Professional Documents
Culture Documents
tos tle 6 edited
tos tle 6 edited
tos tle 6 edited
Department of Education
REGION III – CENTRAL LUZON
______1. It is a process of using a lathe to make various forms and shapes of wood.
A. hand carving C. sculpting
B. pyrography D. woodturning
______5. This is considered a decorative technique in which powder is applied on wood or other
materials.
A. embossing C. inlaying
B. gilding D. painting
______8. Why do artisans and entrepreneurs need to be aware and updated on new and
innovative
methods of enhancing and decorating wood, bamboo, and metal craft?
A. To reach their consumers through different selling technique
B. To become a successful entrepreneur
C. To gain more money/profit
D. To sell all of their products
______9. What are the products made of wood preferred by craft buyers?
A. tops jewelry, decorative accessories
B. home furnishings, table
C. home accents, and garden decors
D. glasses, plates, forks and spoon
______10. What are some of the finishing materials that can enhance finished products made of
wood, bamboo, and metal?
A. rocks C. varnish
B. sandpaper D. water
______11. It is a type of finishing material that adds color and beauty to the finished product?
A. enamel C. shellac
B. paint D. stain
______12. Why do we need to do sketching, outlining, and shading before decorating finished
products?
A. To have a quantity of the product.
B. To show your talent on how you made the product
C. To identify the amount of the product that adds beauty in it.
D. To create a product with a good design that can attract the consumers.
______13. Which of the following is the effect of paint when you apply it to the finished product?
A. It beautifies wooden objects and makes them easy to clean.
B. It gives woodwork and furniture a rich, antique appearance.
C. It gives the wood a shiny glow.
D. It removes the rust on the product.
______14. It is the process of marking the inside of an outline to project shadows or degrees of
lightness and darkness.
A. drawing C. shading
B. outlining D. sketching
______17. Which of the following is the first step in making a project plan?
a. It is good to make a plan before starting to work.
b. Project planning is done after finishing your project.
c. You need to apply work skills in making your project.
d. Following the health and safety measure while doing a project.
______18. Which of the following DOES NOT show consideration and appreciation in the
finished
product?
A. benefits of the projects C. using expensive materials
B. finishing the project on time D. using recyclable materials
______19. Which of the following best describes the underlined word? MONEY
A. Budget your expenses and make a list of the things needed for your project.
B. Follow the specific steps to finish the project smoothly.
C. Knows the proper materials that will be needed in the project
D. Set a deadline/time frame when to finish your project.
______20. What would you feel if you got a higher grade and nice feedback on the project you
made?
A. angry C. worry
B. happy D. sad
______21. What should you do if you get a lower mark/grade on the project or work you made?
A. I will do it again and I will exert more effort to improve my project.
B. I will ask my mother to help me in making my project.
C. I will cry and wish my project got a better score.
D. I will never make any project again.
______22. It refers to any written, electronic or graphic communication on the packaging, what is
it?
A. design C. labeling
B. directions D. packaging
______24. This refers to the amount of gain earned from a sale or service/product sold.
A. expenses C. revenue
B. income D. selling price
______25. Maria bought materials for her lampshade project. What do you call to the money paid
by Maria in buying the materials for her project?
A. expenses C. revenue
B. income D. selling price
______26. To maximize productivity, every company needs to have a sound production _______.
A. cost C. plan
B. earned D. revenue
______27. Effective planning is a complex process that covers a wide variety of activities to
ensure that materials, equipment and human resources are available when and where
they are needed. The statement is _______
A. bias C. false
B. extreme D. true
______28. Marco wants to tighten the screw on the lamp he is making. What tool is he going to
use?
A. hammer C. screw driver
B. pliers D. wire stripper
______30. What gadget is used to call the attention of the owner of the house.
A. doorbell C. horn
B. extension cord D. lampshade
______31. A gadget used to access electricity in our appliances is far from the convenient outlet.
What is it?
A. bulb C. extension cord
B. doorbell D. lampshade
______32. Which of the following shows a safety practice in doing electrical works?
A. Never use equipment with frayed cords, damaged insulation or broken plugs.
B. Touch or try repairing any electrical equipment or circuits with wet hands
C.Use water at all times when working with electricity.
D. Turn on the main switch while working
______34. Which of the following is INCORRECT about doing the right protocol when doing
electrical work?
A. An experienced electrician can do some repairs of electrical appliances even
with wet hands.
B. Always use tools with non-conducting handles when working on electrical
devices.
C. An electrical current passes to the person as you touch a live wire
D. Unplug the equipment if water spilled into it.
______38. What safety precaution should he always bear in mind to avoid any accident?
A. Do not use containers for the tools and equipment.
B. Use tools and equipment that are in bad condition
C. Use appropriate tools or equipment for the particular activity.
D. Use both bad and good condition tools or equipment for the particular activity.
______39. Which of the following statements is NOT TRUE about assessing the repaired object?
A. Make a plan before repairing the broken parts.
B. In assessing furniture make sure that the parts will not function again.
C. Be sure that the repaired gadgets/furniture/items will function again
D. Proper assessment of gadgets/furniture is about checking the quality of the
repaired parts.
______40. Which of the following household repair tools is used in measuring the length of the
wood?
A. pull-push rule c. screw
B. ruler d. T-square
______42. Materials common among people living near the seashore also used in improving the
repaired material. What is it?
A. coconut C. seashells
B. fish D. seaweeds
______43. What are the most serious problems that need immediate action nowadays?
A. buying of cars c. selling of goods
B. kidnapping d. waste disposal
______44. What process is used to convert waste materials into reusable items to prevent waste
of potentially useful materials?
a. recycling c. reusing
b. reducing d. Both b and c
______45. If you apply the 3Rs symbols at home, to lessen the waste materials, what is easier
for
you to do?
A. recycling c. reusing
B. reducing d. selling
______46. A methodology developed in Japan that is used to organize a workplace for work to
be
efficient and effective.
A. Seiri C. Seiton
B. Seiso D. Shitsuke
______48. What is important to keep in mind when recycling a container that once contained
food
or beverage?
A. Absolutely nothing
B. Rinse out any excess residue before recycling
C. Make sure that containers are closed tightly so no residue will leak out.
D. Both b and c
______49. In classifying waste materials what are the things we have to consider?
A. The size of the materials
B. The color of the materials
C. The physical appearance of the materials.
D. The common characteristics of the materials.
______50. A principle that can be done in the work area after it has been cleared of unneeded
items. What is it called?
A. Seiri C. Seiton
B. Seiso D. Shitsuke
CODE DIFFI
EASY AVERAGE No. of
COMPETENCY CULT
Items
Creativ
Knowledge Comprehension Application Analysis
ity
Repairs simple
gadgets/furniture/ furnishings at
home and school
3.1.1 gathers data on how to do
simple repairs using technology
or other methods
3.1.2 repairs broken furniture
(chairs, cabinets, and tables), TLE6IA 36, 37,
40, 41 6
door knobs, extension cords, -0h-10 38, 39
lamp shades and other products
3.1.3 assesses repaired
gadgets/furniture/ furnishing as
to its reusability and
functionality using rubrics
3.1.4 improves repair
undertaken
TOTAL 50