Republic of the Philippines
DEPARTMENT OF LABOR AND EMPLOYMENT
ON Occupational Safety and Health Center a,
E semayrt North Avenue corner Agham Road, Diliman, Quezon City
poate CCOFSCO REA
SAFETY CONTROL DIVISION Revisor Nos 02
PE TESTING AND ASSESSMENT PROCEDURE efecive: February 22018
SAFETY SHOES TEST RESULTS
Request Reference Code: PPE-SSHOES-2020-042
BRAND NAME
[SUPERTUFF
[TYPE SAFETY BOOTS
DISTRIBUTOR
‘ADDRESS
UNIVERSAL ELASTOMER INC.
RIS INDUSTRIAL COMPLEX, MALIS, GUIGUINTO, BULACAN
Shoe Size:
‘Toe Cap Matera:
Injection Mod
‘Toe Cap Specifications:
Mid-Solp Device Material:
Goodyear Welt
impact Resistance |
Test Classification
ee
ven = Women Testing Standard:
STEEL ‘Occupational Safety and Health Standards
128 amlengh 20 mmticiness | » Rule 1080: Personal Protective Equipment and Devices
mm eight 7.8 mmfange
Thickness _0.7_ mm
1-75 PASSED
Specimen
‘Number
(Compression
Resistance Test
Classification
Interior Height
Clearance After REMARKS
26.0
marks:
Based on PNS-ASTM F2412:2016 and
PNS ASTM F2413:2016
Safety Shoes Test Classification: Class 75
CRITERIA
The specimen shall have a minimum interior height clearance
equal o or greater tan he following:
12.7 mm{ormenis shoes and 11.9 mm for women's shoes
CRITERIA
‘The specimen shal have a minimum interior height clearance
‘equal to or greater than the folowing:
4127 mmfor men's shoes and 11.9 mm for women's shoes
122.5 kgf
188 PASSED
192
The puncture redtnt device shal pss ifthe tp of tle pin
does not visually penetrate beyond the face of the material
rarest the fot, alr an applied force of 122.5 gt
XK
Page 1 of2Republic of the Philippines
DEPARTMENT, OF LABOR AND’ EMPLOYMENT In.
@' Occupational Safety and Health Center Mittin.
Pen North Avenue comer Agham Read, Diliman, Quezon City pee
SAFETY CONTROL DIVISION Revision No.: 02
PPE TESTING AND ASSESSMENT PROCEDURE Effective: February 20, 2019
SAFETY SHOES TEST RESULTS
Request Reference Code: _ PPE-SSHOES-2020-042.
D. ELECTRICAL RESISTANCE TEST
Electrically resistant protective footwear must be able to
withstand an application of 18,000 volts for 1 minute wih no
leakage currentin excess of 1 mA.
Test
voc
TESTNOT
CONDUCTED 1 Megaohm to 100 Megaohms
‘COMMENTS:
‘The specimens passed the requirements of PNS ASTM F 2413:2016 for Impact Resistance
test, Compression Resistance test, Midsole Device Puncture Resistance test and Electrical,
Resistance test:
Page 2 of 2
Test Conducted By:
Jat,
MR. MARION A. VILLEGAS
Engineering Assistant
Approved By: Date:
CA Kt 13 FEBRUARY 2020
ENGR. CONCEPCION T. STO. TOMAS
Chief, Safety Control Division
Executive Director