Professional Documents
Culture Documents
- SRM - 01-May-2024 - TASK 53-41-11-205-136 - FR64 Thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
- SRM - 01-May-2024 - TASK 53-41-11-205-136 - FR64 Thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
A320 SRM 01-May-2024 149 TASK 53-41-11-205-136 - FR64 thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
TASK 53-41-11-205-136
FR64 thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
1. Task Supporting Data
A. General
This task gives the necessary information to inspect the allowable damage and blend-out (rework) affecting partially or totally a dented area on the
skin fuselage.
The related allowable damage data is given in TASK 53-41-11-283-069.
B. Area of Applicability
This task is applicable to the fuselage skin in the area from FR64 thru FR70 in Area 1, Area 2 and Area 3, refer to Figure 001, Figure 002 and Figure 0
03.
NOTE: This task is applicable to the weight variants listed in the associated allowable damage limit task.
D. Limits/Restrictions
This paragraph is intentionally left blank.
E. Repair Category
This paragraph is intentionally left blank.
F. Inspection
This paragraph is intentionally left blank.
(2) References
TASK 53-41-11-283-069
NTM Chapter 51-10-08
NTM Task 51-10-16-250-801
NTM Task 51-10-16-250-802
2.
A. FR64 thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE REVISION NUMBER TITLE
A320 SRM 01-May-2024 149 TASK 53-41-11-205-136 - FR64 thru FR70 - Inspection for Skin Dented Area - Blend-out ADL (Rework)
(1) Location
For the inspection instruction applicability:
- Allowable dent and blend-out (rework) - option 1 and dress out, refer to Table 1
- Allowable dent and blend-out (rework) - option 2, refer to Table 2.
Table 1 - Inspection Instructions for Allowable Dent and Blend-Out (Rework) - Option 1 and Dress Out
<1> See SRI INTRO instructions if the aircraft has already exceeded the threshold.
<2> Applicable after Modification 160500J3283 (Certify Sharklet Installation for A320/A319/A318) and Modification 160080J3705 (Defin
e and Certify Installation of Sharklet on Non-reinforced A/C (by SB)).
Table 2 - Inspection Instructions for Allowable Dent and Blend-Out (Rework) - Option 2
A
STGR32LH
FR70
STGR32RH
FR64
FR64 FR65 FR66 FR67 FR68 FR69 FR70
STGR6LH
STGR7LH
STGR9LH
STGR11LH
STGR14LH
01
STGR18LH
STGR20LH
STGR23LH
STGR26LH
STGR32LH
A
VIEW FROM OUTSIDE
INSPECTION INSPECTION
REFERENCE INSTRUCTIONS
NOTE:
01 THIS WINDOW IS A CUSTOMER OPTION.
FOR DETAIL B, SEE SHEET 2. N_SR_534111_3_6ECM000A_01_00
Figure 001 / 53-41-11-205-136 (SHEET 1/2) - Lateral Skin Panel - Inspection Area 1
STGR6RH
STGR7RH
STGR9RH
STGR11RH
STGR14RH
01
STGR18RH
STGR20RH
STGR23RH
STGR26RH
STGR32RH
B
VIEW FROM OUTSIDE
INSPECTION INSPECTION
REFERENCE INSTRUCTIONS
NOTE:
01 THIS WINDOW IS A CUSTOMER OPTION.
N_SR_534111_3_6ECM000B_01_00
Figure 001 / 53-41-11-205-136 (SHEET 2/2) - Lateral Skin Panel - Inspection Area 1
STGR32LH
FR70
STGR32RH
A FR64
STGR32LH
STGR33LH
STGR34LH
STGR36LH
STGR38LH
STGR35LH
STGR40LH STGR39LH
STGR41LH
STGR42LH
STGR43LH
STGR44
STGR43RH
STGR42RH STGR41RH
STGR40RH STGR39RH
STGR35RH
STGR38RH
STGR36RH
STGR34RH
STGR33RH
STGR32RH
A
VIEW FROM OUTSIDE
INSPECTION INSPECTION
REFERENCE INSTRUCTIONS
N_SR_534111_3_6EDM000A_01_01
A
STGR32LH
FR70
STGR32RH
FR64
STGR6LH
STGR7LH
STGR9LH
STGR11LH
STGR14LH
01
STGR18LH
STGR20LH
STGR23LH
STGR26LH
STGR32LH
A
VIEW FROM OUTSIDE
INSPECTION INSPECTION
REFERENCE INSTRUCTIONS
NOTE:
01 THIS WINDOW IS A CUSTOMER OPTION.
FOR DETAIL B, SEE SHEET 2. N_SR_534111_3_6EEM000A_01_00
Figure 003 / 53-41-11-205-136 (SHEET 1/2) - Lateral Skin Panel - Inspection Area 3
STGR6RH
STGR7RH
STGR9RH
STGR11RH
STGR14RH
01
STGR18RH
STGR20RH
STGR23RH
STGR26RH
STGR32RH
B
VIEW FROM OUTSIDE
INSPECTION INSPECTION
REFERENCE INSTRUCTIONS
NOTE:
01 THIS WINDOW IS A CUSTOMER OPTION.
N_SR_534111_3_6EEM000B_01_00
Figure 003 / 53-41-11-205-136 (SHEET 2/2) - Lateral Skin Panel - Inspection Area 3