Professional Documents
Culture Documents
Panavise 75103-194
Panavise 75103-194
Page 1 of 1
STEP #1 Remove the plastic trim panel on the right side of radio/trip computer. Trim panel will unsnap with
a slight prying pressure from the underside surface. Remove upper right screw.
STEP #3 Position InDash Mount on the right side of radio. Align top hole of Mount to upper right hole where
you just removed the screw. Replace screw and add additional supplied self-drilling screw to the
lower hole of mount.
STEP #4 The plastic trim panel has several small ribs on the mounting side, the three upper ribs must be
removed (or trimmed back 1/8") in order for the trim to be reinstalled flush with the mating dash
components.
03-19-02
There may be recent updates to this Instruction Sheet, please visit our website or contact PanaVise Products, Inc. for the latest revision as well as for the most
complete up-to-date PanaVise InDash Applications List: 7540 Colbert Dr., Reno, NV, Phone: 800.759.7535, 775.850.2900, Fax: 800.395.8002,
www.panavise.com