Professional Documents
Culture Documents
Service_Manual_Technical_Specifications_Vehicle_Except_Spark
Service_Manual_Technical_Specifications_Vehicle_Except_Spark
Service_Manual_Technical_Specifications_Vehicle_Except_Spark
WARNING
Read this Manual thoroughly. It contains important safety information. Minimum recommended
operators age: 16 years old. Keep this Operators Manual in the boat.
CALIFORNIA PROPOSITION 65 WARNING
WARNING
This product contains or emits chemicals know to the state of California to cause cancer and
birth defects or other reproductive harm.
All rights reserved. No parts of this Manual may be reproduced in any form without the prior written per-
mission of Bombardier Recreational Products Inc.
©Bombardier Recreational Products Inc. (BRP) 2024
01 T E C H N I C A L S P E C I F I C A T I O N S .............................................................................................. 1
V E H I C L E . . . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . .. . . .. . .. . . .. . .. . . .. . .. . . . 2
GTI, GTR AND WAKE 170 ...................................................................................................... 2
EXPLORER PRO..................................................................................................................... 4
FISHPRO SCOUT 130............................................................................................................. 6
FISHPRO SPORT 170 AND TROPHY 170............................................................................. 9
GTX PRO 130 ........................................................................................................................ 11
GTX AND WAKE PRO........................................................................................................... 14
RXT-X..................................................................................................................................... 16
RXP-X .................................................................................................................................... 19
III
01
TECHNICAL SPECIFICATIONS
1
Technical Specifications
Vehicle
01 Technical Specifications
Vehicle
GTI, GTR and Wake 170
Cooling System
Type Closed-loop cooling system (CLCS)
Recommended XPS Extended life pre-mixed coolant
Use a low silicate, extended life
ethylene-glycol premixed coolant
Alternative, or if not (50%-50%) specifically formulated for
Coolant available internal combustion aluminum
engines.
5.4 l
Capacity
(5.7 qt(liq.,US))
Fuel System
Fuel pump In-tank electrical
Regular unleaded
Type
Refer to Fuel Requirements
Fuel 87 Pump Posted AKI (RON+MON)/2
Octane rating or
91 (RON) E10
Full 70 l (18.5 gal(liq. US))
Electrical System
Batter 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
2
Technical Specifications
Vehicle
F6 Charge 30 A
F7 Cluster 5A
F9 iBR 30 A
F10 Start/ Stop 5A
Fuses
F11 ECM 5A
F12 Battery 30 A
Diagnostic
Connector (6),
F13 Accessory 15 A
connector (2)
Diagnostic
Connector (5),
F14 Accessory 15 A
connector (1)
Relay RY1 Main —
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
3
Technical Specifications
Vehicle
Dimensions
331.8 cm
Overall length
(130.6 in)
125 cm
Overall width (49.2 in)
113.7 cm
Overall height
(44.8 in)
110 cm
Overall height (GTR-X 300 Only)
(43.4 in)
N O T E : BRP reserves the right to make changes in design and specifications and/or to make additions
to, or improvements in its products without imposing any obligation upon itself to install them on its prod-
ucts previously manufactured.
EXPLORER PRO
BRP reserves the right to make changes in design and specifications and/or to make additions to, or im-
provements in its products without imposing any obligation upon itself to install them on its products pre-
viously manufactured.
4
Technical Specifications
Vehicle
Cooling System
Type Closed-loop cooling system (CLCS)
01
Recommended XPS coolant XPS Extended life pre-mixed coolant
Use a low silicate, extended life
ethylene-glycol premixed coolant
If XPS product is not (50%-50%) specifically formulated
Coolant available for internal combustion aluminum
engines.
5.4 l
Capacity
(5.7 qt (liq.,US))
Fuel System
Fuel pump In-tank electrical
Fuel Regular unleaded
Type
Refer to Fuel Requirements
87 Pump Posted AKI (RON+MON)/2
Octane rating or
91 (RON) E10
60 l
Full (15.9 gal (liq. US))
Tank capacity Reserve
14 l
(from low level signal -
(3.7 gal (liq. US))
approx.)
Battery 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
Fuses Fuel Inj., Ign. Coils and Fuel
F2 Pump 15 A
5
Technical Specifications
Vehicle
Propulsion
Propulsion system Sea-Doo® jet pump
Jet pump Axial flow, single stage.
Type Large hub with double row ball
bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
Dimensions
373.4 cm
Overall length
(146.8 in)
125.5 cm
Overall width (49.4 in)
120 cm
Overall height
(55.5 cm)
6
Technical Specifications
Vehicle
Fuel System
Fuel pump In-tank electrical
Regular unleaded
Type
Refer to Fuel Requirements
Fuel 87 Pump Posted AKI (RON+MON)/2
Octane rating or
91 (RON) E10
Full 70 l (18.5 gal(liq. US))
Electrical System
Battery 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
7
Technical Specifications
Vehicle
F6 Charge 30 A
F7 Cluster 5A
F9 iBR 30 A
F10 Start/ Stop 5A
Fuses
F11 ECM 5A
F12 Battery 30 A
Diagnostic
Connector (6),
F13 Accessory 15 A
connector (2)
Diagnostic
Connector (5),
F14 Accessory 15 A
connector (1)
Relay RY1 Main —
Recommended BRP Extended life pre-mixed coolant
Use a low silicate, extended life
Alternate oil if XPS ethylene glycol premixed coolant
products are not (50%-50%) specifically formulated for
Transducer Liquid
available internal combustion aluminium
engines
135 ml
Capacity
(4.6 fl oz(US))
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
8
Technical Specifications
Vehicle
Dimensions
331.8 cm
Overall length
(130.6 in)
125 cm
Overall width (49.2 in)
117 cm
Overall height
(46.1 in)
N O T E : BRP reserves the right to make changes in design and specifications and/or to make additions
to, or improvements in its products without imposing any obligation upon itself to install them on its prod-
ucts previously manufactured.
Fuel System
Fuel pump In-tank electrical
Regular unleaded
Type
Refer to Fuel Requirements
Fuel 87 Pump Posted AKI (RON+MON)/2
Octane rating or
91 (RON) E10
9
Technical Specifications
Vehicle
Electrical System
Sport 12 V, 18 Ah
Battery
Trophy 2 X 12 V, 18 Ah
Sport 420 W @ 6000 RPM
Total system output
Trophy 650 W @ 6000 RPM
Fuel Inj., Ign. Coils
F2 and Fuel Pump 15 A
F3 Bilge pump 3A
Livewell pump (if
F4 equipped) 4A
F7 Cluster 5A
F9 iBR 30 A
Fuses
F10 Start/ Stop 5A
F11 ECM 5A
F12 Battery 30 A
F13 Diagnostic Tool 2 15 A
F14 Diagnostic Tool 1 15 A
Fuse Holder Transducer 3A
RY1 Main —
Relay
RY2 Livewell pump —
Recommended BRP Extended life pre-mixed coolant
Use a low silicate, extended life
Alternate oil if XPS ethylene glycol premixed coolant
products are not (50%-50%) specifically formulated for
Transducer Liquid
available internal combustion aluminium
engines
135 ml
Capacity
(4.6 fl oz(US))
Propulsion
Propulsion system Sea-Doo® jet pump
10
Technical Specifications
Vehicle
Dimensions
373.4 cm
Overall length
(147 in)
125.5 cm
Overall width (49.4 in)
115.1 cm
Overall height
(45.3 in)
N O T E : BRP reserves the right to make changes in design and specifications and/or to make additions
to, or improvements in its products without imposing any obligation upon itself to install them on its prod-
ucts previously manufactured.
11
Technical Specifications
Vehicle
Fuel System
Fuel pump In-tank electrical
Regular unleaded
Type
Refer to Fuel Requirements
Fuel 87 Pump Posted AKI (RON+MON)/2
Octane rating or
91 (RON) E10
Full 70 l (18.5 gal(liq. US))
Electrical System
Batter 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
12
Technical Specifications
Vehicle
F6 Charge 30 A
F7 Cluster 5A
F9 iBR 30 A
F10 Start/ Stop 5A
Fuses
F11 ECM 5A
F12 Battery 30 A
Diagnostic
Connector (6),
F13 Accessory 15 A
connector (2)
Diagnostic
Connector (5),
F14 Accessory 15 A
connector (1)
Relay RY1 Main —
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
13
Technical Specifications
Vehicle
Dimensions
Overall length 345.1 cm (135.9 in)
N O T E : BRP reserves the right to make changes in design and specifications and/or to make additions
to, or improvements in its products without imposing any obligation upon itself to install them on its prod-
ucts previously manufactured.
Cooling System
Type Closed-loop cooling system (CLCS)
Recommended XPS Extended life pre-mixed coolant
Use a low silicate, extended life
ethylene-glycol premixed coolant
Alternative, or if not (50%-50%) specifically formulated for
Coolant available internal combustion aluminum
engines.
5.4 l
Capacity
(5.7 qt(liq.,US))
Fuel System
Fuel pump In-tank electrical
Rotax 1630 ACE -
170 Regular unleaded
Rotax 1630 ACE - Refer to Fuel Requirements
Type 230
Rotax 1630 ACE - Premium unleaded
300 Refer to Fuel Requirements
Fuel Rotax 1630 ACE - 87 Pump Posted AKI (RON+MON)/2
170 or
Rotax 1630 ACE - 91 (RON) E10
Octane rating 230
91 Pump Posted AKI (RON+MON)/2
Rotax 1630 ACE - or
300 95 (RON) E10
70 l
Full (18.5 gal(liq. US))
Tank capacity Reserve
14 l
(from low level signal
(3.7 gal(liq. US))
- approx.)
14
Technical Specifications
Vehicle
Electrical System
Battery 12 V, 18 Ah
01
Total system output 420 W @ 6000 RPM
Fuel Inj., Ign. Coils
F2 and Fuel Pump 15 A
F6 Charge 30 A
F7 Cluster 5A
F9 iBR 30 A
F10 Start/ Stop 5A
Fuses
F11 ECM 5A
F12 Battery 30 A
Diagnostic
Connector (6),
F13 Accessory 15 A
connector (2)
Diagnostic
Connector (5),
F14 Accessory 15 A
connector (1)
Relay RY1 Main —
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
15
Technical Specifications
Vehicle
Dimensions
345.1 cm
Overall length
(135.9 in)
125.5 cm
Overall width (49.4 in)
113.8 cm
Overall height
(44.8 in)
RXT-X
BRP reserves the right to make changes in design and specifications and/or to make additions to, or im-
provements in its products without imposing any obligation upon itself to install them on its products pre-
viously manufactured.
Cooling System
Type Closed-loop cooling system (CLCS)
16
Technical Specifications
Vehicle
Fuel System
Fuel pump In-tank electrical
Premium unleaded
Type
Refer to Fuel Requirements
Fuel 91 Pump Posted AKI (RON+MON)/2
Octane rating or
95 (RON) E10
Full 70 l (18.5 gal (liq. US))
Electrical System
Battery 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
17
Technical Specifications
Vehicle
F2 Inj. 15 A
F3 Bilge 3A
F4 Fuel pumps 15 A
F5 O2 Sensors 3A
F6 Charge 30 A
F7 Cluster 5A
Depth sounder (If
F8 equipped) 3A
Fuses
F9 iBR 30 A
F10 Start/ Stop 5A
F11 ECM 5A
F12 Battery 30 A
F13 Diagnostic Tool 1, 15 A
Diagnostic Tool 2,
F14 Accessory 15 A
connector
Relay RY1 Main —
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
18
Technical Specifications
Vehicle
Dimensions
345.1 cm
01
Overall length
(135.9 in)
125.5 cm
Overall width (49.4 in)
114.7 cm
Overall height (steering in low position)
(45.2 in)
RXP-X
Cooling System
Type Closed-loop cooling system (CLCS)
Recommended XPS Extended life pre-mixed coolant
Use a low silicate, extended life
ethylene-glycol premixed coolant
Alternative, or if not (50%-50%) specifically formulated for
Coolant available internal combustion aluminum
engines.
5.4 l
Capacity
(5.7 qt (liq.,US))
Fuel System
Fuel pump In-tank electrical
Premium unleaded
Type
Refer to Fuel Requirements
Fuel 91 Pump Posted AKI (RON+MON)/2
Octane rating or
95 (RON) E10
Full 70 l (18.5 gal (liq. US))
Electrical System
Battery 12 V, 18 Ah
Total system output 420 W @ 6000 RPM
19
Technical Specifications
Vehicle
F2 Inj. 15 A
F3 Bilge 3A
F4 Fuel pumps 15 A
F5 O2 Sensors 3A
F6 Charge 30 A
F7 Cluster 5A
Depth sounder (If
F8 equipped) 3A
Fuses
F9 iBR 30 A
F10 Start/ Stop 5A
F11 ECM 5A
F12 Battery 30 A
F13 Diagnostic Tool 1, 15 A
Diagnostic Tool 2,
F14 Accessory 15 A
connector
Relay RY1 Main —
Propulsion
Propulsion system Sea-Doo® jet pump
Axial flow, single stage.
Type Large hub with double row ball
Jet pump bearings
Material Aluminum
Impeller Stainless steel
Transmission Type Direct drive
20
Technical Specifications
Vehicle
Dimensions
331.8 cm
Overall length
(130.6 in)
125 cm
Overall width (49.2 in)
111cm
Overall height (steering in low position)
(44 in)
N O T E : BRP reserves the right to make changes in design and specifications and/or to make additions
to, or improvements in its products without imposing any obligation upon itself to install them on its prod-
ucts previously manufactured.
21
WARNING
Disregarding any of the safety precautions and instructions contained in the Operators’s Guide,
SAFETY VIDEO and on product safety labels could cause injury including the possibility of
death.
www.brp.com
SKI-DOO® SEA-DOO® CAN-AM®
LYNX® EVINRUDE® ROTAX®