Professional Documents
Culture Documents
SCJ50 - Self Locking Cube Jack (9672GB)
SCJ50 - Self Locking Cube Jack (9672GB)
I N C R E M E N TA L L I F T I N G SY S T E M W I T H A U TO M AT E D M EC H A N I C A L LOC K I N G
SCJ-Series, Self-Locking Cube Jack
▼ SCJ-50, Enerpac Self-Locking Cube Jack
Incremental lifting
system with automated
mechanical locking
▼ Typical set-up with 4 Self-Locking Cube Jacks and cribbing blocks to lift a transformer (hydraulic power
pack and hoses not shown).
2 www.enerpac.com
Self-Locking Cube Jack
Self-Locking Cube Jack
Easy-to-use, compact and The Cube Jack End Block is equipped with
SCJ
portable jacking system that an adjustable saddle for initial alignment Series
utilizes base lifting frames and with the load. All controls except for the
self-aligning, lightweight steel cribbing main directional valve, which is on the
blocks, instead of wooden cribbing hydraulic power unit, are included on the
materials. Cube Jack.
6 7 8
2 9
10
3
SCJ-Series, Self-Locking Cube Jack
▼ SCJ-50, Enerpac Self-Locking Cube Jack
Incremental lifting
system with automated
mechanical locking
Split-Flow Pumps
Enerpac recommend to use the
SFP-Series Pumps with multiple
outlets with equal oil flow.
For lifting and lowering
applications on multiple points, Split-Flow Pumps
are a far better alternative than using separately
operated pumps.
Page: 6
Included with SCJ-50 are:
▼ SCJ-50 Self-Locking Cube Jack at maximum height of
• Cube Jack Basic Unit 2067 mm with 11 lifting barrels.
• End Block with Swivel Saddle
• 11x Cribbing Blocks
• Transportation Frame.
▼ Forklift tabs on Cube Jacks for easy transportation and positioning with a pallet truck.
4 www.enerpac.com
Self-Locking Cube Jack and Accessories
▼ SCJ5F Transportation Frame
Transportation Frame SCJ
• For easy storage and transport Series
of one SCJ-50 unit
726
428
End Block with Swivel Saddle
300
Lightweight Cribbing Blocks
11 Cribbing Blocks are included
with a SCJ-50 Cube Jack.
50 adjustable
351
500
310
310
min. 494
220
300
476
91
443
131
356
125
• Smart valve technology allows both controlled lifting and lowering of Split-Flow Pumps
multiple points SFP-Series Pumps with multiple
outlets with equal oil flow. For
• 4, 6 or 8 split-flow outlets with equal oil flow lifting and lowering applications
• Valve operation with advance/hold/retract function on multiple points, Split-Flow Pumps are a
far better alternative than using separately
• Remote pendant (24 V solenoid) control operated pumps.
• Oil flow per outlet from 0,45 to 1,30 l/min at 700 bar
• Pressure compensated flow control per circuit
• Adjustable pressure relief valve per circuit
Remote Control Pendant
• All models include pressure gauge per circuit.
Split-Flow pumps with solenoid
valves include a remote pendant
with selector switches for each
individual outlet, allowing single
or multiple cylinder operation.
▼ Typical set-up with 4 Self-Locking Cube Jacks and cribbing blocks to lift a transformer. Enerpac
recommends to power the Cube Jack using SFP-Series Split-Flow Pump (pump and hoses not shown).
6 www.enerpac.com
SFP-Series, Split-Flow Pumps
▼ HC-7206 Thermo-Plastic Hose Thermo-Plastic Safety Hoses
• For demanding applications, SFP
featuring a 4:1 safety factor Series
• Max. working pressure 700 bar
• Outside jacket is polyurethane,
to provide maximum abrasion
resistance.
Reservoir Capacity:
40 and 150 litres
Thermo-Plastic Safety Hoses Split-Flow Outlets:
Hose
Internal
Hose End
Assemblies and Couplers
Hose
Length
Model
Number
Weight 4, 6 and 8 outlets
Diameter Flow at Rated Pressure:
0,45 to 1,30 l/min
(mm) End one End two (m) (kg)
Maximum Operating Pressure:
0,9 HC-7203 0,8
3/8”
CH-604
1,8 HC-7206 1,0 700 bar
NPTF 3,0 HC-7210 1,5
6,4
6,1 HC-7220 2,9
6,1 HC-7220C 3,1
CH-604 CH-604
15,0 HC-7250C 7,0
5 1
2
6
3
Split-Flow Pumps
Pump Cart
Nr. of Reservoir Oil Flow Model Motor Dimensions System
Easily tows pump around jobsite.
Split-Flow Size per Outlet Number * Size (mm) Lifting
Outlets @ 700 bar (400V, 3ph, Speed Can be used with all models of
50Hz) Split-Flow pumps.
(litres) (l/min) (kW) A B C (kg) (m/hr) Dimensions (LxWxH): 1219 x 762 x 419 mm
40 0,45 SFP 404SW 5,5 1019 660 900 240 2 Weight: 64 kg
4
150 0,90 SFP 409SW 5,5 1372 605 1130 475 4
40 0,45 SFP 604SW 5,5 1019 660 900 240 2
6 Description Model Nr.
150 1,30 SFP 613SW 11 1372 805 1200 550 5
Pump Cart LHPC
8 150 1,30 SFP 813SW 15 1372 805 1200 590 5
* 4/3 Solenoid (24V) Valve Operation with Advance/Hold/Retract. With Remote Control Pendant.
7
LIFTING We design and manufacture heavy lifting equipment. For more than 60 years, we’ve combined high
pressure hydraulics and controls to deliver intelligent and innovative solutions that maintain the
SYSTEMS
highest level of quality, reliability and safety. We will be your supplier and partner; we will support
you throughout the entire life of your project, your success is ours.
www.enerpac.com