Professional Documents
Culture Documents
TDS STRIP MESH
TDS STRIP MESH
Part 1. GENERAL
1. DESCRIPTION
Plastering accessories composed of beads and expanded metal lath used to reinforce the plaster and
preventing it from cracking.
2. REFERENCE STANDARDS
PRE-GALVANIZED: BEADS:
BS EN 10346 (replaced BS EN 10327) BS EN 13658-1&2 (replaced BS 6452-1)
ASTM A 653 ASTM C 1063
STAINLESS STEEL: QCS 2014 (QATAR CONSTRUCTION SPECIFICATION)
BS EN 10088 – sheets, strips, coils LATH:
ASTM A 240 – sheets, strips, coils BS EN 13658-1&2 (replaced BS 1369-1)
ASTM C 1063
ASTM C 847
QCS 2014 (QATAR CONSTRUCTION SPECIFICATION)
MATERIAL
A. BEAD
1. ANGLE BEAD
Angle Bead – used for reinforcement and protection of plaster from cracking especially
where a true straight outside corners are required in a building.
1. CORNER MESH
Corner Mesh – used for reinforcement of plaster for inside corners to prevent
cracks and give corner a straight finish
Wings
Type Code Length (m) Material
(mm)
CM50 gs / ss 50 x 50 2.7 / 2.44 galvanized steel / stainless steel
CM75 gs / ss 75 x 75 2.7 / 2.44 galvanized steel / stainless steel
CM100 gs / ss 100 x 100 2.7 / 2.44 galvanized steel / stainless steel
Diamond Metal Lath Sheets – used as background for plastering in walls and
suspended ceiling