Professional Documents
Culture Documents
BNL - A318 _ A319 _ A320 _ A321 - AMM - 01-Feb-2024 - 24-92-00-210-014-A - Apply Temporary Protection to End Fittings of Electrical Conduits in Main Landing Gear Bay and False Spar Box
BNL - A318 _ A319 _ A320 _ A321 - AMM - 01-Feb-2024 - 24-92-00-210-014-A - Apply Temporary Protection to End Fittings of Electrical Conduits in Main Landing Gear Bay and False Spar Box
WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING GEAR. THIS WILL
PREVENT UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS POSSIBLE INJURY TO PERSON
S AND DAMAGE TO THE AIRCRAFT AND/OR EQUIPMENT.
WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON
OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMA
GE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS INCLUDED IN THE REFERENCE
D PROCEDURES.
WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S IN
STRUCTIONS AND YOUR LOCAL REGULATIONS.
QT
REFERENCE DESIGNATION
Y
B. Consumable Materials
REFERENCE DESIGNATION
D. Referenced Information
REFERENCE DESIGNATION
Ref. 24-41-00-862-002-A De-energize the Aircraft Electrical Circuits Supplied from the External
Power
Ref. 24-41-00-862-002-A01 De-energize the Aircraft Electrical Circuits Supplied from the APU
Ref. 24-41-00-862-002-A02 De-energize the Aircraft Electrical Circuits Supplied from the Engine 1
(2)
3. Job Set-up
SUBTASK 24-92-00-862-064-A
A. De-energize the aircraft electrical circuits
Ref. AMM TASK 24-41-00-862-002.
SUBTASK 24-92-00-869-079-A
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
AIRCRAFT REVISION REVISION
CUSTOMIZATION DOCTYPES TITLE
TYPES DATE NUMBER
A318 A319 A321 24-92-00-210-014-A - Apply Temporary Protection to End Fittings of
BNL AMM 01-Feb-2024 14
A320 Electrical Conduits in Main Landing Gear Bay and False Spar Box
TAIL NUMBER - MSN - FSN:
SUBTASK 24-92-00-010-064-C
C. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the MLG well and false spar b
ox.
(2) Remove and retain the access panels:
- For the left wing:
- 574AB Ref. AMM TASK 57-51-37-000-008
- 574BB Ref. AMM TASK 57-51-37-000-009.
- For the right wing:
- 674AB Ref. AMM TASK 57-51-37-000-008
- 674BB Ref. AMM TASK 57-51-37-000-009.
(3) If necessary, remove the overwing panel protection Ref. AMM TASK 57-51-42-000-001.
4. Procedure
SUBTASK 24-92-00-210-064-A
A. Temporary Protection of the Electrical Conduits End-Fittings in the Main Landing Gear Bay and the False S
par Box
Ref. Fig. Electrical Harness Conduits - Corrosion Protection
Ref. Fig. Typical Fittings
Ref. Fig. Location of Conduit Fittings
Ref. Fig. Location of Conduit Fittings
WARNING: BE CAREFUL NOT TO CUT YOUR FINGERS. FLAKES OF NICKEL ARE SHARP.
(1) At each fitting use the procedure that follows to protect against corrosion:
(a) Use Non Aqueous Cleaner-General - - (Material Ref. 08BAA9) and a Textile-Lint free Cotton -
(Material Ref. 14SBA1) to remove any contamination from the fitting.
NOTE: We recommend that you use a dental tool or a seal tool (non metallic) to remove
the flakes and the blisters.
(c) During this task, make sure that the base metal is not damaged.
(d) Use a BRUSH - BRISTLED or an SPRAY - BOTTLE, PUMP TYPE (NON AEROSOL) to apply a c
ontinuous thin and smooth coat of Corrosion Preventive Compound-Heavy Duty Hard Film -
(Material Ref. 12ACB1), to cover all the fitting Ref. ESPM 20-33-30.
5. Close-up
SUBTASK 24-92-00-410-065-C
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the overwing panel protection, if removed Ref. AMM TASK 57-51-42-400-001.
(3) Install the access panels:
- For the left wing:
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
AIRCRAFT REVISION REVISION
CUSTOMIZATION DOCTYPES TITLE
TYPES DATE NUMBER
A318 A319 A321 24-92-00-210-014-A - Apply Temporary Protection to End Fittings of
BNL AMM 01-Feb-2024 14
A320 Electrical Conduits in Main Landing Gear Bay and False Spar Box
TAIL NUMBER - MSN - FSN:
CONDUIT FITTINGS
CONDUIT FITTINGS
N_MM_249200_6_CGM0_01_00
BACKSHELL
TRANSITION CONNECTOR
A B A B
N_MM_249200_6_ALM0_01_00
Z571
(Z671)
1 1
1 1
1
1
N_MM_249200_6_CJM0_01_00
UP
B
O U T B OA R D
F O R WA R D
1
O U T B OA R D
C 1
RIB2
RH VIEW ON
LH VIEW ON RIB1
C-C
C-C
1 1
RH LANDING
LH LANDING LAMP
LAMP
N_MM_249200_6_CJM0_02_00
1 1
1
1
B C
1 1
C 1 B
1
1
1
1
1
1
N_MM_249200_6_CLN0_01_00