ................................................................. 31, 37 Disconnecting.............................................................. 110
T W
Task manager ....................................................................52 Warranty .......................................................................... 146
Text-to-speech output ................................................... 112 Waterproofness/Dustproofness ...................................... 23
Time................................................................................. 107 Widget.............................................................................. 109
Timer ..................................................................................90 WORLD CALL..................................................................... 55
Trademarks..................................................................... 161 WORLD WING ................................................................. 131
Troubleshooting............................................................. 140
Trusted credentials ........................................................ 103
Turning power off .............................................................45
z
Turning power on .............................................................45 1seg .................................................................................... 82
Activating....................................................................... 83
U Channel setting ............................................................. 86
End ................................................................................. 83
Unknown sources .......................................................... 105
169 Appendix/Index
Settings ..........................................................................84
Signal..............................................................................82
TV link.............................................................................85
Using 1seg .....................................................................82
1seg antenna .....................................................................31
1seg watching screen .......................................................83
170 Appendix/Index
Match the volume of voice and ring alert to
Use mobile phone with your manners! your location
Remember to be courteous to others when you use
■ In a quiet place like a restaurant or hotel
your terminal. lobby, pay attention to the volume of your
Always turn OFF your terminal in cases voice etc. when using the terminal.
below ■ In town areas, while using the terminal, be
sure not to block foot or car traffic.
■ In a place where use of mobile phone is
prohibited Consider privacy
Follow the instructions of each airline or medical ■ Please be considerate of the privacy of
facility for the use of mobile phones on their individuals around you when taking and
premises. Power off the terminal in a place where sending photos using camera-equipped
the use is prohibited. terminals.
Always set Public mode in cases below
■ When driving
There is a penalty for holding or using the terminal
while driving. However, absolutely necessary
cases such as rescue of a sick person and
maintaining public safety are exempted.
■ In public places such as a theater, movie
theater or art museum
Using the terminal in quiet public places will likely
bother other people.
171
Functions designed for public use
Your terminal has a number of useful functions
designed for public use, such as a setting that
instructs your terminal not to answer incoming calls
and the ability to set the terminal for silent
operation.
●Public mode (Power OFF)→P60
The caller hears an announcement notifying that
the receiver is in a place requiring power-off of
mobile phone, and the call is disconnected.
●Vibrate→P93
Vibrates when there is an incoming call.
●Manner mode→P94
Eliminates all sounds the terminal makes, such as
ring alert and keypad/touch sound (Shutter sound
cannot be eliminated).
And you can use optional services such as Voice
mail Service, Call Forwarding Service , etc.→P59
172
Online Procedures, Confirmation of Subscription, etc.
For loss, theft, malfunction, and inquiries while overseas (24-hour reception)
0120-005-250 (toll free) ■ From DOCOMO mobile phones (In Japanese only)
* Service available in: English, Portuguese, Chinese, Spanish (No prefix) 113 (toll free)
* Unavailable from part of IP phones.
* Unavailable from land-line phones, etc.
(Business hours : 9:00 a.m. to 8:00 p.m.)
■ From DOCOMO mobile phones (In Japanese only) ■ From land-line phones (In Japanese only)