Professional Documents
Culture Documents
Regulator 5A-12A
Regulator 5A-12A
Item Description
Description:
5A step-down module
5A CNC step-down module (constant voltage constant
current, liquid crystal display, with crystal shell)
note! ! ! Delivery with accessories, you need to own
assembly; module for the DC / DC Buck module, can not
enter the transformer directly step down the AC power; to
charge the battery, ensure that the module output first power
and then connect the battery, the battery is full, first pull
Battery, the last module power off, to prevent the battery
voltage backflow (preferably at the output of the module is
connected to a large current diode can prevent backflow).
1. Product Highlights
1.1. Plexiglass outer shell, beautiful design and generous,
key touch texture is good, press the button to set the output
voltage, eliminating the need to use a knife;
1.2. The button can control the output to turn off and on, and
can set the product power-on default is ON or OFF;
1.3. LCD can display input and output voltage, output
current, output power;
1.4. Input reverse polarity protection, reverse connection will
not burn;
1.5. High efficiency over 93%, large current, small heat,
output voltage 1.2-32V arbitrary regulation, constant current
value of about 0-4.5A adjustment, suitable for office power,
high-power LED constant current drive, lithium battery
charging and so on!
2. Product parameters
Input voltage: 6.5-36V (input voltage less than 6.5V, current
is not accurate, less than 5.5V, LCD display is not normal)
Output voltage: 1.2-32V, factory default output 5V.
Output current: Can work stably at 3.5A for a long time, and
can reach about 4.5A under enhanced heat dissipation
(adjustable limit current is about 4.2-4.5A)
Output power: natural heat dissipation 50W (less than 3.5A),
enhanced heat dissipation 75W
Voltage display: resolution 0.05V, range 1.2-32V, accuracy
of about ± 0.1V (accuracy demanding carefully shot!)
Current display: resolution 0.005A, range 0-4.5A, accuracy
±0.05A (precision for those who require strict accuracy!)
Conversion efficiency: about 94%
Working current: about 30mA
Reverse input protection: Yes
Anti-backflow at the output end: None (If the battery is
charged, first power on the module and then connect the
battery, and ensure that the battery voltage is lower than the
output voltage; if the condition is required, connect the anti-
backup diode to the positive side of the output string)
Short circuit protection: Yes
Size: length * width * height 70.5*48.4*28mm
Weight: 62g
3. Function description
3.1. There are two buttons on the left side of the module:
IN/OUT, ON/OFF: IN/OUT button to switch the input voltage
and output voltage display, long press to switch the output
current and output power display; ON/OFF button control
output ON or OFF, Long press to set the next time the
default output state is ON or OFF.
The right side of the module has two buttons: '+' and '-'.
Press the '+' button to increase the output voltage by 0.05V.
Press and hold it to increase it continuously. Press and hold
it again for a continuous slow step increase of 0.1V and 1V.
'-' button, the output voltage is reduced by 0.05V, long press
can continue to reduce, and then long press to reduce the
step by 0.1V and 1V.
3.2. ADJ-I is a current setting potentiometer, clockwise
rotation, can increase the set current, when the load current
reaches the set current, enter the constant current state, CC
constant current indicator (red) lights up. The ON indicator is
the output status indicator. It is on when the output has a
voltage, otherwise it is off. The CHAR indicator is the
charging indicator. When charging, it is on. The FULL
indicator is full. If the set constant current value is 2A, the
charging When the current reaches 0.2A or less, turn on the
lamp, the FULL lamp is on, and the CHAR lamp is off.
4. How to use
4.1. Use as an ordinary buck module with overcurrent
protection capability
(1) Press the key to set the output voltage to your desired
voltage.
(2) Turn the ADJ-I current adjustment potentiometer
counterclockwise first, then measure the output short-circuit
current with the multimeter 10A current range (directly
connect the two test leads to the output), and adjust the
ADJ-I constant current potentiometer clockwise to make the
output The current reaches the overcurrent protection value
you want to set. (For example, the current value displayed
by the multimeter is 2A, then when you use the module, the
maximum current can only reach 2A. When the current
reaches 2A, the red constant current indicator is on,
otherwise the indicator is off)
4.2. Use as a Battery Charger
A module without a constant current function cannot be
used to charge the battery. Due to the large voltage
difference between the battery and the charger when the
battery is exhausted, the charging current is too large and
the battery is damaged. So when you start, you need to
charge the battery with a constant current, and when it is
charged to a certain degree, it automatically switches back
to constant voltage charging.
(1)Make sure you need the float charge voltage and charge
current of the rechargeable battery; (if the lithium battery
parameter is 3.7V/2200mAh, then the float voltage is 4.2V,
the maximum charge current is 1C, ie 2200mA)
(2) Under no-load conditions, press the button to adjust the
output voltage to reach the float voltage; (If charging the
3.7V lithium battery, adjust the output voltage to 4.2V)
(3) Turn the ADJ-I current adjustment potentiometer
counterclockwise first, then measure the output short circuit
current with the multimeter's 10A current range (directly
connect the two test leads to the output terminal) and adjust
the ADJ-I constant current potentiometer clockwise. Make
the output current reach the predetermined charging current
value;
(4) Connect the battery and charge it.
(When setting steps 1, 2, and 3: The output terminal is
empty and no battery is connected)
4.3. Use as a High Power LED Constant Current Drive
Module
(1) Make sure that you need to drive the LED's operating
current and maximum operating voltage;
(2) Under no-load conditions, press the key to set the output
voltage to the maximum LED operating voltage;
(3) Turn the ADJ-I current adjustment potentiometer
counterclockwise first, then measure the output short circuit
current with the multimeter's 10A current range (directly
connect the two test leads to the output terminal) and adjust
the ADJ-I constant current potentiometer clockwise. Make
the output current reach the predetermined LED operating
current;
(4) Connect the LED, test machine.
(When setting steps 1, 2, and 3: Output no-load LED light.)
5. Note
5.1. The module input 'IN-' must not be shorted to the output
'OUT-', otherwise the constant current function will fail.
5.2. Please ensure that the power supply power is greater
than the power required by the output load. When the
module is hot, reduce the power usage!
5.3. Please read the product description carefully before
use. Any damage caused by improper use will not be
compensated.