Professional Documents
Culture Documents
PDP_Pluggable_data_cable_protection_en
PDP_Pluggable_data_cable_protection_en
1
Data cable protection and EMC
Data cable
For effective protection of the system, it is important
that the cable shields are connected to the equipotential Shield not connected
bonding at both ends. The connection can be made di-
Equipotential busbar
rectly or indirectly. For this reason, the PDP series offers
devices for directly and indirectly earthed systems. Earth connection
2
Direct shield earthing Indirect shield earthing
The direct earthing of the shield on both sides should When dealing with particularly long cables or cables be-
always be chosen when dealing with cables which are tween buildings, it is wise to earth the shield indirectly
routed within a building and the earthing potentials do on one side. For this, the shield is connected with the
not differ from each other at the ends of the cable. This earth potential directly at one end of the cable and using
guarantees good protection against inductive, magnetic a GDT* at the other end.
and capacitive couplings.
This prevents a possible load on the shield due to com-
pensation currents through potential differences of the
different earthing systems, as the spark gap insulates
the connection to the second earth potential.
Device 1 Device 1
Device 2 Device 2
Equipotential busbar
Cable shield earthed at both ends
Earthing cable
3
PDP and PDP-OS
PDP PDP-OS PS
4
A block with up to 25 surge Combination of all the PDP-OS vari-
protective devices can be con- ants possible in a single block
nected to each power supply
OK OK
Defective Defective
5
Reliable protection in every detail
Direct earthing
6
Scope of delivery
Indirect earthing
DIN rail
1.5 kV
1.3 kV
PDP-PS
10 kA
10 kA
C2: 10 kV/5 kA
C2: 10 kV/5 kA
20 kA
D1: 2.5 kA
D1: 2.5 kA
7
OBO Bettermann Holding GmbH & Co.KG
Hüingser Ring 52
58710 Menden
GERMANY
© OBO Bettermann 09/2021 EN
Customer Service
Tel.: +49 (0)2373 89-1700
Fax: +49 (0)2373 89-1238
export@obo.de
www.obo-bettermann.com