Professional Documents
Culture Documents
207929398 Standard ProductsWater Treatment 20-09-13 Compressed 142 179
207929398 Standard ProductsWater Treatment 20-09-13 Compressed 142 179
207929398 Standard ProductsWater Treatment 20-09-13 Compressed 142 179
Veolia Water Solutions & Technologies works in partnership with its customers to
ensure the optimal running of their water treatment facilities.
Veolia Water Solutions & Technologies offers a wide range of consumables and spare
parts.
Cartridge filters
Reverse osmosis membranes
Ion exchange resins
Activated carbon and other filtration media
CEDI stacks
Valves
Instrumentation
Dosing systems
UV systems
Test kits, etc.
Related Services
Local after-sales service and support
teams offer preventative and
corrective maintenance programs
to ensure the long-term, efficient
Performance operation of installed plant.
200 3
Differential Pressure (mbar)
100
0 0
0 2 4 6
Performance
Chlorine Reduction per 10" based on 2 ppm Inlet Concentration 22700 litres @ 3.8 l/min (6000 gallons @ 1 gpm)
Dimensions
Outside Diameter 2.7"
Inside Diameter 1.1"
Ordering Information
Length Micron End Fiting Part Number
9" 3/4 10 DOE CFCBYS9 510
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Carb/AQF113_EN_V1.2
400 6
Differential Pressure (mbar)
200
0 0
0 2 4 6
Performance
Chlorine Reduction per 10" based on 2ppm inlet Concentration 76000 litres @ 3.8 l/min (20000 gallons @ 1 gpm)
Dimensions
Outside Diameter 2.7"
Inside Diameter 1.1"
Ordering Information
Length Micron End Fiting Part Number
9" 3/4 1 DOE CFCBYS9 511
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Carb-HP/AQF114_EN_V1.2
Performance
200 3
m
1μ
Differential Pressure (mbar)
m 2
5μ
100 m
10 μ
m
25 μ 1
0 0
0 10 20 30
Dimensions
Outside Diameter 2.7" (68 mm)
Ordering Information
Length Micron End Fiting Part Number Length Micron End Fiting Part Number
DOE CFYKYS9 410 DOE CFYKZE9 411
1 CODE 7 CFYKYS9 450 1 CODE 7 CFYKZE9 451
CODE 3 CFYKYS9 440 CODE 3 CFYKZE9 441
DOE CFYOYS9 411 DOE CFYOZE9 411
5 CODE 7 CFYOYS9 450 5 CODE 7 CFYOZE9 452
CODE 3 CFYOYS9 440 CODE 3 CFYOZE9 441
9" 3/4 30"
DOE CFYTYS9 410 DOE CFYTZE9 410
10 CODE 7 CFYTYS9 450 10 CODE 7 CFYTZE9 450
CODE 3 CFYTYS9 440 CODE 3 CFYTZE9 440
DOE CFZDYS9 410 DOE CFZDZE9 410
25 CODE 7 CFZDYT9 450 25 CODE 7 CFZDZE9 450
CODE 3 CFZDYS9 440 CODE 3 CFZDZE9 440
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Pleat/AQF115_EN_V1.1
Performance
Absolute rating from 0.6 to 40 μm
(> 99.99% retention at micron
rating) 100
μm
0.6
Differential Pressure (mbar)
μm
1.2 1
50
5 μm
0 0
0 10 20
Dimensions
Outside Diameter 2.7" (68 mm)
Ordering Information
Material Specification Micron End Fiting Part Number
DOE CFYGYT9 410
0.6 CODE 7 CFYGYT9 450
CODE 3 CFYGYT9 440
DOE CFYKYT9 410
1.2 CODE 7 CFYKYT9 451
CODE 3 CFYKYT9 440
10" DOE CFYOYT9 410
CODE 7 CFYOYT9 450
5
CODE 3 CFYOYT9 440
CODE 9 CFYOYT30 0 6 8 2
10 CODE 9 CFYTYT30 0 6 8 3
25 CODE 9 CFZDYT30 0 6 8 4
40 CODE 9 CFZFYT30 0 6 8 5
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Pleat-HP/AQF116_EN_V1.4
Performance
100
m m
1μ 5μ
m
10 μ
Differential Pressure (mbar)
75
50 20 μm
50 μm
25
0
0 20
Dimensions
Outside Diameter 2.5"
Inside Diameter 1.1"
Ordering Information
Length Micron End Fiting Part Number Length Micron End Fiting Part Number
DOE CFYKYS9300 DOE CFYKZE9300
1 CODE 8 CFYKYS9370 1 CODE 8 CFYKZE9370
CODE 3 CFYKYS9341 CODE 3 CFYKZE9341
DOE CFYOYS9300 DOE CFYOZE9300
5 CODE 8 CFYOYS9370 5 CODE 8 CFYOZE9370
CODE 3 CFYOYS9341 CODE 3 CFYOZE9342
9" 3/4 DOE CFYTYS930 0 30" DOE CFYTZE930 1
10 CODE 8 CFYTYS9370 10 CODE 8 CFYTZE9370
CODE 3 CFYTYS9341 CODE 3 CFYTZE9341
DOE CFZDYS9300 DOE CFZDZE9300
20 CODE 8 CFZDYS9370 20 CODE 8 CFZDZE9370
CODE 3 CFZDYS9341 CODE 3 CFZDZE9340
50 DOE CFZGYS9300 50 DOE CFZGZE9300
DOE CFYKZF9300
1 CODE 8 CFYKZF9370
CODE 3 CFYKZF9341
DOE CFYOZF9300
DOE CFYKZD9300 5 CODE 8 CFYOZF9370
1 CODE 8 CFYKZD9370 CODE 3 CFYOZF9341
CODE 3 CFYKZD9341 40" DOE CFYTZF930 0
DOE CFYOZD9300 10 CODE 8 CFYTZF9370
5 CODE 8 CFYOZD9370 CODE 3 CFYTZF9341
CODE 3 CFYOZD9341 DOE CFZDZF9300
20" DOE CFYTZD930 0 20 CODE 8 CFZDZF9370
10 CODE 8 CFYTZD9370 CODE 3 CFZDZF9340
CODE 3 CFYTZD9341 50 DOE CFZGZF9300
DOE CFZDZD9300 1 DOE CFYKZG9300
20 CODE 8 CFZDZD9370 5 DOE CFYOZG930 0
50"
CODE 3 CFZDZD9340 20 DOE CFZDZG9300
50 DOE CFZGZD9300 50 DOE CFZGZG9300
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Spun/AQF117_EN_V1.2
Performance
7
m
1μ
400 6
Differential Pressure (mbar)
5
300
4
200 3
5 μm
2
100
10 μm
1
0 0
0 8 16
FILOTM Spun-HP can be repeatedly (up to 25 times) steam sterilised in situ or autoclaved up to 130°C
Cleaning and Sterilisation (266°F). FILOTM Spun-HP filters can be sanitised with hot water at up to 90°C (400 hours in 20 minutes
cycles) and are compatible with a wide range of chemicals.
Dimensions
Outside Diameter 2.5"
Inside Diameter 1.1"
Ordering Information
Length Micron End Fiting Part Number Length Micron End Fiting Part Number
DOE CFYFYS9310 DOE CFYFZE9310
0.5 CODE 3 CFYFYS9340 0.5 CODE 3 CFYFZE9340
CODE 7 CFYFYS9350 CODE 7 CFYFZE9350
DOE CFYKYS9310 DOE CFYKZE9310
1 CODE 3 CFYKYS9340 1 CODE 3 CFYKZE9340
CODE 7 CFYKYS9350 CODE 7 CFYKZE9350
30"
DOE CFYOYS9310 DOE CFYOZE9310
9" 3/4 5 CODE 3 CFYOYS9340 5 CODE 3 CFYOZE9341
CODE 7 CFYOYS9350 CODE 7 CFYOZE9350
DOE CFYTYS9310 DOE CFYTZE9310
10 CODE 3 CFYTYS9340 10 CODE 3 CFYTZE9340
CODE 7 CFYTYS9350 CODE 7 CFYTZE9350
DOE CFZDYS9310
20 CODE 3 CFZDYS9340
CODE 7 CFZDYS9350
DOE CFYFZD9310 DOE CFYFZF9310
0.5 CODE 3 CFYFZD9340 0.5 CODE 3 CFYFZF9340
CODE 7 CFYFZD9350 CODE 7 CFYFZF9350
DOE CFYKZD9310 DOE CFYKZF9310
1 CODE 3 CFYKZD9340 1 CODE 3 CFYKZF9340
CODE 7 CFYKZD9350 CODE 7 CFYKZF9350
20" 40"
DOE CFYOZD9310 DOE CFYOZF9310
5 CODE 3 CFYOZD9340 5 CODE 3 CFYOZF9340
CODE 7 CFYOZD9350 CODE 7 CFYOZF9350
DOE CFYTZD9310 DOE CFYTZF9310
10 CODE 3 CFYTZD9340 10 CODE 3 CFYTZF9340
CODE 7 CFYTZD9350 CODE 7 CFYTZF9350
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Spun-HP/AQF118_EN_V1.3
Performance
μm
μm
μ
45
0.2
0.1
100
0.
Differential Pressure (psid)
Differential Pressure (mbar)
50
0 10 l/min 20 l/min
Cleaning and Sanitisation FILOTM Mem cartridge can be autoclaved up to 10 times up to 130°C or steam sterilised up to 130°C
Ordering Information
FILOTM Mem-P (Pharmaceutical applications) FILOTM Mem-E (Electronic applications)
Length Micron End Fiting Part Number Length Micron End Fiting Part Number
DOE CFYCYT9410 DOE CFYBYT9 410
CODE 3 CFYCYT9 440 0.1 CODE 3 CFYBYT9 440
0.2
CODE 7 CFYCYT9 451 CODE 7 CFYBYT9 450
10"
CODE 9 CFYCYT9 46 0 DOE CFYCYT9 411
10"
DOE CFYEYT9 410 0.2 CODE 3 CFYCYT9 441
CODE 3 CFYEYT9 440 CODE 7 CFYCYT9 452
0.45
CODE 7 CFYEYT9 450
CODE 9 CFYEYT9 46 0 DOE CFYBZD9 410
0.1 CODE 3 CFYBZD9 444
DOE CFYCZD9410 CODE 7 CFYBZD9 450
20"
CODE 3 CFYCZD9 440 DOE CFYCZD9 411
0.2
CODE 7 CFYCZD9 451 0.2 CODE 3 CFYCZD9 441
CODE 9 CFYCZD9 46 0 CODE 7 CFYCZD9 452
20"
DOE CFYEZD9 410
CODE 3 CFYEZD9 440 DOE CFYBZE9 410
0.45
CODE 7 CFYEZD9 450 0.1 CODE 3 CFYBZE9 440
CODE 9 CFYEZD9 46 0 CODE 7 CFYBZE9 450
30"
DOE CFYCZE9 411
DOE CFYCZE9 410 0.2 CODE 3 CFYCZE9 441
CODE 3 CFYCZE9 440 CODE 7 CFYCZE9 451
0.2
CODE 7 CFYCZE9 450
CODE 9 CFYCZE9 46 0
30"
DOE CFYEZE9 411
CODE 3 CFYEZE9 440
0.45
CODE 7 CFYEZE9 450
CODE 9 CFYEZE9 46 0
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /FILOTM Mem/AQF119_EN_V1.3
Part Number Nominal Area Permeate Flow Rate Minimum Salt Rejection
m² m3/d (usgpd) (%)
Maximum Feed Flow Dimensions inches (mm) Weight. Permeate tube length
Part Number inches (mm)
m3/hr (usgpm) kg (lbs)
A B C
MBROYL0700 1.4 (6) 21 (533) 2.4 (61) 0.75 (19.1) 0.9 (2) 1.2 (30.5)
Type
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide/Polysulphone
Test Conditions
500 ppm NaCl solution, 7 bar (100 psi), 25°C, pH 6 – 7, Permeate Recovery 10%.
Operating Limits*
Maximum Applied Pressure: 21 bar (300 psig)
A
Maximum Free Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 45°C
Feedwater pH Range: 3.0 – 10.0 Feed B
Maximum Feedwater Turbidity: 1.0 NTU Permeate
*Operating limits are for information only, actual operating conditions should be optimised to ensure best performance and
membrane life.
Notice: Minimum permeate flow for individual elements 15 % below listed flow. All membrane elements are supplied with a brine seal and o-rings. Elements are vacuum
sealed in a polyethylene bag containing less than 1.0% sodium metabisulphite and 10% propylene glycol solution and then packaged in a cardboard box.
Veolia Water Solutions & Technologies accept no responsibility for results obtained
by the application of this information or the safety or suitability of our products,
either alone or in combination with other products. Users are advised to make their
own tests to determine the safety and suitability of each product combination for
their own purposes.
Part Number Nominal Area Permeate Flow Rate Minimum Salt Rejection
m² m3/d (usgpd) (%)
Maximum Feed Flow Dimensions inches (mm) Weight. Permeate tube length
Part Number inches (mm)
m3/hr (usgpm) kg (lbs)
A B C
MBROYN0700 2.7 (12) 21 (533) 3.95 (100) 0.75 (19.1) 1.8 (4) 1.2 (30.5)
Type
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide/Polysulphone
Test Conditions
500 ppm NaCl solution, 7 bar (100 psi), 25°C, pH 6 – 7, Permeate Recovery 10%.
Operating Limits*
Maximum Applied Pressure: 21 bar (300 psig)
A
Maximum Free Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 45°C
Feedwater pH Range: 3.0 – 10.0 Feed B
Maximum Feedwater Turbidity: 1.0 NTU Permeate
*Operating limits are for information only, actual operating conditions should be optimised to ensure best performance and
membrane life.
Notice: Minimum permeate flow for individual elements 15 % below listed flow. All membrane elements are supplied with a brine seal and o-rings. Elements are vacuum
sealed in a polyethylene bag containing less than 1.0% sodium metabisulphite and 10% propylene glycol solution and then packaged in a cardboard box.
Veolia Water Solutions & Technologies accept no responsibility for results obtained
by the application of this information or the safety or suitability of our products,
either alone or in combination with other products. Users are advised to make their
own tests to determine the safety and suitability of each product combination for
their own purposes.
Maximum Feed Flow Dimensions inches (mm) Weight. Permeate tube length
Part Number inches (mm)
m3/hr (usgpm) kg (lbs)
A B C
MBROYN0704 3.6 (16) 40 (1016) 3.95 (100) 0.75 (19.1) 3.6 (8) 1.05 (26.7)
Type
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide/Polysulphone
Test Conditions
500 ppm NaCl solution, 7 bar (100 psi), 25°C, pH 6 – 7, Permeate Recovery 15%.
Operating Limits*
Maximum Applied Pressure: 42 bar (600 psig)
A
Maximum Free Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 45°C
Feedwater pH Range: 3.0 – 10.0 Feed B
Maximum Feedwater Turbidity: 1.0 NTU Permeate
*Operating limits are for information only, actual operating conditions should be optimised to ensure best performance and
membrane life.
Notice: Minimum permeate flow for individual elements 15 % below listed flow. All membrane elements are supplied with a brine seal and o-rings. Elements are vacuum
sealed in a polyethylene bag containing less than 1.0% sodium metabisulphite and 10% propylene glycol solution and then packaged in a cardboard box.
Veolia Water Solutions & Technologies accept no responsibility for results obtained
by the application of this information or the safety or suitability of our products,
either alone or in combination with other products. Users are advised to make their
own tests to determine the safety and suitability of each product combination for
their own purposes.
Type
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide/Polysulphone
Test Conditions
1500 ppm NaCl solution, 10.5 bar (150 psi), 25°C, pH 6 – 7, Permeate Recovery 15%.
Operating Limits*
Maximum Applied Pressure: 42 bar (600 psig)
A
Maximum Free Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 45°C
Feedwater pH Range: 3.0 – 10.0 Feed B
Maximum Feedwater Turbidity: 1.0 NTU Permeate
*Operating limits are for information only, actual operating conditions should be optimised to ensure best performance and
membrane life.
Notice: Minimum permeate flow for individual elements 15 % below listed flow. All membrane elements are supplied with a brine seal and o-rings. Elements are vacuum
sealed in a polyethylene bag containing less than 1.0% sodium metabisulphite and 10% propylene glycol solution and then packaged in a cardboard box.
Veolia Water Solutions & Technologies accept no responsibility for results obtained
by the application of this information or the safety or suitability of our products,
either alone or in combination with other products. Users are advised to make their
own tests to determine the safety and suitability of each product combination for
their own purposes.
Type
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide/Polysulphone
Test Conditions
1500 ppm NaCl solution, 10.5 bar (150 psi), 25°C, pH 6 – 7, Permeate Recovery 15%.
Operating Limits*
Maximum Applied Pressure: 42 bar (600 psig)
A
Maximum Free Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 45°C
Feedwater pH Range: 3.0 – 10.0 Feed B
Maximum Feedwater Turbidity: 1.0 NTU Permeate
*Operating limits are for information only, actual operating conditions should be optimised to ensure best performance and
membrane life.
Notice: Minimum permeate flow for individual elements 15 % below listed flow. All membrane elements are supplied with a brine seal and o-rings. Elements are vacuum
sealed in a polyethylene bag containing less than 1.0% sodium metabisulphite and 10% propylene glycol solution and then packaged in a cardboard box.
Veolia Water Solutions & Technologies accept no responsibility for results obtained
by the application of this information or the safety or suitability of our products,
either alone or in combination with other products. Users are advised to make their
own tests to determine the safety and suitability of each product combination for
their own purposes.
Specifications
Power supply 230 V or 24 V ± 10 % ; 50 - 60 Hz
Power consumption max. 30 VA
Degree of protection IP 65
Protection class I ; CE
Ambient temperature 10 - 45 °C
Water temperature 10 - 40 °C
Operating pressure 0.1 - 8 bar ; 10 4 - 8 x 10 5 Pa
Dimensions (W x H x D) 380 x 480 x 280 mm
Weight approx. 10.5 kg
Ordering Information
Model Measuring Parameter Part Number
VWS Monitor KH Carbonate Hardness IEPOHR30 10 8 7
VWS Monitor CLF Free Chlorine IEPOGU30 10 9 2
VWS Monitor CLT Total Chlorine IEPOGU30 10 9 1
VWS Monitor DUO Carbonate Hardness + Hardness IEPOGU30 10 8 9
VWS Monitor THCL Hardness + Total Chlorine IEPOGU30 10 9 0
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /VWS Monitor/AQF122_EN_V1.1
Specifications
Ordering Information
Model Measuring parameter Part Number
VWS Monitor TH Hardness IEPOHR30 10 8 8
In keeping with the progressive nature of the company, we reserve the right to amend details without notice.
VWS CATALOGUE /VWS Monitor/AQF121_EN_V1.1