Professional Documents
Culture Documents
Sugino Selfeeder Servo Series Catalog 2613E
Sugino Selfeeder Servo Series Catalog 2613E
N2613E
SERVO series
Selfeeder Varimec
A new generation model of Selfeeder Mechatric that has high rigidity to
Aluminium Steel
make a high performance with compact body.
φ8.5 φ 6.5 SSV2・・・・・・・・・ 4p
Linear guide
20,000min-1
(JP PAT.) Aluminium Steel
Multi-spindle Light &
φ 12 φ 8 SSV3・・・・・・・・・ 6p
heads attachable Compact
Aluminium Steel
Spindle speed
Long stroke φ 16 φ 13 SSV4・・・・・・・・・ 8p
variable type
Aluminium Steel
selfeeder servo series is a high-precision CNC controlled Small dia. and
deep hole drilling
Large dia.
drilling φ 25 φ 18 SSV5・・・・・・・ 10p
drilling unit capable to drill newly developed material and
exotic material. Selfeeder Mechatric
High quality servo motor for feed and precise ball screw Multi functionable basic unit featured with higher torque for large hole
Aluminium Steel
designed eliminate the feed rate fluctuation
drilling and coolant center through etc.
φ 16 φ 11 SSM4・・・・・・・ 12p
Multi-spindle Spindle speed
of feed speed by drilling force; less burr generation for heads attachable variable type Aluminium Steel
φ 24 φ 19 SSM5・・・・・・・ 14p
through hole drilling and longer tool life. Long stroke
Small dia. and
deep hole drilling
Aluminium Steel
High precision, high efficiency, less space and cost Large dia. Coolant φ 14 φ 10 MS3P・ ・・・・・
16p
drilling center-through
reduction that are critical for the machining operation
Aluminium Steel
can be gained with this selfeeder servo series.
Round
shaped body
Linear guide
φ 40 φ 28 MS7・ ・・・・・・・ 17p
Aluminium Steel
Spindle speed 4-spindle
variable type Turret φ 20 φ 13
Aluminium Steel 4TH5・・・・・・・ 20p
Rigid tapping
M 16 M 12
High quality drilling High-rigidity, high-precision structure High-efficient deep hole drilling High-flexibility Easy operation
The fluctuation of the feed speed is A newly developed structure holds Coolant center through type (Max. Spindle rotation speed is variable by 5.7inch touch panel type color display
eliminated by the precise angular the spindle ball screw and linear 6.8MPa) is available for Mechatric attached inverter. (liquid crystal) makes it easy to make
bearing supporting spindle and the guide making the drill unit body rigid series for efficient deep hole drilling Optimize speeds to adapt to different a CNC program and operate even for
Features of high quality ball screw. As the result and strong enough to step spot face by oil hole drill tool. cutting requirements. a beginner operator. Four different
Selfeeder
the generation of burr is reduced and and burnish drilling. (JP PAT.) languages are available for the
the tool life is longer. oversea usage.
Servo series
2 3
SERVO series
Selfeeder
SSV2
Please specify the adjustable spindle nose
when ordering your servo drill.
φ50
φ19
φ50
φ22
Sugino supplies adjustable spindle noses
varimec
other than those shown below, upon request.
25 30
Linear guide
20,000min-1
(JP PAT.) Applicable selfeeder Fig. No. Spindle nose model No.
Fig. 1 KH-12E Fig. 2 KH-14E
Selfeeder
Aluminium SSV2-7200 1 KH-12E
Light &
φ 8.5 Compact
Spindle speed
variable type SSV2-1039 2 KH-14E
Notes 1. Spindle noses KH-E model are applicable to the quick change stub holder of KH-A or KH-E model of NT Tool Co.,Ltd.
2. Quick change stub holder can not use in over 10,000min-1 spindle speed operation.
Mechatric
Steel Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
φ 6.5 User control panel
Standard accessories ① Power cable (UC-81A)・ ・・・・・・・・・・・・ 0.7m
Programming console
PC-03B DC24V ② Power cable for feed motor・・・・・・・・・・・ 5m
15 12 13
(option) PLC, etc ③ Signaling cable for feed motor・・・・・・・ 5m
It provides high performance for production of small parts and small-diameter drilling. Touch panel
TP-01
4
⑪ Power Cable for holding brake (from②)・ ・・・ 1m
(It is available for the specifications of
3
(option) the unit with a holding brake.)
2 11
other attachments
⑭ Varimec SSV2
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting ⑮ Noise filter
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed ⑯ PC cable A (option)・ ・・・・・・・・・・・・・・・・・ 2m
(ADC) (FC200) (S45C) ⑰ Feed motor/LS leading cable・ ・・・・・・・ 3m
19
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg Laptop computer
(prepared by customers) 17 18 ⑱ Spindle motor leading cable・・・・・・・・ 0.5m
⑲ Terminal box for relay
16 7 Power supply for spindle
2,000〜
SSV2-7200 ER11MS 0.5〜7.0 5 4 3.5 6 Connector Three-phase AC200V
20,000 0.9 0.4 5 ∼
Max. 15,000min-1/hr. AC Max. Max.
1,200 15
80 DC brushless servo 200 16.7
390〜 motor motor
SSV2-1039 ER16 0.5〜10.0 8.5 7.5 6.5 Notes 1. The feed controller and the spindle inverter are standard accessories.
3,900
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑯ PC cable A. In such case, a dedicated computer monitoring software is required.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed) Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
7
COM Ground of command for spindle speed OUT1 Under Auto Operation
15
ⅠN0 Emergency stop OUT2 Program end
Width across flat 19
Depth of tool shank insertion Max.35 Feed motor
(11) 78 (5.2) 185 31.5 ⅠN1 Manual coolant ON/OFF OUT3 Origin
Power cable Output
for feed motor ⅠN2 Start up OUT4 Spindle ON
※2
195
211
225
φ28
Signaling cable ⅠN3 Machine zero return OUT5 Ready for single step
SSV2-1039 for feed motor
ⅠN4 Single step OUT6 Coolant ON
ER16 41
Mounting spindle ⅠN5 Spindle alarm OUT7 Forward Limit ON
Dimensions (mm)/
15
54 LS cable ⅠN6 JOG+ OUT8 Alarm
W85.5×D168×H225 5
7
Weight/2.1kg 32 32
ⅠN7 JOG−
Depth of tool shank insertion Max.31 ※1 Voltage: DC24V, Electric current: 10mA
210
Power cable
86.5
for spindle motor ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
Backward side OT
※1
55
7
16 8
4
SSV2-7200
4
225
241
255
Full stroke
ⅠN15 Program 4
5
80 347 (14.5)
ⅠN16 Program 8
Machine zero point
ⅠN17 Program 10
ⅠN18 Program 20
Dimensions (mm)/ 5
7
30.2
Note : Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air. W116×D195.7×H255 (116) ⅠN19 Program 40
Weight/3.2kg ⅠN20 Program 80
4 5
SERVO series
Selfeeder
SSV3
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
φ80
φ28
φ80
φ39
varimec
other than those shown below, upon request.
Linear guide 30 35
10,000min-1
(JP PAT.) Applicable selfeeder Fig. No. Spindle nose model No.
Selfeeder
Aluminium SSV3-7100 1 KH-14AR Fig. 1 KH-14AR Fig. 2 KH-25A
Light &
12
Multi-spindle
φ heads attachable Compact SSV3-1626 2 KH-25A Note : Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Spindle speed
Mechatric
Electric system diagram
Long stroke All the electric parts supplied as standard are indicated in box.
variable type
Steel The purchaser is responsible for and needs to have the other cables and equipment.
φ 8 Small dia. and
deep hole drilling
Standard accessories User control panel ① Power cable・・・・・・・・・・・・・・・・・・・・・・・・ 0.7m
Programming console ② Power cable for feed motor・・・・・・・・・・・ 5m
PC-03B 12 9 10 DC24V
③ Signaling cable for feed motor・・・・・・・ 5m
other attachments
by customers)
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting ⑭ PC cable A (option)・ ・・・・・・・・・・・・・・・・・ 2m
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed ⑮ I/O cable (UC-94)・・・・・・・・・・・・・・・・・・ 0.7m
(ADC) (FC200) (S45C) 5 ⑯ Analog inputting cable・ ・・・・・・・・・・・・ 0.7m
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg Laptop computer 6
(prepared by customers) 3
14 Power supply for spindle
ER11 0.5〜7.0 2
1,000〜 Three-phase AC200V
SSV3-7100C 6.5 5 4 13 ∼
10,000 0.4 0.4
ER20 0.5〜13.0
Max. DC AC Max. Max.
1,660 43
200 brushless servo 200 16.7
ER20 0.5〜13.0
265〜 motor motor
SSV3-1626C 12 9 8 Notes 1. The feed controller and the spindle inverter are standard accessories.
2,650
ER25 0.5〜16.0 2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑭ PC cable A. In such case, a dedicated computer monitoring software is required.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed) Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
7
COM Ground of command for spindle speed OUT1 Under Auto Operation
φ39
φ80
15
ⅠN0 Emergency stop OUT2 Program end
ⅠN1 Manual coolant ON/OFF OUT3 Origin
φ42
Output
ⅠN2 Start up OUT4 Spindle ON
17 ※2
195
211
225
46 34 ⅠN3 Machine zero return OUT5 Ready for single step
Width across flat 32
80 ⅠN4 Single step OUT6 Coolant ON
140 ER20 Mounting spindle Feed motor 206
ⅠN5 Spindle alarm OUT7 Forward Limit ON
φ32
φ80
15
W85.5×D168×H225 5 ⅠN6 JOG+ OUT8 Alarm
7
Spindle motor Power cable for Weight/2.1kg 32 32
ⅠN7 JOG−
φ34
85.5
φ80
7
φ25
φ19
15
cooling spindle motor
ⅠN13 Program 1
16
Appropriate tube
70
102
6
+0.03
10 0 Power cable for
cooling spindle motor
195
211
225
Air outlet for 33 34 52 216 spindle motor (5m)
cooling spindle motor 116
4-φ11 ⅠN16 Program 8
Full stroke 67 67 186
136 200 570 CS sensor/LS cable for ⅠN17 Program 10
spindle motor (5m)
Machine zero point
ⅠN18 Program 20
Dimensions (mm)/
15
Note : Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air. W85.5×D168×H225 5 ⅠN19 Program 40
7
Weight/2.1kg 30
ⅠN20 Program 80
6 7
SERVO series
Selfeeder
SSV4
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ100
φ100
φ42
φ54
other than those shown below, upon request.
Selfeeder
Aluminium SSV4-2070 1 KH-22A Fig. 1 KH-22A Fig. 2 KH-32A
φ 16 Spindle speed
variable type
Long stroke SSV4-2017 2 KH-32A Note : Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Steel Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
φ 13
Standard accessories User control panel ① Power cable (UC-82)・・・・・・・・・・・・・・・ 0.7m
Programming console ② Power cable for feed motor・・・・・・・・・・・ 5m
15 12 13 DC24V
PC-03B ③ Signaling cable for feed motor・・・・・・・ 5m
other attachments
⑭ Varimec SSV4
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting ⑮ Noise filter
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed ⑯ PC cable A (option)・ ・・・・・・・・・・・・・・・・・ 2m
(ADC) (FC200) (S45C)
6
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg 7
Laptop computer
(prepared by customers) 2
16 Power supply for spindle
1,000〜 3
SSV4-2070 9 8 7 Three-phase AC200V
7,000 1.2 5 ∼
1.0
Max. AC Max. Max.
ER32 1.0〜20.0 DC brushless 4,600 80
250 servo 220 16.7
motor
250〜 motor
SSV4-2017 16 15 13 Notes 1. The feed controller and the spindle inverter are standard accessories.
1,750
2. The programming console and touch panel is optionally available. The attached cable is 3m long.
3. Programming from a computer is possible using a ⑯ PC cable A. In such case, a dedicated computer monitoring software is required.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed) Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
7
Output COM Ground of command for spindle speed OUT1 Under Auto Operation
ⅠN0 Emergency stop OUT2 Program end
(195) 178
(188) 66.5
ⅠN1 Manual coolant ON/OFF OUT3 Origin
Output
245
261
275
Feed motor ⅠN2 Start up OUT4 Spindle ON
※2
ⅠN3 Machine zero return OUT5 Ready for single step
Power cable for
ⅠN4 Single step OUT6 Coolant ON
feed motor (5m)
shank insertion 58
Appropriate
Backward side OT
7
Air outlet for cooling +0.03 +0.03
ⅠN12 Manual spindle ON/OFF
6
225
241
255
170 250 758 ⅠN15 Program 4
Machine zero point
ⅠN16 Program 8
ⅠN17 Program 10
5 ⅠN18 Program 20
Notes 1. In the case of a servo motor with a holding brake (optional), the dimension of the feed motor is different. Dimensions (mm)/ 30.2 7
2. Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air. W116×D195.7×H255 (116) ⅠN19 Program 40
Weight/3.2kg ⅠN20 Program 80
8 9
SERVO series
Selfeeder
SSV5
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ120
φ59
other than those shown below, upon request.
Selfeeder
Aluminium SSV5-2055 Fig. 1 KH-32A
1 KH-32A
φ 25 Spindle speed
variable type
Long stroke SSV5-2610 Note : Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Large dia.
Steel drilling
Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
φ 18
Standard accessories User control panel
① Power cable・・・・・・・・・・・・・・・・・・・・・・・・ 0.7m
Programming console
DC24V
② Power cable for feed motor・・・・・・・・・・・ 5m
PC-03B 12 9 10
(option) ③ Signaling cable for feed motor・・・・・・・ 5m
other attachments
(prepared by customers)
⑭ PC cable A (option)・ ・・・・・・・・・・・・・・・・・ 2m
Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight 5
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C) Laptop computer 6
(prepared by customers) 2
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg 14 Power supply for spindle
3 Three-phase AC200V
13 ∼
800〜
SSV5-2055 ER32 1.0〜20.0 14.5 11.5 9.5
5,500 2.7
1.6
Max. AC Max. Max.
DC brushless 7,760 100
300 servo 300 16.7
motor Notes 1. The feed controller and the spindle inverter are standard accessories.
150〜 motor
SSV5-2610 ER40 2.0〜30.0 25 20.5 18 2. The programming console and touch panel is optionally available. The attached cable is 3m long.
1,010 3. Programming from a computer is possible using a ⑭ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3.
4.
The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number. Controller for feed motor UC-83A Specification of signal
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions(mm) 133.2
I/O Signal Contents I/O Signal Contents
ORD Command for spindle speed OUT0 RDY
Dimensions
51 12 57
2-φ5 Analog
(mm)
7
Output COM Ground of command for spindle speed OUT1 Under Auto Operation
17.4
ⅠN0 Emergency stop OUT2 Program end
ⅠN1 Manual coolant ON/OFF OUT3 Origin
(φ150)
240.2
261
275
※2
Power cable for Feed motor ⅠN3 Machine zero return OUT5 Ready for single step
feed motor (5m)
ⅠN4 Single step OUT6 Coolant ON
φ120
φ63
Air supply port for ⅠN8 Forward side OT ※2 Voltage: DC24V, Electric current: 90mA
465
φ120
Depth of tool shank insertion 60 Appropriate tube (Combine with origin LS)
external diameter φ8
Input NC No contact terminal
Power cable for
※1
Dimensions(mm)
φ120
272.4
Full stroke
257
200 300 871
ⅠN16 Program 8
Machine zero point
ⅠN17 Program 10
ⅠN18 Program 20
Notes 1. In the case of a servo motor with a holding brake (optional), the dimension of the feed motor is different. Dimensions (mm)/
7 7
ⅠN19 Program 40
9
W182×D177×H272.4
15.4
2. Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
Weight/5.7kg ⅠN20 Program 80
10 11
SERVO series
Selfeeder
SSM4
Please specify the adjustable spindle nose
when ordering your servo drill.
φ32.4
φ47
φ28
φ47
φ60
φ60
Sugino supplies adjustable spindle noses
varimec
other than those shown below, upon request. 27.5 51.5
45 20 69 20
65 89
Multi-spindle Spindle speed 95 119
heads attachable variable type Applicable selfeeder Fig. No. Spindle nose model No.
Selfeeder
Aluminium SSM4-1673、SSM4-1636 1 KH-16A Fig. 1 KH-16A Fig. 2 KH-22A
Coolant
16
Small dia. and
φ deep hole drilling center-through SSM4-1618、SSM4-1608 2 KH-22A Note : Spindle noses KH-A model is applicable to the quick change stub holder of KH-A model of NT Tool Co.,Ltd.
Mechatric
Steel Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
φ 11 User control panel
Standard accessories
① Power cable・・・・・・・・・・・・・・・・・・・・・・・・ 0.7m
Programming console
PC-03B 13 10 11 DC24V ② Signaling cable for feed motor・・・・・・・ 5m
(option) PLC, etc ③ Power cable for feed motor・・・・・・・・・・・ 5m
other attachments
Chuck type Chucking Spindle Feed Cutting ⑭ Power cable for spindle motor (prepared
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed by customers)
(ADC) (FC200) (S45C)
⑮ PC cable A (option)・ ・・・・・・・・・・・・・・・・・ 2m
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg
Laptop computer 2
SSM4-1673 1,470〜 7,320 6 5 4 0.75 (prepared by customers)
DC brushless motor 3
15 5
Rated speed 0.4
SSM4-1636 720〜 3,600 8 7 6 3,600min-1 6
Power supply for spindle
Max. AC Max. Max. Three-phase AC200V
ER25 0.5〜16 2,320 60 14 ∼
150 0.75 servo 150 16.7
SSM4-1618 360〜 1,800 11 9 8
DC brushless motor motor
Rated speed
SSM4-1608 180〜 880 16 12 11 1,800min-1 Notes 1. The feed controller and the spindle inverter are standard accessories.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed) 2. The programming console and touch panel is optionally available. The attached cable is 3m long.
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two. 3. Programming from a computer is possible using a ⑮ PC cable A. In such case, a dedicated computer monitoring software is required.
3. The power voltage of the main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.) Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
4. In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number.
5. "CL" is added to the end of model No. for coolant center-through specification.
6. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Controller for feed motor UC-81A Specification of signal
Dimensions (mm) Dimensions(mm) 21.5
85.5
64 2-φ5
I/O Signal Contents I/O Signal Contents
7
Spindle motor COM Ground of command for spindle speed OUT1 Under Auto Operation
149 106 668
15
ⅠN0 Emergency stop OUT2 Program end
Feed motor ⅠN1 Manual coolant ON/OFF OUT3 Origin
Output
ⅠN2 Start up OUT4 Spindle ON
※2
195
211
225
ⅠN3 Machine zero return OUT5 Ready for single step
ⅠN4 Single step OUT6 Coolant ON
ⅠN5 Spindle alarm OUT7 Forward Limit ON
365
Depth of
ER25 tool shank Dimensions (mm)/
15
φ50g6
W85.5×D168×H225 5
7
57 Weight/2.1kg 32 32
ⅠN7 JOG− ※1 Voltage: DC24V, Electric current: 10mA
φ60
φ42
110±1
120
45
ⅠN15 Program 4
56
45
ⅠN16 Program 8
30
12 13
SERVO series
Selfeeder
SSM5
Please specify the adjustable spindle nose
when ordering your servo drill.
Sugino supplies adjustable spindle noses
varimec
φ138
φ53
other than those shown below, upon request.
25
Small dia. and
Long stroke
deep hole drilling Applicable selfeeder Fig. No. Spindle nose model No.
98
Selfeeder
Aluminium Fig. 1 KH-32EC
Large dia. Coolant SSM5-26**BCL 1 KH-32EC
φ 24 drilling center-through Note : Spindle noses KH-EC model is applicable to the quick change stub holder of KH-EC model of NT Tool Co.,Ltd.
Mechatric
Electric system diagram
Linear guide All the electric parts supplied as standard are indicated in box.
Steel The purchaser is responsible for and needs to have the other cables and equipment.
φ 19 User control panel
Standard accessories
① Power cable・・・・・・・・・・・・・・・・・・・・・・・・ 0.7m
Programming console
PC-03B DC24V ② Power cable for feed motor・・・・・・・・・・・ 5m
11 9
(option)
PLC, etc ③ Signaling cable for feed motor・・・・・・・ 5m
Specification Chart
Touch panel 6 ⑪ Noise filter
TP-01
(option) 5 ⑫ PC cable A (option)) ・ ・・・・・・・・・・・・・・・・ 2m
other attachments
AL* FC* ST* Stroke Thrust approach Weight
50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg
SSM5-2641BCL 4,100 4,900 8 4 4
Laptop computer
2.2
SSM5-2634BCL 3,400 4,000 9 5 5 (prepared by customers)
Induction motor 12 3
SSM5-2625BCL 2,500 3,000 12 6 6 2
Power supply for spindle
Three-phase AC200V
SSM5-2621BCL 2,100 2,500 10 5 5 2.7 7 ∼
Max. AC Max. Max.
SSM5-2617BCL 1,700 2,000 ER40 10~26 12 6 6 1.5 5,000 230
300 servo 300 16.7
SSM5-2611BCL 1,100 1,300 16 9 8 Induction motor motor
Notes 1. The feed controller is standard accessories.
SSM5-2607BCL 700 850 19 14 12.5 2. The programming console and touch panel is optionally available. The attached cable is 3m long.
SSM5-2604BCL 400 480 19 15 13.5 0.75 3. Programming from a computer is possible using a ⑫ PC cable A. In such case, a dedicated computer monitoring software is required.
Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
SSM5-2602BCL 220 260 24 21 19 Induction motor
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2.
3.
The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
The power voltage of the feed controller and main spindle inverter is a 3-phase 200V AC±10%, 50/60Hz.
Controller for feed motor UC-83A Specification of signal
4. Holding brake is attached to the feed motor.
5.
6.
Coolant center-through is used for SSM5 as standard specification. Please direct if you do not need it.
AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions(mm) 133.2
I/O Signal Contents I/O Signal Contents
2-φ5
51 12 57 ⅠN0 Emergency stop OUT0 RDY
7
Dimensions
ⅠN1 Manual coolant ON/OFF OUT1 Under Auto Operation
17.4
(mm)
ⅠN2 Start up OUT2 Program end
ⅠN3 Machine zero return OUT3 Origin
Air supply port Spindle motor Output
ⅠN4 Single step OUT4 Spindle ON
240.2
261
275
Rc1/8 ※2
ⅠN5 Spindle alarm OUT5 Ready for single step
ER40
Mounting spindle ⅠN6 JOG+ OUT6 Coolant ON
Width across flat 55 ⅠN7 JOG− OUT7 Forward Limit ON
Dimensions (mm)/
5 ⅠN8 Forward side OT OUT8 Alarm
510
W133.2×D216×H275 40.5
φ138
φ63
ⅠN17 Program 10
ⅠN18 Program 20
115
ⅠN19 Program 40
ⅠN20 Program 80
14 15
SERVO series
Selfeeder
MS3P MS7
varimec
Multi-spindle Small dia. and Multi-spindle
Long stroke
heads attachable deep hole drilling heads attachable
Selfeeder
Aluminium Aluminium
φ 14 Round
shaped body
φ 40 Large dia.
drilling
Mechatric
Steel Steel
φ 10 φ 28
other attachments
(ADC) (FC200) (S45C) speed
Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg Specs. Spindle speed (no load) Max. Drilling size Rapid
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke Thrust approach Weight
MS3P-3075LLZ 7.500 9,000 3 1.5 1.5 50Hz 60Hz (Collet chuck) capacity motor motor
speed
speed
(ADC) (FC200) (S45C)
MS3P-3060LLZ 6,000 7,200 4 1.5 1.5
ER11 0.5〜7 0.35 Model min-1 – mm mm mm mm mm kW kW N mm/sec mm/sec kg
MS3P-6049LLZ 4,900 5,900 5 2 2 2P
34 MS7-3229 2,900 3,500 11 4 3 3.7
MS3P-6034LLZ 3,400 4,100 7 3 3 Induction 4P
motor MS7-3222 2,200 2,700 13 5 4
MS3P-1326LLZ 2,600 3,200 7.5 3.5 3.5 0.4 Induction
AC Max. Max. MS7-3215 1,500 1,800 17 7 6 motor 2.7
MS3P-1318LLZ 1,800 2,200 8.5 5 4 150 1,760 AC Max. Max.
servo 200 16.7 MS7-3210 1,000 1,200 ER32 1.0〜20 20 14 12 200 7,800 270
MS3P-1314LLZ 1,400 1,700 9.5 6 6 motor 2.2 servo 298 16.7
MS7-3206 650 800 25 19 16 6P motor
MS3P-1310LLZ 1,000 1,200 ER20 0.5〜13 10 8 7 0.35
6P MS7-3205 500 600 31 24 21 Induction
MS3P-1307LLZ 700 800 12 9 8 35 motor
Induction MS7-3203 340 410 40 32 28
MS3P-1306LLZ 600 700 13.5 10.5 9 motor Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
MS3P-1305LLZ 500 600 14 12 10 2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
3. The power voltage of the feed controller and main spindle motor is a 3-phase 200V AC±10%, 50/60Hz.
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
4. In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number.
2. The drilling capacity shown above is for a depth equivalent to the drill diameter times two.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
3. The power voltage of the main spindle motor is a 3-phase 200V AC±10%, 50/60Hz. (Feeding axis controller is single-phase.)
4. In the case of a servo motor with a holding brake (optional), add “B” to the end of the model number.
Dimensions
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
(mm)
Dimensions (mm)
Signaling cable for
Power cable connection port φ27
feed motor 5m
250 312 105
Width across flat 12 Power cable for
Feed motor
MS3P-30**LLZ feed motor 5m
85
Spindle motor Power cable connection port G1/2
φ50g6
MS3P-60**LLZ
ER11 Mounting spindle
A
114
φ19
φ223
Depth of tool shank insertion Max.23 Width across flat 36
31
64 ER32
φ105
Mounting spindle
525
MS3P-13**LLZ
114
(488)
267
φ47
ER20 Mounting spindle
φ68
307.5
φ60 Symbol
−0.01
φ74−0.04
φ50
287
φ50g6 Model
Max.41.5
MS3P-3075LLZ
238
MS3P-3060LLZ
φ34
130
MS3P-6049LLZ
373 265 58
MS3P-6034LLZ
52
50
44.5
Clamping range MS3P-1326LLZ
Width across flat 24
+0.03 Depth of tool shank insertion Max.58
61 141 62 51 186 MS3P-1318LLZ 10 0
25
Signaling cable for feed motor
6
+0.03
20 137.5 172 10 0
Note : Please do not clamp over or plug the drain hole, and install the selfeeder to adjust the drain hole facing down.
16 17
SERVO series
CNC Turret Head Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
Max. Drilling size (mm)
Selfeeder
4TH3S
I/O cable (prepared by customers) ① Turret head (4TH3S)
② Controller (UC-121, UC-122)
Standard accessories
③ Power cable for indexing motor・・・・ 5m
varimec
User control circuit
Operation panel ④ LS cable・ ・・・・・・・・・・・・・・・・・・・・・・・・・・ 5m
OB-11(option)
10 2 ∼ Power supply ⑤ Proximity switch cable・ ・・・・・・・・・・・・ 5m
9 Three-phase AC200V
⑥ Sequencer
Linear guide Power cable (prepared by customers) ⑦ Terminal board for input signal and main power
Compact ⑧ selfeeder《varimec》
(JP PAT.)
Selfeeder
Aluminium 18 ⑨ Controller for feed motor
8 ⑩ Inverter for spindle motor
12
Spindle speed 4-spindle
φ variable type Turret 1 ⑪ Power cable for feed motor・・・・・・・・・ 5m
17 ⑫ Signaling cable for feed motor・・・・・ 5m
Programming console
7 ⑬ CS sensor/LS cable for spindle motor・ ・・ 5m
Mechatric
PC-03B (option)
Steel Touch panel 6 ⑭ Power cable for spindle motor・・・・・・ 5m
⑮ LS cable for detecting OT in forward direction
φ 8 TP-01 (option) 19 15 16
⑯ LS cable for detecting OT in backward direction
⑰ I/O cable (feed⇔Sequencer)
3 4 5 11 12 13 14 ⑱ Power cable (Control⇔feed)
⑲ Power Cable for holding brake
Compact sized turret which uses a Selfeeder “Varimec” as a drive unit. It has a tool change function so 1 machine can do 4 types of operations.
Specification Chart
(prepared by customers) (option)
Specs. Spindle speed (no load) Max. Drilling size Rapid Indexing time Notes 1. Operation panel, the programming console and touch panel is optionally available. The attached cable is 3m long.
Chuck type Chucking Spindle Feed Cutting
AL* FC* ST* Stroke motor motor Thrust approach speed Weight 2. Programming from a computer is possible using a PC monitor soft cable. In such case, a dedicated computer monitoring software is required.
50Hz 60Hz (Collet chuck) capacity speed 50Hz 60Hz
(ADC) (FC200) (S45C) Working environment: OS Windows 95/98/XP (The mode setting is necessary), Communication interface RS232C-port.
3. Turret rotation can operate from operation panel only. It is impossible for doing turret rotation from programming console, pouch panel and PC monitor software.
Model
other attachments
+ 1,000〜 7,000 6.5 5 4
0.4 0.4
Operation panel and Controller Specification of signal
SSV3-7100THB Max. Max.
DC brushless AC servo 1,660 73
4TH3S Stub holder 200
motor motor
200 Dimensions(mm) I/O Signal Contents
[ ]
Max. X110 Power “ON”
+ 265〜 2,650 KH-20E 2.6〜9.0 12 9 8 0.9 0.8
16.7
SSV3-1626THB NT tool Operation panel OB-11 Controller UC-121 (for SSV3) X111 Machine zero return
180
4. When you install this turret head into SSV3-7100THB, please set "under 7,000min-1" for spindle rotation speed.
5. Holding brake is attached to the feed motor. X117 Spare
6. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Operation panel OB-11 Digital switch Y50 All origin position
Dimensions
Y51 Selfeeder Origin
700
(mm) Connector for Controller
- - -
0 00
+ + +
850
- - -
0 00
connection
+ + +
Output
0 00
+ + +
A ※2 Y54 Alarm
+ + +
selfeeder《varimec》
Gear motor for turret rotation Turret head 4TH3S
SSV3-7100THB
KH-20E Mounting spindle SSV3-1626THB Y55 Run
Y56 Spare
°
40 230
(180) Cable connection point
80
40 520
150
Y57 Spare
233
213
321
Power
4-φ13 OV External I/O power 0V
70
37
+0.03 A Enlargement
79 96 10 19 102 10 0
Air supply port for ※2 Voltage: DC24V, Electric current: less or equal 100mA
16
- - -
233
213
0 00
321
+ + +
(φ126)
88
- - -
79 96 10 30 160 10
+0.03
10+0.03
0 00
6
6
0
0 Air supply port for
175 127 45 30 270 cooling spindle motor
135 4-φ11 + + +
Full stroke 302 40 655 Appropriate tube DSW12 DSW8 DSW7
208 157 250 external diameter φ8
997
365 Machine zero point
Note : Air must be supplied to cool the spindle motor as to protect the spindle bearings. Be sure to supply clean dry air.
Notes 1. UC-121 attaches to 4TH3S+SSV3 series and UC-122 attaches to 4TH3S+SSV4 series as standard. Automatic drilling machine
2. These dimensions are for UC-122. Inside of brackets ( ) indicates dimensions for UC-121. utilizing 4TH3S
18 19
SERVO series
CNC Turret Head Electric system diagram All the electric parts supplied as standard are indicated in box.
The purchaser is responsible for and needs to have the other cables and equipment.
Max. Drilling size (mm)
Selfeeder
4TH5 Standard accessories ① 4-axis Turret head 4TH5
② Controller (UC-110)
11
③ Signaling cable for feed motor・・・・・ 5m
varimec
④ Power cable for feed motor・・・・・・・・・ 5m
⑤ LS cable for feed motor・ ・・・・・・・・・・・ 5m
2 ⑥ Power cable for spindle motor・・・・・・ 5m
Spindle speed 1 ⑦ Signaling cable for spindle motor・・・ 5m
Linear guide ⑧ Cable for fan of spindle motor・・・・・・ 5m
variable type
Selfeeder
Aluminium ⑨ LS cable for turret rotation・ ・・・・・・・・ 5m
4-spindle ⑩ Motor cable for turret rotation・ ・・・・・ 5m
φ 20 Turret
Rigid tapping Teaching unit (option)
Cable length 3m 9
⑪ Operation panel (OB-02, Attached cable 3m)
10
Mechatric
Steel Laptop computer
(prepared by customers) 6
φ 13 7
8
PC cable (option)
Cable length 3m
3
Power supply
Three-phase AC200V 5
∼
Designed to integratge onto space-saving and high-efficient production machines, Power cable (prepared by customers)
the versatile it can combine plural kinds of process like facing, drilling, chamfering, tapping and other kinds of processing.
Operation panel and Controller Specification of Controller
Specification Chart
other attachments
Chuck type Chucking Spindle Feed Least input increment : 0.001mm
Stroke Thrust approach Weight
M 16 50Hz 60Hz (Collet chuck) capacity
AL* FC* ST*
(ADC) (FC200) (S45C)
motor motor
speed 50Hz 60Hz Least command increment : 0.001mm
Input commands Max. programmable dimension : 999999999.999mm
Model min-1 – mm mm mm mm mm kW kW N mm/sec sec sec kg Operation panel OB-02 Decimal point input.
Steel 14 11 9.5 Cutting feed rate : F mm/min direct command
4TH5-1660 Max.6,000 260
M 12 Stub holder 2.0 1.2
G00 Positioning G31 Skip function
30
M10 M8 M8
[ ]
Max. Max. Max. G01 Liner interpolation G53 Command in machine coordinate system
KH-25E 3.6〜16.0 AC servo AC servo 1.2 1.0 OPERATING BOX OB-02 G function
20 15 13 200 1,960 500 (Any other G code G04 Dwell G90 Absolute command
NT tool motor motor 原点 アラーム
4
ステップ
運転
Notes 1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
JOG
256
Z S T
NC Program
編集 原点復帰
サーボ ティーチング
OFF
2. The upper row of the maximum drilling/tapping capacity section shows the maximum drilling capacity. And lower row shows the maximum tapping capacity. ※1 M function (For external output) M50〜M57 : Codes for customer.
ステップ
MANU. EXT
3. The drilling capacity shown above is for a depth equivalent to the drill diameter times two. A spiral type or point type tapping tool is used for the tapping capacity section. 機械
原点復帰
Z軸
前進
Z軸
逆転
Special function RTAPX Tapping.
フィードホールド
Tapping capacities are conditional on the depth of tapping being limited to 1.5 times the tap diameter.
OFF ON
JOG
起動 リセット
4. Holding brake is attached to the feed motor. シングルブロック
主軸
正転
主軸
逆転 S function Command spindle speed, rotation start and stop.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
プログラム選択
OFF ON
タレット 主軸
3 7 1割出し 停止 T function Command assignment turret No. and turret index start.
Various calculate function ○(Available in NC program.)
MADE IN JAPAN
Alarm
M50〜M57 : Codes for customer.
534
840
275
External Reset
I/O signal Program No.1 (Assign program No.)
Program No.2 (Assign program No.)
Input signal Program No.4 (Assign program No.)
148 148 37 280 380 19 ※3 Program No.8 (Assign program No.)
25
25
20 21
SERVO series
Selfeeder
Sugino's program input system; high-efficiency and easy-operation. Additional Sugino products which can achieve high-efficient operations besides Selfeeder servo series.
varimec
All that is needed for operation on the same day is a connection
For controller UC-81A, 82 and 83A, Sugino has 3 options
Processing program NC automatic drilling machine with the main power supply. This is an NC automatic drilling machine
Selfeeder
Programming console Touch panel PC
1 PC-03B 2 TP-01 3 monitor soft
Mechatric
The same high-rigidity and high-power DC brushless motor and precise
Key input small sized monitor type Easy operation by touch panel Programming operation from your PC High rigidity spindle motor angular bearing as the Selfeeder Varimec are utilized. It is compact
Varimotor
Compact sized and light weight monitor which 5.7inch color type liquid crystal pouch Use exclusive type monitor software which can
sized spindle unit and capable of doing heavy cut processing.
can set the stroke and spindle rotation speed in panel. Beginners are also able to produce do programming operation from your PC. Special
a one touch operation. With minimal key strokes and operate CNC programs very easily. cable for connecting with your PC is required. Application
other attachments
(ADC) (FC200) (S45C)
Programming
No.03 Deep hole drilling (Step feed drilling) No.05 Drilling Counterboring
Dimensions(mm)
Applied for Deep hole Cutting feed Applied to perform Inching feed Cutting feed
14 process patterns included in drilling, generally referred counterboring after drilling. Fig.1(SSV2CM)
H
the UC-8* Controller. to as step drilling. Cutting Cutting feed Also applied to reduce
Air outlet for cooling motor
oil delivered to edge of burrs on the rear surface Depth of
Simply choose suitable pattern
φ50g5
φ11 tool shank insertion Air supply port Connector
drill bit because the drill Cutting feed at through hole drilling. Max.G Spindle motor
for your processing specification. Power cable
(50)
bit is pulled out of
φ40
φ62
φF
workpiece in each step
Pattern No. Function CS sensor cable
φ11
φ6
motion. (50) Clamping range
01 Drilling 16 121 40
02 High-speed deep hole drilling (Step feed drilling) C 191 129 14.5
B (500)
03 Deep hole drilling (Step feed drilling) Symbol Fig.
A B C D E F G H Ⅰ
04 Quill pipe drilling (Skip feed drilling) No.06 Drilling (with inching feed) No.09 Quill pipe drilling (with inching feed) Model No.
Fig.2(SSV3CM、SSV4CM、SSV5CM)
Power cable
05 Drilling Counterboring SSV2-7200CM 347 27 16 31 13
1 - - - -
06 Drilling (with inching feed) Applied to reduce Inching feed Cutting feed Inching feed Capable of inching feed Inching feed Inching feed SSV2-1039CM 361 41 28 35 19
H
Cutting feed Cutting feed CS sensor cable
07 High-speed deep hole drilling (with inching feed) burrs on the both for process pattern No.4 473 33 19 30 19
Inching feed Fast forward Inching feed SSV3-7100CM
08 Deep hole drilling (with inching feed) front and rear when drill biting and
80 482 42 320 34 27 6
09 Quill pipe drilling (with inching feed) surface. through-hole are Air supply port 60
Depth of tool shank insertion SSV3-1626CM 15
10 Drilling Counterboring (with inching feed) performed. Max.G
Spindle motor J Fragmentary view 486 46 42 32
2
11 Back chamfering Helps to reduce burrs. SSV4-2070CM
100 659.5 58 454.5 58
φAg5
12 Quill pipe multi-step drilling (with inching feed) J SSV4-2017CM 50 36
φF 8
13 2-step front/rear chamfering SSV5-2055CM
120 807.5 71 19 519 60
15 Non-step deep hole drilling Air outlet for cooling motor SSV5-2610CM 63 46
C D Clamping range E 15
Note : The B, C, F, G and H dimension in this drawing will changes with
B
the spindle specification which shown in the above capacity table.
22 23
201108 AS