Professional Documents
Culture Documents
Ss304 Class 2
Ss304 Class 2
Ss304 Class 2
PART 1 GENERAL
1.1 SCOPE
A. This specification covers 304L stainless steel piping. Some applications are: corrosive gas or
liquid processes, process air, process water, Acetate Tow Dope before final filtration (4th stage
filter press).
B. Design Limits based on 316 stainless steel ASME B16.34 Class 150 valves and ASME B16.5
Class 150 ASTM A182 – F316/F316L stainless steel flanges, except NPS 18" - 24" based on
pipe. Also based on Eastman's temperature limit on PTFE. See notes 7 and 7a for reduced
ratings for 316L and 304/304L flanges:
Maximum Pressure Design Temperature
2
Sizes, NPS psig kPag bar-g kg/cm °F °C
1/2 - 16 275 1897 19.0 19.3 -20 to +100 -29 to +38
18 - 24 260 1793 17.9 18.3 -20 to +100 -29 to +38
All Sizes: 235 1620 16.2 16.5 200 93
215 1483 14.8 15.1 300 149
205 1414 14.1 14.4 350 177
Full Vac Full V Full V Full V -20 to +350 -29 to +177
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
PART 2 PRODUCTS
ITEM, NPS DESCRIPTION NOTES CODE
Pipe:
1/2 - 24 ASTM A312-TP304L SS WLD 10S PE 02 206521
Fittings:
1/2 - 24 CAP ASTM A403-WP304L-S SS BW 10S ASME B16.9 203357
1/2 - 24 ELL 45 ASTM A403-WP304L-W SS BW 10S ASME B16.9 203360
1/2 - 24 ELL 90 ASTM A403-WP304L-W SS BW 10S ASME B16.9 203358
1/2 - 24 REDUCER CONC ASTM A403-WP304L-W SS BW 10S ASME B16.9 203352
1/2 - 24 REDUCER ECC ASTM A403-WP304L-W SS BW 10S ASME B16.9 203353
1/2 - 24 STUB END LJ ASTM A403-WP304L-W SS BW 10S TYPE-A ASME B16.9 205371
SHORT
1/2 - 24 TEE ASTM A403-WP304L-W SS BW 10S ASME B16.9 203355
1/2 - 24 TEE RED ASTM A403-WP304L-W SS BW 10S ASME B16.9 205612
O'lets: (Branch sizes shown) 81
1/2 - 1 1/2 ELBOLET ASTM A182-F304L SS BW 10S LW MSS SP-97 205522
1/2 - 14 WELDOLET ASTM A182-F304L SS BW 10S LW MSS SP-97 203412
Threaded Items: 06
1/2 - 2 ELBOLET ASTM A182-F304L SS 3000 NPT MSS SP-97 06 207676
1/2 - 2 THREDOLET ASTM A182-F304L SS 3000 NPT MSS SP-97 06 207633
1/2 - 2 BUSHING ASTM A182-316 SS NPT ASME B16.11 06 200305
1/4 - 2 CAP ASTM A182-316 SS 3000 NPT ASME B16.11 06 207204
1/4 - 2 CROSS A182-316 SS 2000 NPT ASME B16.11 06 209739
1/2 - 3 COUPLING ASTM A182-316L SS THD NPT 3000 ASME B16.11 06 200308
1/4 - 2 ELL 45 ASTM A182-316 SS 2000 NPT ASME B16.11 06 208539
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
NOTES:
02 Pipe Bending: NPS 8 (metric DN 200) and smaller (minimum schedule 10S pipe) may be cold bent
in place of using welding elbows, unless otherwise stated in project instructions. See Specification
15480.0101, “Piping, Cold Bending” for requirements that shall be followed.
03 Use with old sch 5S pipe (used prior to 1993).
04 Stainless steel blind flanges in the smaller sizes typically have a cost advantage of over the lined
carbon steel flanges. Larger size stainless steel blind flanges are not normally considered
economical. Sizes outside those listed may be used. See Para. 1.4(F).
05 Sheet gasket is for site cutting, specials and odd connections.
06 Threaded items should be limited for use after terminal valves at vent and drain assemblies, pressure
and temperature connections, connections to equipment, etc. Primary runs of piping are to be
welded so that schedule 10S pipe can be used rather than sch 40S. Thread cutting tools must be
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
PART 3 EXECUTION
3.1 See Specification 15480.0001, "Piping, General Notes"
3.2 Assembly Details - Following are recommended vent/drain and instrument connections. Other
connections may show in design:
HDR SIZE DESCRIPTION DETAIL
Vent & Drain Connection Assemblies (Standard Details 15480.2001):
1/2 UNVALVED VENT/DRAIN 1/2 BW TEE FLANGE U22
3/4 UNVALVED VENT/DRAIN 3/4 BW TEE FLANGE U22
1 - 1 1/2 UNVALVED VENT/DRAIN BW TEE/RED 3/4 FLANGE U27
2-6 UNVALVED VENT/DRAIN 3/4 BW WOL FLANGE U25
8 - 24 UNVALVED VENT/DRAIN 1" BW WOL FLANGE U25
1/2 VALVED VENT/DRAIN 1/2 BW TEE PLUG VALVE V67
3/4 VALVED VENT/DRAIN 3/4 BW TEE PLUG VALVE V67
1 - 1 1/2 VALVED VENT/DRAIN BW TEE/RED 3/4 PLUG VALVE V68
2-6 VALVED VENT/DRAIN 3/4 BW WOL PLUG VALVE V72
8 - 24 VALVED VENT/DRAIN 1 BW WOL PLUG VALVE V72
(Use for hydrostatic vents & drains)
8 - 24 VALVED VENT/DRAIN 3/4 BW WOL PLUG VALVE V72
(Use where P&ID specifies 3/4" process vents or drains)
Pressure Connection Assemblies (Standard Details 15480.2002):
1/2 PRESSURE CONN 1/2 BW TEE PLUG VALVE P28
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
3.3 FABRICATION
A. See Specification 15480.0100, "Piping, General Fabrication"
B. Welding: See Specification 15480.0400, "Piping, General Welding"; Specification 15480.0402,
"Piping, Stainless Steel Welding", and Specification 15480.0450, "Pipe Weld Inspection &
Testing"
3.4 INSTALLATION
A. See Specification 15480.0200, "Piping, General Installation"
B. Bolting:
1. Lubricant is required and shall be applied evenly on the bolt threads and all other mating
surfaces of the nut, washer, and bolt (e.g., the face of the washers, the inner face of the nuts,
and the inner face of the bolt head if applicable). See Specification 15480.0207, "Lubricants
for Bolting" to determine the correct lubricant to use.
2. See Specification 15480.0210, "Flange Assembly Guidelines for Bolted Joints in Piping",
for the assembly of bolted flange connections on piping systems.
C. Grounding and Bonding:
For grounding and bonding requirements across non-conductive piping joints, including orifice
plates in installations with PTFE based gaskets, see para. 1.6(H) of Specification 15480.0001,
"Piping, General Notes".
3.5 TESTING
A. See Specification 15480.0300, "Piping, General Testing"
1. Vacuum Service piping system: Apply a Leak Test with internal pressure at 1.5 times the
maximum operating external pressure, or 15 psig (103 kPag, 1.03 barg, 1.05 kg/cm²)
minimum. If a toxic or flammable system, also apply a Sensitive Leak Test if the initial
leak test is not conducted on the installed piping system.
2. Category D piping system: Apply an Initial-Service Leak Test
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.
SPECIFICATION
3.6 CLEANING
A. See Specification 15480.0500, "Piping, General Cleaning"
24 T
20 F T
18 F F T
16 F F F T
14 F F F P T
12 F F F P P T
Branch Size, NPS
10 P F F P P P T
8 P P P P P P P T
6 P P P P P P P P T
4 P P P P P P P P P T
3 P P P P P P P P P P T
2 W W W W W W W W W W W T
1 1/2 W W W W W W W W W W W E T
1 W W W W W W W W W W W E E T
3/4 W W W W W W W W W W W E E E T
1/2 W W W W W W W W W W W W E E E T
24 20 18 16 14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2
Header Size, NPS
END OF SPECIFICATION
This document is the property of Eastman Chemical Company and must only be used in connection
with work done for this company.