Professional Documents
Culture Documents
Acute Manuel Web En
Acute Manuel Web En
1 - Safety information
Important safety information
This unit is intended for indoor use only. Do not use it in a wet, This product contains non-isolated electrical components. Do not
or extremely cold/hot locations. Failure to follow these safety ins- undertake any maintenance operation when it is switched on as
tructions could result in fire, electric shock, injury, or damage to it may result in electric shock.
this product or other property.
Symbols used
Page 2
ACUTE - Active and passive speakers ENGLISH
Instructions and recommendations
9 - Heat exposure :
Sustained contact or proximity with warm surfaces may cause
overheating and product damages. Please keep this product
away from any heat source such as a heaters, amplifiers, hot
plates, etc...
Page 3
ENGLISH ACUTE - Active and passive speakers
2 - Introduction
Thanks for choosing the AUDIOPHONY® ACUTE series.
The ACUTE series features plastic speakers producing high sound pressure levels and designed to bring the best
performances of their price range.
We kept several criterias while designing these speakers:
- High power handling and unsurpassed sound quality.
- Wide and smooth basses and trebles rendering.
- Sophisticated ergonomy for transportation and installation.
The combined effort of our engineers allowed us to meet our expectations, they created a speaker series perfect
for any situation: Home Cinema, live performances, studios, ... etc.
3 - Wiring
AC UTE-1 2
Fre q ue nc y Ra ng e 4 5 Hz~ 1 8 kHz
Po we r Ha nd ling 300W
Im p e d a nc e 8 o hm
SPL(1 W/1 m ) 98dB
IN/O UT
PIN 1 + FULL RANG E+
PIN 1 - FULL RANG E -
SER. NO :
OF F 3 0 Hz 5 0 Hz OF F 10 0 Hz 15 0 Hz 0 .7 7 5 V 3 2 dB 2 6 dB CAUTION
LOW CUT LOW PAS S GA IN
R IS K O F E L E C T R IC S HOC K
DO N OT O P E N
!
O UTPUT A
LINK A INPUT A
P IN 1: S IGN A L GN D OUTP UT A S S IGNME NT
O UTPUT B
M OD E L IM IT E R GR OUND
S T E R E O PA R A LLE L B R IDGE ON OF F L IF T GR OU N D
Page 4
ACUTE - Active and passive speakers ENGLISH
AC UTE-1 2 AC UTE-1 2
Fre q ue nc y Ra ng e 4 5 Hz~ 1 8 kHz Fre q ue nc y Ra ng e 4 5 Hz~ 1 8 kHz
Po we r Ha nd ling 300W Po we r Ha nd ling 300W
Im p e d a nc e 8 o hm Im p e d a nc e 8 o hm
SPL(1 W/1 m ) 98dB SPL(1 W/1 m ) 98dB
IN/O UT IN/O UT
PIN 1 + FULL RANG E+ PIN 1 + FULL RANG E+
PIN 1 - FULL RANG E - PIN 1 - FULL RANG E -
SER. NO : SER. NO :
OF F 3 0 Hz 5 0 Hz OF F 10 0 Hz 15 0 Hz 0 .7 7 5 V 3 2 dB 2 6 dB CAUTION
LOW CUT LOW PAS S GA IN
R IS K O F E L E C T R IC S HOC K
DO N OT O P E N
!
O UTPUT A
LINK A INPUT A
P IN 1: S IGN A L GN D OUTP UT A S S IGNME NT
O UTPUT B
M OD E L IM IT E R GR OUND
S T E R E O PA R A LLE L B R IDGE ON OF F L IF T GR OU N D
1+
2-
1-
2+
Page 5
ENGLISH ACUTE - Active and passive speakers
Page 6
ACUTE - Active and passive speakers ENGLISH
3 - 5 Active speakers wiring: ACUTE-12/AMP et ACUTE-15/AMP
Page 7
ENGLISH ACUTE - Active and passive speakers
4 - Overview
2
3
4
5
6
10 8
9
Page 8
ACUTE - Active and passive speakers ENGLISH
4 - 2 Amplification module overview: ACUTE-12/AMP and ACUTE-15/AMP
1 2 3 4 5
17
16
15 6
14
13
7
12
8
9
11 10
1 - Trebles clip LED 9 - Fuse compartment
Lights up when trebles reach saturation. If need to replace the fuse, please make sure the
2 - Bass volume control new one has the exact same characteristics to
From -10 to +10 dB. prevent any damage to your speaker.
3 - Treble volume control 10 - POWER Switch
From -10 to +10 dB. Turns the amplification module ON/OFF.
4 - Line volume control 11- Voltage selector
Affects the MIX OUTPUT sound level. Use this switch to adapt the speaker to the voltage
5 - Main volume control of the electrical outlet.
6 - Line input 12 - Microphone 2 volume control
Connect here the output of your mixing desk or 13 - Microphone 1 volume control
extra active speaker. 14 - Microphone 2 input
7 - MIX Output 15 - Microphone 1 input
Allows you to connect an extra active speaker or 16 - Power LED
amplifier. This output combines together the signals Lights up when the speaker is ON.
of all inputs. 17 - LF clip LED
8 - Power input socket Lights up when basses reach saturation.
Use the supplied power cord to connect the unit to
an electrical outlet.
Page 9
ENGLISH ACUTE - Active and passive speakers
5 - Dimensions
5 - 1 ACUTE-08 and ACUTE-08/AMP ACUTE-10 and ACUTE-10/AMP
299 mm
615 mm
740 mm
238 mm
270 mm
416 mm
475 mm
356 mm
400 mm
245 mm
270 mm
146 mm 150 mm
Page 10
ACUTE - Active and passive speakers ENGLISH
6 - Technical specifications
6 - 1 ACUTE-08/AMP
6 - 2 ACUTE-08
Page 11
ENGLISH ACUTE - Active and passive speakers
6 - 3 ACUTE-10
TRANSDUCERS
Subwoofer
• Diameter: 10" / 65 mm
• Frequency response: 60 Hz - 3 kHz
• Sensitivity (1W@1M) : 95 dB
• Nominal impedance: 8 Ohms
• Power handling: 250 W
6 - 4 . ACUTE-10/AMP
Page 12
ACUTE - Active and passive speakers ENGLISH
6 - 2 ACUTE-12
TRANSDUCERS
Subwoofer
• Diameter: 12" / 300 mm
• Coil diameter: 3" / 75 mm
• Frequency response: 45 Hz - 3 kHz
• Sensitivity (1W@1M): 98 dB
• Nominal impedance: 8 Ohms
• Power handling: 300 W
6 - 3 ACUTE-12/AMP
Page 13
ENGLISH ACUTE - Active and passive speakers
6 - 4 ACUTE-15
MAIN CHARACTERISTICS Tweeter
• Frequency response: (-3dB) 45 Hz - 18 kHz • Membrane diameter: 1.75" / 44,5 mm
• Frequency range (-10dB): 40 Hz - 20 kHz • Membrane material: Titanium
• Impedance: 8 Ohms • Frequency response: 1kHz - 20kHz
• Sensitivity: 99 dB • Sensitivity (1W@1M): 106dB
• Power handling (Program): 350 W • Nominal impedance: 8 Ohms
• Power handling (Max.): 1400 W • Power handling: 50 W
• SPL Max. Peak @1 m: 130,5 dB
• SPL Max. (long term) @1 m: 124,5 dB PHYSICAL CHARACTERISTICS
• Cut-off frequency: 1,7 kHz • Height: 740 mm
• Horizontal dispersion: 80° • Width: 475 mm
• Vertical dispersion: 60° • Depth: 400 mm
• Output connectors: Speakon NL-4 x 2 • Net weight: 25 kg
• Operating temperature: -10 C to 55°
TRANSDUCERS
Subwoofer
• Diameter: 15" / 381 mm
• Coil diameter: 3" / 75 mm
• Frequency response: 40 Hz - 3 kHz
• Sensitivity (1W@1M): 99 dB
• Nominal impedance: 8 Ohms
• Power handling: 350 W
6 - 5 ACUTE-15/AMP
Page 14
ACUTE - Active and passive speakers ENGLISH
Page 15
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to modifications without
prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations.
Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com
AUDIOPHONY® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE