Professional Documents
Culture Documents
Sizing_FLO_7R2C_20240710T092409Z009
Sizing_FLO_7R2C_20240710T092409Z009
Project
Project
C.Project No.
Customer:
TAG FT-101
Timestamp ---
Review number ---
Sales order number
Contact person
eMail:
Phone
Fax
Under no circumstances is Endress+Hauser liable for errors, neither in the Software and in its documentation, nor for any errors
and consequential damage which may arise out of their use. The results in Applicator apply to parameters entered by the user. A
change in these parameters could lead to different results. Mandatory data can be found in the corresponding Operating Instruction
(BA) and Technical Information (TI).
suggests an instrument without PED option,
when ATEX II2G or ATEX II3 is selected.
Under no circumstances is Endress+Hauser liable for errors, neither in the Software and in its documentation, nor for any errors
and consequential damage which may arise out of their use. The results in Applicator apply to parameters entered by the user. A
change in these parameters could lead to different results. Mandatory data can be found in the corresponding Operating Instruction
(BA) and Technical Information (TI).
Applicator Sizing - Flow
Project :
Customer: C.Project No.:
Contact person: Phone: Fax:
eMail:
TAG : FT-101
Timestamp: --- Review number: ---
Sales order number:
Fluid description
Medium character Clean
Fluid group (PED) Normal Fluid (Fluid group 2)
Fluid type Newtonian
Fluid stability Stable
Tc (Critical temperature) 401.1 °C Tm (Melting point) 0.04 °C
Pc (Critical pressure) 23.3516 kg/cm2 Tb (Boiling point) 100 °C
Kappa 1.29
Calculated results
Density nom. 2.6358 kg/m3 Pressure nom. 4 kg/cm2_g
Viscosity nom. 0.01404 cP Temperature nom. 151.3 °C
Sound velocity nom. 493.6 m/s
Vapor pressure nom. 5.0332 kg/cm2_a
Under no circumstances is Endress+Hauser liable for errors, neither in the Software and in its documentation, nor for any errors
and consequential damage which may arise out of their use. The results in Applicator apply to parameters entered by the user. A
change in these parameters could lead to different results. Mandatory data can be found in the corresponding Operating Instruction
(BA) and Technical Information (TI).