DDMC802 Data Sheet Rev L

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DDMC802

Dimming/Relay/HF Ballast
/Fan/Curtain Controller

The DDMC802 is an 8 channel controller with a maximum load per channel of 2A. A variety of output modules are available to
suit different types of loads and the DDMC802 can accept up to eight plug in modules, which by their removable design also
facilitate ease of servicing. Available module types include:
• Trailing edge phase control dimmer, suitable for use with most types of dimmable electronic transformers.
• Leading edge phase control dimmer, suitable for incandescent lamps and some types of dimmable electronic transformers.
• HF Ballast contoller, suitable for controlling 1-10V and digital ballasts and transformers (a relay module should be paired
with the HF ballast module when controlling 1-10V ballasts).
• Relay module, suitable for most types of switched loads.
• Fan control module.
• Curtain control module.
The device is DIN rail mountable, designed to be installed in a switchboard, optionally next to circuit breakers feeding the
circuits to be controlled.
Supply 1 x RS485 DyNet and DMX512 serial port
technical data 230V ±14% 50/60Hz Single Phase at 16A 1 x AUX programmable dry contact input

Outputs DyNet DC Supply


8 x output slots at 2A each. Maximum 120mA
device load 16A. A derating factor may
need to be applied if installed in a smaller Preset Scenes
sealed switchboard when using Leading 170
or Trailing edge modules, see Instruction
Manual for details. Some modules occupy User Controls
2 slots. Available modules include: Service Switch
DDBM100 - 1 Channel; 1-10V or digital HF Diagnostic LED
DDMC802-MO Ballast control. Occupies 1 slot
DDCM102 - 1 Channel x 2A SPDT Curtain Diagnostic Functions
Control. Occupies 2 slots Circuit run time tracking on each channel
DDFM102 - 1 Channel 400VA Fan Control. Device Online/Offline status
Occupies 2 slots
DDLM102 - 1 Channel x 2A Leading edge Supply Terminals
dimmer. Regulating Device - Triac - 20A, Line, Neutral, Earth
600V. Occupies 1 slot 2 x 2.5mm2 or 1 x 4mm2 conductor size
DDLM104 - 1 Channel x 4A Leading edge
dimmer. Regulating Device - Triac - 20A, Output Terminals
600V. Occupies 2 slots Line, Neutral for each channel,
DDRM104 - 1 Channel x 4A relay. 2 x 2.5mm2 or 1 x 4mm2 conductor size
Switching device - Relay, 16A TV5 100A
surge. Occupies 1 slot Operating Environment
DDTM102 - 1 Channel x 2A Trailing 0º to 40ºC ambient temperature
edge dimmer. Regulating Device - Dual 0% to 95% RH non condensing
MOSFET’s 20A, 600V, 62A surge.
Occupies 1 slot Compliance
CE, C-Tick
Dimmer Module Power Conditioning
• Regulated outputs Enclosure
• Over voltage protection Polycarbonate DIN Rail enclosure (12 unit)
• Surge protection
• Brownout/Sag protection Dimensions
• Spike protection H 93mm x W 211mm x D 75mm
• Soft start
• 16 bit fade resolution (65,535 steps) Weight
Packed weight 0.94kg
Front Panel Controls
Channel Override switches
Channel Status indicators
Service Switch
Service LED
RS485 DyNet port
Control Inputs

load compatability Digital and 1-10V HF Ballasts Leading edge electronic transformers
Digital and 1-10V transformers Switched loads
Incandescent lamps Trailing edge electronic transformers
Magnetic transformers

options Manual Override -MO


DDMC802
Dimming/Relay/HF Ballast/
Fan/Curtain Controller

electrical diagram mounting dimensions


T 6.3A M205

Output Card 1 Slot CH1


T 6.3A M205
N
Output Card 2 Slot CH2
T 6.3A M205
N
Supply: Output Card 3 Slot CH3
230V 16A T 6.3A M205
N
1 Phase Output Card 4 Slot CH4
L T 6.3A M205
N
N Output Card 5 Slot CH5
E T 6.3A M205
N
Output Card 6 Slot CH6
T 6.3A M205
N
Output Card 7 Slot CH7
T 6.3A M205
N
Output Card 8 Slot CH8
N

µP
+15V
AUX
Shield
GND
D+
D-

DyNet
RS485

For further information contact:

t +61 2 8338 9899 • f +61 2 8338 9333


dynalite-online.com • info@dynalite-online.com

DDMC802 Data Sheet Rev L October 2009


Specifications subject to change without notice. © Dynalite Intelligent Light Pty Ltd. Unit
6, 691 Gardeners Road Mascot 2020 Australia. ABN 97 095 929 829. All rights reserved.
Dynalite, DyNet and associated logos are the registered trademarks of Dynalite Intelligent
Light Pty Ltd. Not to be reproduced without permission.

You might also like