Professional Documents
Culture Documents
BRS-1 Installation Instructions lined pond
BRS-1 Installation Instructions lined pond
Supplies Provided:
x3 M20 glands
x3 PG9 glands
x3 PG11 glands
Cement 10 cm PVC Pipe Cut to 1/2 meter 20 Liter Bucket Drill and Drill Bit
Stand PVC pipe upright in the Mix cement according to Pour cement in bucket, making sure to
center of the bucket package instructions keep the pipe centered, and let dry
4 5
WiFi Instructions:
- Plug micro HDMI cable into HDMI port on the Pi
- Plug other end of the HDMI cable into your monitor
- Plug your keyboard and mouse into USB ports on the Pi
- Plug case into power source, fan will light and spin
- Connect to wifi
- Plug USB 3.0 Ethernet Adapter into the USB port on the Pi
USB ports
- Install a new gland in the pondside case for the new ethernet cable, mimicing step 12
- Plug ethernet cable into the USB 3.0 Ethernet Adapter
10 11
Plug the provided cable into the BRS-1 Screw on and tighten the locking sleeve
12
Unscrew the gland on the ethernet end of the cable.
Pass the cable through the small opening in the right side of
pondside case and tighten the gland on the inside to secure.
outside view
13