Professional Documents
Culture Documents
PP67-PE-EXT-CT-DOR-DS-J-012_rev01 - CT - Flow Transmitter Vortex Type Data Sheets
PP67-PE-EXT-CT-DOR-DS-J-012_rev01 - CT - Flow Transmitter Vortex Type Data Sheets
: PP67-PE-EXT-CT-DOR-DS-J-012
Peru Block 67 Field Development
Revision: 01 Rev Date :08-Jul-2011
CT - FLOW TRANSMITTER
VORTEX TYPE DATA SHEETS
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
R:\652284\Typing\Docs\Native\Documents\J-Instrumentation-CS\PP67-PE-EXT-CT-DOR-DS-J-012_rev01 - CT - Flow Transmitter Vortex Type Data Sheets\PP67-PE-EXT-CT-DOR-DS-J-012_rev01
- CT - Flow Transmitter Vortex Type Data Sheets.doc
Doc. Ref.: PP67-PE-EXT-CT-DOR-DS-J-012
Peru Block 67 Field Development
Revision: 01 Rev Date :08-Jul-2011
INDEX
1 GENERAL ..................................................................................................................................................3
2 PROJECT DOCUMENTS...........................................................................................................................3
3 DEFINITIONS .............................................................................................................................................3
4 APPENDIX: CT – FLOW TRANSMITTER VORTEX TYPE DATA SHEETS:...........................................3
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
R:\652284\Typing\Docs\Native\Documents\J-Instrumentation-CS\PP67-PE-EXT-CT-DOR-DS-J-012_rev01 - CT - Flow Transmitter Vortex Type Data Sheets\PP67-PE-EXT-CT-DOR-DS-J-012_rev01
- CT - Flow Transmitter Vortex Type Data Sheets.doc
Doc. Ref.: PP67-PE-EXT-CT-DOR-DS-J-012
Peru Block 67 Field Development
Revision: 01 Rev Date :08-Jul-2011
1 GENERAL
The purpose of this document is to provide CT – Flow Transmitter Vortex Type Data Sheets for the Peru
Block 67 Field Development Project.
The design and supply of Flow Transmitter (Vortex Type) shall be in full compliance with the Project
documentation referenced in section 2.
2 PROJECT DOCUMENTS
3 DEFINITIONS
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
R:\652284\Typing\Docs\Native\Documents\J-Instrumentation-CS\PP67-PE-EXT-CT-DOR-DS-J-012_rev01 - CT - Flow Transmitter Vortex Type Data Sheets\PP67-PE-EXT-CT-DOR-DS-J-012_rev01
- CT - Flow Transmitter Vortex Type Data Sheets.doc
Requisition number: P. O. number:
Rev. No. Item Number Tag Number Instrument Type Page No.
01 1 CT-FT -PA16101 Flow Transmitter Vortex Type S-1
01 2 CT-FT -V93301 Flow Transmitter Vortex Type S-2
21 Type Vortex
22 Process Connection :
23 Diameter Rating inches (a) (c) 600#
24 Flange Face Flange Finish RF Smooth Finish
25 Enclosure SS 316L
SENSOR 26 Nominal Size inches (a)
27 Wetted Parts SS 316(L)
28 Body Material Carbon Steel (b)
29 Pressure Drop @ Maxi Flow bar (a)
30
31
32 Enclosure Ingress Protection SS 316L IP 55 mini
33 Calibration Flow Range Mini Flow Am3/h 145 (a)
34 Loop Supply Low Flow Cut Off Volts 24V DC Am3/h (a)
35 Local Display Yes
36 Accuracy Repeatability % +/- 1% of flow rate % +/- 0.25% of flow rate
37 Analog Output Frequence Output mA 4-20 mA NA
TRANSMITTER
38 Cables Gland 3/4" or 1/2" NPT F (d)
39 HART Protocol Yes
40 Scale mini/maxi (a)
41
42
43
44 Weight Kg (a)
WEIGHT
45
46 Manufacturer
PURCHASE
47 Model (a)
- (a) Vendor to advise.
- (b) Refer to "Piping Material Classes" referenced PP67-PE-GEN-00-DOR-SP-Q-004.
Notes - (c) Vendor to calculate the best diameter for the flowrate maxi +20%.
Instrumentation - (d) Cable galnd(s) shall be supplied by vendor. Contractor will define make and model at a later stage.
Vortex Flowmeters
21 Type Vortex
22 Process Connection :
23 Diameter Rating inches (a) (c) 150#
24 Flange Face Flange Finish RF (b)
25 Enclosure SS 316L
SENSOR 26 Nominal Size inches (a)
27 Wetted Parts SS 316(L)
28 Body Material Carbon Steel (b)
29 Pressure Drop @ Maxi Flow bar (a)
30
31
32 Enclosure Ingress Protection SS 316L IP 55 mini
33 Calibration Flow Range Mini Flow Am3/h 4.8 (e) (a)
34 Loop Supply Low Flow Cut Off Volts 24V DC Am3/h (a)
35 Local Display Yes
36 Accuracy Repeatability % +/- 1% of flow rate % +/- 0.25% of flow rate
37 Analog Output Frequence Output mA 4-20 mA NA
TRANSMITTER
38 Cables Gland 3/4" or 1/2" NPT F (d)
39 HART Protocol Yes
40 Scale mini/maxi (a)
41
42
43
44 Weight Kg (a)
WEIGHT
45
46 Manufacturer
PURCHASE
47 Model (a)
- (a) Vendor to advise.
- (b) Refer to "Piping Material Classes" referenced PP67-PE-GEN-00-DOR-SP-Q-004.
Notes - (c) Vendor to calculate the best diameter for the flowrate maxi +20%.
Instrumentation - (d) Cable galnd(s) shall be supplied by vendor. Contractor will define make and model at a later stage.
- (e) At operating pressure 9 barg
Vortex Flowmeters